| Secoia EXP 6801-2 | Ecoat Sas | Secoia EXP 6801-2 is a polyester solution, modified with LeafTech cross-linking technology, with remaining hydroxyl and carboxylic functionalities. It features an amber appearance, low molecular weight, and at least 95% vegetable-based material content. T...view more Secoia EXP 6801-2 is a polyester solution, modified with LeafTech cross-linking technology, with remaining hydroxyl and carboxylic functionalities. It features an amber appearance, low molecular weight, and at least 95% vegetable-based material content. This product is designed for use as a co-binder in low-VOC matte paint, primer, and reduced-PVC paint applications. view less | |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...view more WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. view less | |
| Impranil® DL 519 | Covestro | Impranil® DL 519 is an anionic aliphatic polyester-polyurethane dispersion, and is suitable for the formulation of textile coatings. This product is a co-solution-free finish product, has a high lightfastness, high scratch resistance, and a dry surface wi...view more Impranil® DL 519 is an anionic aliphatic polyester-polyurethane dispersion, and is suitable for the formulation of textile coatings. This product is a co-solution-free finish product, has a high lightfastness, high scratch resistance, and a dry surface with good sliding properties. This product has a viscosity at 23°C (D 40 s^-1) of < 1,200 mPa·s, a non-volatile content (0.9-1.1g / 1h / 125 °C, convection oven) of 40 ± 1%, and a pH of 7.5 ± 1.5. view less | |
| Nebores® HPA 60-80 BA | NECARBO B.V. | Nebores® HPA 60-80 BA is a specially modified hydroxy polyester resin. This light yellow liquid consists of 80% butyl acetate and provides gloss and filling properties, and has weather, chemical, scratch, and abrasion resistance. Nebores® HPA 60-80 BA fin...view more Nebores® HPA 60-80 BA is a specially modified hydroxy polyester resin. This light yellow liquid consists of 80% butyl acetate and provides gloss and filling properties, and has weather, chemical, scratch, and abrasion resistance. Nebores® HPA 60-80 BA finds application in high solid polyurethane lacquers and in high quality air and oven drying industrial lacquers. view less | |
| SYNTHOESTER 186 HS | Synthopol Chemie Germany | SYNTHOESTER 186 HS is a hydroxyl group-containing, high solid polyester resin. It is suitable for use in combination with melamine resins and CAB for base-coat enamels. This product can also be used with aliphatic polyisocyanates air- and oven-drying 2 pa...view more SYNTHOESTER 186 HS is a hydroxyl group-containing, high solid polyester resin. It is suitable for use in combination with melamine resins and CAB for base-coat enamels. This product can also be used with aliphatic polyisocyanates air- and oven-drying 2 pack high-solid laquers and fillers with high mechanical properties, high gloss and body, very good chemical- and weather resistance. view less | |
| SYNTHOESTER 215 HS | Synthopol Chemie Germany | SYNTHOESTER 215 HS is a hydroxyl group containing, high solid polyester resin. It is suitable for use in combination with melamine resins and CAB for base-coat enamels. This product can also be used with aliphatic polyisocyanates air- and oven-drying 2 pa...view more SYNTHOESTER 215 HS is a hydroxyl group containing, high solid polyester resin. It is suitable for use in combination with melamine resins and CAB for base-coat enamels. This product can also be used with aliphatic polyisocyanates air- and oven-drying 2 pack high-solid laquers and fillers with high mechanical properties, high gloss and body, very good chemical- and weather resistance. view less | |
| Polisat 768-80 AB | Polidur San Luis | Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use i...view more Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use in 2 K PU laquers, lacquers for plastics and leather, overprinting varnishes and is an elasticity modifier of acrylic resins. view less | |
| RESYDROL® AY 5537w/35WA | Allnex | Resydrol® AY 5537w/35WA is an acrylic modified, oil-free saturated polyester resin in aqueous emulsion with incorporated catalyst. It is suited for the production of waterborne high-quality white and coloured one-coat finishes or top coats with good weath...view more Resydrol® AY 5537w/35WA is an acrylic modified, oil-free saturated polyester resin in aqueous emulsion with incorporated catalyst. It is suited for the production of waterborne high-quality white and coloured one-coat finishes or top coats with good weathering resistance for industrial applications (machines, instruments). For film formation Resydrol AY 5537w must be crosslinked with amino resins suitable for aqueous systems. view less | Request Sample |
