| ActiveCFL® Azelaic Acid | Jiangsu High Hope International Group Sunshine Chemical Corporation |
|
ActiveCFL® Azelaic Acid is a naturally occurring chemical belonging to the class of dicarboxylic acids. In skin care, it is most commonly used to treat acne. However, azelaic acid also reduces melanin production by inhibiting (largely indirectly) the enzy...view more
ActiveCFL® Azelaic Acid is a naturally occurring chemical belonging to the class of dicarboxylic acids. In skin care, it is most commonly used to treat acne. However, azelaic acid also reduces melanin production by inhibiting (largely indirectly) the enzyme tyrosinase. It also suppresses the proliferation of abnormal melanin producing cells (melanocytes), apparently by reducing the rate of DNA synthesis.
Azelaic acid has been used to treat melasma, lentigo maligna and other hyperpigmentation problems. Topical azelaic acid has no or little depigmentation effect on normally pigmented skin, freckles, age spots (solar lentigines), and nevi. It is widely used in cosmetics and pharmaceuticals. view less
Compliance Highlights Available
|
|
| AntiagingCFL®EGF | Jiangsu High Hope International Group Sunshine Chemical Corporation |
|
AntiagingCFL®EGF contains recombinant human epidermal growth factor (EGF). EGF stimulates the proliferation and differentiation of epithelial cells from skin, the cornea, lung and tracheal tissue and the gastrointestinal tract. EGF also promotes the proli...view more
AntiagingCFL®EGF contains recombinant human epidermal growth factor (EGF). EGF stimulates the proliferation and differentiation of epithelial cells from skin, the cornea, lung and tracheal tissue and the gastrointestinal tract. EGF also promotes the proliferation of fibroblasts and embryonic cells. Thus, EGF plays an important role in wound healing and organogenesis. It also Facilitates the biosynthesis of protein, RNA, DNA as well as metabolic activity in epidermal cells.
To utilize EGF in a cosmetic cream, the EGF should be dissolved in distilled water. Wait until the temperature of the cosmetic cream has decreased to below 40 degrees Celsius, then put the dissolved solution into the cream, stir the cream to full blending. view less
Compliance Highlights Available
|
|
| AntidruffCFL® Keto Ketoconazole | Jiangsu High Hope International Group Sunshine Chemical Corporation |
|
AntidruffCFL®Keto is most often used to treat fungal infections that can spread to different parts of the body through the bloodstream such as yeast infections of the mouth, skin, urinary tract, and blood, and certain fungal infections that begin on the s...view more
AntidruffCFL®Keto is most often used to treat fungal infections that can spread to different parts of the body through the bloodstream such as yeast infections of the mouth, skin, urinary tract, and blood, and certain fungal infections that begin on the skin or in the lungs and can spread through the body.
This product is one kind of imidazole anti-fungi drugs and can cure disease caused by many kinds of fungus. It also can be used as scurf treatment agent. This product can be used in scurf treatment shampoo. At 0.5~2% usage it can dissolve in propylene glycol at first. view less
Compliance Highlights Available
|
|
| AntidruffCFL® PO Piroctone Olamine | Jiangsu High Hope International Group Sunshine Chemical Corporation |
|
AntidruffCFL® PO Piroctone Olamine is an anti-dandruff active ingredient that soothes inflamed scalps and reduces flaking. It has a specific action against Pityrosporum Ovale, the agent responsible for the production of dandruff. It helps destroy the fung...view more
AntidruffCFL® PO Piroctone Olamine is an anti-dandruff active ingredient that soothes inflamed scalps and reduces flaking. It has a specific action against Pityrosporum Ovale, the agent responsible for the production of dandruff. It helps destroy the fungus infection that is responsible for the dandruff and works against the formation of new dandruff. AntidruffCFL® PO makes the scalp stay clean, itch free and prevents the formation of new dandruff and you become free of all the inconvenience relating to dandruff.
It can be applied in shampoos (non-coloring); tonics, dressings and other hair grooming aids. Piroctone olamine finds favour in the eyes of manufacturer and technicians, not only because of its good anti-dandruff action, but also its solubility and safety and function as a thickening preservation and elimination of body offensive odour. view less
Compliance Highlights Available
|
|
| AntidruffCFL®ZPT | Jiangsu High Hope International Group Sunshine Chemical Corporation |
|
AntidruffCFL®ZPT is an effective antimicrobial to fungi and bacteria, which can effectively kill the fungi that cause the dandruff. It is used as antidandruff agent for a long time and widely used in various famous shampoo. Some applications for Antidruff...view more
AntidruffCFL®ZPT is an effective antimicrobial to fungi and bacteria, which can effectively kill the fungi that cause the dandruff. It is used as antidandruff agent for a long time and widely used in various famous shampoo. Some applications for AntidruffCFL®ZPT include cosmetics, shampoos, skin care, adhesives, coatings and painting. view less
Compliance Highlights Available
|
|
| Apricot Kernel Oil | Cosmetics Factory Solutions |
Apricot Kernel Oil is a vegetable oil which is deployed in a variety of very different external applications, including skin care products such as creams, lotions, lipsticks, and massage oils. It is also used in hair care products such as shampoos, condit...view more
Apricot Kernel Oil is a vegetable oil which is deployed in a variety of very different external applications, including skin care products such as creams, lotions, lipsticks, and massage oils. It is also used in hair care products such as shampoos, conditioners and hair tonics. view less
Compliance Highlights Unavailable
|
||
| BELSIL® ADM 1650 | Wacker Chemie AG 瓦克化学 |
BELSIL® ADM 1650 is a non-reactive aminofunctional polydimethylsiloxane with an average viscosity of 1000 mm2/s. The major field of application for this product is hair care. The non-reactive amino functional silicone fluid forms a protective sheath aroun...view more
BELSIL® ADM 1650 is a non-reactive aminofunctional polydimethylsiloxane with an average viscosity of 1000 mm2/s. The major field of application for this product is hair care. The non-reactive amino functional silicone fluid forms a protective sheath around the hair fiber that lasts through several shampooing cycles. BELSIL® ADM 1650 is used mainly in shampoos and hair conditioners. The conditioning properties are highly effective in these applications, resulting in improved wet and dry combability and a pleasant, soft feel. view less
Compliance Highlights Unavailable
|
||
| BELSIL® ADM 6057 E | Wacker Chemie AG 瓦克化学 |
|
BELSIL® ADM 6057 E is an O/W-macro-emulsion of an amodimethicone with low amine content, stabilized with a cationic/nonionic emulsifier system. The major field of application for this product is hair care. The reactive amino-functional silicone fluid will...view more
BELSIL® ADM 6057 E is an O/W-macro-emulsion of an amodimethicone with low amine content, stabilized with a cationic/nonionic emulsifier system. The major field of application for this product is hair care. The reactive amino-functional silicone fluid will crosslink upon drying to form a protective sheath around the hair fiber that lasts several shampooing cycles. BELSIL® ADM 6057 E is used in shampoos, cream rinses, and hair treatments. The conditioning properties are highly effective in these applications, resulting in improved wet and dry compatibility and a pleasant, soft feel. view less
Compliance Highlights Unavailable
|
|
| BELSIL® ADM 6300 E | Wacker Chemie AG 瓦克化学 |
BELSIL® ADM 6300 E is a nonionic macroemulsion of an aminofunctional polydimethylsiloxane. It is an excellent conditioning agent in hair care applications. This product provides a soft, silky touch and effectively reduces dry and wet combing forces. BELSI...view more
BELSIL® ADM 6300 E is a nonionic macroemulsion of an aminofunctional polydimethylsiloxane. It is an excellent conditioning agent in hair care applications. This product provides a soft, silky touch and effectively reduces dry and wet combing forces. BELSIL® ADM 6300 E is suitable for rinse-off conditioners, hair treatments and shampoos. The product is used to reduce color fade of colored hair in conditioner formulations. view less
Compliance Highlights Unavailable
|
||
| BELSIL® ADM 8105 E | Wacker Chemie AG 瓦克化学 |
|
BELSIL® ADM 8105 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. It is suitable for hair care, shampoo, and conditioner applications.
