| Blendex B1 | Ichemco | Blendex B1 is a liquid blend of synthetic polymers and natural resins. This product has a viscosity at 3500-8000 cPa. Blendex B1 is most commonly used in solvent adhesive production applications. | |
| BCP | BIP (Oldbury) Ltd | BCP is a blend of waterbased synthetic polymers. Primarily used as a coating on fabric to prevent wrinkles. It can be used in conjunction with PT 939C or A 135 and can be used for single pass systems. | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...view more Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. view less | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers...view more Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. view less | |
| Release W20 HS4 | Ichemco | Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous subs...view more Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous substrate applications. view less | |
| Release W20 S | Ichemco | Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrat...view more Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrate applications. view less | |
| Release W 40 S | Ichemco | Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous subst...view more Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 6 | Ichemco | Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in poro...view more Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 45 GB 1 | Ichemco | Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in p...view more Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 30 HS4 | Ichemco | Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most ...view more Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 5 | Ichemco | Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most common...view more Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 8 | Ichemco | Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commo...view more Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HS 4 | Ichemco | Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used ...view more Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| METOLAT® 390 | Munzing Chemie | METOLAT® 390 is a yellow liquid wetting agent and dispersant that is a solution of modified polymers based on synthetic and natural raw materials, anionics and is partially neutralized with ammonia. It is designed for organic pigments, aqueous coating sys...view more METOLAT® 390 is a yellow liquid wetting agent and dispersant that is a solution of modified polymers based on synthetic and natural raw materials, anionics and is partially neutralized with ammonia. It is designed for organic pigments, aqueous coating systems, and resin-free pigment concentrates. view less | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers...view more Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. view less | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers...view more Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. view less | |
| NACORR® 4426 | King Industries, Inc. | NACORR® 4426 is an emulsifiable corrosion inhibiting additive that gives rust and corrosion prevention in waterborne emulsion coatings. It is a proprietary preparation of a synthetic sodium dinonylnaphthalenesulfonate and polymers. It appears as a light b...view more NACORR® 4426 is an emulsifiable corrosion inhibiting additive that gives rust and corrosion prevention in waterborne emulsion coatings. It is a proprietary preparation of a synthetic sodium dinonylnaphthalenesulfonate and polymers. It appears as a light brown viscous liquid, and offers humidity resistance and stability. This product is really effective in low solids water-based systems and also emulsion based protective coatings. view less | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...view more Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. view less | |
| Polytone AP 131 | Polyols and Polymers | Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to be used in synthetic...view more Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to be used in synthetic natural rubber based compounds. Polytone AP 131 is primarily used in applications that require high hardness in industrial areas to prevent chips and abrasion. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons. view less | |
| Polytone AP 132 | Polyols and Polymers | Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as axs reinforcing resin in synthetic...view more Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as axs reinforcing resin in synthetic and natural rubber based goods that need high hardness along with chip and abrasion resistance when cross linked with a methylene product. Polytone AP 132 is primarily used as a reinforcing additive in rubber adhesives, conveyer belts, apex strips and many more. view less | |