| ROSKYDAL® 500 A | Allnex | ROSKYDAL® 500 A is a wax-free unsaturated polyester resin which cures to yield hard, scratch-resistant films for brilliant high-gloss or matt finishes with good chemical resistance. Coatings formulated with ROSKYDAL® 500A have very good flow properties. T...view more ROSKYDAL® 500 A is a wax-free unsaturated polyester resin which cures to yield hard, scratch-resistant films for brilliant high-gloss or matt finishes with good chemical resistance. Coatings formulated with ROSKYDAL® 500A have very good flow properties. The addition of up to 30% ROSKYDAL®E 70 improves the flexibility and polishability of the films without reducing the scratch resistance. view less | Request Sample |
| SYNTHOESTER 1018 | Synthopol Chemie Germany | SYNTHOESTER 1018 is a highly branched, saturated polyester containing hydroxyl groups, modified with a low molecular weight fatty acid. It can be used in combination with aliphatic or aromatic polyisocyanates, air- and stove-drying two-component coatings ...view more SYNTHOESTER 1018 is a highly branched, saturated polyester containing hydroxyl groups, modified with a low molecular weight fatty acid. It can be used in combination with aliphatic or aromatic polyisocyanates, air- and stove-drying two-component coatings with good weathering resistance. The main field of application for SYNTHOESTER 1018, in combination with Desmodur L or HL, is the furniture sector. view less | |
| ACURE™ 510-375 | Allnex | ACURE™ 510-375 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE, non-isocyanate, coatings systems. Acure topcoats based on Acure 510-375 feature excellent hardness development coupled with excellent ou...view more ACURE™ 510-375 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE, non-isocyanate, coatings systems. Acure topcoats based on Acure 510-375 feature excellent hardness development coupled with excellent outdoor durability, high crosslink densities and outstanding chemical resistance. ACURE 510-375 contains 1.5% succinimide, a kinetic additive, which increases pot-life and open time. view less | Request Sample |
| CRYLCOAT® E 04824 | Allnex | CRYLCOAT® E 04824 is a carboxyl functional polyester resin for use with HAA hardeners in the production of low gloss powder coatings with a 60° gloss range of approx. 3% to 7%. The resin is superdurable by design, correspondent matte coatings should be c...view more CRYLCOAT® E 04824 is a carboxyl functional polyester resin for use with HAA hardeners in the production of low gloss powder coatings with a 60° gloss range of approx. 3% to 7%. The resin is superdurable by design, correspondent matte coatings should be checked for outdoor durability. Coatings based on CRYLCOAT® E 04824 exhibit very good mechanical properties, flow and smoothness. view less | Request Sample |
| CRYLCOAT® E 04884 | Allnex | CRYLCOAT® E 04884 is a carboxylated polyester resin for use with HAA hardeners in the production of low gloss single extrusion powder coatings with a 60° gloss range of approx. 20 to 30%. The resin is superdurable by design, correspondent matte coatings s...view more CRYLCOAT® E 04884 is a carboxylated polyester resin for use with HAA hardeners in the production of low gloss single extrusion powder coatings with a 60° gloss range of approx. 20 to 30%. The resin is superdurable by design, correspondent matte coatings should be checked for outdoor durability. Coatings based on CRYLCOAT® E 04884 exhibit very good mechanical properties, flow, smoothness. view less | Request Sample |
| CRYLCOAT® 2658-3 | Allnex | CRYLCOAT® 2658-3 is a high carboxylated polyester resin for use with Primid® XL-552 in the production of dry-blend matte powders. Coatings based on CRYLCOAT® 2658-3 and CRYLCOAT® 2668-3 can achieve gloss levels of 18 to 23 %. These coatings exhibit very g...view more CRYLCOAT® 2658-3 is a high carboxylated polyester resin for use with Primid® XL-552 in the production of dry-blend matte powders. Coatings based on CRYLCOAT® 2658-3 and CRYLCOAT® 2668-3 can achieve gloss levels of 18 to 23 %. These coatings exhibit very good mechanical properties, good flow, improved water-spot resistance and outdoor durability meeting Qualicoat or GSB specifications. view less | Request Sample |
| Resipur® 9187 | Omnova Solutions | Resipur® 9187 is an opaque pinky liquid, free of impurities and is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated, and thixotropic which contains paraffin. It presents a low styrene emission during the curing process. Du...view more Resipur® 9187 is an opaque pinky liquid, free of impurities and is an orthophtalic unsaturated polyester resin of medium reactivity, pre-accelerated, and thixotropic which contains paraffin. It presents a low styrene emission during the curing process. Due to this fact, Resipur® 9187 is considered to be an ecological resin, and is used for rigid laminates produced by hand lay-up or spray-up. view less | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...view more BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. view less | |