Compliance Highlights Unavailable
|
|
| BELSIL® ADM 8301 E | Wacker Chemie AG 瓦克化学 |
BELSIL® ADM 8301 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. This product is an excellent conditioning agent in hair care applications. It provides a soft, silky touch and strongly reduces dry and wet combing forces. BELSIL® ...view more
BELSIL® ADM 8301 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. This product is an excellent conditioning agent in hair care applications. It provides a soft, silky touch and strongly reduces dry and wet combing forces. BELSIL® ADM 8301 E reduces color fade of colored hair and protects hair during heat treatments. The product is especially suitable for rinse-off conditioners, hair treatments, masks, pump sprays, conditioning shampoos, or styling applications like mousses. In Shampoos, it allows the formulation of transparent products. view less
Compliance Highlights Unavailable
|
||
| BELSIL® CDM 3526 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® CDM 3526 VP is a cream colored, pasty silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone paste are in skin protection, skin care, sunscreens, and decorative ...view more
BELSIL® CDM 3526 VP is a cream colored, pasty silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone paste are in skin protection, skin care, sunscreens, and decorative cosmetics.
In skin care products, BELSIL® CDM 3526 VP improves the formulation efficiency and provides a soft, non-sticky skin feel. Its good spreading properties improve distribution of the preparation. It's high substantivity, improved water resistance and moisturizing properties make this alkyl-functional silicone paste an indispensable component of sunscreen products and decorative cosmetics, such as lipsticks, mascara and make-up. view less
Compliance Highlights Unavailable
|
|
| BELSIL® CM 1000 | Wacker Chemie AG 瓦克化学 |
|
Belsil® CM 1000 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. Due to its composition, it combines the properties of the low-viscosity, volatile cyclopentasiloxane and the extremely high-viscosity dimethiconol. This product is used in ...view more
Belsil® CM 1000 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. Due to its composition, it combines the properties of the low-viscosity, volatile cyclopentasiloxane and the extremely high-viscosity dimethiconol. This product is used in hair-care and in skin care applications.
Skin care and skin protection preparations containing BELSIL® CM 1000 impart a pleasant, supple feel to skin. It facilitates the distribution of the formulations and improves skin elasticity. It also forms a water-resistant but breathable protective barrier that provides good substantivity and fixation of active ingredients. view less
Compliance Highlights Unavailable
|
|
| BELSIL® CM 3092 | Wacker Chemie AG 瓦克化学 |
|
Belsil® CM 3092 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. It is used in hair-care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It facilit...view more
Belsil® CM 3092 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. It is used in hair-care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It facilitates the distribution of the formulations and improves skin elasticity. At the same time, it forms a water-resistant but breathable protective barrier. This provides good substantivity and fixation of active ingredients. Use of BELSIL® CM 3092 in hair-care products yields sleek, shiny hair. view less
Compliance Highlights Unavailable
|
|
| BELSIL® CM 7026 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® CM 7026 VP is a high melting, white to cream colored, silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone wax is in skin protection, skin care, sunscreens and...view more
BELSIL® CM 7026 VP is a high melting, white to cream colored, silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone wax is in skin protection, skin care, sunscreens and decorative cosmetics. In skin care products, it improves the formulation efficiency and provides a soft, non-sticky skin feel while forming an occlusive film, which reduces trans-epidermal water loss.
The high substantivity of BELSIL® CM 7026 VP improves water resistance and moisturizing properties making it an indispensable component of sunscreen products and decorative cosmetics, such as lipsticks, mascara, and make-up. view less
Compliance Highlights Available
|
|
| BELSIL® CM 740 | Wacker Chemie AG 瓦克化学 |
BELSIL® CM 740 is a blend of cylcopenta-siloxane and a high molecular silicone gum. It is used in hair care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It improv...view more
BELSIL® CM 740 is a blend of cylcopenta-siloxane and a high molecular silicone gum. It is used in hair care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It improves skin elasticity while forming a water-resistant, but breathable protective barrier. Use of BELSIL® CM 740 in hair-care products yields sleek, shiny hair. Damaged hair regains a natural, healthy appearance. Wet and dry combability are improved, and further damage to the hair cuticles is prevented. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 0.65 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 0.65 is a colorless, clear fluid of low viscosity and high volatility. It can be utilized as a delivery system in antiperspirant and deodorant formulations as well as hair-care products and color-cosmetic compositions. It provides sufficient p...view more
BELSIL® DM 0.65 is a colorless, clear fluid of low viscosity and high volatility. It can be utilized as a delivery system in antiperspirant and deodorant formulations as well as hair-care products and color-cosmetic compositions. It provides sufficient play time in color-cosmetics applications, thereby improving rub-in properties, reducing stickiness, and imparting lubricity and a smooth skin feel. In hair-care products, BELSIL® DM 0.65 supports easy spreading of high-viscosity fluids, improves wet compatibility, and functions as a resin plasticizer in fixative styling products. view less
Compliance Highlights Available
|
|
| BELSIL® DM 1 000 000 | Wacker Chemie AG 瓦克化学 |
BELSIL® DM 1 000 000 is a linear, non-reactive, unmodified polydimethylsiloxane. This product is characterized by low surface tension and high spreading coefficient. It is widely used in a diverse range of personal-care formulations. It provides a hydroph...view more
BELSIL® DM 1 000 000 is a linear, non-reactive, unmodified polydimethylsiloxane. This product is characterized by low surface tension and high spreading coefficient. It is widely used in a diverse range of personal-care formulations. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. Simultaneously, it prevents stickiness in skin-care as well as in color-cosmetics formulations. In hair-care products, it improves both wet and dry compatibility, enhances shine, and imparts humidity resistance and soft feel to the hair. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 1 PLUS | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 1 PLUS is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, lower alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of ...view more
BELSIL® DM 1 PLUS is a colorless, clear fluid of low viscosity and high volatility. It is non-polar and insoluble in water but miscible with mineral oils, lower alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, BELSIL® DM 1 PLUS evaporates from the skin without producing a cooling or stinging effect. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 10 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. It is widely used in a highly varied range of personal-care formulations. It is characterized by low surface tension and a high spreading coefficient. Formulations with this product...view more
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. It is widely used in a highly varied range of personal-care formulations. It is characterized by low surface tension and a high spreading coefficient. Formulations with this product have better spreading properties and can be easily distributed on the skin. In these formulations, BELSIL® DM 10 imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 100 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor,...view more
BELSIL® DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 100 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 1000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor...view more
BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 1000 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 12 500 | Wacker Chemie AG 瓦克化学 |
BELSIL® DM 12 500 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficients. It is used in a highly varied range of cosmetic applications. It provides a hydrophobic, protective, but b...view more
BELSIL® DM 12 500 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficients. It is used in a highly varied range of cosmetic applications. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. In hair-care products, BELSIL® DM 12 500 is among the most commonly used conditioning additive. It improves both wet and dry combability, enhances shine, and imparts a soft feel to the hair. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 20 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane that is characterized by low surface tension and a high spreading coefficient. It is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM ...view more
BELSIL® DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane that is characterized by low surface tension and a high spreading coefficient. It is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM 20 have better spreading properties and can be easily distributed on the skin. In these formulations, it imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 300000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 300000 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and high spreading coefficients. This product is widely used in a diverse range of personal care formulations. It provides a hydrophobic, pro...view more
