| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...view more Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. view less | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...view more Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. view less | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...view more Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. view less | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...view more Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. view less | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...view more Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. view less | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...view more Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. view less | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...view more Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. view less | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...view more Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. view less | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...view more Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). view less | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...view more BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. view less | |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...view more BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. view less | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...view more BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. view less | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...view more BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. view less | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...view more BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. view less | |
| BM820 | Pioneer Chemicals Co., Ltd. | BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromati...view more BM820, in the form of a powder, is a thermoplastic solid acrylic resin with good gloss, weather-ability, and unique hardness. It is easily soluble in numerous organic solvents such as esters, ketones, white spirit, long-chain fatty alcohol such as aromatic hydrocarbons and isopropanol. It also has good compatibility with other film forming resins such as other acrylic resins, vinyl resins, some alkyds, and is good for applications in plastic coating and aerosol spray. BM820 has a molecular weight of 250,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.61 to 0.63. view less | |
| BM9A | Pioneer Chemicals Co., Ltd. | BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorina...view more BM9A, in the form of a powder, is a polymer of iso-butyl methacrylate that offers good durability, gloss, heat resistance, pigment wettability, and high flexibility. It is easily soluble in numerous organic solvents such as high alcohol, ketones, chlorinated solvent, esters, aromatic hydrocarbons, and white gasoline. BM9A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is compatible with chlorinated paraffin, PVC resin, and it is applied to alkyd modified coatings, gilding material coatings (adhesive layer), metal coatings, and more. BM9A has a molecular weight of 130,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.49 to 0.52. view less | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...view more Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. view less | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...view more CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. view less | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...view more Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. view less | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...view more Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. view less | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...view more Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. view less | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...view more Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. view less | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...view more Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. view less | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...view more Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. view less | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...view more Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. view less | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...view more Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. view less | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...view more Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. view less | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...view more Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. view less | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...view more Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. view less | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...view more Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. view less | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...view more Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. view less | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...view more Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. view less | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...view more Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. view less | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...view more Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. view less | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...view more Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. view less | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...view more Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. view less | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...view more Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. view less | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...view more Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. view less | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...view more Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. view less | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...view more Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. view less | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...view more Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. view less | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...view more Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...view more Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...view more Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...view more Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. view less | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...view more Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. view less | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...view more Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. view less | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...view more Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. view less | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...view more Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. view less | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...view more Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. view less | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...view more KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. view less | |
| Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...view more Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. view less | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...view more KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. view less | |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...view more MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. view less | |
| MB-18-A | Pioneer Chemicals Co., Ltd. | MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydr...view more MB-18-A, in the form of a bead, is a copolymer of methacrylates that offers admirable performance on plasticizer migration resistance, weather-ability, alcohol resistance, durability. It is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, esters, and it has admirable compatibility and good solvent release ability with other film forming resins, such as plasticizer, NC, and CAB. MB-18-A is commonly used in PVC inks, toy coatings, and plastic coatings where alcohol resistance is strictly required. It has a molecular weight of 120,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46 to 0.53. view less | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...view more MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. view less | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...view more MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. view less | |