| Benester 694 | Benasedo | Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...view more Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. view less | Request Sample |
| Novasynt S1531-60 | Novaresine S.r.l | Novasynt S1531-60 is a saturated polyester that is flexible and designed for sterilizable clear and pigmented can coatings, offering deep drawing properties. It is mainly used for coil coatings in order to improve flexibility when blended with other resin...view more Novasynt S1531-60 is a saturated polyester that is flexible and designed for sterilizable clear and pigmented can coatings, offering deep drawing properties. It is mainly used for coil coatings in order to improve flexibility when blended with other resins. It can be used alone for back coatings and for ceilings and outdoor purposes where exterior durability requirements are not too strict. view less | |
| Novasynt S1545-60 | Novaresine S.r.l | Novasynt S1545-60 is a saturated polyester that is very flexible and made for sterilizable clear and pigmented can coatings, offering deep drawing properties. It is mainly ued for coil coatings to improve flexibility when blended with other resins. Novasy...view more Novasynt S1545-60 is a saturated polyester that is very flexible and made for sterilizable clear and pigmented can coatings, offering deep drawing properties. It is mainly ued for coil coatings to improve flexibility when blended with other resins. Novasynt S1545-60 can be used alone for back coatings and for outdoor objects where exterior durability requirements are not too stringent. view less | |
| Benester 839 | Benasedo | Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...view more Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less | Request Sample |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...view more Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. view less | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...view more Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. view less | |
| EBECRYL® LED 02 | Allnex | EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, th...view more EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process. view less | Request Sample |
| Polisat 738-65 X | Polidur San Luis | Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane prime...view more Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer. view less | |
| RESYDROL® AN 6617w/65MPP | Allnex | Resydrol® AN 6617w/65MPP is a special water dilutable Polyester-resin Solution. In combination with suitable Polyisocyanates Resydrol® AN 6617w is especially recommended for low-solvent Soft-Feel-coatings. These coatings provide excellent adhesion to diff...view more Resydrol® AN 6617w/65MPP is a special water dilutable Polyester-resin Solution. In combination with suitable Polyisocyanates Resydrol® AN 6617w is especially recommended for low-solvent Soft-Feel-coatings. These coatings provide excellent adhesion to different plastic substrates such as ABS, PC, ABS/PC or Polyamide. Accordingly Resydrol® AN 6617w can be used as modifier resin to improve adhesion properties of e. g. waterborne acrylic resins. view less | Request Sample |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...view more Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. view less | |
| ACURE™ 510-300 | Allnex | ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent out...view more ACURE™ 510-300 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acute based topcoats based on ACURE™ 510-300 feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities and outstanding chemical resistance. ACURE™ paints exhibit extremely fast dry times combined with long pot lives and tuneable open times. view less | Request Sample |
| SYNTHOESTER TS 1713 | Synthopol Chemie Germany | SYNTHOESTER TS 1713 is a hydroxyl group containing, high solid polyester resin. It can be used in combination with melamine resins and CAB for base-coat enamels. This product is also suitable for use in combination with aliphatic polyisocyanates air- and ...view more SYNTHOESTER TS 1713 is a hydroxyl group containing, high solid polyester resin. It can be used in combination with melamine resins and CAB for base-coat enamels. This product is also suitable for use in combination with aliphatic polyisocyanates air- and oven-drying 2 pack high-solid laquers and fillers with high mechanical properties, high gloss and body, very good chemical- and weather resistance. view less | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...view more Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). view less | |
| Synteven 052 | Galstaff Multiresine S.p.A. | Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated po...view more Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated polyesters to formulate two pack polyurethane coatings with very high flexibility for wood ,metal and plastics support. Is necessary in combination with isocynate, to have a good dry film, greatly overcrosslinked. view less | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...view more BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. view less | |
