| Aminol® CM Flakes | Innospec Performance Chemicals |
|
Aminol® CM Flakes is a superamide for use in personal care products, such as shampoos, bubble baths and liquid hand soaps. Aminol® CM Flakes is used as a foam booster and stabilizer, lime soap dispersant, thickener and viscosity builder and gelling agent....view more
Aminol® CM Flakes is a superamide for use in personal care products, such as shampoos, bubble baths and liquid hand soaps. Aminol® CM Flakes is used as a foam booster and stabilizer, lime soap dispersant, thickener and viscosity builder and gelling agent. It also has good detergency and enhances wetting properties when used in combination with other surface active agents. view less
Compliance Highlights Available
|
Request Sample |
| BergaSoft SCG22 | Berg + Schmidt GmbH & Co. KG |
|
BergaSoft SCG22 is a transparent to pale yellowish liquid with 22% active matter.
Compliance Highlights Available
|
|
| EMPILAN® 2502 | Innospec Performance Chemicals |
EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as l...view more
EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation. view less
Compliance Highlights Unavailable
|
Request Sample | |
| EMPILAN® 2502 / MB | Innospec Performance Chemicals |
EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This pr...view more
EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.
This makes it an ideal co-surfactant for laundry products (liquid and powder) and other detergent products such as dish-wash liquids. view less
Compliance Highlights Unavailable
|
Request Sample | |
| EMPILAN® CIS | Innospec Performance Chemicals |
|
EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the vis...view more
EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the viscosity of liquid formulations. EMPILAN® CIS is mostly used in personal care formulations such as shampoos, bath products, shower gels and hand soaps but it can be present in liquid detergents. It may also act as solubiliser for perfumes and essential oils. view less
Compliance Highlights Unavailable
|
Request Sample |
| EMPILAN® CME/T | Innospec Performance Chemicals |
|
EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard ...view more
EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution or emulsification of oils and other hydrophobic ingredients in formulations as well as helping to remove greasy soils in cleaning applications. view less
Compliance Highlights Unavailable
|
Request Sample |
| EMPILAN® KI 6 | Innospec Performance Chemicals |
|
EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively...view more
EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range. view less
Compliance Highlights Unavailable
|
Request Sample |
| Pureact SCG | Innospec Performance Chemicals |
|
Pureact SCG is a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. ...view more
Pureact SCG is a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant. Pureact SCG MB, a RSPO mass balanced version, is available upon request. view less
Compliance Highlights Unavailable
|
Request Sample |
| Pureact SCG MB | Innospec Performance Chemicals |
|
Pureact SCG MB is a RSPO mass balanced version of Pureact SCG, a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also ...view more
Pureact SCG MB is a RSPO mass balanced version of Pureact SCG, a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant. view less
Compliance Highlights Unavailable
|
Request Sample |
| RonaCare® Nicotinamide | Merck KGaA |
|
RonaCare® Nicotinamide is a multifunctional active ingredient with outstanding skin compatibility. This water-soluble vitamin B3 brings multiple topical benefits to enhance skin’s appearance and texture.
RonaCare® Nicotinamide combats the visual effects ...view more
RonaCare® Nicotinamide is a multifunctional active ingredient with outstanding skin compatibility. This water-soluble vitamin B3 brings multiple topical benefits to enhance skin’s appearance and texture.
RonaCare® Nicotinamide combats the visual effects of aging on several fronts. It improves the skin’s barrier, i.e. the skin’s first line of defense, helping to protect slin against moisture loss and dehydration. It is an effective tool to reduce fine lines and wrinkles, tighten and minimize enlarged pores and improve oily skin due to its sebum lowering activity. Another great effect is its ability to influence skin pigmentation by down regulating the transfer of melanosomes from melanocytes to keratinocytes. That’s why RonaCare® Nicotinamide can be used to brighten skin and reduce hyperpigmentation disorders such as age spots and melasma. RonaCare® Nicotinamide is suitable for all skin types. view less
Compliance Highlights Available
|
Request Sample |
| RonaCare® Urea beads | Merck KGaA |
|
RonaCare® Urea beads are white to almost white small beads. As part of the natural moisturizing factor (NMF) in our skin, urea is one of the most popular moisturizing ingredients used in cosmetics. To best serve your specific formulation needs, we provide...view more
RonaCare® Urea beads are white to almost white small beads. As part of the natural moisturizing factor (NMF) in our skin, urea is one of the most popular moisturizing ingredients used in cosmetics. To best serve your specific formulation needs, we provide highly pure cosmetic grade urea in two versions: RonaCare® Urea beads and RonaCare® Urea cryst. Two different crystal morphologies but one common set of benefits for a well-hydrated, plump and youthful-looking skin! view less
Compliance Highlights Available
|
Request Sample |
| RonaCare® Urea cryst. | Merck KGaA |
|
RonaCare® Urea cryst. are a colorless crystals or white crystalline powder. As part of the natural moisturizing factor (NMF) in our skin, urea is one of the most popular moisturizing ingredients used in cosmetics. To best serve your specific formulation n...view more
RonaCare® Urea cryst. are a colorless crystals or white crystalline powder. As part of the natural moisturizing factor (NMF) in our skin, urea is one of the most popular moisturizing ingredients used in cosmetics. To best serve your specific formulation needs, we provide highly pure cosmetic grade urea in two versions: RonaCare® Urea beads and RonaCare® Urea cryst. Two different crystal morphologies but one common set of benefits for a well-hydrated, plump and youthful-looking skin! view less
Compliance Highlights Available
|
Request Sample |