| Indopol® H-7 | INEOS Oligomers | Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-15 | INEOS Oligomers | Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-25 | INEOS Oligomers | Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-50 | INEOS Oligomers | Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-6000 | INEOS Oligomers | Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying...view more Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-18000 | INEOS Oligomers | Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-dryin...view more Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-2 | INEOS Oligomers | Indopol® L-2 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® L-2 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-3 | INEOS Oligomers | Indopol® L-3 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® L-3 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-6 | INEOS Oligomers | Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-8 | INEOS Oligomers | Indopol® L-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® L-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-14 | INEOS Oligomers | Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-100 | INEOS Oligomers | Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-300 | INEOS Oligomers | Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-1200 | INEOS Oligomers | Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-1500 | INEOS Oligomers | Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-1900 | INEOS Oligomers | Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-2100 | INEOS Oligomers | Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Polytone AP 130 | Polyols and Polymers | Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to give reliable performance as a reinforcing resin in synthetic...view more Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to give reliable performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, chip and abrasion resistance when cross-linked with methylene. Polytone AP 130 is primarily used as a reinforcing resin as a lining in several different rubber products and as an additive in rubber adhesives. It is soluble in ester, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. view less | |
| Polytone AP 133 | Polyols and Polymers | Polytone AP 133 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as a reinforcing resin in synthetic...view more Polytone AP 133 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as a reinforcing resin in synthetic and natural rubber based goods that need high hardness along with chip and abrasion resistance when cross linked with a methylene product. Polytone AP 133 is primarily used as a reinforcing additive in rubber adhesives, conveyer belts, apex strips and many more. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. view less | |
| Millionate® MT | Tosoh Corporation | Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and art...view more Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Millionate® MT-F | Tosoh Corporation | Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and a...view more Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Blendex Seal DH 70 | Ichemco | Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat s...view more Blendex Seal DH 70 is a water-based, heat sealable adhesive based on modified acrylic polymers. This product has a total solids content of 23-25% and a Brookfield viscosity at 25°C of 8000-16,000 mPa.s. Blendex Seal DH 70 is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| Blendex Seal DH 76 | Ichemco | Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly us...view more Blendex Seal DH 76 is a water-based, heat sealable adhesive, formulated with modified acrylic co-polymers.. This product has a total solids content of 37.5-39.5% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Blendex Seal DH 76 is most commonly used as a heat sealable elastic adhesive in woven, non-woven, leather, foam, and synthetic leather applications. view less | |
| SETATHANE® D 1145 | Allnex | SETATHANE® D 1145 is a branched, castor oil-based polyol used In the formulation of hard and tough coatings and synthetic resin mortars. | Request Sample |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release KB 100 | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating ap...view more Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release KB 100 A | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non c...view more Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release K 100 DF | Ichemco | Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and...view more Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release K 100 ES | Ichemco | Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating a...view more Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 H | Ichemco | Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating ap...view more Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 D | Ichemco | Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating ...view more Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 DI | Ichemco | Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coatin...view more Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| SLICKO 1000 | PCI Group, Inc. | SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or v...view more SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or volume, to eliminate fish-eye and enhance gloss and scratch/mar resistance. It is not reactive and is effective in all solvent based enamels, lacquers and synthetic paints, including catalyzed systems such as urethanes. view less | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...view more Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| SETATHANE® D E 2767 | Allnex | SETATHANE® D E 2767 is a Polyol emulsion used in combination with aromatic polyisocyanates based on diphenylmethane diisocynate as binder for solvent-free two component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic...view more SETATHANE® D E 2767 is a Polyol emulsion used in combination with aromatic polyisocyanates based on diphenylmethane diisocynate as binder for solvent-free two component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. view less | Request Sample |