BELSIL® DM 300000 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and high spreading coefficients. This product is widely used in a diverse range of personal care formulations. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. It improves the water resistance of various products, such as sun screens. In hair-care products, it improves both wet and dry combability, enhances shine, and imparts humidity resistance and a soft feel to the hair. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 3096 | Wacker Chemie AG 瓦克化学 |
BELSIL® DM 3096 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high viscosity dimethiconol. In skin care formulations, it provide...view more
BELSIL® DM 3096 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high viscosity dimethiconol. In skin care formulations, it provides a water-resistant, but breathable non-occlusive protection barrier which provides good substantivity and fixation of active ingredients. In hair-care products, it yields sleek, shiny hair, regains the natural, healthy look to damaged hair, wet and dry compatibility are improved, and further damage to the hair cuticles is prevented. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 3112 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 3112 VP is an anionic emulsion of a high-viscosity dimethiconol. The main field of application for this product is hair care. It is an excellent conditioning additive, especially in formulations for rinse-off or leave-in conditioners. It improv...view more
BELSIL® DM 3112 VP is an anionic emulsion of a high-viscosity dimethiconol. The main field of application for this product is hair care. It is an excellent conditioning additive, especially in formulations for rinse-off or leave-in conditioners. It improves dry and wet compatibility as well as the wet and dry feel of the hair. Due to its conditioning properties, BELSIL® DM 3112 VP can also be used in other formulations, such as shampoos and hair-styling products. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 350 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this product has high permeability to gases (e.g. water vapor, oxygen), ...view more
BELSIL® DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this product has high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 350 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 3560 VP | Wacker Chemie AG 瓦克化学 |
Belsil® DM 3560 VP is an anionic emulsion of a high-viscosity dimethiconol. The dimethiconol is synthesized in-situ in the emulsion system and is adjusted to a visosity of approx. 60.000 mm²/s. The main field of application for this product is hair care. ...view more
Belsil® DM 3560 VP is an anionic emulsion of a high-viscosity dimethiconol. The dimethiconol is synthesized in-situ in the emulsion system and is adjusted to a visosity of approx. 60.000 mm²/s. The main field of application for this product is hair care. BELSIL® DM 3560 VP is an excellent conditioning additive, especially when formulated into shampoo, rinse-off or leave-in conditioners. It improves wet and dry combability as well as the wet and dry feel of the hair. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 5 | Wacker Chemie AG 瓦克化学 |
|
Belsil® DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen),...view more
Belsil® DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 5 is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM 5 have better spreading properties and can be easily distributed on the skin. It imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 50 | Wacker Chemie AG 瓦克化学 |
BELSIL® DM 50 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen)...view more
BELSIL® DM 50 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. It is widely used in a highly varied range of personal care formulations.
Formulations with BELSIL® DM 50 have better spreading properties and can be easily distributed on the skin. It imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
||
| BELSIL® DM 500 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosme...view more
BELSIL® DM 500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. This product has a density at 25°C of approx. 0,97 g/cm^3, a surface tension at 25°C of 0,021 N/m, and a viscosity, dynamic at 25°C of 500 mPa.s. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 500000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 500000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 500 000 mm²/s. BELSIL® DM 500000 is characterized by low surface tension and high spreading coefficient. Due to its flexible polymer back...view more
BELSIL® DM 500000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 500 000 mm²/s. BELSIL® DM 500000 is characterized by low surface tension and high spreading coefficient. Due to its flexible polymer backbone, this dimethicone has high permeability to gases (e.g. water, vapour, oxygen), which allows respiration of the skin.
High-viscous BELSIL® DM 500 000 is widely used in a diverse range of personal-care formulations. Dimethicones provide a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency, giving hair a soft feel and enhanced shine. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DM 5102 E | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 5102 E is a non-ionic emulsion of a high-viscosity dimethicone. It is suitable for hair care, shampoo, and conditioner formulations.
Compliance Highlights Unavailable
|
|
| BELSIL® DM 5700 E | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 5700 E is a small droplet size emulsion of a high-viscosity dimethicone fluid with a sugar based emulsifier system from renewable materials.
Compliance Highlights Unavailable
|
|
| BELSIL® DM 60000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a Dimethicone with a viscosity of 60000 mm²/s. BELSIL® DM 60000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer ba...view more
BELSIL® DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a Dimethicone with a viscosity of 60000 mm²/s. BELSIL® DM 60000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.
Dimethicones improves the water resistance of various products, such as sun screens. Simultaneously, they prevent stickiness in skin-care as well as in color-cosmetics formulations. In hair-care products, high-viscous dimethicones are among the most commonly used conditioning additives. They improve both wet and dry combability, impart humidity resistance and a soft feel to the hair, and enhance shine. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DMC 6031 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DMC 6031 is a copolymer of polydimethylsiloxane and organic glycol. It is ideally used in hair-fixative compositions, acting as a resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone sur...view more
BELSIL® DMC 6031 is a copolymer of polydimethylsiloxane and organic glycol. It is ideally used in hair-fixative compositions, acting as a resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stabilize the foam, confers mild conditioning benefits on hair and skin, and promotes formation of clear products. BELSIL® DMC 6031 has a density at 25°C of 1,03 g/cm³, a cloud point (1% solution in water) of 41-43, and a refractive index at 25°C of 1,452. view less
Compliance Highlights Unavailable
|
|
| BELSIL® DMC 6038 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® DMC 6038 is a wax-like, water disperable dimethicone copolyol that exhibits good compatibility with polar ingredients. BELSIL® DMC 6038 is used in skincare and hair-care formulations, as well as in deodorants because of its good compatibility with...view more
BELSIL® DMC 6038 is a wax-like, water disperable dimethicone copolyol that exhibits good compatibility with polar ingredients. BELSIL® DMC 6038 is used in skincare and hair-care formulations, as well as in deodorants because of its good compatibility with other ingredients. Its low melting point improves the distribution of creams, lotions, deodorant sticks and roll-on deodorants. This product has a refractive index at 35°C of 1,458, a melting point of approx. 30°C, and a flash point of 241°C. view less
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 10 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 10 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 100 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 100 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 20 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 20 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 350 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 350 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 5 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun ca...view more
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun care. view less
Compliance Highlights Unavailable
|
|
| BELSIL® eco DM 60.000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun ca...view more
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care. view less
Compliance Highlights Unavailable
|
|
| BELSIL® EG 5 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® EG 5 elastomer gel is a silicone copolymer network blended with a cyclopentasiloxane. It appears as a transparent gel providing a very pleasant sensorial sensation during the application and after use. BELSIL® EG 5 can easily be diluted with low v...view more
BELSIL® EG 5 elastomer gel is a silicone copolymer network blended with a cyclopentasiloxane. It appears as a transparent gel providing a very pleasant sensorial sensation during the application and after use. BELSIL® EG 5 can easily be diluted with low viscous silicones, to adjust the viscosity as required. BELSIL® EG 5 can act as a thickener in formulations. In addition it exhibits shear thinning behavior, which allows formulating cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. view less
Compliance Highlights Unavailable
|
|
| BELSIL® GB 1020 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® GB 1020 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high-viscosity dimethiconol. The excellent spreading of the low-vi...view more
BELSIL® GB 1020 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high-viscosity dimethiconol. The excellent spreading of the low-viscosity dimethicones allows a good distribution of the high-viscosity conditioning agent dimethiconol.
