| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...view more Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. view less | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations...view more CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. view less | |
| EPOSIR® WD 705 | SIR Industriale SpA | EPOSIR® WD 705 is a high molecular weight formulated epoxy-phenolic pre-condensate. It has a solid content of 39-41%. This product is well suited for use in oven cured paints for industrial anti-corrosion and heavy-duty protection. | |
| EPOSIR® LBC 8199 40 BC SA | SIR Industriale SpA | EPOSIR® LBC 8199 40 BC SA is a special BPA based resin solution in xylene. It has good adhesion and flexibility. This product is well suited for formulation of anti-corrosive paints for coatings for cans and coil applications. | |
| EPOSIR® 7161 75 XL | SIR Industriale SpA | EPOSIR® 7161 75 XL is an epoxy resin solution in xylene. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corr...view more EPOSIR® 7161 75 XL is an epoxy resin solution in xylene. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corrosion paints. view less | |
| EPOSIR® 7161 75 MP | SIR Industriale SpA | EPOSIR® 7161 75 MP is an epoxy resin solution in methoxypropanol. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and ...view more EPOSIR® 7161 75 MP is an epoxy resin solution in methoxypropanol. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corrosion paints. view less | |
| EPOSIR® 7170 50 BC SA | SIR Industriale SpA | EPOSIR® 7170 50 BC SA is an epoxy resin solution in butyl glycol/naphtha solvent. It is designed for formulation of anti-corrosion coatings for metallic surfaces and industrial applications. This product is well suited for blending with EPOSIR® 7161 for i...view more EPOSIR® 7170 50 BC SA is an epoxy resin solution in butyl glycol/naphtha solvent. It is designed for formulation of anti-corrosion coatings for metallic surfaces and industrial applications. This product is well suited for blending with EPOSIR® 7161 for improved flexibility. view less | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| EPOSIR® F 728 | SIR Industriale SpA | EPOSIR® F 728 is a low viscosity, water-dispersible, BPA/BPF based epoxy resin modified with a mono-functional reactive diluent. When combined with aminic hardeners, this product is suited for formulation of two-components epoxy paint and enamels for conc...view more EPOSIR® F 728 is a low viscosity, water-dispersible, BPA/BPF based epoxy resin modified with a mono-functional reactive diluent. When combined with aminic hardeners, this product is suited for formulation of two-components epoxy paint and enamels for concrete and anti-corrosion. view less | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...view more Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. view less | |
| LUNA-FLEX MP25-H | DKSH | LUNA-FLEX MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP25-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| LUNA-FLEX MP35-H | DKSH | LUNA-FLEX MP35-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP35-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP35-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| LUNA-FLEX MP60-H | DKSH | LUNA-FLEX MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP60-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...view more Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. view less | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...view more AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). view less | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...view more AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). view less | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...view more AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. view less | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. |
