| AmviSense® S-DM-100 | AMVIGOR ORGANICS PVT LTD |
|
AmviSense® S-DM-100 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicon...view more
AmviSense® S-DM-100 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicones exert a protective effect on the skin by forming a barrier that hinders the penetration of irritants and allergens, also helps to decrease trans epidermal water loss (TEWL). view less
Compliance Highlights Unavailable
|
Request Sample |
| AmviSense® S-DM-350 | AMVIGOR ORGANICS PVT LTD |
|
AmviSense® S-DM-350 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicon...view more
AmviSense® S-DM-350 is a Dimethicone, which is also known as polydimethylsiloxane, a fluid mixture of fully methylated linear siloxane polymers end-blocked with trimethylsiloxy units. It is the simplest and oldest silicone polymer. Dimethicone and silicones exert a protective effect on the skin by forming a barrier that hinders the penetration of irritants and allergens, also helps to decrease trans epidermal water loss (TEWL). view less
Compliance Highlights Unavailable
|
Request Sample |
| BELSIL® DM 10 | DKSH |
|
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. BELSIL® DM 10 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. wa...view more
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. BELSIL® DM 10 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. view less
Compliance Highlights Unavailable
|
Request Sample |
| BELSIL® eco DM 10 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 10 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 100 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 100 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 20 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 20 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 350 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 350 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 5 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun ca...view more
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun care. view less
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 60.000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun ca...view more
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care. view less
Compliance Highlights Unavailable
|
|
| BELSIL® OW 2100 DE | Wacker Chemie AG 瓦克化学 |
|
BELSIL® OW 2100 DE is a copolymer of polydimethylsiloxane and organic glycol. BELSIL® OW 2100 DE has good compatibility with a wide range of cosmetic ingredients, such as water and alcohol. It is stable in water systems.
Compliance Highlights Unavailable
|
|
| BELSIL® REG 1102 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. B...view more
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. BELSIL® REG 1102 can act as a thickener in formulations while delivering a smooth application. In addition it exhibits shear-thinning behavior. This attribute allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. view less
Compliance Highlights Unavailable
|
|
| BELSIL® REG 1102 | DKSH |
|
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. B...view more
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. BELSIL® REG 1102 can act as a thickener in formulations while delivering a smooth application. In addition it exhibits shear-thinning behavior. This attribute allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. view less
Compliance Highlights Unavailable
|
Request Sample |
| BRB 1739 | BRB International BV |
|
BRB 1739 is a clear solution of ultrahigh viscosity Dimethiconol fluid in a low viscosity dimethicone fluid. BRB 1739 is used in hand and body lotion, protective creams, colour cosmetics, shower gels, sun creams and lotions, moisturizing creams and lotion...view more
BRB 1739 is a clear solution of ultrahigh viscosity Dimethiconol fluid in a low viscosity dimethicone fluid. BRB 1739 is used in hand and body lotion, protective creams, colour cosmetics, shower gels, sun creams and lotions, moisturizing creams and lotions. view less
Compliance Highlights Unavailable
|
|
| BRB DM 1,5 | BRB International BV |
|
BRB DM 1,5 is a 1,5 cSt straight chained low viscosity silicone fluid with a fast evaporation. The unique volatility and excellent spreading of BRB DM 1,5 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants...view more
BRB DM 1,5 is a 1,5 cSt straight chained low viscosity silicone fluid with a fast evaporation. The unique volatility and excellent spreading of BRB DM 1,5 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, Hair Care and Color Cosmetics. Due to its low heat of vaporization BRB DM 1,5 does not cool the skin when it evaporates as other volatile carriers do. view less
Compliance Highlights Unavailable
|
|
| BRB DM 2 | BRB International BV |
|
BRB DM 2 is a 2 cSt straight chained low viscosity silicone fluid. The unique volatility and excellent spreading of BRB DM 2 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, ...view more
BRB DM 2 is a 2 cSt straight chained low viscosity silicone fluid. The unique volatility and excellent spreading of BRB DM 2 makes it an appreciated ingredient in every Personal Care application, such as Skin Care, deodorants & antiperspirants, Sun care, Hair Care and Color Cosmetics. Due to its low heat of vaporization BRB DM 2 does not cool the skin when it evaporates as other volatile carriers do. view less
Compliance Highlights Unavailable
|
|
| BRB DM 55 | BRB International BV |
|
BRB DM 55 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 55 can be used as a direct alternative to cyclopentasiloxane. BRB DM 55 is designed to be used in skin & body care, antiperspirant and deodorants...view more