BELSIL® GB 1020 is used in hair, skin, and sun care applications. It has a viscosity, dynamic at 25°C of approx. 1500 mPa.s, a refractive index at 25°C of 1,398, and a density at 25°C of 0,93 g/cm³. view less
Compliance Highlights Unavailable
|
|
| BELSIL® OW 1500 | Wacker Chemie AG 瓦克化学 |
BELSIL® OW 1500 is a copolymer of polydimethylsiloxane and organic glycol. In hair-fixative compositions, it acts as resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stab...view more
BELSIL® OW 1500 is a copolymer of polydimethylsiloxane and organic glycol. In hair-fixative compositions, it acts as resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stabilize the foam, confers mild conditioning benefits on hair and skin and promotes formation of clear products. In creams and lotions, it acts as co-emulsifiers providing oil-in-water emulsification benefits, improving skin feel and product stability. BELSIL® OW 1500 has a cloud point of 38,5-40,5%, an ignition temperature (liquids) of > 400°C, and a flash point of > 100°C. view less
Compliance Highlights Unavailable
|
||
| BELSIL® OW 2100 DE | Wacker Chemie AG 瓦克化学 |
|
BELSIL® OW 2100 DE is a copolymer of polydimethylsiloxane and organic glycol. BELSIL® OW 2100 DE has good compatibility with a wide range of cosmetic ingredients, such as water and alcohol. It is stable in water systems.
Compliance Highlights Unavailable
|
|
| BELSIL® P 1101 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® P 1101 is a is a silicone-organic hybrid material that is used as a hair styling and conditioning polymer, and is provided as a 50% solution in denatured ethanol. It combines the strong hold properties of a hair styling resin with typical silicone...view more
BELSIL® P 1101 is a is a silicone-organic hybrid material that is used as a hair styling and conditioning polymer, and is provided as a 50% solution in denatured ethanol. It combines the strong hold properties of a hair styling resin with typical silicone properties like softness and silkiness, to be used in aerosols, pump sprays and balm/gel-type formulations. This product comes in the form of an ethanol solution, has a solids content of approx. 50% and an acid number/saponification number of 8-33mg KOH/g. view less
Compliance Highlights Available
|
|
| BELSIL® PDM 1000 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® PDM 1000 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cos...view more
BELSIL® PDM 1000 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosmetic raw materials. This product has a flash point of approx. 285°C, a viscosity, kinematic at 25°C of approx. 1000 mm²/s, and a density at 25°C (at 1013 hPa) of approx. 1,07 g/cm³.
It is used in all kinds of cosmetics formulations, but mostly in hair care compositions and color cosmetic due to their shine-enhancing benefits. BELSIL® PDM 1000 reduces the stickiness of formulations containing acrylic acid polymers. It is an excellent emollient in skincare products, imparts a very pleasant feel to the skin, and provides water repellency. view less
Compliance Highlights Available
|
|
| BELSIL® PDM 20 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® PDM 20 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosme...view more
BELSIL® PDM 20 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosmetic raw materials. It is used in all kinds of cosmetics formulations, but mostly in hair care compositions and color cosmetic due to their shine-enhancing benefits. This product has a flash point of approx. 170°C, an ignition temperature (liquids) of approx. 450°C, and a refractive index at 25°C of 1,437. view less
Compliance Highlights Available
|
|
| BELSIL® PF 200 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® PF 200 is a multifunctional phenyl modified polydimethylsiloxane, the chemical structure of which has been carefully designed to provide multiple attractive benefits such as high refractive index, amphiphilicity, soft feel and easy emulsifiabilit...view more
BELSIL® PF 200 is a multifunctional phenyl modified polydimethylsiloxane, the chemical structure of which has been carefully designed to provide multiple attractive benefits such as high refractive index, amphiphilicity, soft feel and easy emulsifiability. view less
Compliance Highlights Unavailable
|
|
| BELSIL® PF 22 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® PF 22 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. It is typically used as a gloss agent in hair ...view more
BELSIL® PF 22 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. It is typically used as a gloss agent in hair and color cosmetics. view less
Compliance Highlights Unavailable
|
|
| BELSIL® PMS MK POWDER | Wacker Chemie AG 瓦克化学 |
|
BELSIL® PMS MK POWDER is a solid, solvent-free silicone resin. This highly cross-linked silicone resin is primarily used for its film-forming attributes, it provides improved water-resistance and is a processing aid in pigment grinding and pressed-powder ...view more
BELSIL® PMS MK POWDER is a solid, solvent-free silicone resin. This highly cross-linked silicone resin is primarily used for its film-forming attributes, it provides improved water-resistance and is a processing aid in pigment grinding and pressed-powder applications. It prevents agglomeration and maintains free-flowing characteristics in loose-powder products as well, which is beneficial in powder-filling devices. This product is a white, odorless powder, and has a softening point of 50-60°C. view less
Compliance Highlights Available
|
|
| BELSIL® REG 1102 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. B...view more
BELSIL® REG 1102 resin elastomer gel is a non-emulsifying silicone copolymer network blended with a non-volatile, low viscosity dimethicone. It is a transparent gel, which provides a very pleasant sensory property both during application and afterwards. BELSIL® REG 1102 can act as a thickener in formulations while delivering a smooth application. In addition it exhibits shear-thinning behavior. This attribute allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation. view less
Compliance Highlights Unavailable
|
|
| BELSIL® RG 100 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® RG 100 elastomer gel is an organosiloxane polymer dispersed in cyclopentasiloxane. It is a semitransparent gel that functions as a thickener in formulations while delivering smooth applications. Under shear stress BELSIL® RG 100 thins and allows e...view more
BELSIL® RG 100 elastomer gel is an organosiloxane polymer dispersed in cyclopentasiloxane. It is a semitransparent gel that functions as a thickener in formulations while delivering smooth applications. Under shear stress BELSIL® RG 100 thins and allows easy incorporation of cosmetic ingredients like pigments. It is suitable for skin care, sun care, and color cosmetic formulations. view less
Compliance Highlights Unavailable
|
|
| BELSIL® RG 90 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® RG 90 elastomer gel is a crosslinked high-molecular weight organosiloxane polymer dispersed in isododecane. It is delivered as a transparent to semitransparent gel. It is suitable for skin care, sun care, and color cosmetic formulations.
