| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...view more CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...view more CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...view more CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. view less | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...view more CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...view more CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...view more CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. view less | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...view more CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...view more CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...view more CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...view more CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. view less | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. view less | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. view less | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...view more BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. view less | |
| Terlon™ 1162 A | Lawter | Terlon™ 1162 A is a metal decorating alkyd that has a high viscosity in a light-colored alkyd. Derived from soya oil, its linolenic (yellowing) content is less than that of most soya alkyds. The product improves color retention making it useful in metal d...view more Terlon™ 1162 A is a metal decorating alkyd that has a high viscosity in a light-colored alkyd. Derived from soya oil, its linolenic (yellowing) content is less than that of most soya alkyds. The product improves color retention making it useful in metal decorating inks and offset inks. view less | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Terlon™ 1739 A | Lawter | Terlon™ 1739 A is a specialty alkyd that has a low color development making it ideal for use in metal decorating inks. It also has applications in sheet-fed, heatset and pigment dispersion systems. | |
| Terlon™ 307 A | Lawter | Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or...view more Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or grinding with the product yields more cleanliness and color strength than conventional wetting systems, while still retaining good flow characteristics. Terlon™ 307 A is a good pigment binder on most printable surfaces and is used in applications such as coldset, web heatset, varnishes and metal decorating inks. view less | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Terlon™ 3010 A | Lawter | Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and...view more Terlon™ 3010 A is a grinding and flushing alkyd with a linseed base in an alkyd known for its pigment wetting and fast, hard-drying properties. The product is considered a vital ingredient in many oil-based printing inks. The alkyd's ability to create and maintain color strength with little bronzing while providing leveling and flow, ensure the product is an essential formulating tool. Terlon™ 310 A is compatible with most inks, helping to stabilizing ink formulations that don't hold up on long runs. The applications in which it has uses include sheet-fed offset, heatset offset, coldset offset, metal deco and letterpress. view less | |
| Rexin DS 256/75X | S.A.P.I.C.I. SpA | Rexin DS 256/75X is a short-oil alkyd resin. This product has high hardness, elasticity, good gloss and yellowing resistance. It can be used in clear or pigmented polyurethane coatings and high-quality nitrocellulose enamels. It can also be used in com...view more Rexin DS 256/75X is a short-oil alkyd resin. This product has high hardness, elasticity, good gloss and yellowing resistance. It can be used in clear or pigmented polyurethane coatings and high-quality nitrocellulose enamels. It can also be used in combination with urea and melamine resins to produce stoving enamels. view less | |
| Terlon™ 1114 A | Lawter | Terlon™ 1114 A is a flomet alkyd with an oxidizing-drying fraction from conjugated fatty acids. It gives off a pale color, a cohesive film build and improved dry speed and is ideal for use in metal deco inks. It is also suitable for use in sheet-fed offse...view more Terlon™ 1114 A is a flomet alkyd with an oxidizing-drying fraction from conjugated fatty acids. It gives off a pale color, a cohesive film build and improved dry speed and is ideal for use in metal deco inks. It is also suitable for use in sheet-fed offset, coldset offset and heatset offset applications. view less | |
| WorléeKyd BS 830 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd B...view more WorléeKyd BS 830 (60% In Dearomatized HC 160-200) is an air drying silicone modified alkyd resin for the manufacture of lasting protection coatings for steel construction. This grade has a non-volatile content of 60% ±1. High gloss paints based on W´Kyd BS 830 have good drying and resistance properties and very good gloss retention. view less | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...view more WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. view less | |
| Terlon™ 605 A | Lawter | Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include t...view more Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion. It is ideally suited for use in coldset, web heatset systems and metal decorating inks and varnishes. view less | |
| Terlon™ 603 A | Lawter | Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The prod...view more Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The product has good color retention capabilities, making it ideal for use in heat-induced drying applications. It is suitable for use in coldset, web heatset, metal decorating inks and varnishes. view less | |
| Terlon™ 607 A | Lawter | Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. T...view more Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. The product is able to facilitate tough, flexible ink films and is suitable for use in coldset systems, in web heatset and varnishes as well as in metal decorating inks. view less | |
| Terlon™ 613 A | Lawter | Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oi...view more Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion and transfer as well as tack stability. It is suitable for use in web heatset, varnishes, metal decorating inks and coldset systems. view less | |
| Trionol™ 7 A | Lawter | Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment ...view more Trionol™ 7 A is a specialty alkyd used for boosting ink film integrity. It has good pigment wetting properties and can improve setting speed, gloss and rub resistance. The product can replace drying oils in heatset and quickset systems to improve pigment wetting, solvent tolerance, rub resistance and compatibility without sacrificing setting speed. It is ideally used in coldset, heatset and sheet-fed offsets with applications also in letterpress and metal deco inks. view less | |
| Domalkyd 0545 40 Wa | HELIOS RESINS | Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-base...view more Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance approach as certified by the ISCC PLUS). view less | |
| Trionol™ 3 A | Lawter | Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve c...view more Trionol™ 3 A is an alkyd for enhancing ink film integrity that comes with good pigment wetting properties and has the ability to improve setting speed, gloss and rub resistance. It can replace drying oils in heatset and quickset inks in order to improve compatibility, pigment wetting, rub resistance and solvent tolerance without sacrificing setting speed. The product's viscosity is stable in finished inks. It is ideal for sheet-fed, coldset, heatset, metal deco, silk screen and letterpress applications. view less | |
| CHS-Hydrospol D 101 | Spolchemie | CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for t...view more CHS-Hydrospol D 101 is a milky colored binder for waterborne low yellowing solvent free coatings. This product is 45% water VOC free urethane dispersion alkyd resin that is made from soybean oil. It does not have any organic solvents. The oil length for this product is estimated to be around 27%. CHS-Hydrospol D 101 is primarily used for waterborne air-drying coatings for interior and exterior uses. This product is used on metal and wood surfaces. view less | |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flu...view more Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. view less | |
| WorléeSol E 530 W | Worlée-Chemie G.m.b.H. | WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically a...view more WorléeSol E 530 W is a medium oil modified PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. It is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative drying, a cobalt drier is not necessary in many cases. Varnishes based on W´Sol E 530 W show good wood firing, good water and chemical resistance and high abrasion resistance. This grade has a non volatile content of 30% ± 1. view less | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| CHS-Hydrospol D 01 | Spolchemie | CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is p...view more CHS-Hydrospol D 01 is a milky or cream colored resin with low viscosity. This product is a binder for solvent free waterborne coatings and is made up of 45% water. It is VOC free and a urethane dispersal of linseed oil alkyd resin. CHS-Hydrospol D 01 is primarily used for several different types of water-soluble air-drying coating s for interior and exterior. This product is as a steel anticorrosion primer for metals and stain for woods. view less | |
| Trionol™ 33 A | Lawter | Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a r...view more Trionol™ 33 A is an alkyd for boosting ink film integrity and provides a tough anchor as it partially penetrates and oxidizes when printed on coated paper. The rest of the product sits on the surface as a film-forming coating that quickly hardens into a rub-resistant and tough print. It has good pigment wetting properties, can improve setting speed, rub resistance and gloss unlike other pigment wetting vehicles that lose setting speed and gloss. The product is used in coldset, heatset and sheet-fed offsets, with other applications in silk screen, metal deco and letterpress inks. view less | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...view more Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. view less | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...view more Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. view less | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...view more Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. view less | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...view more Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. view less |