BRB DM 55 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 55 can be used as a direct alternative to cyclopentasiloxane. BRB DM 55 is designed to be used in skin & body care, antiperspirant and deodorants, hair care, sun care and decorative cosmetics. view less
Compliance Highlights Unavailable
|
|
| BRB DM 66 | BRB International BV |
|
BRB DM 66 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 66 can be used as a direct alternative to cyclopentasiloxane (and) cyclohexasiloxane. BRB DM 66 is designed to be used in skin & body care, antip...view more
BRB DM 66 is a low viscosity silicone fluid with INCI dimethicone. Due to its similar sensory profile, BRB DM 66 can be used as a direct alternative to cyclopentasiloxane (and) cyclohexasiloxane. BRB DM 66 is designed to be used in skin & body care, antiperspirant and deodorants, hair care, sun care and decorative cosmetics. view less
Compliance Highlights Unavailable
|
|
| BRB Gum 443 | BRB International BV |
|
BRB GUM 443 is a dimethylsiloxane gum. It has been especially designed to manufacture master-batches of pigments, process additives, reinforcing and diluting fillers, for silicone elastomers as well as plastics and organic elastomers or Personal Care Gum ...view more
BRB GUM 443 is a dimethylsiloxane gum. It has been especially designed to manufacture master-batches of pigments, process additives, reinforcing and diluting fillers, for silicone elastomers as well as plastics and organic elastomers or Personal Care Gum blends. view less
Compliance Highlights Unavailable
|
|
| C33-7001D SunPURO® Dimethicone Treated Black Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Black Iron Oxide is self-heating and offers hydrophobicity, good dispersibility in oils and silicones, lubric...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Black Iron Oxide is self-heating and offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-8001D SunPURO® Dimethicone Treated Red Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Red Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear a...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunPURO® Dimethicone Treated Red Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-8073D SunCROMA® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, w...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-9001D SunPURO® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunPURO® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, we...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunPURO® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-A401D SunCROMA® Dimethicone Treated Black Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Black Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wea...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Black Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-A407D SunCROMA® Dimethicone Treated Yellow Iron Oxide | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, we...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application.SunCROMA® Dimethicone Treated Yellow Iron Oxide offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C33-A460D SunCROMA® Dimethicone Treated Red Iron Oxide Blend | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Red Iron Oxide Blend offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Red Iron Oxide Blend offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| C98-0001D SunCROMA® Dimethicone Treated Talc | Sun Chemical |
|
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Talc offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water...view more
Treated pigments impart performance benefits such as enhanced stability, improved skin feel, and ease of application. SunCROMA® Dimethicone Treated Talc offers hydrophobicity, good dispersibility in oils and silicones, lubricious skin feel, wear and water resistance, and aids in the compression of powders. view less
Compliance Highlights Unavailable
|
Request Sample |
| Dimethicone BT-200-5CS | Batai (Guangzhou) Chemical Co., Ltd. 巴泰（广州）化工有限公司 |
|
Dimethicone BT-200-5CS is a low viscosity, low molecular weight organic silicone fluid used as an additive in various cosmetic formulas. It has a clear and transparent appearance, and it offers excellent compatibility and dispersion properties. Formulated...view more
Dimethicone BT-200-5CS is a low viscosity, low molecular weight organic silicone fluid used as an additive in various cosmetic formulas. It has a clear and transparent appearance, and it offers excellent compatibility and dispersion properties. Formulated cosmetic products have better spreadability, workability, and tactility without greasy feel. view less
Compliance Highlights Unavailable
|
|
| Dimethisil® DM-12,500 | Innospec Performance Chemicals |
|
Dimethisil® DM-12,500 silicone fluid is a medium viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Dimethisil® DM-12,500 provides excellent spreading and lub...view more
Dimethisil® DM-12,500 silicone fluid is a medium viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Dimethisil® DM-12,500 provides excellent spreading and lubricity to personal care formulations. view less
Compliance Highlights Unavailable
|
Request Sample |
| Dimethisil® DM-6 | Innospec Performance Chemicals |
|
Dimethisil® DM-6 silicone fluid is a low viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care, and color cosmetics. Dimethisil® DM-5 provides excellent spreading and v...view more
Dimethisil® DM-6 silicone fluid is a low viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care, and color cosmetics. Dimethisil® DM-5 provides excellent spreading and volatility to personal care formulations. view less
Compliance Highlights Unavailable
|
Request Sample |
| DM-Fluid-A-6cs | Shin-Etsu Silicones 信越有机硅 |
|
DM-Fluid-A-6cs is a non-volatile silicone that has low viscosity and is easy to handle.
