| ADDITOL® VXW 4926 | Allnex | ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions...view more ADDITOL® VXW 4926 is an antifoaming additive for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins. view less | Request Sample |
| ADDITOL® VXW 5907 | Allnex | ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varie...view more ADDITOL® VXW 5907 is a surface active additive for water dilutable paints, particularly for spray application. In stoving paints, the flash-off time prior to stoving, can be greatly reduced, without causing defects in the cured film. The effectivity varies with the type of the water dilutable paint. view less | Request Sample |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...view more ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. view less | Request Sample |
| ADDITOL® VXW 6393 | Allnex | ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. | Request Sample |
| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| ADDITOL® XW 393 | Allnex | ADDITOL® XW 393 is a antifoam for waterborne paint systems, without silicone addition. | Request Sample |
| AFCONA - 2018 | AFCONA Additives Sdn Bhd | AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing a...view more AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primers, and in NC lacquers for wood. view less | |
| AFCONA - 2020 | AFCONA Additives Sdn Bhd | AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and th...view more AFCONA – 2020 is a silicone-free modified polyvinyl polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, and finds application in solvent-based coatings, printing inks, and thermosetting resin systems. view less | |
| AFCONA - 2021 | AFCONA Additives Sdn Bhd | AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coat...view more AFCONA – 2021 is a silicone-free polymer in a xylene solvent. This clear to slightly yellow liquid functions as a defoaming agent that prevents the entrapment of air during processing steps. AFCONA – 2021 finds application in non-acrylic polyurethane coatings for wood, acid curing coatings for wood, air drying alkyd decorative paints and protective coatings, stoving systems for industrial uses, and in NC lacquers for wood and car refinishes. view less | |
| AFCONA - 2024 | AFCONA Additives Sdn Bhd | AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based ...view more AFCONA – 2024 is a silicone-free polymer in a SBP spirit and PMA solvent. This slightly yellow, transparent liquid functions as a strong defoamer with levelling performance for all solvent-based coatings. This product is suitable for use in solvent-based coatings, printing inks, and thermosetting resin systems where it eliminates foam and blistering. AFCONA – 2024 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. view less | |
| AFCONA - 2050 | AFCONA Additives Sdn Bhd | AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 20...view more AFCONA – 2050 is a silicone-free polymer in a SBP spirit and PMA solution. This clear to slightly yellow liquid functions as a strong defoamer to prevent foam and blistering, suitable for use in select resin systems and solvent-based coatings. AFCONA – 2050 finds application in nitrocellulose lacquers and acid-cured wood finishes, two-component polyurethane lacquers, cold cured epoxy resin systems, unsaturated polyester systems, baking paint applied by curtain coater and dipping, and in colored and matted systems. view less | |
| AFCONA - 2270 | AFCONA Additives Sdn Bhd | AFCONA – 2270 is a silicone-free polymer appearing as a clear liquid. This product functions as a moderate defoaming agent with fewer side effects which prevents the formation of foam and blisters during manufacture and application. AFCONA – 2270 is compa...view more AFCONA – 2270 is a silicone-free polymer appearing as a clear liquid. This product functions as a moderate defoaming agent with fewer side effects which prevents the formation of foam and blisters during manufacture and application. AFCONA – 2270 is compatible with most resin systems, is recommended for medium viscosity applications, and is suitable for use in ultraviolet curing systems, polyurethane systems for wood, plastic, and car refinishes, in airless spray coatings, in stoving paints for general industrial purposes, in epoxy systems, and in water-based systems. view less | |
| AFCONA - 2290 | AFCONA Additives Sdn Bhd | AFCONA – 2290 is a silicone-free defoaming agent appearing as a clear liquid. This product functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy, polyurethane, UPE, and ultraviolet c...view more AFCONA – 2290 is a silicone-free defoaming agent appearing as a clear liquid. This product functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy, polyurethane, UPE, and ultraviolet coatings, high polar systems such as NC and acid curing, and in primer coatings. view less | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melami...view more AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. view less | |
| AFCONA - 2725 | AFCONA Additives Sdn Bhd | AFCONA – 2725 is a silicone-free polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a defoamer, air-releaser, and levelling for solvent-free epoxy UPE, PMMA, and polyurethane systems. AFCONA – 2725 finds application in floo...view more AFCONA – 2725 is a silicone-free polymer in a SBP spirit solvent. This clear to slightly yellow liquid functions as a defoamer, air-releaser, and levelling for solvent-free epoxy UPE, PMMA, and polyurethane systems. AFCONA – 2725 finds application in floor coatings and pigment paste preparations. view less | |