Compliance Highlights Unavailable
|
|
| BELSIL® SDM 5055 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® SDM 5055 VP is a silicone wax that displays good compatibility with many cosmetic raw materials including oils, waxes, fatty alcohols, and fatty acids. The main fields of application of this alkyl-functional silicone is skin protection, skin care ...view more
BELSIL® SDM 5055 VP is a silicone wax that displays good compatibility with many cosmetic raw materials including oils, waxes, fatty alcohols, and fatty acids. The main fields of application of this alkyl-functional silicone is skin protection, skin care and color cosmetics. In creams and lotions it improves the efficacy of the formulation and confers a non-sticky, soft skin feel. It can also be used in color cosmetics, lipstick, mascara, and make-up formulations. BELSIL® SDM 5055 VP has a melting point of approx. 30°C, a flash point of 160°C, a viscosity (dynamic at 50°C) of approx. 400 mPa.s, and a density at 50°C of approx. 0,86 g/cm³. view less
Compliance Highlights Available
|
|
| BELSIL® SPG 128 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® SPG 128 VP is supplied as a 20% active solution in cyclopentasiloxane,containing a nonionic surfactant with an HLB of approximately 6-7. This silicone polymer is synthesized using a renewable, sugar-based component. This product was designed speci...view more
BELSIL® SPG 128 VP is supplied as a 20% active solution in cyclopentasiloxane,containing a nonionic surfactant with an HLB of approximately 6-7. This silicone polymer is synthesized using a renewable, sugar-based component. This product was designed specifically as a water-in-oil or water-in-silicone emulsifier for compositions comprising volatile silicones or non-polar organic fluids as the continuous phase.
BELSIL® SPG 128 VP is an excellent emulsifier for water-in-oil an water-in-silicone systems in skincare, sun care an decorative cosmetics. This product has a refractive index at 25°C of 1,400, an HLB value of 6-7, and a density at 25°C of approx. 0,96 g/cm³. view less
Compliance Highlights Available
|
|
| BELSIL® SPR 45 VP | Wacker Chemie AG 瓦克化学 |
|
BELSIL® SPR 45 VP is a solvent-free phenyl silicone resin. This product is produced for use as a film former in cosmetic applications, specifically color cosmetics, skin care and sun care products. It has a refractive index (82°C, liquid) of 1,55, a refra...view more
BELSIL® SPR 45 VP is a solvent-free phenyl silicone resin. This product is produced for use as a film former in cosmetic applications, specifically color cosmetics, skin care and sun care products. It has a refractive index (82°C, liquid) of 1,55, a refractive index (25°C, film) of 1,57, and a softening point of 50-70°C. view less
Compliance Highlights Unavailable
|
|
| BELSIL® TMS 803 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® TMS 803 is the co-hydrolysis product of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). It can be compounded with polydimethylsiloxanes. This highly cross-linked silicone resin is primarily used for its film-forming attributes. In s...view more
BELSIL® TMS 803 is the co-hydrolysis product of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). It can be compounded with polydimethylsiloxanes. This highly cross-linked silicone resin is primarily used for its film-forming attributes. In sunscreen, skincare and color cosmetic applications, the Trimethylsiloxysilicate BELSIL® TMS 803 is an excellent water-resistant additive and helps to hold pigments in place. This product has a particle size of 10 µm, and a bulk density of 250 kg/m³. view less
Compliance Highlights Unavailable
|
|
| BELSIL® W 3230 | Wacker Chemie AG 瓦克化学 |
|
BELSIL® W 3230 is a mixture of a dimethicone with a stearoxy-modified polydimethylsiloxane. It is a white wax and affords good protection against aqueous media. In skin-care formulations, BELSIL® W 3230 forms a protective barrier, thereby providing moistu...view more
BELSIL® W 3230 is a mixture of a dimethicone with a stearoxy-modified polydimethylsiloxane. It is a white wax and affords good protection against aqueous media. In skin-care formulations, BELSIL® W 3230 forms a protective barrier, thereby providing moisturizing benefits. It imparts a non-greasy, soft, velvety feel to the skin and offers excellent compatibility with most cosmetic raw materials. In color-cosmetics formulations, it enhances gloss and brilliance. view less
Compliance Highlights Unavailable
|
|
| Calendula Oil | Cosmetics Factory Solutions |
Calendula Oil is a vegetable oil which is deployed in a variety of very different external applications, including skin care products such as creams, lotions, lipsticks, and massage oils. It is also used in hair care products such as shampoos, conditioner...view more
Calendula Oil is a vegetable oil which is deployed in a variety of very different external applications, including skin care products such as creams, lotions, lipsticks, and massage oils. It is also used in hair care products such as shampoos, conditioners and hair tonics. view less
Compliance Highlights Unavailable
|
||
| CAVAMAX® W6 PHARMA | Wacker Chemie AG 瓦克化学 |
CAVAMAX® W6 is pharmaceutical grade alpha-cyclodextrin, with 6 glucose units, it has the smallest cavity of the parent cyclodextrins. It is useful for solubilizing, stabilizing or delivering small molecules, making it ideally used in formulations for phar...view more
CAVAMAX® W6 is pharmaceutical grade alpha-cyclodextrin, with 6 glucose units, it has the smallest cavity of the parent cyclodextrins. It is useful for solubilizing, stabilizing or delivering small molecules, making it ideally used in formulations for pharmaceuticals, hair care, skin care and shaving formulations. This product has loss on drying of max. 11.0%, a specific rotation of 147.0-152.0°, and a gamma-cyclodextrin content of max. 0.25%. view less
Compliance Highlights Available
|
||
| CAVAMAX® W7 PHARMA | Wacker Chemie AG 瓦克化学 |
|
CAVAMAX® W7 PHARMA is pharmaceutical grade beta-cyclodextrin that has seven glucose units in the mid-size cavity of the parent cyclodextrins. It is useful for stabilizing, solubilizing or delivering intermediate size molecules, e.g. menthol; and is ideall...view more
CAVAMAX® W7 PHARMA is pharmaceutical grade beta-cyclodextrin that has seven glucose units in the mid-size cavity of the parent cyclodextrins. It is useful for stabilizing, solubilizing or delivering intermediate size molecules, e.g. menthol; and is ideally used in formulations for pharmaceuticals, hair care, skin care and shaving formulations. This product has a specific rotation of 160.9-164.0°, a water content of 14.0%, and a pH value of 5-8. view less
Compliance Highlights Available
|
|
| CAVAMAX® W8 PHARMA | Wacker Chemie AG 瓦克化学 |
CAVAMAX® W8 PHARMA has a specific rotation of 174.0-180.0°, a water content of max. 11.0%, and a content (on dry basis) of min. 98.0-102.0%. It is a pharmaceutical grade gamma-cyclodextrin, with 8 glucose units has the largest cavity of the parentcyclodex...view more
CAVAMAX® W8 PHARMA has a specific rotation of 174.0-180.0°, a water content of max. 11.0%, and a content (on dry basis) of min. 98.0-102.0%. It is a pharmaceutical grade gamma-cyclodextrin, with 8 glucose units has the largest cavity of the parentcyclodextrins and is the most water soluble. It is useful for solubilizing, stabilizing or delivering larger molecules; e.g. steroids, macrocyclics, oils, lipids, etc. This product is ideally used in hair care, shaving, sun care, sunscreens, and formulations for pharmaceuticals. view less
Compliance Highlights Available
|
||
| CAVASOL® W7 HP Pharma | Wacker Chemie AG 瓦克化学 |
CAVASOL® W7 HP Pharma is pharmaceutical gradehydroxypropyl-beta-cyclodextrin that is a highly soluble beta-cyclodextrin derivative when concentrated solutions are needed. This product is recommended for formulations for pharmaceuticals and skin care appli...view more
CAVASOL® W7 HP Pharma is pharmaceutical gradehydroxypropyl-beta-cyclodextrin that is a highly soluble beta-cyclodextrin derivative when concentrated solutions are needed. This product is recommended for formulations for pharmaceuticals and skin care applications, has a bulk density of 200 - 300 kg/m³, a melting point of 120-160°C, and a solubility in water at 25°C of 2300 g/l. view less
Compliance Highlights Available
|
||
| Clearthix® S | Alchemy Ingredients |
|
Clearthix® S is a synergistic blend of powders which act as a water thickening agent. It is ideal for use in creams and lotions, hair care, sun care, and baby products.
