| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...view more 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. view less | |
| ADDITOL® SXK 407 N | Allnex | ADDITOL® SXK 407 N is a catalyst for heat curing phenolic resins and combinations of phenolic- and epoxide resins. The addition of ADDITOL SXK 407 N also results in improved adhesion and resistance against sulphur staining. | Request Sample |
| ALNOVOL® PN 160 | Allnex | Alnovol® PN 160/PAST is a non-self-curing phenolic resin of the novolak type. This product is suitable for reinforcing natual rubber, styrene-butadiene rubber, EPDM rubber and nitrile rubber. Alnovol® PN 160/PAST is readily absorbed by the rubber mix and ...view more Alnovol® PN 160/PAST is a non-self-curing phenolic resin of the novolak type. This product is suitable for reinforcing natual rubber, styrene-butadiene rubber, EPDM rubber and nitrile rubber. Alnovol® PN 160/PAST is readily absorbed by the rubber mix and they have a strong plasticizing effect. view less | Request Sample |
| ALNOVOL® PN 320/PAST | Allnex | ALNOVOL® PN 320/PAST is a non-self-curing phenolic resins of the novolak type. It's usable to petrol-resistant coatings, sealers and electro insulating varnishes. | Request Sample |
| ALNOVOL® PN 760 | Allnex | ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low ...view more ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance. view less | Request Sample |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| Benester 910 | Benasedo | Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked ...view more Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked aliphatic polyisocyanates so to guarantee good adhesion on alluminium and glavanized steel, for high-gloss and flexible exterior top-coats. view less | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...view more Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. view less | |
| Dropol™ 2252 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2252 is a Pure Phenolic Novolac Resin. | |
| Dropol™ 2271 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2271 is an Alkyl Phenolic Resin. | |
| Dropol™ 2274 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2274 is an Alkyl Phenolic Resin. | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...view more Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. view less | |
| Eco-Rez™ 9711 A | Lawter | Eco-Rez™ 9711 A is a phenol formaldehyde-free resin with a low structure and has the benefit of a more stable rheology with improved gloss and high-speed transfer as added features. It has a high renewable content, providing a greener and more sustainable...view more Eco-Rez™ 9711 A is a phenol formaldehyde-free resin with a low structure and has the benefit of a more stable rheology with improved gloss and high-speed transfer as added features. It has a high renewable content, providing a greener and more sustainable chemistry option. The product is suitable for use in coldset, heatset and sheet-fed applications. view less | |
| Eco-Rez™ 9715 A | Lawter | Eco-Rez™ 9715 A is a phenol formaldehyde-free resin with a medium structure in a resin which provides limited solubility in aliphatic ink solvents.The product is part of a new generation of phenol-free resins with improved performance based on a more envi...view more Eco-Rez™ 9715 A is a phenol formaldehyde-free resin with a medium structure in a resin which provides limited solubility in aliphatic ink solvents.The product is part of a new generation of phenol-free resins with improved performance based on a more environmentally sustainable approach to formulations. High-speed transfer, sharp print images and water balance stability are part of the added benefits of the new technology. Eco-Rez™ 9715 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. view less | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...view more Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. view less | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...view more Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. view less | |
| Eco-Set™ 4500 A | Lawter | Eco-Set™ 4500 A is a flushing and pigment grinding sheet-fed vehicle which offers pigment dispersal in a more natural state using the phenol fomaldehyde-free resin system. The product has high renewable content, is fast setting with good gloss and water/i...view more Eco-Set™ 4500 A is a flushing and pigment grinding sheet-fed vehicle which offers pigment dispersal in a more natural state using the phenol fomaldehyde-free resin system. The product has high renewable content, is fast setting with good gloss and water/ink balance. It is ideal for use in commercial heatset inks, in packaging heatset inks, and in letterpress and insert inks. view less | |