Compliance Highlights Unavailable
|
|
| DOWSIL™ 3901 Liquid Satin Blend | Dow Chemical - Home and Personal Care |
|
DOWSIL™ 3901 Liquid Satin Blend is a mixture of a high molecular weight polymer in dimethicone. With its novel, never-before-seen texture and distinctive sensory profile, this product enables formulations that not only deliver performance, but provide a d...view more
DOWSIL™ 3901 Liquid Satin Blend is a mixture of a high molecular weight polymer in dimethicone. With its novel, never-before-seen texture and distinctive sensory profile, this product enables formulations that not only deliver performance, but provide a distinctive experience and luxe satin-like feel. view less
Compliance Highlights Unavailable
|
Request Sample |
| InnoSil 1883-DM | Innospec Performance Chemicals |
|
InnoSil 1883-DM is a cyclic free composition of polydimethylsiloxanes, and an ultra-high molecular weight dimethiconol fluid.
Compliance Highlights Unavailable
|
Request Sample |
| iSil™ 1218 | KimiKa, LLC (Formerly Cosphatech) |
|
iSil™ 1218 is a mixture of high viscosity dimethiconol grease and low viscosity dimethicone oil, used as a conditioner to provide a lubricous, clear skin feel like velvet.
Compliance Highlights Unavailable
|
|
| iSil 3063 | KimiKa, LLC (Formerly Cosphatech) |
|
iSil 3063 is a colorless translucent paste and iscomposed of Dimethicone and Dimethicone/Vinyl Dimethicone Crosspolymer. iSil 3063 can be used in skin care, hair care, make-up, suncare, antiperspirants and deodorants, etc. It is easy to formulate and can ...view more
iSil 3063 is a colorless translucent paste and iscomposed of Dimethicone and Dimethicone/Vinyl Dimethicone Crosspolymer. iSil 3063 can be used in skin care, hair care, make-up, suncare, antiperspirants and deodorants, etc. It is easy to formulate and can be applied in cold process, it can reduce tackiness of formulations and provide dry, smooth and silky skin feel. Also, it can thicken grease in formulation. view less
Compliance Highlights Available
|
|
| KF-56A | Shin-Etsu Silicones 信越有机硅 |
|
KF-56A is a colorless, transparent liquid that is composed of Diphenylsiloxy Phenyl Trimethicone. This product features a high refractive index and a nice shine. It is used in various hair care, skin care, make-up, and sunscreen applications. KF-56A comes...view more
KF-56A is a colorless, transparent liquid that is composed of Diphenylsiloxy Phenyl Trimethicone. This product features a high refractive index and a nice shine. It is used in various hair care, skin care, make-up, and sunscreen applications. KF-56A comes ready to use, packaged in a 18kg can. view less
Compliance Highlights Available
|
|
| LexFilm™ Sun Natural MB | Inolex |
|
LexFilm™ Sun Natural MB is a 100% natural, multi-dimensional film-forming polymer for sun care applications. LexFilm™ Sun Natural MB is a optimized for sensory, SPF boosting, and water-resistance. LexFilm™ Sun Natural MB is pourable viscous fluid that is ...view more
LexFilm™ Sun Natural MB is a 100% natural, multi-dimensional film-forming polymer for sun care applications. LexFilm™ Sun Natural MB is a optimized for sensory, SPF boosting, and water-resistance. LexFilm™ Sun Natural MB is pourable viscous fluid that is compatible with organic and inorganic UV filters, providing an added benefit of inorganic UV filter dispersion. LexFilm™ Sun Natural MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. view less
Compliance Highlights Unavailable
|
Request Sample |
| LipFeel™ Natural MB | Inolex |
|
LipFeel™ Natural MB is a 100% natural and sustainable emollient, humectant, pigment dispersant and dye solubilizer used in lipstick, lip gloss and other in color cosmetics. It is colorless, odorless, tasteless and has performance properties similar to tho...view more
LipFeel™ Natural MB is a 100% natural and sustainable emollient, humectant, pigment dispersant and dye solubilizer used in lipstick, lip gloss and other in color cosmetics. It is colorless, odorless, tasteless and has performance properties similar to those of castor oil. LipFeel™ Natural MB is highly resistant to lipid oxidation and thus it forms lip products with extended shelf-life and without the strong odor and strong taste associated with oils. LipFeel™ Natural MB is suitable as an alternative to the typical natural and synthetic oils (e.g., vegetable oils, esters, polyisobutene) used on color cosmetics. It improves lip feel, as well as dramatically enhancing shine and texture in lip care products. It can be used in cosmetic pigment dispersions, lip and color cosmetics, balms and glosses, creams, lotions, ointments, bath and body care products, and all-natural lip products. LipFeel™ Natural MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. view less