Compliance Highlights Available
|
|
| Cola®Carb TDC | Colonial Chemical, Inc. |
|
ColaCarb TDC is a mild anionic surfactant with good hard water tolerance. It thus improves the storage stability of amphoteric formulations, and can be used in combination with all ionic classes of surfactants. This product has applications in personal ca...view more
ColaCarb TDC is a mild anionic surfactant with good hard water tolerance. It thus improves the storage stability of amphoteric formulations, and can be used in combination with all ionic classes of surfactants. This product has applications in personal care and industrial formulations. view less
Compliance Highlights Available
|
|
| Cola®Det BSC-ND | Colonial Chemical, Inc. |
|
ColaDet BSC-ND is a DEA-free, anionic and amphoteric concentrated blend of mild sur- factants. With only dilution and minor additives, ColaDet BSC-ND can be economically formulated into marketable pet products that provide mildness while offering foam and...view more
ColaDet BSC-ND is a DEA-free, anionic and amphoteric concentrated blend of mild sur- factants. With only dilution and minor additives, ColaDet BSC-ND can be economically formulated into marketable pet products that provide mildness while offering foam and viscosity equal or greater than leading brand pet shampoos. It has low irritation properties making it ideal for mild cleansing products and can also be used in baby, children and adult products for sensitive skin. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-15 | Colonial Chemical, Inc. |
|
ColaDet DEF-15 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide...view more
ColaDet DEF-15 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide viscosity range. Elegant and complete products can be easily created that are DEA free with simple addition of perfume, color and other minor ingredients. ColaDet DEF-15 is designed to give the formulator an easy starting point for the creation of personal care products with luxuriant foam and good rinsing. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-20 | Colonial Chemical, Inc. |
|
ColaDet DEF-20 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide...view more
ColaDet DEF-20 is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide viscosity range. Elegant and complete products can be easily created that are DEA free with simple addition of perfume, color and other minor ingredients. ColaDet DEF-20 is designed for personal care formulations that are pH 5.5 to 7.0 and an easy starting point for the creation of many products. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-20P | Colonial Chemical, Inc. |
|
ColaDet DEF-20P is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wid...view more
ColaDet DEF-20P is an anionic/nonionic/amphoteric blend sodium salt. Colonial Chemical’s ColaDet DEF surfactant concentrates are produced completely DEA/MEA free which generate high viscosity at low solids and produce products that can be built over a wide viscosity range. Elegant and complete products can be easily created that are DEA free with simple addition of perfume, color and other minor ingredients. ColaDet DEF-20P is a pearlized version of ColaDet DEF-20 designed for personal care formulations that are pH 5.0 to 6.5 and an easy starting point for the creation of many products. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-26 | Colonial Chemical, Inc. |
|
ColaDet DEF-26 is a betaine-free anionic/nonionic/amphoteric surfactant blend. This DEA and MEA-free synergistic blend of surfactants is a high active surfactant base specially developed for use in the preparation of hair shampoos and skin cleanser system...view more
ColaDet DEF-26 is a betaine-free anionic/nonionic/amphoteric surfactant blend. This DEA and MEA-free synergistic blend of surfactants is a high active surfactant base specially developed for use in the preparation of hair shampoos and skin cleanser systems. ColaDet DEF-26 is an easy-to-use blend that readily yields high-foaming, completely formulated products with simple water dilution. Viscosity of the final formulation can then easily be adjusted with precise electrolyte additions. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-35 | Colonial Chemical, Inc. |
|
ColaDet DEF-35 is a high-active liquid pearling agent designed for easy dispersibility at ambient temperatures. ColaDet DEF-35 is used in pearlescent cosmetic surfactant preparations, particularly for DEA free formulations, and forms an elegant pearl in a...view more
ColaDet DEF-35 is a high-active liquid pearling agent designed for easy dispersibility at ambient temperatures. ColaDet DEF-35 is used in pearlescent cosmetic surfactant preparations, particularly for DEA free formulations, and forms an elegant pearl in all liquid personal care formulations. It is added slowly to the batch with moderate agitation to obtain attractive pearlescence and stability. The amount of use will vary from 3% to 12% based on the pearl effect desired. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-60 | Colonial Chemical, Inc. |
|
ColaDet DEF-60 is a surfactant blend with 40% solids designed for liquid mild cleansing formulations such as shampoos, liquid hand soaps, facial and body washes, and feminine products. ColaDet DEF-60 contains no sulfates, Diethanolamine (DEA), Ethylene Ox...view more
ColaDet DEF-60 is a surfactant blend with 40% solids designed for liquid mild cleansing formulations such as shampoos, liquid hand soaps, facial and body washes, and feminine products. ColaDet DEF-60 contains no sulfates, Diethanolamine (DEA), Ethylene Oxide (EO)/1,4-Dioxane and is shipped preservative-free. ColaDet DEF-60 builds high, creamy foam volume with effective viscosity response to salt. The concentrate offers cold mixability and ease of handling for transport, storage and mixing considerations. view less
Compliance Highlights Available
|
|
| Cola®Det DEF-61 | Colonial Chemical, Inc. |
|
ColaDet DEF-61 is a betaine-free surfactant blend with 40% solids designed for liquid mild cleansing formulations such as shampoos, liquid hand soaps, facial and body washes, and feminine products. It contains no betaines, sulfates, Diethanolamine (DEA), ...view more
ColaDet DEF-61 is a betaine-free surfactant blend with 40% solids designed for liquid mild cleansing formulations such as shampoos, liquid hand soaps, facial and body washes, and feminine products. It contains no betaines, sulfates, Diethanolamine (DEA), Ethylene Oxide (EO)/1,4-Dioxane and is shipped preservative-free. This product builds thick, creamy foam volume with effective viscosity response to salt. The concentrate is cold mixable and offers ease of handling for transport, storage and mixing considerations. view less
Compliance Highlights Available
|
|
| Cola®Det EQ-12 | Colonial Chemical, Inc. |
|
ColaDet EQ-12 is a blend of mild ingredients for the formulation of tear-free baby and children’s shampoos. This product can also be utilized for mild liquid soaps in foam pumps or for facial washes and bubble baths. Tear-free claims need to be establishe...view more