| MB-45 | Pioneer Chemicals Co., Ltd. | MB-45, in the form of a bead, is a copolymer of methyl methacrylate that offers outstanding performance of chemical resistance, flexibility, and cold resistance. It is easily soluble in numerous organic solvents such as chlorinated solvent, ketones, aroma...view more MB-45, in the form of a bead, is a copolymer of methyl methacrylate that offers outstanding performance of chemical resistance, flexibility, and cold resistance. It is easily soluble in numerous organic solvents such as chlorinated solvent, ketones, aromatic hydrocarbons, esters, and it has good compatibility with other film forming resins such as plasticizer, NC, vinyl resin, and chlorinated rubber. MB-45 is mainly used in color string, adhesives, aerosol spray, and more. It has a molecular weight of 160,000 to 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.77 to 0.85. view less | |
| MB-6 | Pioneer Chemicals Co., Ltd. | MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic sol...view more MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic solvents including chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it can solely be dissolved by high alcohols. With good solvent release ability, it also has excellent compatibility with other film forming resins, for instance chlorinated rubber, plasticizer, vinyl resins, and NC. MB-6 is broadly used in screen printing inks, container coatings, marine paints, masonry coatings, general purpose coatings, concrete coatings, external wall coatings, general purpose printing inks, concrete sealants, and road marker paints. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.23 to 0.30. view less | |
| MB-8 | Pioneer Chemicals Co., Ltd. | MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...view more MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. view less | |
| MB-9 | Pioneer Chemicals Co., Ltd. | MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin ...view more MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin with admirable durability, gloss, hardness, and heat resistance for use in adhesives, road marking, construction coatings, road coatings, miscellaneous ink, aerosol lacquers, plastic coating, ceramic coating, metal coatings, printing inks, and wood finishes. It has a molecular weight of 200,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.53 to 0.59. view less | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product i...view more Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product is used as a thickener, protective colloid, binder, stabilizer, and suspending agent, particularly in applications where a nonionic material is desired. view less | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ HE 10K | Ashland | Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and ex...view more Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and excellent package stability as well as offering less sensitivity to pH, surfactants, and other paint additives. view less | |
| Natrosol™ HE 3KB | Ashland | Natrosol™ HE 3KB modified hydroxyethylcellulose (HEC) is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It exhibits excellent enzyme resistance. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the pain...view more Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the paint manufacturer to add HEC in a dry form at any point of the paint production process without lumping. view less | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...view more Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. view less | |
| Natrosol™ Plus 330 PA 5075 | Ashland | Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosit...view more Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosity, therefore better film build, improved levelling with good sag resistance, and excellent storage stability. view less | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...view more Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. view less | |
| PChem® BM-97 | Pioneer Chemicals Co., Ltd. | PChem® BM-97, in the form of a powder, is a copolymer of methacrylates that offers good performance on weather-ability, alcohol resistance, and durability and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and ester...view more PChem® BM-97, in the form of a powder, is a copolymer of methacrylates that offers good performance on weather-ability, alcohol resistance, and durability and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, and esters. It has decent solvent release ability and good compatibility with other film forming resins, such as plasticizer, NC, CAB, and is generally used in structure adhesives, PVC pipe adhesive, plastic coatings where alcohol resistance is firmly required. PChem® BM-97 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 14 mgKOH/g, and an inherent viscosity of 0.20. view less | |
| PChem® BM11 | Pioneer Chemicals Co., Ltd. | PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...view more PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. view less | |
| PChem® BM111 | Pioneer Chemicals Co., Ltd. | PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be di...view more PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. view less | |
| PChem® BM112A | Pioneer Chemicals Co., Ltd. | PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally ...view more PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally used in applications of aluminum sealer, paper printing, and UV curing technology. PChem® BM112A has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.24. view less | |
| PChem® BM131 | Pioneer Chemicals Co., Ltd. | PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vin...view more PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...view more PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM17 | Pioneer Chemicals Co., Ltd. | PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...view more PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM218 | Pioneer Chemicals Co., Ltd. | PChem® BM218, in the form of a powder, is a copolymer of butyl methacrylate that offers special adhesion to ceramics coatings and aluminum finishes. It is compatible with varied variety of other resins including vinyl, acrylics, polyesters, epoxies, and a...view more PChem® BM218, in the form of a powder, is a copolymer of butyl methacrylate that offers special adhesion to ceramics coatings and aluminum finishes. It is compatible with varied variety of other resins including vinyl, acrylics, polyesters, epoxies, and also dissolves in all major solvents. The general applications are good aluminum finishes, ceramic coatings, aerosol paints, and has a molecular weight of 161,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.55. view less | |
| Pchem® BM24G | Pioneer Chemicals Co., Ltd. | Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging varie...view more Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. view less | |
| PChem® BM260 | Pioneer Chemicals Co., Ltd. | PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is so...view more PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is soluble in chlorinated hydrocarbons, esters, glycol ether acetates, ketones, aromatic, glycol ethers, and is a binder for adhesion of polystyrene and aluminum, and that is good for applications of pigmented lacquer and compatible with alkyd resins. PChem® BM260 has a molecular weight of 24,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 7 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM270 | Pioneer Chemicals Co., Ltd. | PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications,...view more PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications, and is generally used in applications of cover PVC substrates, pigment dispersion, hot process stamping, and more. PChem® BM270 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 124 mgKOH/g, and an inherent viscosity of 0.31. view less | |
| PChem® BM44 | Pioneer Chemicals Co., Ltd. | PChem® BM44, in the form of a pellet, is a thermoplastic solid acrylic resin with good flexibility, weather-ability, unique hardness, and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, long-chain fatty alcohol, and ...view more PChem® BM44, in the form of a pellet, is a thermoplastic solid acrylic resin with good flexibility, weather-ability, unique hardness, and is easily soluble in numerous organic solvents such as aromatic hydrocarbons, ketones, long-chain fatty alcohol, and esters. It has good compatibility with other film forming resins such as vinyl resin, epoxy resin, cellulose, and other acrylic resin. BM44 can enhance the phase’s pigment dispersion, stability, and dryness for PVDF resin, thanks to the great compatibility with PVDF resin and is widely used in baking-type fluorocarbon coatings (PVDF coatings) and top layer of printable films, because of its good presentation of adhesion on metal substrates (especially at post-baking process). It has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.40. view less | |
| PChem® BM51 | Pioneer Chemicals Co., Ltd. | PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, a...view more PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is compatible with a wide selection of other resins including polyesters, acrylics, vinyl, and is applicable in coatings and inks with alcohol resistance. PChem® BM51 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.24. view less | |
| PChem® BM60 | Pioneer Chemicals Co., Ltd. | PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...view more PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. view less | |
| PChem® BM60E | Pioneer Chemicals Co., Ltd. | PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...view more PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. view less |
