| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...view more Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. view less | |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...view more GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. view less | Request Sample |
| BRC-843S | Bomar, formerly Dymax Oligomers & Coatings | BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the subst...view more BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. view less | |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...view more Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. view less | |
| LUNA-FLEX MP25-H | DKSH | LUNA-FLEX MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP25-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| LUNA-FLEX MP35-H | DKSH | LUNA-FLEX MP35-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP35-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP35-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| LUNA-FLEX MP60-H | DKSH | LUNA-FLEX MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...view more LUNA-FLEX MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. LUNA-FLEX MP60-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings, and marine and container paints. view less | Request Sample |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| Polychloroprene Adhesive (Formulation #RRS 2202) | Hoffmann Mineral | This polychloroprene adhesive SILLITIN Z 86 PURISS or AKTISIL PF 777. | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...view more DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...view more DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...view more DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| Polytone AP 111 | Polyols and Polymers | Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces an...view more Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces and is formulated to be used in neoprene. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 111 is primarily used with adhesive grades of chloroprene that provides bond strength at room or higher temperatures. It is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. view less | |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| 2K-PU Flooring (Formulation #V 44409.0) | Hoffmann Mineral | This 2K-PU Flooring is flexible, self-leveling, and solvent-free. It features SILLITIN Z 86. | |
| Dual-Cure 3401 | Bomar, formerly Dymax Oligomers & Coatings | Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary a...view more Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary ambient moisture-cure system for curing in shadow areas. Dual-Cure 3401 is also moisture and thermal resistant, has low shrinkage, and fluoresces blue under low-intensity “black light” (365 nm) for easy in-line inspection. Dual-Cure 3401 has applications that include plastic assembly, appliance assembly, and bonding, sealing, or encapsulating PC and ABS components. view less | |
| Polytone AP 114 | Polyols and Polymers | Polytone AP 114 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...view more Polytone AP 114 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 114 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. view less | |
| Polytone AP 116 | Polyols and Polymers | Polytone AP 116 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...view more Polytone AP 116 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 116 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. view less | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | SILLITIN N 85 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Epoxy Hot Melt Adhesive (Formulation #RRS 2110) | Hoffmann Mineral | This epoxy hot melt adhesive features SILLITIN V 85. | |
| 2K Epoxy Industrial Flooring (Formulation #RRS 2172) | Hoffmann Mineral | This self-leveling, water-borne industrial flooring features SILLITIN Z 89. | |
| Provichem 2203 | Proviron | Provichem 2203 is a very effective stabiliser for vinyl acetate and acrylic dispersions, where it is introduced during the emulsion polymerisation. It behaves like an anionic monomer and becomes an integral part of the polymer particles. The incorporated ...view more Provichem 2203 is a very effective stabiliser for vinyl acetate and acrylic dispersions, where it is introduced during the emulsion polymerisation. It behaves like an anionic monomer and becomes an integral part of the polymer particles. The incorporated sulfonate groups stabilise the polymer dispersion by an electrostatic mechanism. Unlike surfactant-type stabilisers, Provichem 2203 will not desorb from the polymer particles. It retains its stabilizing effect even under more severe conditions, such as high shear and freezing conditions. Provichem 2203 provides superior mechanical stability during formulation (especially high solid latex), storage (for example in winter time), transport and final use of the water-based coatings and adhesives. view less | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...view more BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. view less | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| 2K-Epoxy Industrial Flooring (Formulation #V 44422.2 [13]) | Hoffmann Mineral | This epoxy industrial flooring is self-leveling, with good pigment stability. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/1) | Hoffmann Mineral | This tough floor coating is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/2) | Hoffmann Mineral | This flooring flex coat is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | SILLIKOLLOID P 87 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...view more BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. view less | |
| Retroreflective Microspheres | Cospheric LLC | Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a p...view more Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a partial aluminum coating. Aluminum (Al) coatings on microspheres offer advantages in developing retroreflective surfaces for high visibility materials and applications. The hemispherical (half-shell) aluminum coating creates the mechanism for retroreflectivity as the light passes through the clear half of the glass bead and “bounces” off the reflective aluminum-coated back surface, directing the light back to the source or the viewer. Additional surface coatings (silane or fluorochemical) ensure that the spheres remain on the surface of the formulation, thereby enhancing the effect of retroreflectivity. view less | |
| Mounting Adhesive, Polyester-acrylic Based (Formulation #RRS 2203) | Hoffmann Mineral | This mounting adhesive features AKTISIL VM 56. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2C) | Hoffmann Mineral | This adhesive is based on silane-terminated polyether and provides maximum strength. It features SILLITIN V 85, SILFIT Z 91 or AKTIFIT VM. | |