ColaDet EQ-12 is a blend of mild ingredients for the formulation of tear-free baby and children’s shampoos. This product can also be utilized for mild liquid soaps in foam pumps or for facial washes and bubble baths. Tear-free claims need to be established after viscosity adjustment and the addition of dyes, fragrances and other additives. view less
Compliance Highlights Available
|
|
| Cola®Det EQ-154 | Colonial Chemical, Inc. |
|
ColaDet EQ-154 is a high foam, spray-dried surfactant blend. It is very mild to both skin and eyes and quickly dispersible in hot or cold water. This product is recommended for powdered products where mildness is important, such as bubble baths and syndet...view more
ColaDet EQ-154 is a high foam, spray-dried surfactant blend. It is very mild to both skin and eyes and quickly dispersible in hot or cold water. This product is recommended for powdered products where mildness is important, such as bubble baths and syndet bars. ColaDet EQ-154 has excellent foam performance. view less
Compliance Highlights Available
|
|
| Cola®Det EQ-18 | Colonial Chemical, Inc. |
|
ColaDet EQ-18 is a sulfate-free, gentle, concentrated blend of surfactants for use as a base for high-foam personal care products. The eco-friendly blend is free of alcohol, diethanolamides, lauryl sulfates, laureth sulfates, parabens and formaldehyde. Th...view more
ColaDet EQ-18 is a sulfate-free, gentle, concentrated blend of surfactants for use as a base for high-foam personal care products. The eco-friendly blend is free of alcohol, diethanolamides, lauryl sulfates, laureth sulfates, parabens and formaldehyde. The surfactant ingredients in this blend originate from natural, renewable resources. view less
Compliance Highlights Available
|
|
| Cola®Det EQ-19 | Colonial Chemical, Inc. |
|
ColaDet EQ-19 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxy acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formula...view more
ColaDet EQ-19 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxy acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formulated for facial cleansers, body washes and other foaming washes. view less
Compliance Highlights Available
|
|
| Cola®Det EQ-20 | Colonial Chemical, Inc. |
|
ColaDet EQ-20 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxy acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formula...view more
ColaDet EQ-20 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxy acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formulated for facial cleansers, body washes and other foaming washes. A gentle, high-quality, and luxurious cleanser may be formulated as easily as preparing a dilution consisting of ColaDet EQ-20, an alpha hydroxyl acid, water and a fragrance. view less
Compliance Highlights Available
|
|
| Cola®Det KC-40 | Colonial Chemical, Inc. |
|
ColaDet KC-40 is a pure potassium coconut soap that exhibits excellent flash foam, good color and low odor. It is biodegradable, made from natural and renewable resources, and preservative free making it ideal for natural formulations. This product is rec...view more
ColaDet KC-40 is a pure potassium coconut soap that exhibits excellent flash foam, good color and low odor. It is biodegradable, made from natural and renewable resources, and preservative free making it ideal for natural formulations. This product is recommended for high-lathering soaps, cost-effective cleansers, natural formulations, and preservative-free formulations. view less
Compliance Highlights Available
|
|
| Cola®Fax CPE | Colonial Chemical, Inc. |
|
ColaFax CPE is an oil soluble long chain organic phosphate ester supplied as a free acid in flake form. It is usually used as a co-emulsifier with low HLB nonionics, and is non-irritating to skin. It can replace TEA-stearate in most preparations.
Compliance Highlights Available
|
|
| Cola®Fax CPE MB | Colonial Chemical, Inc. |
|
Cola®Fax CPE MB is an oil-soluble long-chain organic phosphate ester supplied as a free acid in powdered form. It is generally used as a co-emulsifier with low HLB nonionics and is non-irritating to the skin. Cola®Fax CPE MB is easily dissolved into eithe...view more
Cola®Fax CPE MB is an oil-soluble long-chain organic phosphate ester supplied as a free acid in powdered form. It is generally used as a co-emulsifier with low HLB nonionics and is non-irritating to the skin. Cola®Fax CPE MB is easily dissolved into either phase during emulsion processing and can be neutralized in situ with various cations. Cola®Fax CPE MB, at low use concentrations, will enhance the stability of emulsions and thicken cremes and lotions. It can replace TEA-stearate in most preparations. Cola®Fax CPE MB is ideally suited for use in many dermatological and personal care products. Cola®Fax CPE MB is derived from sustainably sourced palm oil that is certified Mass Balance from the Roundtable on Sustainable Palm Oil (RSPO). view less
Compliance Highlights Available
|
|
| Cola®Fax CPE-K MB | Colonial Chemical, Inc. |
|
Cola®Fax CPE-K MB is a naturally-derived, excellent water-soluble O/W emulsifier and emulsion stabilizer. It can be used as the primary emulsifier, combined with low HLB co-emulsifiers to achieve highly stable emulsions. Cola®Fax CPE-K MB is easily dissol...view more
Cola®Fax CPE-K MB is a naturally-derived, excellent water-soluble O/W emulsifier and emulsion stabilizer. It can be used as the primary emulsifier, combined with low HLB co-emulsifiers to achieve highly stable emulsions. Cola®Fax CPE-K MB is easily dissolved into the hot water phase during emulsion processing. Cola®Fax CPE-K MB, at low-use concentrates, will enhance the stability of any emulsion and at higher concentrations will aid in building the viscosity of creams and lotions. It can replace Stearic acid salts in most preparations. Cola®Fax CPE-K MB is ideally suited for use in many dermatological and personal care products providing a silky powdery after-feel. Cola®Fax CPE-K MB is completely non-irritating to the skin. Cola®Fax CPE-K MB is derived from sustainably sourced palm oil that is certified Mass Balance from the Roundtable on Sustainable Palm Oil (RSPO). view less
Compliance Highlights Available
|
|
| Cola®Lac 426 | Colonial Chemical, Inc. |
|
ColaLac 426 is an amido amine lactate used in the formulation of conditioners in hair and skin care products. Unlike quaternary ammonium cationics, ColaLac 426 rinses quickly and prevents tangling without reducing foam. ColaLac 426 is also compatible with...view more
ColaLac 426 is an amido amine lactate used in the formulation of conditioners in hair and skin care products. Unlike quaternary ammonium cationics, ColaLac 426 rinses quickly and prevents tangling without reducing foam. ColaLac 426 is also compatible with anionic surfactants and may be used in formulations for clear shampoo and skin cleansers. view less
Compliance Highlights Available
|
|
| Cola®Lac SLB | Colonial Chemical, Inc. |
|
Cola®Lac SLB is a plant-based, low-irritation conditioning concentrate that offers a high-quality conditioner in an easy, single-step manufacturing process. Cola®Lac SLB is shipped in a flake form and ready to use, requiring only dispersing in hot water w...view more