| Eco-Set™ 4600 A | Lawter | Eco-Set™ 4600 A is a phenol formaldehyde-free, sheet-fed free-flow vehicle that has high renewable content which is geared toward demands for a greener and cleaner ink chemistry. Apart from sustainable chemistry interests, Eco-Set™ products are able to pr...view more Eco-Set™ 4600 A is a phenol formaldehyde-free, sheet-fed free-flow vehicle that has high renewable content which is geared toward demands for a greener and cleaner ink chemistry. Apart from sustainable chemistry interests, Eco-Set™ products are able to provide improved performance properties. Print sharpness, ink water balance and reduced misting tendencies allow the Eco-Set™ brand to be an ideal choice for commercial sheet-fed in product lines. The product is also ideal for use in letterpress inks, packaging sheet-fed inks and in laser form inks. view less | |
| Eco-Set™ 4801 A | Lawter | Eco-Set™ 4801 A is a non-volatile gel vehicle that is eco friendly due to its phenol formaldehyde-free and higher renewable materials that feed into demands for greener and cleaner chemistry requirements. Apart from the sustainability features, Eco-Set™ v...view more Eco-Set™ 4801 A is a non-volatile gel vehicle that is eco friendly due to its phenol formaldehyde-free and higher renewable materials that feed into demands for greener and cleaner chemistry requirements. Apart from the sustainability features, Eco-Set™ vehicles are able to provide improved performance properties like sharper print at lower tacks, reduced tendency to mist and ink water balance. The product is ideally suited for use in commercial sheet-fed inks, packaging sheet-fed inks, laser form inks and letterpress inks. view less | |
| Eco-Set™ 4802 A | Lawter | Eco-Set™ 4802 A is an eco-friendly fast setting high solids gel vehicle with phenol formaldehyde-free and renewable content allowing it to comply with demands for a greener and cleaner ink chemistry. The product offers moderate gel structure and hard dryi...view more Eco-Set™ 4802 A is an eco-friendly fast setting high solids gel vehicle with phenol formaldehyde-free and renewable content allowing it to comply with demands for a greener and cleaner ink chemistry. The product offers moderate gel structure and hard drying features along with good gloss and enhanced ink film hardness. It is suitable for use in commercial sheet-fed and letterpress inks, along with uses in packaging sheet-fed inks and laser form inks. view less | |
| Eco-Webb™ 5600 A | Lawter | Eco-Webb™ 5600 A is a free-flowing heatset vehicle that has low polarity resins that result in the ink water balance becoming less of a challenge during long press runs. Among the benefits of the product include a phenol that is formaldehyde-free, shows h...view more Eco-Webb™ 5600 A is a free-flowing heatset vehicle that has low polarity resins that result in the ink water balance becoming less of a challenge during long press runs. Among the benefits of the product include a phenol that is formaldehyde-free, shows high renewable content and is fast setting with good gloss. The product is ideal for use in commercial heatset, publication heatset and packaging heatset inks as well as insert inks. view less | |
| Eco-Webb™ 5801 A | Lawter | Eco-Webb™ 5801 A is a heatset gel vehicle with low polarity resins that result in the ink water balance becoming less of a challenge during long press runs. A phenol that is formaldehyde-free, it also has the benefit of giving print sharpness, offers high...view more Eco-Webb™ 5801 A is a heatset gel vehicle with low polarity resins that result in the ink water balance becoming less of a challenge during long press runs. A phenol that is formaldehyde-free, it also has the benefit of giving print sharpness, offers high renewable content and is fast setting. It is considered ideal in packaging heatset, commercial heatset and publication heatset inks as well as insert inks. view less | |
| Eco-Webb™ 5802 A | Lawter | Eco-Webb™ 5802 A is a heatset gel varnish with low polarity resins that cause ink water balance to be less of a challenge during long press runs. It is fast setting, has a high renewable content and provides ink sharpness. It is used in commercial heatset...view more Eco-Webb™ 5802 A is a heatset gel varnish with low polarity resins that cause ink water balance to be less of a challenge during long press runs. It is fast setting, has a high renewable content and provides ink sharpness. It is used in commercial heatset and packaging heatset inks and in letterpress and insert printing applications. view less | |
| Fenopol 90-100 | Polidur San Luis | Fenopol 90-100 is a rosin modified phenolic resin at 100% of solids. This product presents good solubility at aliphatic solvents, good dielectric properties and improvement of enamel´s gloss and hard dry. It has applications in insulating and oleoresin va...view more Fenopol 90-100 is a rosin modified phenolic resin at 100% of solids. This product presents good solubility at aliphatic solvents, good dielectric properties and improvement of enamel´s gloss and hard dry. It has applications in insulating and oleoresin varnishes and is a gloss and dry enamel modifier. view less | |