Compliance Highlights Available
|
Request Sample |
| LX SERICITE DSM | LUXON Co., Ltd. |
|
LX SERICITE DSM is part of a series that consists of surface treated sericite with artificial or natural coating agents. It has excellent hydrophobicity, so it is widely used in W/O and W/S emulsion oil dispersion and powder products. It provides milk ski...view more
LX SERICITE DSM is part of a series that consists of surface treated sericite with artificial or natural coating agents. It has excellent hydrophobicity, so it is widely used in W/O and W/S emulsion oil dispersion and powder products. It provides milk skin feeling and excellent affinity to skin when applied in formulation. view less
Compliance Highlights Available
|
Request Sample |
| METROARK 05 FLUID | DKSH |
|
METROARK 05 FLUID is a clear, colourless fluid of low viscosity, and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, alcohols, Esters and other solvents frequently utilised in personal-care formulations. Due to its ...view more
METROARK 05 FLUID is a clear, colourless fluid of low viscosity, and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, alcohols, Esters and other solvents frequently utilised in personal-care formulations. Due to its low heat of vaporisation, Metroark 05 Fluid evaporates from the skin without producing a cooling or stinging effect. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| Mfsorb® 622 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 622 is mainly used for PE longevity film, but also used for polyurethane, and polyacetal, especially for nylon11 and nylon 12 polyester elastomers have a synergistic effect with UV absorber, and have excellent anti-oxidation effect, good compatibi...view more
Mfsorb® 622 is mainly used for PE longevity film, but also used for polyurethane, and polyacetal, especially for nylon11 and nylon 12 polyester elastomers have a synergistic effect with UV absorber, and have excellent anti-oxidation effect, good compatibility with resin, widely used in polyolefin food packaging materials. view less
Compliance Highlights Available
|
||
| Mfsorb® 783 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 783 is a high molecular weight hindered amine light stabilizer that exhibits excellent light and long-term thermal stability, low volatility and extraction resistance, and good compatibility with most polymers. This product is suitable for polyole...view more
Mfsorb® 783 is a high molecular weight hindered amine light stabilizer that exhibits excellent light and long-term thermal stability, low volatility and extraction resistance, and good compatibility with most polymers. This product is suitable for polyolefin materials, especially effective in PP fiber, tape, thin or thick LLDPE, and LDPE products. view less
Compliance Highlights Available
|
||
| Mfsorb® 944 | MFCI Co.,Ltd. 湖北美峰贸易有限公司 |
Mfsorb® 944 is one kind of high molecular light stabilizer, with multiple functional groups. lt can be used in low-density PE film, PP tape, EVA film, ABS, PP fiber, PPE, polyacetals, polyamides, and polyurethanes. PVC, PVC blending material, polystyrene...view more
Mfsorb® 944 is one kind of high molecular light stabilizer, with multiple functional groups. lt can be used in low-density PE film, PP tape, EVA film, ABS, PP fiber, PPE, polyacetals, polyamides, and polyurethanes. PVC, PVC blending material, polystyrene, rubber, and viscose, it can work with UV adsorbent because of its special structure and large molecular weight (3000). view less
Compliance Highlights Available
|
||
| Microcare® Silicone DM350 | THOR |
|
Microcare® Silicone DM350 is a linear polydimethylsiloxanesilicone fluid with a low viscosity and a low molecular weight. Microcare® Silicone DM350 is a siloxane with potential use in numerous personal care applications including skin care, hair care, col...view more
Microcare® Silicone DM350 is a linear polydimethylsiloxanesilicone fluid with a low viscosity and a low molecular weight. Microcare® Silicone DM350 is a siloxane with potential use in numerous personal care applications including skin care, hair care, colour cosmetics, sun care and antiperspirants/deodorants. view less
Compliance Highlights Available
|
|
| MIRASIL™ D-DMB | Elkem Silicones |
|
MIRASIL™ D-DMB is a blend of a Dimethicone gum of very high viscosity at 15% in a low viscosity Dimethicone. Easy to handle blend of high molecular weight Dimethicone.