Cola®Lac SLB is a plant-based, low-irritation conditioning concentrate that offers a high-quality conditioner in an easy, single-step manufacturing process. Cola®Lac SLB is shipped in a flake form and ready to use, requiring only dispersing in hot water with any preservatives, fragrances, and dyes of the formulator’s choice. Cola®Lac SLB provides conditioning, improved wet combability, and may be blended with other additives to develop customized products for specific audiences, ranging from mass-market to salon-type conditioners. view less
Compliance Highlights Available
|
|
| Cola®Lipid C | Colonial Chemical, Inc. |
|
ColaLipid C, chemically described as Cocamidopropyl Phosphatidyl PG-Dimonium Chloride, is a coconut oil derived phospholipid composed predominantly of diester and triester phosphatides with multiple chain groups. In addition to topically simulating the pr...view more
ColaLipid C, chemically described as Cocamidopropyl Phosphatidyl PG-Dimonium Chloride, is a coconut oil derived phospholipid composed predominantly of diester and triester phosphatides with multiple chain groups. In addition to topically simulating the properties displayed by the polar stratum corneum lipids, ColaLipid C displays a broad range of functional attributes including gentle cleansing and foaming properties, anti-irritation effects when combined with anionic surfactants, unusually high substantivity, long-lasting skin conditioning, and broad spectrum antimicrobial activity. view less
Compliance Highlights Available
|
|
| Cola®Lipid DCCA | Colonial Chemical, Inc. |
|
ColaLipid DCCA is a coconut-derived multifuctional phospholipid, combining gentle cleaning, mildness and excellent substantivity with broad spectrum antimicrobial activity. It can be utilized to minimize preservative requirements or to formulate self-pres...view more
ColaLipid DCCA is a coconut-derived multifuctional phospholipid, combining gentle cleaning, mildness and excellent substantivity with broad spectrum antimicrobial activity. It can be utilized to minimize preservative requirements or to formulate self-preserved systems. ColaLipid DCCA is compatible with all surfactant types and is ideal for use in personal care cleansers where mildness and antimicrobial properties are of importance. view less
Compliance Highlights Available
|
|
| Cola®Lipid GS | Colonial Chemical, Inc. |
|
ColaLipid GS is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation ...view more
ColaLipid GS is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation of anionic activity, and repairs damaged skin and hair. view less
Compliance Highlights Available
|
|
| Cola®Lipid SAFL | Colonial Chemical, Inc. |
|
ColaLipid SAFL is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritatio...view more
ColaLipid SAFL is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation of anionic activity, and repairs damaged skin and hair. view less
Compliance Highlights Available
|
|
| Cola®Lipid SIL | Colonial Chemical, Inc. |
|
ColaLipid SIL is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation...view more
ColaLipid SIL is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation of anionic activity, and repairs damaged skin and hair. view less
Compliance Highlights Available
|
|
| Cola®Lipid SOTA | Colonial Chemical, Inc. |
|
Cola®Lipid SOTA offers multifunctional properties including high substantivity, gentle cleansing, low irritation, and long-lasting conditioning. Cola®Lipid SOTA is derived from sustainable pure safflower oil and designed to mimic natural phospholipids tha...view more
Cola®Lipid SOTA offers multifunctional properties including high substantivity, gentle cleansing, low irritation, and long-lasting conditioning. Cola®Lipid SOTA is derived from sustainable pure safflower oil and designed to mimic natural phospholipids that occur naturally in the body and deposits essential fatty acids on the skin. It has excellent compatibility with many surfactants, including anionics, and can be formulated into many personal care products. view less
Compliance Highlights Available
|
|
| Cola®Lipid ST | Colonial Chemical, Inc. |
|
ColaLipid ST is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation ...view more
ColaLipid ST is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation of anionic activity, and repairs damaged skin and hair. view less
Compliance Highlights Available
|
|
| Cola®Liquid BCMA | Colonial Chemical, Inc. |
|
ColaLiquid BCMA is an easy-to-use, liquid, cold-mix Cocamide MEA blend that is sulfate-free and PEG-free. No heating is required for your formulation – simply use it as you would any liquid ingredient at room temperature into clear products. ColaLiquid BC...view more
ColaLiquid BCMA is an easy-to-use, liquid, cold-mix Cocamide MEA blend that is sulfate-free and PEG-free. No heating is required for your formulation – simply use it as you would any liquid ingredient at room temperature into clear products. ColaLiquid BCMA boosts and stabilizes foam in a wide variety of personal care products and quickly builds viscosity with sodium chloride. view less
Compliance Highlights Available
|
|
| Cola®Liquid BL | Colonial Chemical, Inc. |
|
ColaLiquid BL is an easy-to-use liquid cold-mix version of Lauramide MIPA. That means there’s no heating required for the Lauramide MIPA in formulation – it can be used just like any liquid ingredient at room temperature into clear products. This product ...view more
ColaLiquid BL is an easy-to-use liquid cold-mix version of Lauramide MIPA. That means there’s no heating required for the Lauramide MIPA in formulation – it can be used just like any liquid ingredient at room temperature into clear products. This product can also be used to solubilize fragrances into formulations. view less
Compliance Highlights Available
|
|
| Cola®Liquid DC | Colonial Chemical, Inc. |
|
ColaLiquid DC is a liquid, non-ionic surfactant that is used to improve foam, viscosity and feel properties of personal care formulations. It is recommended for shampoos, bubble baths, hand soaps, body washes, and hand gels.
Compliance Highlights Available
|
|
| Cola®Liquid DC-5 | Colonial Chemical, Inc. |
|
ColaLiquid DC-5 is a DEA-free liquid nonionic surfactant derived from triglyceride oil. ColaLiquid DC-5 provides excellent viscosity building, foam enhancing, and foam stabilization properties. The product is liquid and very mild to eyes and skin. ColaLiq...view more
ColaLiquid DC-5 is a DEA-free liquid nonionic surfactant derived from triglyceride oil. ColaLiquid DC-5 provides excellent viscosity building, foam enhancing, and foam stabilization properties. The product is liquid and very mild to eyes and skin. ColaLiquid DC-5 can be used in any application where traditional alkanolamide surfactants have been used. ColaLiquid DC-5 will also enhance skin feel and maintain foam levels over non-amide systems and other personal care formulations. view less
Compliance Highlights Available
|
|
| Cola®Liquid DL | Colonial Chemical, Inc. |
|
ColaLiquid DL is a liquid, non-ionic surfactant that is used to improve foam, viscosity and feel properties of personal care formulations. It is recommended for shampoos, bubble baths, hand soaps, body washes, and hand gels.
Compliance Highlights Available
|
