| Flexidone™ 100 | Ashland Specialty Ingredients | Flexidone™ is N-Octyl-2-Pyrrolidone. It excels as an additive, particularly in highly filled applications where even modest addition rates deliver significant gains in quality, performance and processing efficiencies. | |
| Flexidone™ 300 | Ashland Specialty Ingredients | Flexidone™ 300 is N-Dodecyl-2-Pyrrolidone. Flexidone™ 300 balances critical performance characteristics, making it suitable for a broad range of applications. Flexidone 300 provides custom performance characteristics with 30–40% less plasticizer, all whil...view more Flexidone™ 300 is N-Dodecyl-2-Pyrrolidone. Flexidone™ 300 balances critical performance characteristics, making it suitable for a broad range of applications. Flexidone 300 provides custom performance characteristics with 30–40% less plasticizer, all while lowering processing temperatures significantly. view less | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. view less | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...view more A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. view less | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...view more Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. view less | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...view more Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. view less | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...view more Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. view less | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...view more Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. view less | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...view more Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...view more Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. view less | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. view less | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. view less | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. view less | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. view less | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...view more Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. view less | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...view more Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...view more Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...view more Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...view more Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. view less | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...view more Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. view less | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...view more Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. view less | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...view more Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. view less | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...view more Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. view less | |
| Gafquat® 734 | Ashland Specialty Ingredients | Gafquat® 734 is a quaternized VP/DMAEMA methacrylate copolymer in ethanol SDA-40B. It produces transparent, glossy, tack free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactan...view more Gafquat® 734 is a quaternized VP/DMAEMA methacrylate copolymer in ethanol SDA-40B. It produces transparent, glossy, tack free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactants. view less | |
| Gafquat® 755 | Ashland Specialty Ingredients | Gafquat® 755 is a quaternized VP/DMAEMA methacrylate copolymer in ethanol SDA-40B. It produces transparent, glossy, tack free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactan...view more Gafquat® 755 is a quaternized VP/DMAEMA methacrylate copolymer in ethanol SDA-40B. It produces transparent, glossy, tack free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactants. view less | |
| Gafquat® 755N | Ashland Specialty Ingredients | Gafquat® 755N is quaternized with diethylsulfate producing this product which gives transparent, glossy, tack free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactants. | |
| Gafquat® HS-100 | Ashland Specialty Ingredients | Gafquat® HS-100 is vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride copolymer giving it a transparent, glossy, tack free, flexible film. Presence of the amide linkage in the MAPTAC moiety imparts greater hydrolysis resistance. | |
| Gantrez™ AN-119 | Ashland Specialty Ingredients | Gantrez™ AN-119 is a copolymer of methyl vinyl ether/maleic anhydride. product attributes are physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 15(5%)/35(10%), nominal Molecular Weight 2.0x105, Tg Deg C 152, and specifi...view more Gantrez™ AN-119 is a copolymer of methyl vinyl ether/maleic anhydride. product attributes are physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 15(5%)/35(10%), nominal Molecular Weight 2.0x105, Tg Deg C 152, and specific gravity 22-25 Deg C 1.018(5%). view less | |
| Gantrez™ AN-139 | Ashland Specialty Ingredients | Gantrez™ AN-139 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 40(5%)/145(10%), nominal molecular weight 1.0x106, Tg Deg C 151, specif...view more Gantrez™ AN-139 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 40(5%)/145(10%), nominal molecular weight 1.0x106, Tg Deg C 151, specific gravity 22-25 Deg C 1.016(5%). view less | |