| GP 4003 | Univar Solutions | GP 4003 is a heatreactive waterborne phenolic resin engineered to replace solvent-based phenolic resins where low Volatile Organic Compound (VOC) emissions are desired. GP 4003 resin has a high degree of crosslink density and, when properly cured, produce...view more GP 4003 is a heatreactive waterborne phenolic resin engineered to replace solvent-based phenolic resins where low Volatile Organic Compound (VOC) emissions are desired. GP 4003 resin has a high degree of crosslink density and, when properly cured, produces protective coatings with excellent resistance to solvents and organic chemicals. It exhibits good corrosion resistance and may be useful in coating formulations for applications involving severe exposures. Its resistance to elements such as saltwater, make it an ideal resin for coatings for offshore oilfield platforms, metal fasteners and equipment. . view less | |
| GP 7565 LF | Univar Solutions | GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to ma...view more GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. view less | |
| GP BKR-2620 | Univar Solutions | GP BKR-2620 is a solid, heat-reactive, modified phenolic resin. It can be used with a wide selection of solvents and is compatible with plasticizers and polyvinyl butyral resins. Films made with unplasticized GP BKR-2620 resin have greater flexibility tha...view more GP BKR-2620 is a solid, heat-reactive, modified phenolic resin. It can be used with a wide selection of solvents and is compatible with plasticizers and polyvinyl butyral resins. Films made with unplasticized GP BKR-2620 resin have greater flexibility than those made with other unmodified phenolic resin baking solutions. view less | |
| GP BKS-2600 | Univar Solutions | GP BKS-2600 is a heat-reactive phenolic resin solution in ethanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates. . | |
| GP BKS-2603 | Univar Solutions | GP BKS-2603 is a heat-reactive phenolic resin solution in ethanol and butanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates. Similar to GP™ BLS-2700 coating resin, this product features better water com...view more GP BKS-2603 is a heat-reactive phenolic resin solution in ethanol and butanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates. Similar to GP™ BLS-2700 coating resin, this product features better water compatibility than GP BKS-2600 coating resin. view less | |
| GP BKS-2605 | Univar Solutions | GP BKS-2605 is a heat-reactive phenolic resin solution in ethanol and n-butanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates. | |
| GP BKS-2640 | Univar Solutions | GP BKS-2640 is a phenolic resin solution in n-butanol for coatings of rigid metallic substrates. It is generally used with nitrile rubber (high acrylonitrile) for adhesives. | |
| GP BKUA-2353 | Univar Solutions | GP BKUA-2353 is a non-heat-reactive aqueous dispersion for waterborne adhesives, sealants and coatings systems. It provides improved adhesion and green strength development in acrylic latex adhesives. GP BKUA-2353 is stabilized with a non-ionic emulsifier...view more GP BKUA-2353 is a non-heat-reactive aqueous dispersion for waterborne adhesives, sealants and coatings systems. It provides improved adhesion and green strength development in acrylic latex adhesives. GP BKUA-2353 is stabilized with a non-ionic emulsifier as well as a coupling solvent additive. . view less | |
| GP BKUA-2370 | Univar Solutions | GP BKUA-2370 is Resin dispersion is in a solvent of water and butyl Cellosolve® (ethylene glycol monobutyl ether). It is an effective crosslinker for adhesion of latex and phenoxy polymers and is formulated to improve chemical resistance. | |
| GP BLS-2700 | Univar Solutions | GP BLS-2700 is a liquid heat-reactive phenolic resin solution in n-butanol for coatings of rigid metallic substrates. It provides excellent intercoat adhesion and is effective as a metal primer. | |
| GP BRSD-2112 | Univar Solutions | GP BRSD-2112 is Heat reactive resin solution used in rubber to metal applications. | |
| GP CK-2103 | Univar Solutions | GP CK-2103 is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and adhesion. Coatings made with GP CK-2103 resin dry faster than those made with GP CK-2432 resin and will darken on drying. | |
| GP CK-2400 | Univar Solutions | GP CK-2400 is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, leveling, gloss and intercoat adhesion. | |
| GP CK-2420 | Univar Solutions | GP CK-2420 is Solid novolac resin used as a modifier for alkyd and epoxy air dry coatings. It is designed to improve water resistance, hardness, gloss and adhesion. It is also used to accelerate heat-bodying rate on linseed and dehydrated castor oils. | |