| EBECRYL® 875 | Allnex | EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, p...view more EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates. EBECRYL® 875 also exhibits low odor. view less | Request Sample |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...view more Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. view less | |
| Baybond® PU 405 | Covestro | Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. | |
| Baybond® PU 406 | Covestro | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. | |
| GENOMER* 3611 | Rahn AG | GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigme...view more GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigment wetting, high reactivity, good scratch and solvent resistance, high abrasion resistance, and very good lithographic behavior. This product is used in flexo inks and varnishes, as well as in offset inks and varnishes. view less | Request Sample |
| Inokem EXP 1001 | Ecoat Sas | Inokem EXP 1001 is an 80% bio based polyester resin that is designed for use as a binder to develop water borne alternatives to lime modified oils. This product is comprised of more than 99.9% active material and is commonly applied to high quality interi...view more Inokem EXP 1001 is an 80% bio based polyester resin that is designed for use as a binder to develop water borne alternatives to lime modified oils. This product is comprised of more than 99.9% active material and is commonly applied to high quality interior wall and ceiling paints where substrate cohesion is desired. Inokem EXP 1001 is light yellow in appearance and can be pre-diluted with 10% Dowanol DPnB. view less | |
| ACURE™ 510-302 | Allnex | ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resista...view more ACURE™ 510-302 is a malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-302 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. view less | Request Sample |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household ap...view more SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® HTT include excellent dishwasher detergent resistance, low yellowing, good gloss retention, and without addition of organotin-containing compounds. view less | Request Sample |
| Resipur® 2138 | Omnova Solutions | Resipur® 2138 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include r...view more Resipur® 2138 is a transparent slightly yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin of high reactivity. This product's delivery form is approximately 68% of polymer diluted in styrene, and its application areas include rigid laminates produced by hand lay-up and SMC (Sheet Moulding Compound). It can be cured at room temperature by means of the addition of an accelerator such as a cobalt and an initiator like a methyl ethyl ketone peroxide - MEKP. In order to obtain an ideal performance, it is recommended that the end product should not be used until 7 days after the cure. view less | |
| Synteven P3 GA-707 | Galstaff Multiresine S.p.A. | Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films...view more Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films are hard and resistant to scratching, chemicals and very good sandability. This product is used in the formulation of clear or pigmented coats for wood and furniture. The coating can be cured by conventional methods or U.V radiation. view less | |
| SYNTHOESTER 1130 | Synthopol Chemie Germany | SYNTHOESTER 1130 is a saturated polyester containing hydroxyl groups, modified with non-drying fatty acids. It is recommended for use in combination with isocyanate pre-polymers, such as Desmodur L, IL, HL, N, VL, for air-drying two-component polyurethane...view more SYNTHOESTER 1130 is a saturated polyester containing hydroxyl groups, modified with non-drying fatty acids. It is recommended for use in combination with isocyanate pre-polymers, such as Desmodur L, IL, HL, N, VL, for air-drying two-component polyurethane coatings. SYNTHOESTER 1130 is especially suitable for fast drying polyurethane coatings in combination with Desmodur IL or HL. The low OH-content makes relatively long pot lives of mixtures possible, providing very good application possibilities with casting machines. view less | |
