| Aminol® CM Flakes | Innospec Performance Chemicals |
|
Aminol® CM Flakes is a superamide for use in personal care products, such as shampoos, bubble baths and liquid hand soaps. Aminol® CM Flakes is used as a foam booster and stabilizer, lime soap dispersant, thickener and viscosity builder and gelling agent....view more
Aminol® CM Flakes is a superamide for use in personal care products, such as shampoos, bubble baths and liquid hand soaps. Aminol® CM Flakes is used as a foam booster and stabilizer, lime soap dispersant, thickener and viscosity builder and gelling agent. It also has good detergency and enhances wetting properties when used in combination with other surface active agents. view less
Compliance Highlights Available
|
Request Sample |
| EMPILAN® 2502 | Innospec Performance Chemicals |
EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as l...view more
EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation. view less
Compliance Highlights Unavailable
|
Request Sample | |
| EMPILAN® 2502 / MB | Innospec Performance Chemicals |
EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This pr...view more
EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.
This makes it an ideal co-surfactant for laundry products (liquid and powder) and other detergent products such as dish-wash liquids. view less
Compliance Highlights Unavailable
|
Request Sample | |
| EMPILAN® CIS | Innospec Performance Chemicals |
|
EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the vis...view more
EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the viscosity of liquid formulations. EMPILAN® CIS is mostly used in personal care formulations such as shampoos, bath products, shower gels and hand soaps but it can be present in liquid detergents. It may also act as solubiliser for perfumes and essential oils. view less
Compliance Highlights Unavailable
|
Request Sample |
| EMPILAN® CME/T | Innospec Performance Chemicals |
|
EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard ...view more
EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution or emulsification of oils and other hydrophobic ingredients in formulations as well as helping to remove greasy soils in cleaning applications. view less
Compliance Highlights Unavailable
|
Request Sample |
| EMPILAN® KI 6 | Innospec Performance Chemicals |
|
EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively...view more
EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range. view less
Compliance Highlights Unavailable
|
Request Sample |
| EMPILAN® MAA/SI | Innospec Performance Chemicals |
|
EMPILAN® MAA / SI is an excellent co-surfactant for cosmetic applications, capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution...view more
EMPILAN® MAA / SI is an excellent co-surfactant for cosmetic applications, capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution or emulsification of oils and other hydrophobic ingredients. view less
Compliance Highlights Unavailable
|
Request Sample |
| Pureact SCG | Innospec Performance Chemicals |
|
Pureact SCG is a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. ...view more
Pureact SCG is a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant. Pureact SCG MB, a RSPO mass balanced version, is available upon request. view less
Compliance Highlights Unavailable
|
Request Sample |
| Pureact SCG MB | Innospec Performance Chemicals |
|
Pureact SCG MB is a RSPO mass balanced version of Pureact SCG, a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also ...view more
Pureact SCG MB is a RSPO mass balanced version of Pureact SCG, a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant. view less
Compliance Highlights Unavailable
|
Request Sample |
| TroyCare™ BD55 | Arxada – Troy Corporation |
|
TroyCare™ BD55 is a highly effective, water soluble antibacterial preservative. TroyCare™ BD55 is specifically engineered for use in Personal Care Products and Cosmetic formulations to provide protection across a wide range of pH and temperature. TroyCare...view more
TroyCare™ BD55 is a highly effective, water soluble antibacterial preservative. TroyCare™ BD55 is specifically engineered for use in Personal Care Products and Cosmetic formulations to provide protection across a wide range of pH and temperature. TroyCare™ BD55 is globally approved and has a long history of safe use across the entire range of rinse-off and leave-on personal care formulations. view less