| GP CK-2500 | Univar Solutions | GP CK-2500 is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and intercoat adhesion. GP CK-2500 resin enables higher solids and lower viscosity solutions than those made with GP CK-2400 ...view more GP CK-2500 is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and intercoat adhesion. GP CK-2500 resin enables higher solids and lower viscosity solutions than those made with GP CK-2400 resin. view less | |
| GP LB-7575 | Univar Solutions | GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epox...view more GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. . view less | |
| PHENODUR® PR 217/65B | Allnex | PHENODUR® PR 217/65B is a curable phenolic resin. It is suitable for the interior coating of containers employed for packaging in the food and luxury commodity industries. | Request Sample |
| PHENODUR® PR 263/70B | Allnex | PHENODUR® PR 263/70B is a curable phenolic resin developed as a binder for shop- and washprimers. It has excellent pigment wetting properties. | Request Sample |
| PHENODUR® PR 285/55IB/B | Allnex | PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc...view more PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc.; for heat-curing phenolic/epoxide resin combinations. view less | Request Sample |
| Phenodur® PR 307/63X/MP | Allnex | Phenodur® PR 307/63X/MP is used for tinting/coloring resins to adjust gold shade of the cured coating films. | Request Sample |
| PHENODUR® PR 308/62MP | Allnex | PHENODUR® PR 308/62MP is a curable, unplasticized phenolic resin. It is used as a coloring resin for gold lacquers and solvent-borne systems. | Request Sample |
| PHENODUR® PR 309 /63 B/MP | Allnex | PHENODUR® PR 309 /63 B/MP is a tinting/coloring resins to adjust gold shade of the cured coating films. Very dark as form of delivery. PR 309 is the newest coloring agent development of Allnex and is not based on natural resin, extracted of pinewood stumps...view more PHENODUR® PR 309 /63 B/MP is a tinting/coloring resins to adjust gold shade of the cured coating films. Very dark as form of delivery. PR 309 is the newest coloring agent development of Allnex and is not based on natural resin, extracted of pinewood stumps. view less | Request Sample |
| PHENODUR® PR 371/70B | Allnex | PHENODUR® PR 371/70B is a straight phenol based type of very high chemical resistance and limited flexibility. For can coatings including BADGE- and BPA-NI formulas and interior drum linings. Low free formaldehyde version available. | Request Sample |
| PHENODUR® PR 371/70B LF | Allnex | PHENODUR® PR 371/70B LF is a straight phenol based type of very high chemical resistance and limited flexibility. For can coatings including BADGE- and BPA-NI formulas and interior drum linings. Low free formaldehyde version. | Request Sample |
| PHENODUR® PR 401/72B | Allnex | PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelin...view more PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil. view less | Request Sample |
| PHENODUR® PR 405 /72B | Allnex | PHENODUR® PR 405/72B is a tailor-sized phenolic resin for electronic application. | Request Sample |
| PHENODUR® PR 411/75B | Allnex | PHENODUR® PR 411/75B is a heat curable phenolic resin for the coating of interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines. | Request Sample |
| PHENODUR® PR 515/60LG | Allnex | PHENODUR® PR 515/60LG is a curable, unplasticized phenolic resin. It has excellent adhesion, hardness and flexibility. It also has very good resistance against chemicals, mineral oils and food for the interior coating of metal packaging goods. | Request Sample |
| PHENODUR® PR 517/60B | Allnex | PHENODUR® PR 517 is a curable phenolic resin. Good flexibility and high sulphur resistance with EPOXY- and PE resins. Low free formaldehyde of < 0,5%. | Request Sample |
| PHENODUR® PR 520/65B | Allnex | PHENODUR® PR 520 is a curable, unplasticized phenolic resin. Type PHENODUR® PR 516, higher solid (less VOC) and less migration, curing speed slightly lower vs. original type PHENODUR® PR 516. Intended to be used for BADGE- and BPA-NI application. | Request Sample |
| PHENODUR® PR 521/60B | Allnex | PHENODUR® PR 521 is a heat curing, unplasticized phenolic resin. Higher reactive version of PHENODUR® PR 516, for BADGE- and BPA-NI usage. | Request Sample |
| PHENODUR® PR 612/80B | Allnex | PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varni...view more PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes. view less | Request Sample |
| PHENODUR® PR 612/80B LF | Allnex | PHENODUR® PR 612/80B LF is a curable phenolic resin, with lower free formaldehyde levels compared to PR 612/80B. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels...view more PHENODUR® PR 612/80B LF is a curable phenolic resin, with lower free formaldehyde levels compared to PR 612/80B. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes. view less | Request Sample |