| Synteven 713 R | Galstaff Multiresine S.p.A. | Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non highe...view more Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non higher then 10%,to avoid the presece of the micro bubbles in the film. Synteven 713 R is used to formulate high solids, clear and pigmented, coatings for wood and furniture monomer free, cured by conventional Hydroperoxide/Co. The films have very good air-releasing. view less | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...view more Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. view less | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| SYNTHOLUX 745 PAA | Synthopol Chemie Germany | SYNTHOLUX 745 PAA is a radiation-curing, amine-modified polyether acrylate of very low viscosity and high reactivity. It can be used alone as a binder of high reactivity or in combination with other radiation-curing resins to increase the reactivity in th...view more SYNTHOLUX 745 PAA is a radiation-curing, amine-modified polyether acrylate of very low viscosity and high reactivity. It can be used alone as a binder of high reactivity or in combination with other radiation-curing resins to increase the reactivity in the manufacture of radiation-curing coatings for paper, wood, plastics and printing inks. This binder can be used to produce films resistant to yellowing. view less | |
| SYNTHOLUX 1014 W | Synthopol Chemie Germany | SYNTHOLUX 1014 W is an aqueous, aliphatic polyurethane dispersion, physically drying and UV curable. It contains neither emulsifiers nor cosolvents. This product is recommended for use in coatings for wooden substrates showing high elasticity and good che...view more SYNTHOLUX 1014 W is an aqueous, aliphatic polyurethane dispersion, physically drying and UV curable. It contains neither emulsifiers nor cosolvents. This product is recommended for use in coatings for wooden substrates showing high elasticity and good chemical resistance. view less | |
| SYNTHOLUX 1160 PA | Synthopol Chemie Germany | SYNTHOLUX 1160 PA is a water-soluble, UV-curable polyether acrylate with a low viscosity and high reactivity. It is recommended for the production of UV or EB curable coatings with low viscosity, high solids content, free from monomers and free from organ...view more SYNTHOLUX 1160 PA is a water-soluble, UV-curable polyether acrylate with a low viscosity and high reactivity. It is recommended for the production of UV or EB curable coatings with low viscosity, high solids content, free from monomers and free from organic solvents. It is possible to solve the resin in a small amount of water. view less | |
| SYNTHOLUX 1720 W | Synthopol Chemie Germany | SYNTHOLUX 1720 W is a waterborne, physically drying, UV-curable, aliphatic polyurethane dispersion. It is especially recommended for pigmented wood coatings with good adhesion, elasticity, and hardness. This product offers enhanced chemical resistance for...view more SYNTHOLUX 1720 W is a waterborne, physically drying, UV-curable, aliphatic polyurethane dispersion. It is especially recommended for pigmented wood coatings with good adhesion, elasticity, and hardness. This product offers enhanced chemical resistance for colored stains. view less | |
| ACURE™ 510-190 | Allnex | ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardnes...view more ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardness development coupled with excellent outdoor durability, high cross line densities, outstanding chemical resistance and improved SAG resistance on vertical surfaces. view less | Request Sample |
| F220 Polyaspartics Resin | DKSH | F220 is a polyaspartic resin (amine-functional aspartic ester resin), a reactive partner for polyisocyanates (HDI derivates). A solvent free aminefunctional resin, formulated to be tough but flexible, lightfast and a highly reactive two-component polyuret...view more F220 is a polyaspartic resin (amine-functional aspartic ester resin), a reactive partner for polyisocyanates (HDI derivates). A solvent free aminefunctional resin, formulated to be tough but flexible, lightfast and a highly reactive two-component polyurethane spray coating • F220, applied in SPUA (spraying elastomeric polyurea) R component as an extender and main resin, anticorrosion coatings for steel structures, oil pipelines heavy and light corrosion protection, bubble landscape, concrete waterproofing materials. This product is available in Europe except UK. view less | Request Sample |
| F520 Polyaspartics Resin | DKSH | F520 is a polyaspartic resin (amine-functional aspartic ester resin), a solvent-free coating materials and a reactive partner for polyisocyanates (HDI derivatives). Formulate high-solids, two-component polyurethane topcoats and solvent-free coating materi...view more F520 is a polyaspartic resin (amine-functional aspartic ester resin), a solvent-free coating materials and a reactive partner for polyisocyanates (HDI derivatives). Formulate high-solids, two-component polyurethane topcoats and solvent-free coating materials • It can also react with -NCO functional HDI trimer from which a longer gelling time and excellent yellow resistance can be achieved. Longer gelling time can also be obtained when mixing with F-420 and F-524 to achieve a pure aspartic polyurea coating with high build and fast dry two pack coating system F-520 is also compatible with other hydroxyl-functional resin e.g. acrylic, alkyd. It is widely used in protective/floor/elastic/weather resistant coating, waterproof etc. This product is available in Europe except UK. view less | Request Sample |