| AFCONA - 2754 | AFCONA Additives Sdn Bhd | AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar...view more AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar systems used in wood coatings such as NC, polyurethane, and acid curing, and in coil coatings on basic PVC plastisols. view less | |
| BC Antifoam 2226 | Basildon Chemical Company Ltd. | BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100,...view more BC Antifoam 2226 is a clear, colorless, mobile, liquid, antifoam compound concentrate free from silicone polymers. It has good stability properties, and is used in paints, printing inks, and paint resins. This product has a non volatile percentage of 100, and a specific gravity of 1.0. view less | |
| Borchers® AF T | OMG Borchers GmbH | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| BYK®-012 | BYK | BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product i...view more BYK®-012 is a compound of foam-destroying polymers and hydrophobic particles. This product is especially suitable for defoaming emulsion paints and plasters with a PVC-range of 30-85, where it prevents foam during production and application. The product is silicone- and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant and can be used in a pH-range of 3 - 12. The product may lead to turbidity and seeding in clear coats. view less | |
| BYK®-014 | BYK | BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especial...view more BYK®-014 is a mixture of foam-destroying polymers, fat derivatives and hydrophobic particles. This product shows excellent defoaming properties in various emulsion types such as acrylates, styrene acrylics or VAE´s (vinyl acetate ethylene). It is especially suitable for defoaming emulsion paints and plasters with a PVC range of 30-85. The product is silicone-free and mineral oil-free and is specifically recommended for VOC-free systems. The additive shows optimum efficiency at low dosage, is acid and alkaline resistant, and can be used in a pH range of 3 - 12. view less | |
| BYK®-054 | BYK | BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be eval...view more BYK®-054 is especially suited for solvent-free systems like PUR and epoxy floorings. It eliminates air-bubbles and ensures pinhole-free surfaces. Due to its strong incompatibility, the additive‘s influence on the transparency of clear systems must be evaluated. BYK-054 is also suitable to defoam plastisols. view less | |
| BYK®-055 | BYK | BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters wit...view more BYK®-055 is a solution of foam destroying polymers that is silicone free. This product is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. view less | |
| BYK®-057 | BYK | BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters...view more BYK®-057 is a solution of foam destroying polymers, silicone free. It is especially suitable for wood and furniture coatings based on glossy polyesters, paraffin-polyesters and UV-curing polyesters. Even at thin application parameters with curtain coaters, curtain stability is provided. Used in non-pigmented wood coatings, a slight turbidity over dark wood could occur. Good results can also be achieved in epoxies. view less | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK®-1711 | BYK | BYK®-1711 is a mixture of foam destroying polymers and hydrophobic solids that is silicone-free. This product is very effective, even at low dosage levels, and it is easy to incorporate, exhibits excellent storage stability, wide compatibility from UV- to...view more BYK®-1711 is a mixture of foam destroying polymers and hydrophobic solids that is silicone-free. This product is very effective, even at low dosage levels, and it is easy to incorporate, exhibits excellent storage stability, wide compatibility from UV- to 2-pack systems, no seeding in clear coats and is silicone-free and contains no mineral oil. view less | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1770 | BYK | BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented ...view more BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented systems and clear coats. The addition of BYK-1770 has no negative influence on turbidity (transparency) and gloss in high gloss systems. The additive is solvent-free. view less | |
| BYK®-1790 | BYK | BYK®-1790 is a mixture of foam destroying polymers that is silicone free. This product is specially developed for defoaming solvent-free radiation curable systems (UV & EB). BYK-1790 shows excellent defoaming performance in coatings containing commonly us...view more BYK®-1790 is a mixture of foam destroying polymers that is silicone free. This product is specially developed for defoaming solvent-free radiation curable systems (UV & EB). BYK-1790 shows excellent defoaming performance in coatings containing commonly used pigments, extenders and matting agents. view less | |