Compliance Highlights Available
|
|
| MIRASIL™ DM 10 | Elkem Silicones |
|
MIRASIL™ DM 10 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 100 | Elkem Silicones |
|
MIRASIL™ DM 100 is a linear polydimethylsiloxane fluid with a low viscosity and molecular weight. Suggested applications include skin care, deodorant and antiperspirant, make-up remover, shaving lotion and shaving foam as well as sun products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 1000 | Elkem Silicones |
|
MIRASIL™ DM 1000 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIR...view more
MIRASIL™ DM 1000 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRASIL™ DM 1000 is ideal for use in skin care, deodorant and antiperspirant, make-up remover, shaving lotion and foam as well as sun products. view less
Compliance Highlights Available
|
|
| MIRASIL™ DM 2 | Elkem Silicones |
|
MIRASIL™ DM 2 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 300 000 | Elkem Silicones |
|
MIRASIL™ DM 300 000 is a high molecular weight linear polydimethylsiloxane that is typically used as conditioning agents for skin and hair formulations. MIRASIL™ DM 300 000 is ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 350 | Elkem Silicones |
|
MIRASIL™ DM 350 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRA...view more
MIRASIL™ DM 350 is a linear polydimethylsiloxane fluid with a variety of viscosities and molecular weights. As the viscosities and molecular weight vary, the properties such as softness, lubricity, reduction of tackiness, and water repellency change. MIRASIL™ DM 350 is ideal for use in skin care, deodorant and antiperspirant, make up remover, shaving lotion, shaving foam and sun products. view less
Compliance Highlights Available
|
|
| MIRASIL™ DM 5 | Elkem Silicones |
|
MIRASIL™ DM 5 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.
Compliance Highlights Available
|
|
| MIRASIL™ DM 50 | Elkem Silicones |
|
MIRASIL™ DM 50 is a linear polydimethylsiloxane fluid with a low viscosity and molecular weight. Applications include skin care, deodorant and antiperspirants, make-up remover, shaving lotions, shaving foam and sun products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 500 | Elkem Silicones |
|
MIRASIL™ DM 500 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight. It is ideal for use in skin care, deodorants and antiperspirants, make up removers, and sun protections.
Compliance Highlights Available
|
|
| MIRASIL™ DM 500 000 | Elkem Silicones |
|
MIRASIL™ DM 500 000 is a high molecular weight linear polydimethylsiloxane that is typically used as conditioning agents for skin and hair formulations. MIRASIL™ DM 500 000 ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| MIRASIL™ DM 5000 | Elkem Silicones |
|
MIRASIL™ DM 5000 is a high molecular weight linear polydimethylsiloxane, typically used as conditioning agent for skin and hair formulations.
Compliance Highlights Available
|
|
| MIRASIL™ DM 60 000 | Elkem Silicones |
|
MIRASIL™ DM 60 000 is a high molecular weight linear polydimethylsiloxane. It is typically used as a conditioning agent for skin and hair formulations. MIRASIL™ DM 60 000 is ideal for use in skin care, hair care and sun care products.