| F420 Polyaspartics Resin | DKSH | F420 is a polyaspartic resin (amine-functional aspartic ester resin), a solvent free amine-functional resin. It is an aspartic ester polymer as reactive partner for polyisocyanates (HDI derivates). Formulate high-solids, two-component polyurethane topcoat...view more F420 is a polyaspartic resin (amine-functional aspartic ester resin), a solvent free amine-functional resin. It is an aspartic ester polymer as reactive partner for polyisocyanates (HDI derivates). Formulate high-solids, two-component polyurethane topcoats and solvent-free coating materials • It can serve as chain extender or R component in polyurea coating. It can also react with -NCO functional HDI trimmer from which a longer gelling time and excellent yellow resistance can be achieved. Longer gelling time can also be obtained when reacted with MDI pre-polymer. Hybrid of polyurea and polyurethane can be achieved when F420 is blended with hydroxyl-functional resin e.g. acrylic, alkyd. This can offer high solid content and faster dry time than ordinary polyurethane. It is widely used in protective/floor/elastic/weather resistant coating, waterproof etc. This product is available in Europe except UK. view less | Request Sample |
| ST-033 | SHINA T&C | ST-033 is an ester polythiol with low viscosity, good adhesion and flexibility. | |
| WorléePol® V 450 | Worlée-Chemie G.m.b.H. | WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plastic...view more WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plasticizer. Due to the high reactivity it is possible to cure application quantities of approx. 25 g/m² wet film during 20 - 30 s at approx. 140 °C or 40 - 60 s at approx. 130 °C and excellent resistance properties are achieved. view less | |
| Sintopol E 222/100% | Sintochem s.r.l. | Sintopol E 222/100% is a clear yellow-brown color polyester resin partially tri-functional. This product can be used for two components with low temperature drying polyurethane varnishes, and two components rotogravure inks for paper and plastic films wit...view more Sintopol E 222/100% is a clear yellow-brown color polyester resin partially tri-functional. This product can be used for two components with low temperature drying polyurethane varnishes, and two components rotogravure inks for paper and plastic films with a gloss finish. Sintopol E 222/100% is particularly suitable for hydroxyl components in polyurethane varnishes and urethane ink that are two components. Sintopol E 222/100% is primarily used as a reactive compound in inks, adhesives, sealants, paints and coatings. It allows the production of hard and grease resistant films that are also flexible. view less | |
| Benester LD 75 R in Isobutyl Acetate | Benasedo | Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate ve...view more Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate version. This product has an 80% solids content, a viscosity [G.H.] of Z1-Z3, a colour [G.H.] maximum of 3, and an A.V. solids amount of 24-36. view less | Request Sample |
| Benester 2580 | Benasedo | Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...view more Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. view less | Request Sample |
| Benester LD 75 R in Styrene | Benasedo | Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This ...view more Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This product has a viscosity [G.H.] of X-Y, an A.V. solids content of 24-36, a 75% solids amount, and a color [G.H.] maximum of 3. view less | Request Sample |
| Polisat 714-70 HF | Polidur San Luis | Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high sol...view more Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high solids stoving enamels. view less | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...view more Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. view less | |
| Boltorn™ U3000 | Perstorp | Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comp...view more Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comply with recent VOC demands while still securing rapid drying and durability. view less | |
| ROSKYDAL® K 14 M | Allnex | ROSKYDAL® K 14 M can be used as a binder for highly filled knifing fillers, putties for marble and stone and adhesives. | Request Sample |
| ROSKYDAL® K 27/1 | Allnex | ROSKYDAL® K 27-1 can be used as a binder for highly filled knifing fillers and stoppers for marble and stone. | Request Sample |
| ROSKYDAL® K 30 | Allnex | ROSKYDAL® K 30 can be used as a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. | Request Sample |