| BYK®-1794 | BYK | BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems....view more BYK-1794 is an emission-free and silicone-free polymeric defoamer for solvent-borne, solvent-free, and UV systems. The additive is particularly recommended for high-solids and solvent-free systems on the basis of epoxy, PUR, polyaspartics, and UV systems. It is suitable for pigmented and non-pigmented systems, has no effect on surface properties or transparency, and is effective during production and further processing. The additive consists of 100% solids and is solvent-free. BYK-1794 is used in thick layer systems, such as coatings for flooring. BYK-1794 offers excellent compatibility with solvent-free coatings for ballast tanks, tank interiors, etc. It is also highly effective in 100% polyurethane and polyaspartic acid ester systems for pipeline and concrete coatings as well as other solvent-free coating systems for a high degree of corrosion protection. In typical solvent-borne coil coating systems (e.g. polyester melamine or PUR systems), BYK-1794 is very compatible and produces good, spontaneous defoaming effects. Excellent results can be achieved in UV systems for wood and furniture coatings. view less | |
| BYK-3540 | BYK | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | |
| BYK-397 | BYK | BYK-397 is a silicone-and fluorine-free leveling additive for solvent-borne coating systems with excellent defoaming properties. | |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...view more DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. view less | |
| DAPRO® DF 7007 | Elementis | DAPRO® DF 7007 is a chelating catalyst to replace cobalt based dryers in waterborne coatings. | |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...view more Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. view less | |
| Defoamer EDW-707 | HS CHEM CO.,LTD | Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...view more Defoamer EDW-707 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. view less | |
| Defoamer EDW-709 | HS CHEM CO.,LTD | Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex pain...view more Defoamer EDW-709 is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a white liquid and is insoluble in water. It is often used in emulsion paint, latex paint systems, architectural paints, and adhesives. view less | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...view more Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. view less | |
| Drewplus™ T-4202 Foam Control Agent | Ashland | Drewplus™ T-4202 is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...view more Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. view less | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....view more Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. view less | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...view more Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. view less | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and p...view more Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-706 | Dynoadd by Dynea | Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the ...view more Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating. Dynoadd® F-706 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent RadCure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. S...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent ba...view more Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent based coating systems. Small additions may also contribute to improved flow, and reduce surface imperfections such as craters and orange peel. Dynoadd® F-708 has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-708 can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. Dynoadd® F-708 has applications in coil coatings, general industry, packaging coatings, and PVdF coatings. A first trial dose of 0.05% is recommended. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-713 | Dynoadd by Dynea | Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding b...view more Dynoadd® F-713 eliminates air entrapment, pinholes and surface foam in 100% or low VOC formulations. It prevents foaming during manufacture and application. Dynoadd® F-713 is particularly suited for thick films like floor coatings, castings and moulding based on 2K epoxies, unsaturated PE and PUs. Dynoadd® F-713 may reduce film transparency. Dynoadd® F-713 has applications in 2K Epoxy, Unsat. PE, and 1 and 2K PU formulations. view less | Request Sample |
| Dynoadd® F-760 | Dynoadd by Dynea | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...view more Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. view less | Request Sample |
| EFKA® PB 2001 | BASF Formulation Additives | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001...view more EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. view less | |
| EFKA® PB 2010 | BASF Formulation Additives | EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the sub...view more EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the substrate (e.g., wood or metal) or due to the application method (pumping, rolling, flooding or spraying). EFKA® PB 2010 performs well for a wide range of applications and is particularly suitable for clear coatings, without haziness, as well as providing high gloss if required. view less | |
