| Curing Agent C8 | Ichemco | Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to...view more Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...view more CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. view less | |
| CV1-2566 | NuSil Silicone Technology 1 | CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low ...view more CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low outgassing this is the ideal sealant for the job. view less | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...view more CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. view less | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...view more CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. view less | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...view more CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...view more Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. view less | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for sil...view more DOWSIL™ Z-6121 Silane is a multi-purpose silane adhesion promoter recommended for use with epoxy coatings, silicone resin-based coatings and alkyd finishes. It can be incorporated into epoxy coatings, can be used as a room-temperature curing agent for silicone resin based coatings, and can be used with alkyd coatings. view less | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
| Drodur™ L 75 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodur™ L 75 is a liquid aromatic polyisocyanate based on toluene di-isocyanate. | |
| Dynasylan® 1505 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification...view more Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification of polymers. view less | |
| Dynasylan® 2201 EQ | Evonik Operations GmbH, BL Silanes | Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g....view more Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic olymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 2201 EQ is a 50% solution of silane in methanol, is a colorless liquid with an alcohol-like odor and is soluble in alcohols, ketones, esters or aromatic hydrocarbons. Due to novel patented process, Dynasylan® 2201 EQ is the first ureidofunctional silane, which contains no carcinogenic by-products, e.g. ethylcarbamate. Dynasylan® 2201 EQ is therefore not classified as "carcinogenic, class 2". view less | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...view more Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Dynasylan® 6498 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. k...view more Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6498, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Dynasylan® 6598 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. It is a colourless, nearly odorless low viscosity liquid. This product is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organi...view more Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. It is a colourless, nearly odorless low viscosity liquid. This product is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (EPDM, EVA, PE). The application of Dynasylan® 6598 in mineral filled and peroxide crosslinked cable systems results in improved mechanical and electrical properties, especially upon exposure to moisture. The high boiling start of Dynasylan® 6598, together with its high flash point, gives it several advantages over monomeric silanes with respect to safety, handling and processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is considerably less than for monomeric silanes. view less | |
| Dynasylan® HYDROSIL 1151 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL ...view more Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water. view less | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® HYDROSIL 2776 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2776 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| DYNASYLAN® HYDROSIL 2926 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2926 is a water-borne inorganic binder for high temperature inorganic coatings. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...view more Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | Request Sample |
| Dynoadd® F-802 | Dynoadd by Dynea | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...view more Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. view less | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | Request Sample |
| Eastman Advantis™ 510W | Eastman Chemical B.V. | Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blen...view more Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blend-in resin in waterborne primers and waterborne basecoats for automotive bumper applications. Eastman Advantis™ 510W can also be used as a wash primer and is suitable as an adhesion promoter for applications beyond automotive. Eastman Advantis™ 510W provides excellent adhesion on non-flame treated EPDM rubber modified polypropylene substrates. view less | |
| EBECRYL® 168 | Allnex | EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube...view more EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations. view less | Request Sample |
| EBECRYL® 170 | Allnex | EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, co...view more EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, and solder resist formulations. view less | Request Sample |
| EBECRYL® 171 | Allnex | EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates. | Request Sample |
| EBECRYL® 411 | Allnex | EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacr...view more EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA)(1) monomer. view less | Request Sample |
| EBECRYL® 416 | Allnex | EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to...view more EBECRYL® 416 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with trimethylolpropane triacrylate (TMPTA) (1) monomer. Films of EBECRYL® 416 cured by ultraviolet light (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. view less | Request Sample |
| EBECRYL® 417 | Allnex | EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals...view more EBECRYL® 417 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted with EBECRYL® 50, a tetra functional diluting acrylate. Films of EBECRYL® 417 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. view less | Request Sample |
| EBECRYL® 418 | Allnex | EBECRYL® 418 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted in OTA 480. Films of EBECRYL® 418 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper. | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion...view more EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones. view less | Request Sample |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...view more ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. view less | Request Sample |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...view more ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. view less | Request Sample |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...view more ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. view less | Request Sample |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...view more ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. view less | Request Sample |
| EPOCROS™ WS-500 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It e...view more EPOCROS™ WS-500 acts as a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). EPOCROS™ WS-500 is used in coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. view less | Request Sample |