| ROSKYDAL® K 40 T | Allnex | ROSKYDAL® K 40 T can be used as a binder for highly thixotropic knifing fillers, especially for use in vehicle refinishing. | Request Sample |
| ROSKYDAL® K 45 | Allnex | ROSKYDAL® K 45 can be used as a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. | Request Sample |
| ROSKYDAL® K 58 | Allnex | ROSKYDAL® K 58 can be used as a binder in the formulation of highly filled UP knifing fillers with good sandability and good adhesion on all automotive substrates. | Request Sample |
| ROSKYDAL® K 65 | Allnex | ROSKYDAL® K 65 can be used as a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. | Request Sample |
| ROSKYDAL® K 68 | Allnex | ROSKYDAL® K 68 can be used as a binder for highly filled knifing fillers, especially for use with stoving coating systems. | Request Sample |
| Polyol 4290 | Perstorp | Polyol 4290 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4290 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4360 | Perstorp | Polyol 4360 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4360 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4525 | Perstorp | Polyol 4525 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4525 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4640 | Perstorp | Polyol 4640 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4640 is also used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R2490 | Perstorp | Polyol R2490 is a difunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. Polyol R2490 is also used as a chemical building block and as crosslinker in polyurethanes. | |
| Polyol R3430 | Perstorp | Polyol R3430 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3530 | Perstorp | Polyol R3530 is a trifunctional liquid polyol with secondary OH-groups, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3540 | Perstorp | Polyol R3540 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3600 | Perstorp | Polyol R3600 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4630 | Perstorp | Polyol R4630 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4631 | Perstorp | Polyol R4631 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R6405 | Perstorp | Polyol R6405 is a hexafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| VYLON 200 | DKSH | VYLON 200 is a high molecular weight copolyester, with high Tg. VYLON 200 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON 200 is suitable for inks, primers, coating and adhesion, heat seal lacquers for fle...view more VYLON 200 is a high molecular weight copolyester, with high Tg. VYLON 200 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON 200 is suitable for inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON 200 has an excellent flexibility, bending performance, workability, corrosion resistance, durability, heat-resistance, solvent solubility, pigment dispersibility and flame resistance. VYLON 200 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. view less | Request Sample |
| VYLON GK-255 | DKSH | VYLON GK-255 is a high molecular weight copolyester, with high Tg. VYLON GK-255 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON GK-255 is suitable for inks, primers, coating and adhesion, heat seal lacquer...view more VYLON GK-255 is a high molecular weight copolyester, with high Tg. VYLON GK-255 has an excellent adhesion to various substrate materials such as PET, PVC, and metals... VYLON GK-255 is suitable for inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON GK-255 has an excellent flexibility, solvent solubility with high acid value. VYLON GK-255 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. view less | Request Sample |
| VYLON GK-360 | DKSH | VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen pr...view more VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen printing inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON GK-360 is compliant with FDA 175.105. This product is available in Europe, USA and India. view less | Request Sample |
| VYLON GK-888 | DKSH | VYLON GK-888 is a high molecular weight copolyester, with high Tg. VYLON GK-888 has an excellent chemical resistance due to its high Tg. VYLON GK-888 is suitable for can and coil coatings. VYLON GK-888 is compliant with FDA 175.105 and EC 10/2011. Thi...view more VYLON GK-888 is a high molecular weight copolyester, with high Tg. VYLON GK-888 has an excellent chemical resistance due to its high Tg. VYLON GK-888 is suitable for can and coil coatings. VYLON GK-888 is compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. view less | Request Sample |
| VYLON 103 | DKSH | VYLON 103 is a high molecular weight copolyester with medium Tg. VYLON 103 has very good adhesion properties on PVC, PET and other plastics. VYLON 103 is compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. | Request Sample |