Compliance Highlights Available
|
|
| Polyderm PE-PA-ED | DKSH |
|
Polyderm PE-PA-ED from Alzo International is a water based polyurethane/polyether micro- emulsion, soft, durable and flexible water resistant film, fixative for hair and mascaras.
Compliance Highlights Unavailable
|
Request Sample |
| SA-C337001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...view more
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. view less
Compliance Highlights Available
|
Request Sample |
| SA-C338001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...view more
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. view less
Compliance Highlights Available
|
Request Sample |
| SA-C339001-10 | Miyoshi Europe |
|
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties,...view more
SA is the ultimate patented Silicone treatment for application to cosmetic pigments and substrates and is composed of bonded Dimethicone. SA treatment brings a very unique silky touch to your cosmetic formulas while enhancing their longlasting properties, especially in powders application. Highly recommended on pearls, it brings out their natural luster and shine, contrary to many other types of treatments that may dull their effects. view less
Compliance Highlights Available
|
Request Sample |
| SILIKE 1000 | Maian |
|
SILIKE 1000 is a medium-viscosity product with excellent detangling power that improves compatibility, controls frizz, and provides softness and shine. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949...view more
SILIKE 1000 is a medium-viscosity product with excellent detangling power that improves compatibility, controls frizz, and provides softness and shine. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949 and SILIKE 650; together they can increase the product's spreadability and enhance the perception of silkiness, softness, and hair care, in addition to improving shine and combing and maintain hydration. view less
Compliance Highlights Unavailable
|
|
| SILIKE 10.000 | Maian |
|
SILIKE 10.000 has lubricating properties that help reduce volume, reduce frizz, and maintain hydration. It provides a smooth sensation, improving gliding and hydration in products for the hair and skin. It improves wet combing and untangling of hair and p...view more
SILIKE 10.000 has lubricating properties that help reduce volume, reduce frizz, and maintain hydration. It provides a smooth sensation, improving gliding and hydration in products for the hair and skin. It improves wet combing and untangling of hair and provides stiffness. view less
Compliance Highlights Unavailable
|
|
| SILIKE 350 | Maian |
|
SILIKE 350 is a medium viscosity fluid product with excellent de-tangling power. It improves compatibility, controls frizz, and provides softness, shine, and good spreadability. A striking feature of SILIKE's is to promote a smooth and silky feel to the h...view more
SILIKE 350 is a medium viscosity fluid product with excellent de-tangling power. It improves compatibility, controls frizz, and provides softness, shine, and good spreadability. A striking feature of SILIKE's is to promote a smooth and silky feel to the hair, especially SILIKE 949, SILIKE 350, and SILIKE 650; together they can increase the product's spreadability and accentuate the perception of silkiness, and smoothness of the hair, in addition to improving shine, compatibility and maintain hydration. view less
Compliance Highlights Unavailable
|
|
| SILIKE 60.000 | Maian |
|
SILIKE 60.000 is an alternative to silicones, maintaining similar performance, physical-chemical characteristics, and sensorial. SILIKE 60.000 is a versatile product developed to innovate cosmetic products. It presents a soft, unique, and remarkable senso...view more
SILIKE 60.000 is an alternative to silicones, maintaining similar performance, physical-chemical characteristics, and sensorial. SILIKE 60.000 is a versatile product developed to innovate cosmetic products. It presents a soft, unique, and remarkable sensorial while promoting shine and spreadability. This product helps provide a good combing in dry and wet hair, moisturizing and improving sliding in the applications. It is suitable for use in body care products, creams, and make-up and skin care. view less
Compliance Highlights Unavailable
|
|
| Silky Elastic Fluid BT-1166 | Batai (Guangzhou) Chemical Co., Ltd. 巴泰（广州）化工有限公司 |
|
Silky elastic fluid BT-1166 as mixture contains organosilicon polymer which in high molecular weight and PDMS.The appearance looks transparent and ropy.It shows strong wire-drawing effect and excellent lightly \ silky smooth \ moisture skin feeling;it is ...view more