| Gantrez™ AN-149 | Ashland Specialty Ingredients | Gantrez™ AN-149 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 45(5%), nominal molecular weight 1.25x106, Tg Deg C 153, specific gravi...view more Gantrez™ AN-149 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 45(5%), nominal molecular weight 1.25x106, Tg Deg C 153, specific gravity 22-25 Deg C 1.017(5%), and acid #=695. view less | |
| Gantrez™ AN-169 | Ashland Specialty Ingredients | Gantrez™ AN-169 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 85(5%), nominal molecular weight 1.98x106, Tg Deg C 154, specific gravi...view more Gantrez™ AN-169 is a copolymer of methyl vinyl ether/maleic anhydride. Product attributes include, physical state as supplied white powder, CAS No 9011-16-9, viscosity cps at 25 Deg C 85(5%), nominal molecular weight 1.98x106, Tg Deg C 154, specific gravity 22-25 Deg C 1.017(5%), and acid #=695. view less | |
| PVP K-120 | Ashland Specialty Ingredients | PVP K-120 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. Applications include use as a metal quenchant bath. | |
| PVP K-15 | Ashland Specialty Ingredients | PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-30 | Ashland Specialty Ingredients | PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| PVP K-60 | Ashland Specialty Ingredients | PVP K-60 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. | |
| PVP K-90 | Ashland Specialty Ingredients | PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...view more PVP K-90 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. view less | |
| Rapi-Cure™ DVB1D | Ashland Specialty Ingredients | Rapi-Cure™ DVB1D is a butanediol divinyl ether. Applications include reactive diluents for cationic, charge transfer and free radical radiation curable coatings, co-monomers in specialty coating manufacture, effective in generating low surface energy rele...view more Rapi-Cure™ DVB1D is a butanediol divinyl ether. Applications include reactive diluents for cationic, charge transfer and free radical radiation curable coatings, co-monomers in specialty coating manufacture, effective in generating low surface energy release coatings, monomers for tackifying adhesives with varying properties. view less | |
| Rapi-Cure™ DVE-3 | Ashland Specialty Ingredients | Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C...view more Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C 119, specific gravity 22-25 Deg C 1.001. view less | |
| Rapi-Cure™ HBVE | Ashland Specialty Ingredients | Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg ...view more Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg C -39, flash pt deg C 82, specific gravity 22-25 Deg C 0.939. view less | |
| Stabileze™ QM | Ashland Specialty Ingredients | Stabileze™ QM rheology modifier is a non-acrylic thickener based on Ashland’s well established methylvinylether/maleic anhydride chemistry. It is easy to disperse, effective at low use levels and provides good shear and temperature stability. Stabileze™ Q...view more Stabileze™ QM rheology modifier is a non-acrylic thickener based on Ashland’s well established methylvinylether/maleic anhydride chemistry. It is easy to disperse, effective at low use levels and provides good shear and temperature stability. Stabileze™ QM rheology modifier has a small particle size, disperses quicker and is more rapidly converted to a gel. This difference is especially beneficial, since it allows incorporation of the thickener into cold mix systems. Stabileze rheology modifier is compatible with a wide range of surfactants and polymers and may be used to thicken both aqueous and non-aqueous systems. Heat accelerates the dispersion of Stabileze rheology modifier in water after neutralization. view less | |
| Surfadone™ LP-100 wetting agent | Ashland Specialty Ingredients | Surfadone™ LP-100 wetting agent (N-Octyl-2-Pyrrolidone) is a low-foaming, nonionic rapid wetting agent with an HLB of 6 and having no critical micelle concentration (CMC). Due to the electron delocalized lactam ring, Surfadone™ LP-100 wetting agent intera...view more Surfadone™ LP-100 wetting agent (N-Octyl-2-Pyrrolidone) is a low-foaming, nonionic rapid wetting agent with an HLB of 6 and having no critical micelle concentration (CMC). Due to the electron delocalized lactam ring, Surfadone™ LP-100 wetting agent interacts with anionic surfactant micelles. This greatly enhances its water solubility, resulting in a synergistic surface tension reduction and wetting enhancement at low concentrations. view less | |
| Surfadone™ LP-300 wetting agent | Ashland Specialty Ingredients | Surfadone™ LP-300 wetting agent (N-Dodecyl-2-Pyrrolidone) is sparingly soluble in water (0.002 weight percent) and soluble in most organic solvents. It is a low-foaming, nonionic surfactant with an HLB of 3 and has no critical micelle concentration (CMC)....view more Surfadone™ LP-300 wetting agent (N-Dodecyl-2-Pyrrolidone) is sparingly soluble in water (0.002 weight percent) and soluble in most organic solvents. It is a low-foaming, nonionic surfactant with an HLB of 3 and has no critical micelle concentration (CMC). Like its lower homolog, Surfadone™ LP-300 wetting agent interacts with anionic surfactants, forming mixed micelles, which greatly enhances its solubility, resulting in a synergistic surface tension reduction and wetting enhancement. Appropriate combinations of Surfadone™ LP-300 wetting agent and anionic surfactants produce viscous solutions and gels. view less |
