| Emulsogen® 4084 | Clariant International Ltd. | Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyv...view more Emulsogen® 4084 is a nonionic emulsifier for emulsion polymerization. This pale yellow wax is composed of block copolymer of propylene oxide and ethylene oxide, containing 60% w/w ethylene oxide. Emulsogen® 4084 is used in emulsion polymerization of polyvinyl acetate, acrylate and styrene/acrylate dispersions to stabilize the rheological behaviour of the polymer dispersions and to improve the electrolyte and shear stability. It can be used in combination with other nonionic, anionic and cationic surfactants. view less | |
| JEFFSOL® Butylene Carbonate | Huntsman Performance Products | JEFFSOL® Butylene Carbonate is an excellent solvent for many organic and inorganic materials for applications such as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder...view more JEFFSOL® Butylene Carbonate is an excellent solvent for many organic and inorganic materials for applications such as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder for foundry sand moulds. view less | |
| METOLAT® TH 75 | Munzing Chemie | METOLAT® is a brown liquid sulphated fish oil and sodium salt. METOLAT® TH 75 is an anionic emulsifier, which is recommended specifically for emulsifying mineral oils in water. It is miscible with mineral oils and vegetable oils. Aqueous solutions of METO...view more METOLAT® is a brown liquid sulphated fish oil and sodium salt. METOLAT® TH 75 is an anionic emulsifier, which is recommended specifically for emulsifying mineral oils in water. It is miscible with mineral oils and vegetable oils. Aqueous solutions of METOLAT® TH 75 show low foam tendency only. view less | |
| Provichem 2202 | Proviron | Provichem 2202 is a low colour ionic surfactant, specifically developed to give excellent stabilising performance in the emulsion polymerisation process. It is well known for its superior emulsion stability in vinyl acetate and acrylic systems, thus facil...view more Provichem 2202 is a low colour ionic surfactant, specifically developed to give excellent stabilising performance in the emulsion polymerisation process. It is well known for its superior emulsion stability in vinyl acetate and acrylic systems, thus facilitating the production of consistently high quality polymer dispersions. Its chemical functionalities make it a very effective co-polymerisable stabiliser for water based coatings and adhesives. view less | |
| Provichem 2203 | Proviron | Provichem 2203 is a very effective stabiliser for vinyl acetate and acrylic dispersions, where it is introduced during the emulsion polymerisation. It behaves like an anionic monomer and becomes an integral part of the polymer particles. The incorporated ...view more Provichem 2203 is a very effective stabiliser for vinyl acetate and acrylic dispersions, where it is introduced during the emulsion polymerisation. It behaves like an anionic monomer and becomes an integral part of the polymer particles. The incorporated sulfonate groups stabilise the polymer dispersion by an electrostatic mechanism. Unlike surfactant-type stabilisers, Provichem 2203 will not desorb from the polymer particles. It retains its stabilizing effect even under more severe conditions, such as high shear and freezing conditions. Provichem 2203 provides superior mechanical stability during formulation (especially high solid latex), storage (for example in winter time), transport and final use of the water-based coatings and adhesives. view less | |
| Provichem 220P | Proviron | Provichem 220P is an excellent additive in drilling fluids. It inhibits the formation of calcium, magnesium and barium sulfates in enhanced oil recovery operations. Additionally, it greatly enhances the viscosity of the aqueous solution in combination wit...view more Provichem 220P is an excellent additive in drilling fluids. It inhibits the formation of calcium, magnesium and barium sulfates in enhanced oil recovery operations. Additionally, it greatly enhances the viscosity of the aqueous solution in combination with xanthum gum for the recovery of viscous crude oil. Provichem 220P retains performance at high temperature, high pressure, and high salt concentrations making it the compound of choice for oil drilling applications. For example, the required dosage of Provichem 220P, for scale inhibition in carbon dioxide miscible floods, is up to ten times lower than comparative molecules (phosphonates and acrylic acid polymers) at a typical low pH value. view less | |
| SCHWEGO® Foam 6325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic cop...view more SCHWEGO® Foam 6325 is a defoamer for water-based coating systems. It is VOC- and silicone-free. This product is a liquid, very effective defoaming additive for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. SCHWEGO® foam 6325 is readily emulsifiable in water. SCHWEGO® foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters. view less | |
| SCHWEGO® Foam 8013 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8013 is a defoamer for water-based coating systems. This light yellowish, milky cloudy liquid is silicone free and is composed of a combination of hydrocarbons with emulsifying additives. This highly effective defoamer is suitable for all wa...view more SCHWEGO® Foam 8013 is a defoamer for water-based coating systems. This light yellowish, milky cloudy liquid is silicone free and is composed of a combination of hydrocarbons with emulsifying additives. This highly effective defoamer is suitable for all water based systems and adhesives, especially for those based on polyurethane and acrylate. It is easy to emulsify in water. view less | |
| SCHWEGO® Foam 8325 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a li...view more SCHWEGO® Foam 8325 is a liquid, very effective defoaming agent for all emulsion paints and particularly for those based on styrene/butadiene latex and acrylic copolymers. It is readily emulsifiable in water and is free from silicones. This product is a light yellowish liquid. view less |