| 1K STP-U Adhesive, High Strength (Formulation #V44426.1) | Hoffmann Mineral | This high strength adhesive features SILFIT Z 91, AKTIFIT PF 115, or AKTIFIT PF 111. | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...view more ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. view less | |
| Polytone AP 117 | Polyols and Polymers | Polytone AP 117 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...view more Polytone AP 117 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. This product is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. Polytone AP 117 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. view less | |
| Epokukdo KR-170 | Kukdo Chemical Co., Ltd. | Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used...view more Epokukdo KR-170 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-170 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-170 is especially used in formulating for the floor coating, molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. This product having medium-high viscosity is suitable for using in non-solvent adhesive, resin mortar, construction applications and flexible coating. KR-170 is particularly suitable for being applied on non-polar substrate surfaces such as PE or PP, greasy surface or oily surface of metals and so forth. view less | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...view more BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...view more BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. view less | |
| 2K-PU Joint Sealant with Polybutadiene Polyol (Formulation #V 44416.0) | Hoffmann Mineral | This joint sealant features SILLITIN Z 86. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Polytone AP 112 | Polyols and Polymers | Polytone AP 112 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has pale yellow color, delivered as small solid pieces and is for...view more Polytone AP 112 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has pale yellow color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 112 is primarily used with adhesive grades of chloroprene that provide bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. Polytone AP 112 is also used in tung and long based oils and is an alkyl insulator in varnishes, auto primers and wire enamels. view less | |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...view more BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. view less | |
| 1K STP-U Adhesive (Formulation #BBB 7006 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| 1K STP-U Adhesive (Formulation #BBB 7372 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2A) | Hoffmann Mineral | This adhesive based on silane-terminated polyether features SILLITIN V 85, SILFIT Z 91, or AKTIFIT VM. | |
| Elastic Adhesive Based on MS Polymer™ (Formulation #V 44423.1B) | Hoffmann Mineral | This elastic adhesive features SILLITIN Z 86. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...view more AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). view less | |
| Polytone AP 115 | Polyols and Polymers | Polytone AP 115 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has dark violet color, delivered as small solid pieces and is for...view more Polytone AP 115 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. This product is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. Polytone AP 115 is primarily used with adhesive grades of chloroprene that provide bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. Polytone AP 115 is also used in tung and long based oils and is an alkyl insulator in varnishes, auto primers and wire enamels. view less | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...view more AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. view less | |
| Non-Sagging Parquet Adhesive Based on MS Polymer™ (Formulation #V 44424.2) | Hoffmann Mineral | This parquet adhesive is non-sagging and features SILLITIN Z 86 or SILLITIN V 85. | |
| Klebstoff auf Basis MS Polymer™, hohe Festigkeit (Formulation #V 44428.1) | Hoffmann Mineral | This high strength adhesive features AKTIFIT VM, AKTIFIT AM and AKTIFIT PF 115. | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...view more Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. view less | |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...view more AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...view more Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. view less | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications whe...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications where higher tensile strength is required. view less | |
| GLOXIL WW SL | Hoffmann Mineral | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| RHEOLATE® HX 6050 | Elementis | RHEOLATE® HX 6050 is an extremely efficient nonionic synthetic associative thickener (NISAT) and specially designed as a high-shear (ICI) builder for low and zero VOC aqueous paint and coatings. This rheology modifier is especially efficient in VAE, VINA ...view more RHEOLATE® HX 6050 is an extremely efficient nonionic synthetic associative thickener (NISAT) and specially designed as a high-shear (ICI) builder for low and zero VOC aqueous paint and coatings. This rheology modifier is especially efficient in VAE, VINA VEOVA, and PVA latexes, and styrene acrylic. RHEOLATE® HX 6050 rheological additive contains very low VOC and can be used in emulsion paints and other waterborne systems including inks, textile coatings, adhesives and sealants. view less | |
| RHEOLATE® HX 6008 | Elementis | RHEOLATE® HX 6008 rheological additive is an extremely efficient non-ionic synthetic associative thickener (NiSAT) for high shear-rate viscosity build in waterborne systems. RHEOLATE® HX 6008 rheology modifier is suitable for a wide range of low VOC aque...view more RHEOLATE® HX 6008 rheological additive is an extremely efficient non-ionic synthetic associative thickener (NiSAT) for high shear-rate viscosity build in waterborne systems. RHEOLATE® HX 6008 rheology modifier is suitable for a wide range of low VOC aqueous paint systems and is particularly efficient in combination with pure acrylic and styrene-acrylic binders. view less | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...view more Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. view less | |
| Viscoatex™ 560 | Arkema Rheology & Specialty Additives | Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type,...view more Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type, surfactant and co-solvent. view less | Request Sample |