| PHENODUR® PR 616/65B | Allnex | PHENODUR® PR 616/65B is a heat curable BPA NI phenolic resin. It is used in heat-curable phenolic with epoxide or polyester resin combinations, high-adhesion, chemically resistant protective coatings for interior or exterior can coatings and drum linings. | Request Sample |
| PHENODUR® PR 722/53BG/B | Allnex | Phenodur® PR 722/53BG/B is a curable unplasticized phenolic resin for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant protective coatings for apparatus, vessels and pipelines. | Request Sample |
| PHENODUR® PR 827/70MPAC | Allnex | PHENODUR® PR 827 is a Bisphenol A-free, heat curing, non-plasticized phenolic resin. Light color, excellent flexibility and good sulphur resistance, medium reactivity, for BADGE- and BPA-NI usage, “coil for can” cycle and foils. | Request Sample |
| PHENODUR® PR 899/60MPAC | Allnex | PHENODUR PR 899 is a curable phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE free systems). High adhesion, chemically resistant protective coatings for cans, apparatus, vessels and pipelines. Excellent chemical resi...view more PHENODUR PR 899 is a curable phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE free systems). High adhesion, chemically resistant protective coatings for cans, apparatus, vessels and pipelines. Excellent chemical resistance, medium flexibility, golden color shade, for BADGE- and BPA-NI lacquers. view less | Request Sample |
| PHENODUR® PR 909w/50WA | Allnex | Phenodur® PR 909W/50WA is a water dilutable, thermosetting, plasticized phenolic resin. It's a sole binder for the production of solvent-resistant interior coatings for non-food metal packaging goods. | Request Sample |
| PHENODUR® VPM 1150/50EPAC | Allnex | PHENODUR® VPM 1150/50EPAC is a carboxy modified, nonyellowing co-curing resin. It is used in combination with high molecular weight epoxide resins for stoving interior and exterior can coating systems, foil lacquers, stamping enamels, coil coating primer ...view more PHENODUR® VPM 1150/50EPAC is a carboxy modified, nonyellowing co-curing resin. It is used in combination with high molecular weight epoxide resins for stoving interior and exterior can coating systems, foil lacquers, stamping enamels, coil coating primer and chemical resistant primer. view less | Request Sample |
| PHENODUR® VPR 1740/50WA | Allnex | PHENODUR® VPR 1740/50WA is a dispersion based on phenol resol. This product is used as a binder for coated abrasives and impragnation. It shows a high drying and curing speed because of its dispersion characteristic. On organic and inorganic surfaces this...view more PHENODUR® VPR 1740/50WA is a dispersion based on phenol resol. This product is used as a binder for coated abrasives and impragnation. It shows a high drying and curing speed because of its dispersion characteristic. On organic and inorganic surfaces this product exhibits good adhesion. view less | Request Sample |
| PHENODUR® VPR 1785/50MP | Allnex | PHENODUR® VPR 1785/50MP is a low viscous, non-plasticized reactive and relatively flexible phenol-resol, containing very little free monomers. It's used as a sole binder or in combination with small amounts of high molecular weight polymers like (poly) vi...view more PHENODUR® VPR 1785/50MP is a low viscous, non-plasticized reactive and relatively flexible phenol-resol, containing very little free monomers. It's used as a sole binder or in combination with small amounts of high molecular weight polymers like (poly) vinyl butyral for interior can coating systems (e.g. for 3-piece cans). view less | Request Sample |
| PHENODUR® VPR 1785/65B | Allnex | PHENODUR® VPR 1785/65B is a low viscous, non-plasticized reactive and relatively flexible phenol-resol, containing very little free monomers. It's used as a sole binder or in combination with small amounts of high molecular weight polymers like (poly) vin...view more PHENODUR® VPR 1785/65B is a low viscous, non-plasticized reactive and relatively flexible phenol-resol, containing very little free monomers. It's used as a sole binder or in combination with small amounts of high molecular weight polymers like (poly) vinyl butyral for interior can coating systems (e.g. for 3-piece cans). view less | Request Sample |
| PHENODUR® VPW 1946 46WA | Allnex | Phenodur® VPW 1946/46WA is a water dilutable, heat cross-linking phenolic/epoxide pre-condensate. This product is is a formulated phenolic/epoxide resin, intended as a sole binder for corrosion resistant industrial stoving systems. When compared to Phenod...view more Phenodur® VPW 1946/46WA is a water dilutable, heat cross-linking phenolic/epoxide pre-condensate. This product is is a formulated phenolic/epoxide resin, intended as a sole binder for corrosion resistant industrial stoving systems. When compared to Phenodur® VPW 1942, VPW 1946 cures at lower temperatures. view less | Request Sample |
| PHENODUR® VPW 1947/50WA | Allnex | PHENODUR® VPW 1947/50WA is a real self-crosslinking grade, can be used either as sole binder, or in combination with backbone binders, good adhesion on various metal substrates, excellent chemical/acid resistance, high hardness & heat resistance. | Request Sample |