| Sodium Allyl Sulfonate 35% | McGean-Rohco, Inc. | Sodium Allyl Sulfonate 35% is used as a brightener for nickel electroplating, as a dyesite monomer in acrylic fiber, and as a performance monomer in synthetic polymer applications. | |
| Ulfcar® Polem A1145 | Nivapol | Ulfcar® Polem A1145 is a solvent free liquid that is mainly used in the formulation of hard and tough-elastic coatings and synthetic resin mortars. This product can be thinned with esters, ketones, ether esters and aromatic hydrocarbons. The tough coating...view more Ulfcar® Polem A1145 is a solvent free liquid that is mainly used in the formulation of hard and tough-elastic coatings and synthetic resin mortars. This product can be thinned with esters, ketones, ether esters and aromatic hydrocarbons. The tough coatings that Ulfcar® Polem A1145 produces are best applied to concrete, asphalt floors, and steel surfaces. view less | |
| PAT-ADD AF 43 | Patcham LTD | PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties ve...view more PAT-ADD AF 43 is a polymeric defoamer for waterborne varnishes, wood-coatings, inks and pigment dispersions. It is low VOC and based on synthetic organic surface active compounds. It is specially formulated for low PVC systems; improved film properties versus oil and silicone defoamers. Main benefits are: oil- and siloxane free for excellent film properties, excellent de-aeration and defoaming properties, excellent alkali- and acid resistance, contributes to substrate wetting, low-VOC, and shear resistant for high shear conditions. view less | |
| MIT-20 | Dalian Bio-Chem Co., Ltd. | MIT-20 is an anti-microbial that comes in a yellowish transparent liquid. This product has a density of greater than or equal to 1.02 g/ml. It is used in paints and synthetic polymer emulsions. | |
| DESMODUR® DA-L | Covestro | A hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, emulsifiable in aqueous polymer dispersions. It can be used as a crosslinking agent for largely pH-neutral aqueous polymer dispersions, such as polyurethane, polyvinylacetate, polyacrylate and synthetic...view more A hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, emulsifiable in aqueous polymer dispersions. It can be used as a crosslinking agent for largely pH-neutral aqueous polymer dispersions, such as polyurethane, polyvinylacetate, polyacrylate and synthetic rubber dispersions. Crosslinking raises the resistance of the bonds to heat, water, plasticizers and numerous solvents. view less | |
| Proxel™ BD Preservative | Arxada | Proxel™ BD Preservative is a broad spectrum industrial preservative for use in aqueous systems, such as paints, synthetic polymer emulsions and thickeners. Its neutral pH helps avoid electrolyte shock. | |
| MIT-50 | Dalian Bio-Chem Co., Ltd. | MIT-50 is an anti-microbial that comes in a colorless or yellow transparent liquid. This product has a density of greater than or equal to 1.1 g/ml. It is used in paints and synthetic polymer emulsions. | |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...view more PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. view less | Request Sample |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| Resipur® 9805 | Omnova Solutions | Resipur® 9805 is a transparent yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin with medium reactivity. This product's delivery form is approximately 65% of a polymer diluted in styrene. It is recommended for synthetic marble...view more Resipur® 9805 is a transparent yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin with medium reactivity. This product's delivery form is approximately 65% of a polymer diluted in styrene. It is recommended for synthetic marble by block process. view less | |
| Resipur® 9806 | Omnova Solutions | Resipur® 9805 is a transparent yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin with medium reactivity. This product's delivery form is approximately 65% of a polymer diluted in styrene. It is recommended for synthetic marble...view more Resipur® 9805 is a transparent yellowish liquid, free of impurities, orthophtalic unsaturated polyester resin with medium reactivity. This product's delivery form is approximately 65% of a polymer diluted in styrene. It is recommended for synthetic marble by block process. view less | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| SCHWEGO® Pur 8020 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Pur 8020 is a rheological additive for water-based coating systems. This milky white liquid is VOC-free and suitable for interior and exterior wall paints as well as for synthetic resin renderings and trowelling compounds or paste fillers based o...view more SCHWEGO® Pur 8020 is a rheological additive for water-based coating systems. This milky white liquid is VOC-free and suitable for interior and exterior wall paints as well as for synthetic resin renderings and trowelling compounds or paste fillers based on polyacrylics, styrene copolymers, PU dispersions or water thinnable alkyd systems. The high gloss retention is shown to particular advantage in glossy emulsion paints when compared with acrylic or cellulose based thickening agents. view less | |
