| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | |
| AMP® | ANGUS Chemical Company | AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...view more BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. view less | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...view more BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. view less | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...view more BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. view less | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...view more BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. view less | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...view more BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. view less | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...view more BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. view less | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...view more BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. view less | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...view more BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. view less | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...view more BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. view less | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...view more BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. view less | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...view more BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. view less | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...view more BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. view less | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...view more BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. view less | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...view more BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. view less | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...view more BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. view less | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...view more BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. view less | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...view more BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. view less | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...view more BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. view less | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...view more BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. view less | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...view more BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. view less | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...view more BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. view less | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...view more BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. view less | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...view more BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. view less | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...view more BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...view more BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...view more BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. view less | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...view more BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...view more BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...view more BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...view more BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...view more BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...view more BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. view less | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...view more BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. view less | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...view more BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...view more BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. view less | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...view more BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. view less | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...view more BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. view less | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...view more BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. view less | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...view more BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. view less | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| NIKANE® MS 3000 | ANGUS Chemical Company | NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent...view more NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent that has been designed for use with a wide variety of other solvents, it is of particular value in formulations as a replacement for a portion of active solvents such as methyl isobutyl ketone (MIBK) or acetates (n-butyl acetate, etc.). view less | |
| NIKANE® MS 5000 | ANGUS Chemical Company | NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirab...view more NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirable, if not essential, in many applications. view less | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less |