| VYLON 600 | DKSH | VYLON 600 is a high molecular weight copolyester with medium Tg. VYLON 600 has excellent adhesion strength on metal, PET and PVC. Particularly recommended on coil coating and TTR. VYLON 600 is compliant with FDA 175.105 (only for non alcoholic food and...view more VYLON 600 is a high molecular weight copolyester with medium Tg. VYLON 600 has excellent adhesion strength on metal, PET and PVC. Particularly recommended on coil coating and TTR. VYLON 600 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011. This product is available in Europe, USA and India. view less | Request Sample |
| VYLON 630 | DKSH | VYLON 630 is a high molecular weight copolyester with low Tg. VYLON 630 has excellent flexibility and good general adhesion strength. VYLON 630 is recommended for adhesion on PET, PVC, metals, coil and can coatings. VYLON 630 is compliant with FDA 175....view more VYLON 630 is a high molecular weight copolyester with low Tg. VYLON 630 has excellent flexibility and good general adhesion strength. VYLON 630 is recommended for adhesion on PET, PVC, metals, coil and can coatings. VYLON 630 is compliant with FDA 175.105 (only for non alcoholic food and beverage). This product is available in Europe, USA and India. view less | Request Sample |
| VYLON 670 | DKSH | VYLON 670 is a high molecular weight copolyester with low Tg. VYLON 670 has excellent adhesion on metal and PET. VYLON 670 is recommended for heat seal application and coil coating. VYLON 670 is compliant with FDA 175.105 (only for non alcoholic food a...view more VYLON 670 is a high molecular weight copolyester with low Tg. VYLON 670 has excellent adhesion on metal and PET. VYLON 670 is recommended for heat seal application and coil coating. VYLON 670 is compliant with FDA 175.105 (only for non alcoholic food and beverage) and EC 10/2011 This product is available in Europe, USA and India. view less | Request Sample |
| VYLONAL MD-2000 | DKSH | VYLONAL MD-2000 is a waterbased, high molecular weight copolyester. VYLONAL MD-2000 series have a high Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-2000 series are compliant with FDA 175.105 and EC 10/2011. This produc...view more VYLONAL MD-2000 is a waterbased, high molecular weight copolyester. VYLONAL MD-2000 series have a high Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-2000 series are compliant with FDA 175.105 and EC 10/2011. This product is available in Europe, USA and India. view less | Request Sample |
| VYLONAL MD-1480 | DKSH | VYLONAL MD-1480 is a waterbased, high molecular weight copolyester. VYLONAL MD-1480 series have a Low Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-1480 series are compliant with FDA 175.105 and EC 10/2011 This product ...view more VYLONAL MD-1480 is a waterbased, high molecular weight copolyester. VYLONAL MD-1480 series have a Low Tg, are 100% solvent free and have Good adhesion strength on PET. VYLONAL MD-1480 series are compliant with FDA 175.105 and EC 10/2011 This product is available in Europe, USA and India. view less | Request Sample |
| ACURE™ 510-372 | Allnex | ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/ma...view more ACURE™ 510-372 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. Acure™ topcoats based on Acure™ 510-372 feature fast development high hardness, excellent scratch/mar resistance, good flow and leveling, high cross-link densities, excellent solvent resistance, low applied VOCs, and good outdoor durability. Acure™ paints exhibit extremely fast dry times with long pot lives and tuneable open times. Acure 510-372™ contains 1.4 – 1.5% succinimide, a kinetic additive, which increases pot-life and open time. view less | Request Sample |
| Benester L 83 | Benasedo | Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [...view more Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [G.H.] of Z-Z1, an A.V. solids amount of 2-6, and a color [G.H.] maximum of 3, and an OH solids amount of 1.0-1.2. view less | Request Sample |
| Benester PZ 300 | Benasedo | Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component...view more Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component polyurethane systems for metals, flexibilizing vehicles for can and coil-coating systems, and tinting pastes for plastics. view less | Request Sample |
| Benester 602 | Benasedo | Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...view more Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. view less | Request Sample |
| Desmophen® C 2100 | Covestro | Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. Used as a high-grade building block for a variety of polyurethane systems. | |
| Desmophen® C 2200 | Covestro | Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 2,000 g/mol. Used as a high-grade building block for a variety of polyurethane systems. | |
| Desmophen® C 3100 XP | Covestro | Desmophen® C 3100 XP is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. Used as a high-grade building block for a variety of polyurethane systems. |