Silky elastic fluid BT-1166 as mixture contains organosilicon polymer which in high molecular weight and PDMS.The appearance looks transparent and ropy.It shows strong wire-drawing effect and excellent lightly \ silky smooth \ moisture skin feeling;it is easy to spread on the skin surface.After using,it can form a complete uniform film that provides you silky feeling for long time.When apply to formula,it makes that soft silky and lightly feeling.It can be used in all oil system \ W\O \ W\Si system as wire-drawing provider.Of course,it also can be combined with drawing agent which used in water-based,make the O\W system acts stronger wire-drawing effect and long-lasting. view less
Compliance Highlights Unavailable
|
|
| Soltex™ INO Polymer | Dow Chemical - Home and Personal Care |
|
Soltex™ INO Polymer is a SPF booster for Inorganic UV Filters/Particulate UV Filters. Soltex™ INO Polymer enhances the efficacy of inorganic particles (TiO2, ZnO, metal oxides) by improving their overall dispersion in a formulation resulting in a boost of...view more
Soltex™ INO Polymer is a SPF booster for Inorganic UV Filters/Particulate UV Filters. Soltex™ INO Polymer enhances the efficacy of inorganic particles (TiO2, ZnO, metal oxides) by improving their overall dispersion in a formulation resulting in a boost of SPF performance of sunscreens and a more even pigments distribution. It is ideal for use in sunscreens, cream and lotion formulations, and color cosmetics. view less
Compliance Highlights Unavailable
|
Request Sample |
| Sunsafe® T201CD | Uniproma |
|
Sunsafe® T201CD is a UVB inorganic filter. It is a inorganic UV Filter with excellent transparency, smoothness, soft feeling compared to TiO2 when used in cosmetics. An inorganic UVB filters coated with Silica and Dimethicones. Specially developed for sy...view more
Sunsafe® T201CD is a UVB inorganic filter. It is a inorganic UV Filter with excellent transparency, smoothness, soft feeling compared to TiO2 when used in cosmetics. An inorganic UVB filters coated with Silica and Dimethicones. Specially developed for synergy with Sunsafe ABZ. High transparency and good sun protection effect. Good dispersibility. view less
Compliance Highlights Available
|
|
| TEQFEEL 100 | Kale Care Chemicals |
|
TEQFEEL 100 is a 100% polydimethylsiloxane of viscosity 100 mm2/s. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low-viscosity di...view more
TEQFEEL 100 is a 100% polydimethylsiloxane of viscosity 100 mm2/s. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low-viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones. It gives excellent softness, shine, a soft-slippery-silky feeling, healing effect for shampoos. TEQFEEL 100 can be used for sunscreen, makeup, lotion, shampoo, hair spray and mousses. view less
Compliance Highlights Available
|
|
| TEQFEEL 1000 | Kale Care Chemicals |
|
TEQFEEL 1000 is a 100% polydimethylsiloxane of viscosity 1000 mm2/s. It is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimet...view more
TEQFEEL 1000 is a 100% polydimethylsiloxane of viscosity 1000 mm2/s. It is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. TEQFEEL 1000 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. It gives excellent softness, shine,soft-slippery-silky feeling, healing effect for shampoos. TEQFEEL 1000 can be used for sunscreen, makeup, lotion, shampoo, hair spray and mousses. view less
Compliance Highlights Available
|
|
| TEQFEEL 350 | Kale Care Chemicals |
|
TEQFEEL 350 is a 100% polydimethylsiloxane of viscosity 350 mm2/s. Low-viscosity linear Dimethicone with colorless transparent appearance with no odor. It can provide clear and non greasy feel, free of skin irritation. It’s mainly used in cosmetic and per...view more
TEQFEEL 350 is a 100% polydimethylsiloxane of viscosity 350 mm2/s. Low-viscosity linear Dimethicone with colorless transparent appearance with no odor. It can provide clear and non greasy feel, free of skin irritation. It’s mainly used in cosmetic and personal care products. The product differs from organic materials in its physical and chemical properties such as high and low temperature stability, good dielectric properties, low interfacial energy, and chemical inertness. TEQFEEL 350 can also be used in a widerange of applications ranging from heat transfer media and hydraulic fluids to polish and antifoam formulation. view less
Compliance Highlights Available
|
|
| Vellaplex™ MB | Inolex |
|
Vellaplex™ MB is a multi-dimensional 100% natural polymer derived entirely from renewable and sustainable building blocks. Vellaplex™ MB creates a flexible natural barrier film that confers superior moisturization to the skin. It is ideal for use in a wid...view more