| Efka® SI 2030 | BASF Formulation Additives | Efka® SI 2030 (formerly Efka® 2030) is a defoamer that prevents the entrapment of air during processing steps such as dispersion and pumping. It prevents the formation of foam and blisters during application. Efka® SI 2030 should be incorporated at medium...view more Efka® SI 2030 (formerly Efka® 2030) is a defoamer that prevents the entrapment of air during processing steps such as dispersion and pumping. It prevents the formation of foam and blisters during application. Efka® SI 2030 should be incorporated at medium to high shear and has good defoaming activity. In terms of activity it is comparable to Efka® SI 2030. However, due to its carrier solvent it is even more suited for fast-evaporating systems. view less | |
| FOAMASTER® MO 2111 NC | BASF Formulation Additives | FOAMASTER® MO 2111 NC is a defoamer specifically designed for water based paints and coatings, water based printing inks as well as for latex adhesive systems. A defoamer level of 0.5%, based on total ink or adhesive, is a good starting point for determin...view more FOAMASTER® MO 2111 NC is a defoamer specifically designed for water based paints and coatings, water based printing inks as well as for latex adhesive systems. A defoamer level of 0.5%, based on total ink or adhesive, is a good starting point for determining the optimum use level. view less | |
| FoamStar® ST 2441 | BASF Formulation Additives | FoamStar® ST 2441 (formerly FoamStar® A 410) is a defoamer for emulsion paints matt, semi gloss and high gloss, wood coatings including energy curable systems (UV/EB), native compounds in oxo oil. This product is a yellowish to brownish, clear to slightly...view more FoamStar® ST 2441 (formerly FoamStar® A 410) is a defoamer for emulsion paints matt, semi gloss and high gloss, wood coatings including energy curable systems (UV/EB), native compounds in oxo oil. This product is a yellowish to brownish, clear to slightly hazy liquid. view less | |
| LOPON® E 100 | ICL Phosphate Specialty | LOPON® E 100 is a defoamer for glossy paints. It is a VOC-mineral-oil- and silicon-free product. | Request Sample |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Coating Additives | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid. | Request Sample |
| SURFYNOL® 104 A | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| SURFYNOL® 104 BC | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 DPM | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 DPM is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 E | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 H | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PA | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PA is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® 104 PG 50 | Evonik Operations GmbH, BL Coating Additives | Surfynol® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks. | Request Sample |
| Surfynol® AD-01 | Evonik Operations GmbH, BL Coating Additives | Surfynol® AD 01 is multi-functional gemini surfactant combining dynamic wetting and molecular defoaming. Surfynol® AD 01 also acts as a coalescing aid. | Request Sample |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | Request Sample |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Coating Additives | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...view more Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. view less | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...view more Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. view less | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this pr...view more TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C. view less | Request Sample |
| TEGO® Foamex 6 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 6 is an efficient concentrate defoamer for water-based paints with good long-term stability. TEGO® Foamex 6 is silicone- and silica-free. | Request Sample |
| TEGO® Foamex 832 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. T...view more TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. TEGO® Foamex 832 is based on sustainable raw materials, for use in the millbase of pigmented printing inks, and is suitable for contact with foodstuffs. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| TEGO® Foamex 9 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica. | Request Sample |
| WorléeAdd 425 | Worlée-Chemie G.m.b.H. | WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small addit...view more WorléeAdd 425 is a highly efficient silicone free defoamer and antifoam agent for solvent-poor and solvent-less coatings of different composition. W´Add 425 can be used in EP- and PU-systems, in polyester-/amino resin combinations etc..Even at small additional quantities W´Add 425 features a fast foam destroying, so that foam and blister free surfaces can be produced. view less | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...view more WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. view less | |
| WorléeAdd 677 | Worlée-Chemie G.m.b.H. | WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house pai...view more WorléeAdd 677 is a silicone-free and aromatic-free defoamer and anti-foam agent for solvent based and solvent free systems. Typical application fields are wood lacquers (NC, 2 component-PU, acid hardening, incl. curtain coatings), decorative and house paints, 2 component-EP-systems, industrial coatings, printing inks etc..This product appears as a clear, slightly yellowish liquid. view less | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...view more WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. view less |