| S.L. 6103 | Ichemco | S.L. 6103 is a water-based emulsion of light molecular weight acrylic polymer. This product has a total solids content of 27.5-28.5%. S.L. 6103 is most commonly used as a thickening agent in water-based natural or synthetic latex coating applications. | |
| CERAFLOUR® 967 | BYK | CERAFLOUR® 967 is a structure additive for powder coatings. This white powder is composed of a synthetic polymer. This product is used for coarse surface texturing of powder coatings. By adding metallic pigments, uniform hammer tone or antique finishes ca...view more CERAFLOUR® 967 is a structure additive for powder coatings. This white powder is composed of a synthetic polymer. This product is used for coarse surface texturing of powder coatings. By adding metallic pigments, uniform hammer tone or antique finishes can be achieved. It is distinguished by the following properties: homogeneous and reproducible surface structure effects, is a very compatible polymer for powder coatings, provides excellent separation of metallic pigments in hammer tone and antique powder coatings. view less | |
| Release HT 100 | Ichemco | Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating...view more Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Tackifier 68 | Ichemco | Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive properties in acrylic, SBR, and synthetic...view more Tackifier 68 is a solvent-free, waterborne dispersion of a stabilized rosin ester. This product has a total solids content of 52-54% and a Brookfield viscosity at 25°C of 200-600 cPs. Tackifier 68 is most commonly used to enhance pressure sensitive properties in acrylic, SBR, and synthetic water-based polymer adhesive applications. view less | |
| Texipol® 63-513 | Scott Bader | Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as t...view more Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer. Texipol® 63-513 shows broad pH compatibility. view less | |
| Blendex Seal DH 8 | Ichemco | Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic...view more Blendex Seal DH 8 is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 52-54%, and a Brookfield viscosity at 25°C of 2000-5000 mPa.s. Blendex Seal DH 8 is most commonly used as a heat sealable adhesive in fabric, leather, foam, non-woven, and synthetic leather applications. view less | |
| DESMODUR® DN | Covestro | A solvent-free liquid polyisocyanate that is emulsifiable in water. Can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking in...view more A solvent-free liquid polyisocyanate that is emulsifiable in water. Can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking increases the resistance of the bonds to heat, water, plasticisers and many solvents. Compared with Desmodur DA, Desmodur DN is characterised by its much lower viscosity and is not prone to turbidity at low storage temperatures. view less | |
| Blendex Seal DH 8 M | Ichemco | Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic...view more Blendex Seal DH 8 M is a water-based, heat sealable adhesive based on a modified acrylic polymer. This product has a total solids content of 46-50% and a Brookfield viscosity at 25°C of 3000-6500 mPa.s. Blendex Seal DH 8 M is most commonly used as a heat sealable adhesive in fabric, non-woven, leather, foam, and synthetic leather applications. view less | |
| VINNAPAS® EZ 3010 | Wacker Chemie AG | VINNAPAS® EZ 3010 is an aqueous Polymer dispersion based on vinyl acetate and ethylene. It is produced without the addition of any plasticizers or solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. VINNAPAS® EZ 3010 (CGN) is a most suitable binder for interior paints as well as for synthetic...view more VINNAPAS® EZ 3010 is an aqueous Polymer dispersion based on vinyl acetate and ethylene. It is produced without the addition of any plasticizers or solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. VINNAPAS® EZ 3010 (CGN) is a most suitable binder for interior paints as well as for synthetic resin bound interior plasters. It can be applied in emulsion paints, interior paints and intumescent coatings. view less | |
| Flex-Rez™ 1084 AS C | Lawter | Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent release and offers great potential in the creation of high performance inks for various synthetic...view more Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent release and offers great potential in the creation of high performance inks for various synthetic polymer substrates. The product is used in flexographic and gravure inks and overprint varnishes. view less | |
| BEETLE® PT336 - Cross Linker in Paper Coatings | BIP (Oldbury) Ltd | PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders...view more PT336 is a methylated melamine formaldehyde resin which is highly reactive and used to cross-link starch, protein and synthetic polymer binder systems. PT336 is used in pigmented paper coatings to cross-link and absorb water soluble binders and co-binders such as starch, CMC etc., thereby improving both wet and dry print properties of the final coated paper. PT336 will also increase the efficiency of the OBA used, particularly in all latex formulations. view less | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic...view more Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. view less | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...view more Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. view less |