Vellaplex™ MB is a multi-dimensional 100% natural polymer derived entirely from renewable and sustainable building blocks. Vellaplex™ MB creates a flexible natural barrier film that confers superior moisturization to the skin. It is ideal for use in a wide range of cosmetic applications, including natural products, skin and face care, hair care, and color cosmetics. Vellaplex™ MB is readily biodegrable, contains 100% biobased content as certified by the USDA BioPreferred® Program, is COSMOS approved, and is approved for use in NSF/ANSI 305 certified personal care products. view less
Compliance Highlights Available
|
Request Sample |
| WACKER® AK 0.65 | DKSH |
|
WACKER® AK 0.65 is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, BELSIL® ...view more
WACKER® AK 0.65 is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, BELSIL® AK 0.65 evaporates from the skin without producing a cooling or stinging effect. BELSIL® AK 0.65 evaporates rapidly and without residues. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® AK 20 | DKSH |
|
WACKER® AK 20 is approx. 20 mm²/s. Due to its chemical structure, WACKER® AK 20 has an outstanding property profile, which sets it apart from organic materials such as mineral oils. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philip...view more
WACKER® AK 20 is approx. 20 mm²/s. Due to its chemical structure, WACKER® AK 20 has an outstanding property profile, which sets it apart from organic materials such as mineral oils. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® E 1656 | DKSH |
|
WACKER® E 1656 is an oil-in-water emulsion of an aminofunctional polydimethylsiloxane. WACKER® E 1656 is stabilized by nonionic emulsifiers. Therefore, combination of WACKER® E 1656 with other emulsions is facilitated in many cases. Available in Sri Lanka...view more
WACKER® E 1656 is an oil-in-water emulsion of an aminofunctional polydimethylsiloxane. WACKER® E 1656 is stabilized by nonionic emulsifiers. Therefore, combination of WACKER® E 1656 with other emulsions is facilitated in many cases. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® E3154 | DKSH |
|
WACKER® E3154 is a nonionic oil-in-water-emulsion of a medium viscosity polydimethylsiloxane dispersed in water. Even in diluted form, the emulsion is well stable with regard to shear stress. In addition, it exhibits excellent wetting and spreading proper...view more
WACKER® E3154 is a nonionic oil-in-water-emulsion of a medium viscosity polydimethylsiloxane dispersed in water. Even in diluted form, the emulsion is well stable with regard to shear stress. In addition, it exhibits excellent wetting and spreading properties. WACKER® E 3154 can easily be incorporated into coldstirred formulations. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| WACKER® FC 201 | DKSH |
|
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabric softeners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore WACKER® FC 201 protects textiles, especially cotton-polyester union cloth, for wr...view more
WACKER® FC 201 is a nonionic 60% Polysiloxan emulsion for fabric softeners. WACKER® FC 201 is a one-component system which is cross-linking at higher temperatures. Therefore WACKER® FC 201 protects textiles, especially cotton-polyester union cloth, for wrinkles and improves handle and easy ironing properties. Available in Sri Lanka, South Korea, Indonesia, Malaysia, Myanmar, Philippines, Thailand, Vietnam, Singapore, and India. view less
Compliance Highlights Unavailable
|
Request Sample |
| X-21-5849 | Shin-Etsu Silicones 信越有机硅 |
|
X-21-5849 is a colorless to light yellow liquid that is transparent to slightly hazy and is composed of Dimethiconol. This product features a long lasting film for both rinsed and non rinsed products. It is used in make-up, hair care, and skin care applic...view more
X-21-5849 is a colorless to light yellow liquid that is transparent to slightly hazy and is composed of Dimethiconol. This product features a long lasting film for both rinsed and non rinsed products. It is used in make-up, hair care, and skin care applications. X-21-5849 comes ready to use packaged in either a 18kg can or a 180kg drum. view less
Compliance Highlights Unavailable
|
|
| XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt | Dow Chemical - Home and Personal Care |
|
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is a colorless, clear polydimethylsiloxane fluid. It imparts soft, velvety skin feel, and spreads easily on both skin and hair.
Compliance Highlights Unavailable
|
Request Sample |
