| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...view more 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. view less | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. view less | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...view more A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. view less | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...view more Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. view less | |
| Flytac 104 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used...view more Flytac 104 is a pale, thermoplastic, acidic resin made by hydrogenating rosin. Due to this treatment, it s highly resistant to oxidation, discoloration, and to changes in solubility characteristics when it is exposed to air and sunlight. It is mainly used as raw material for the manufacture of a number of products including bookbinding, caulking, paint and coatings, personal care and cosmetics, pressure sensitive adhesives, rubber and plastic modification, solvent-borne adhesives, tapes and labels, waterborne adhesives, and wax modification. This product has an abietic acid of 2.0% max., a softening point (R&B) of 76°C min., and a dehydroabietic acid of 8.0% max. view less | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...view more Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. view less | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...view more Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. view less | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...view more Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...view more Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. view less | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. view less | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...view more Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. view less | |
| Flytac 114-125 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-125 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. This product offers color stability, is resistant to yellowing, and has good heat resistance and adhesion. Flytac 114-125 has a color (Gardner Grade) of 5 max., an acid value of 30mg KOH/g max., and a softening point (R&B) of 125 ± 2°C min. view less | |
| Flytac 114-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-130 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-130 has a softening point (R&B) of 130 ± 2°C min., an acid value of 30mg KOH/g max., and a color (Gardener Grade) of 5 max. view less | |
| Flytac 114-135 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; impro...view more Flytac 114-135 is a slightly yellow transparent solid, which is adduct of gum rosin and maleic adhydride through the eaterification by glycerol or pentaerythritol. It is used in paint and coating industries widely, for production of phenolic paints; improve hardness of paint films, gloss and rubbing property for Polyesters, Nitro and PU paints. It offers color stability, resistant to yellowing, good heat resistance and adhesion. Flytac 114-135 has an acid value of 30mg KOH/g max., a color (Gardner Grade) of 5 max., and a softening point (R&B) of 135 ± 2°C min. view less | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...view more Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. view less | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...view more Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. view less | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...view more Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...view more Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...view more Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. view less | |
| Flytac 117-115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-115 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-115 has a softening point (R&B) of 110-120°C min., a dissoluble matter in hot water amount of 0.20, and an acid number of 145mg KOH/g min. view less | |
| Flytac 117-140 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-form...view more Flytac 117-140 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-140 has a softening point (R&B) of 135-145°C min., an acid number of 145mg KOH/g min., and a dissoluble matter in alcohol of 0.03% max. view less | |
| Flytac 117-95 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-formi...view more Flytac 117-95 is a polymerized rosin that is processed with the new advanced Sulphuric acid and Chloride Zinc method. It has many excellent properties including high softening point, anti-oxidation, non-crystallizing and good compatibility with film-forming agent. The typical uses for this product include ink, adhesive, paint, varnish, soldering flux, synthetic resin, etc. Flytac 117-95 has an acid number of 150mg KOH/g, a dissoluble matter in alcohol of 0.03% max., and a softening point (R&B) of 90-100°C min. view less | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA...view more Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. view less | |
| Flytac 188-C5/C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw m...view more Flytac 188-C5/C9 is a copolymerization hydrocarbon petroleum resin, whose materials are C5 fraction and C9 fraction. It is a new product for the market, and has the good characters of C5 hydrocarbon resin and C9 hydrocarbon resin. It is an important raw material for the product of paints, adhesives, and in rubber industries. Flytac 188-C5/C9 has an ash content of 0.1% max., an acid value of 0.3mg KOH/g max., and a softening point (B&R) of 90~120°C max. view less | |
| Flytac 188-C9 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300...view more Flytac 188-C9 hydrocarbon petroleum resin is a kind of resin produced by C9 fraction, by products of petroleum cracking, through pretreatment,polymerization and distillation. It isn‘t a high polymer but a low polymer, with the molecular weight between 300-3000. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-C9 has a softening point (B&R) of 90-140°C, an acid value of 0.5mg KOH/g max., and an ash amount of 0.1% max. view less | |
| Flytac 188-HC5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color re...view more Flytac 188-HC5 hydrocarbon resin is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. It is an important raw material for the production of paints, adhesives and rubber industries. Flytac 188-HC5 has a softening point (B&R) of 95-105°Cg, an acid value of 0.5mg KOH/g max., and an ash amount of 0.02% max. view less | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...view more Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. view less | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...view more Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. view less | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...view more Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. view less | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...view more Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...view more Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...view more Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...view more Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...view more Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...view more Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. view less | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...view more Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...view more Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...view more Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...view more Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...view more Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...view more Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...view more Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...view more Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. view less | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...view more Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. view less | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...view more Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. view less | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...view more Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. view less | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...view more Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. view less | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...view more Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. view less |