| EPOCROS™ WS-700 | NIPPON SHOKUBAI CO., LTD. | EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crossl...view more EPOCROS™ WS-700 is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. It provides film properties, low toxicity, fast drying and improved water- & heat resistance. It allows crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition. It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC). Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing. EPOCROS™ WS-700 has a long pot life for one packaging. view less | Request Sample |
| Fumed Silica A 200R | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A 200R is a hydrophilic fumed silica with specific surface area around 180m2/g. It provides excellent dispersion and high thickening properties. Mainly be used for Medium transparent, high transparent silicone sealant adhesive. | |
| Fumed Silica A-200 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200 is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use in high temperature silicon rubber, adhesive and sealants, and paints, coatings and printing inks. | |
| Fumed Silica A-200K | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200K is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use as an electronic sealant and a ceramic tile sealant. | |
| Fumed Silica A-380 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-380 is a hydrophilic fumed silica with specific surface area around 380m2/g. It provides excellent reinforcement and good transparency. Mainly be used for liquid silicon rubber. | |
| Fumed Silica A150 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A150 is a hydrophilic fumed silica with specific surface area around 150m2/g. It provides excellent dispersion and provides improved reinforcing and thixotropy properties. Mainly used to produce RTV Silicon Adhesive. | |
| GENIOSIL® GF 93 | Wacker Chemie AG | GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...view more GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. view less | |
| GENIOSIL® XL 33 | Wacker Chemie AG | GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...view more GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. view less | |
| GENORAD* 40 | Rahn AG | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...view more GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. view less | Request Sample |
| GENORAD* 41 | Rahn AG | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...view more GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. view less | Request Sample |
| HARDLEN 13LP | DKSH | HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...view more HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN 15-LP | DKSH | HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated p...view more HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated polypropylene films and good solubility in solvent (Toluene). This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-1321P | DKSH | HARDLEN CY-1321P is an adhesion promoter for polyolefin. It is focued on the solution stability which Chlorinated Polyolefin with maleic anhydride groups is dissolved in. A Paint which contains CY-1321P does not generate gel even at low temperature due to...view more HARDLEN CY-1321P is an adhesion promoter for polyolefin. It is focued on the solution stability which Chlorinated Polyolefin with maleic anhydride groups is dissolved in. A Paint which contains CY-1321P does not generate gel even at low temperature due to our new modification method. HARDLEN CY-1321P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, good air-dry adhesion originated from the polymer design, easily dissolves in toluene, xylene or other aromatic hydrocarbon solvents and easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-9122P | DKSH | HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without so...view more HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY-9124P | DKSH | HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates wit...view more HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN CY2321P | DKSH | HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN CY2329 | DKSH | HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN DX-523P | DKSH | HARDLEN DX-523P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX.523P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-523P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX.523P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN DX-526P | DKSH | HARDLEN DX-526P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-526 has the following characteristics: excellent solubility in various solvents ...view more HARDLEN DX-526P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-526 has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN DX-530P | DKSH | HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN EH801J | DKSH | HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN EW5250 | DKSH | HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN EW5515 | DKSH | HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN EZ2250 | DKSH | HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN F-225P | DKSH | HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN F-2P | DKSH | HARDLEN F-2P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN F-2P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN ...view more HARDLEN F-2P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN F-2P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN F-2P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol resistance after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN F-6P | DKSH | HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion ...view more HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint. (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol resistance after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN HM-21P | DKSH | HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARD...view more HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN HM-21P main characteristics are: good adhesion to PP, TPO(Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatment, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint, excellent resistance against Water, Gasoline and Gasohol after top-coating. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN M-28P | DKSH | HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLE...view more HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN M-28P main characteristics are good adhesion to PP, TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| HARDLEN NZ1004 | DKSH | HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| HARDLEN NZ1015 | DKSH | HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less | Request Sample |
| High Adhesion Ketone Resin INT 105 | Intech Synthetic Materials | High Adhesion Ketone Resin INT 105 belongs to the INT Ketone resin range and featured by low viscosity, high adhesion and excellent ethanol solubility;Soluble in organic solvents and compatible with most coating/printing ink raw materials; Used as grindi...view more High Adhesion Ketone Resin INT 105 belongs to the INT Ketone resin range and featured by low viscosity, high adhesion and excellent ethanol solubility;Soluble in organic solvents and compatible with most coating/printing ink raw materials; Used as grinding resin and adhesion reinforcing additive. view less | |