Compliance Highlights Available
|
|
| TroyCare™ FP06 | Arxada – Troy Corporation |
|
TroyCare™ FP06 is a clear liquid, broad-spectrum IPBC (iodopropynyl butylcarbamate) antifungal preservative for use in Personal Care and Cosmetic formulations. This unique technology developed by Troy delivers superior efficacy against mold and yeast. Tro...view more
TroyCare™ FP06 is a clear liquid, broad-spectrum IPBC (iodopropynyl butylcarbamate) antifungal preservative for use in Personal Care and Cosmetic formulations. This unique technology developed by Troy delivers superior efficacy against mold and yeast. TroyCare™ FP06 is 100% water-soluble and exhibits excellent pH and temperature stability in the ranges typically encountered in these applications. view less
Compliance Highlights Available
|
|
| TroyCare™ FP99 | Arxada – Troy Corporation |
|
TroyCare™ FP99 is 99% active 3-Iodo-2-Propynyl Butyl Carbamate (IPBC) powder. IPBC is a versatile and cost-effective preservative that provides a high level of antifungal activity. It is remarkably effective in inhibiting the growth of yeasts and molds. F...view more
TroyCare™ FP99 is 99% active 3-Iodo-2-Propynyl Butyl Carbamate (IPBC) powder. IPBC is a versatile and cost-effective preservative that provides a high level of antifungal activity. It is remarkably effective in inhibiting the growth of yeasts and molds. Functional at low concentration, IPBC is fully compatible with surfactants, emulsifiers and proteins, and is stable over wide pH and temperature ranges. view less
Compliance Highlights Available
|
|
| TroyGuard™ B10S | Arxada – Troy Corporation |
|
TroyGuard™ B10S is a non-skin sensitizing BIT (Benzisothiazolinone) preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. TroyGuard™ B10S is useful in a wide range of waterborne HI&H (Household, Industrial & Ins...view more
TroyGuard™ B10S is a non-skin sensitizing BIT (Benzisothiazolinone) preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. TroyGuard™ B10S is useful in a wide range of waterborne HI&H (Household, Industrial & Institutional) products, including cleaners detergents, stain sticks and hard surface cleaners. view less
Compliance Highlights Available
|
|
| TroyGuard™ B20G | Arxada – Troy Corporation |
|
TroyGuard™ B20G is an effective liquid Microbiostat preservative designed to inhibit the growth of microorganisms such as bacteria and fungi in aqueous product formulations, and is widely used in the preservation of household products. It is a clear solut...view more
TroyGuard™ B20G is an effective liquid Microbiostat preservative designed to inhibit the growth of microorganisms such as bacteria and fungi in aqueous product formulations, and is widely used in the preservation of household products. It is a clear solution of 1,2-benzisothiazolin-3-one. TroyGuard™ B20G is a formaldehyde-free preservative, and does not contain any halogens. view less
Compliance Highlights Available
|
|
| TroyGuard™ B20W | Arxada – Troy Corporation |
|
TroyGuard™ B20W is an aqueous dispersion product that controls growth of bacteria and fungi in aqueous systems. TroyGuard™ B20W is a highly concentrated, formaldehyde-free, VOC-free antimicrobial preservative for home care cleaning products and laundry ad...view more
TroyGuard™ B20W is an aqueous dispersion product that controls growth of bacteria and fungi in aqueous systems. TroyGuard™ B20W is a highly concentrated, formaldehyde-free, VOC-free antimicrobial preservative for home care cleaning products and laundry additives. view less
Compliance Highlights Available
|
|
| TroyGuard™ BC11 | Arxada – Troy Corporation |
|
TroyGuard™ BC11 is an aqueous preservative used to control growth of bacteria in aqueous systems. TroyGuard™ BC11 is a free-flowing, VOC-free, and formaldehyde-free dispersion product. TroyGuard™ BC11 was designed specifically for the protection of aqueou...view more
TroyGuard™ BC11 is an aqueous preservative used to control growth of bacteria in aqueous systems. TroyGuard™ BC11 is a free-flowing, VOC-free, and formaldehyde-free dispersion product. TroyGuard™ BC11 was designed specifically for the protection of aqueous systems where contamination is unpredictable, and the use of formaldehyde is prohibited. view less
Compliance Highlights Unavailable
|