| High softening Point Aldehyde Resin INT A101 | Intech Synthetic Materials | High softening Point Aldehyde Resin INT A101 is chemically the same to INT A81 but with a higher softening point for some applications with requirements on this aspect, especially to prevent from blocking while in ocean freight process. | |
| High Softening Point (HSP) Aldehyde Resin INT 3120 | Intech Synthetic Materials | High Softening Point (HSP) Aldehyde Resin INT 3120 is a crystal or light yellow solid, aldehyde resin derivative. It has a high softening point of 115-125°C, is highly compatible, and soluble except in water. This product is unique for containing zero amo...view more High Softening Point (HSP) Aldehyde Resin INT 3120 is a crystal or light yellow solid, aldehyde resin derivative. It has a high softening point of 115-125°C, is highly compatible, and soluble except in water. This product is unique for containing zero amounts of benzene, toluene, xylene, and ketones; therefore, making it very eco-friendly. It is powerful in improving the yellowing- and heat-resistance in oil paint and printing ink systems. It endows the coating film with good elasticity, adhesion, hardness, and toughness, and promotes wood's natural grain and color. view less | |
| High Softening Point Ketone Resin INT 130 | Intech Synthetic Materials | High Softening Point Ketone Resin INT 130 belongs to the INT Ketone resin range with a softening point as high as 140 ℃, it’s used for some circumstances with high requirements on softening temperature, but its color is a little dark compared with other ...view more High Softening Point Ketone Resin INT 130 belongs to the INT Ketone resin range with a softening point as high as 140 ℃, it’s used for some circumstances with high requirements on softening temperature, but its color is a little dark compared with other specs in this line of products. view less | |
| Hydro PLIOLITE® 330 | Omnova Solutions | Hydro PLIOLITE® 330 is a water-based binder that promotes excellent adhesion and blocking resistance even when dried under cold and wet weather conditions. | |
| Hydrophobic Fumed Silica R1202 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives a...view more Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, and able glue, Coating, and Copier toner. view less | |
| Hydrophobic Fumed Silica R1208 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sea...view more Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, able glue, Coating, and Copier toner. view less | |
| ITAMID FL520/S | DKSH | ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...view more ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. This product is available in Spain and Portugal. view less | Request Sample |
| ITAMID M20P | DKSH | ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water re...view more ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M20P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. The ITAMID M20P has an excellent solubility with ethyl alcohol, and is also cosolvent-soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. The ITAMID M20P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M20P is generally incompatible with polyesters, vinyl resins and urea. This product is available in Spain and Portugal. view less | Request Sample |
| ITAMID M21P | DKSH | ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resist...view more ITAMID M21P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). ITAMID M21P is particularly useful for the formulation of inks “flex” and “rotogravure” where over membership, gloss and water resistance, are also required a higher resistance to ink “gel”, one of his quick recovery from the phase of “gel” and a resistance to “blocking”. ITAMID M21P has an excellent solubility with ethyl alcohol, and is also cosolvent- soluble systems, typically mixtures of alcohols and aliphatic hydrocarbons and / or aromatic. ITAMID M21P is compatible with most of the phenolic resins, maleic, that tonic, waxes and plasticizers monometric. The ITAMID M21P is generally incompatible with polyesters, vinyl resins and urea. This product is available in Spain and Portugal. view less | Request Sample |
| ITAMID M22P | DKSH | ITAMID M22P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M22P has an good solubility with ethyl alcohol, good chemical resistence and good nitrocellulose compatibility. The ITAMID...view more ITAMID M22P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives Fusion (Hot Melts). The ITAMID M22P has an good solubility with ethyl alcohol, good chemical resistence and good nitrocellulose compatibility. The ITAMID M22P is particularly useful for the formulation of inks “flex” and “rotogravure”. The ITAMID M22P show excellent adhesion, good flexibility, high gloss and good resistance to water, detergents, fat and oils. This product is available in Spain and Portugal. view less | Request Sample |
| JEFFAMINE® T-5000 Polyoxypropylenediamine | Huntsman Performance Products | JEFFAMINE® T-5000 Polyoxypropylenediamine is a trifunctional primary polyetheramine of approximately 5000 molecular weight used as crosslinker for polyurea, co-reactant in epoxy systems where adhesion promotion and flexibility are important. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-172 | BlueSky Chemical Co., Ltd. | LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....view more LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. view less | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...view more LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. view less | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...view more LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. view less | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...view more LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. view less | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...view more LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. view less | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...view more LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. view less | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| Luna-cure RFE | DKSH | Lunacure RFE is a highly efficient crosslinker. It can be used for adhesives based on polyurethane, synthetic or natural rubber. It also improves adhesion to rubber-based substrates. This product is available in Europe, Asia and North America. | Request Sample |
| Methylene Chloride | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cle...view more Methylene Chloride is an organic compound with the formula CH2Cl2. It has multiple applications for use in the production of adhesives, polyurethane foam, solvents in safety film, reaction medium in pharmaceuticals, paint strippers and removers, metal cleaning and degreasers. view less | |
| Michem® Prime 4983RHSA | Michelman | Michem® Prime 4983RHSA is a high solids dispersion which provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oiland solvent resistance of coatings and adhesives. Michem® Prime 4983RHS can serve as a ti...view more Michem® Prime 4983RHSA is a high solids dispersion which provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oiland solvent resistance of coatings and adhesives. Michem® Prime 4983RHS can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating or a nonwoven binder. view less | |
| NatureShield® 30 | Michelman | NatureShield® 30 contains 99.5% natural ingredients. This additive imparts good water bead to seed, wood and concrete coatings. |