| POLIFEN 2090 | Benasedo | POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric ...view more POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric acid catalyst are helpful to achieve a fully cured polymer. view less | |
| Polifen 365 | Benasedo | Polifen 365 is a Water soluble Phenolic Resin to be combined with Epoxy resins for interior clear and pigmented enamels used in the Can Coating fields. It is suitable for food contact paints, according to FDA 21 CFR175.300. | |
| Polifen 410 | Benasedo | Polifen 410 is yellow brown resin suitable for interior gold lacquers used in the can coating field. It is in compliance with FDA 21 CFR 175.300, so that it could be used for food contact paints. | |
| POLIFEN 6120 | Benasedo | POLIFEN 6120 is a BPA and BADGE free binder endowed with high solid content. It is suitable to formulate food contact interior can coating paints, according to FDA 21 CFR 175.300. POLIFEN 6120 is endowed with very good flexibility, adhesion and chemical ...view more POLIFEN 6120 is a BPA and BADGE free binder endowed with high solid content. It is suitable to formulate food contact interior can coating paints, according to FDA 21 CFR 175.300. POLIFEN 6120 is endowed with very good flexibility, adhesion and chemical resistance properties. view less | |
| Reactol™ 1111 E | Lawter | Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and aceta...view more Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and acetates when combined with drying oils. Reactol™ 1111 E is used in weather-resistant finishes, in cold-mix and spar varnishes and in flexo and gravure inks and lacquers. view less | |
| Webvar™ 50 A | Lawter | Webvar™ 50 A is a free-flowing heatset ink vehicle with a phenolic backbone that is structured with a high molecular weight modification. Resins within this category provide transfer, lithographic balance, gloss and superior rub. One the other hand, the c...view more Webvar™ 50 A is a free-flowing heatset ink vehicle with a phenolic backbone that is structured with a high molecular weight modification. Resins within this category provide transfer, lithographic balance, gloss and superior rub. One the other hand, the co-resin in Webvar™ 50 A is listed as a high yield hydrocarbon resin which boosts wet pigment, gloss and water balance. The combination of characteristics from the resin categories provides the running properties needed to produce a good web ink. The product is used in heatset inks. view less | |
| Webvar™ 55 A | Lawter | Webvar™ 55 A is a heatset gel vehicle with two resin extremes. On the one hand the product is listed as a structured, high molecular weight modified phenolic backbone offering resins with good lithographic balance, transfer, gloss and superior rub. On the...view more Webvar™ 55 A is a heatset gel vehicle with two resin extremes. On the one hand the product is listed as a structured, high molecular weight modified phenolic backbone offering resins with good lithographic balance, transfer, gloss and superior rub. On the other hand, the co-resin in the product is considered a high yield hydrocarbon resin that offers improved water balance, wet pigment and gloss. The combination of the two resins provides the running properties required for a good web ink. The product is used in heatset offset applications. view less | |
| WorléeFen F 105 | Worlée-Chemie G.m.b.H. | WorléeFen F 105 is an oil soluble phenolic modified hard resin. It is used in combination with oils and alkyds in paints and coatings to impart excellent hardening and weather resistance. W´Fen F 105 is compatible with drying short, medium and long oil al...view more WorléeFen F 105 is an oil soluble phenolic modified hard resin. It is used in combination with oils and alkyds in paints and coatings to impart excellent hardening and weather resistance. W´Fen F 105 is compatible with drying short, medium and long oil alkyds. This product is used as a resin of addition in primers and in anti-corrosive, marine and do-it-yourself paints. view less | |
| WorléeFen F 120 | Worlée-Chemie G.m.b.H. | WorléeFen F 120 is a phenolic modified hard resin used in combination with alkyds and in cooking with drying and stand oils. W´Fen F 120 differs from W´Fen 105 by a higher melting point, more hardness and higher viscosity. It can be used for cold blend wi...view more WorléeFen F 120 is a phenolic modified hard resin used in combination with alkyds and in cooking with drying and stand oils. W´Fen F 120 differs from W´Fen 105 by a higher melting point, more hardness and higher viscosity. It can be used for cold blend with alkyds as well. Due to the very good water and weather resistance and to the relatively pale colour, W´Fen F 120 is used for the manufacture of yacht and exterior varnishes. Furthermore, this product is used in varnishes for floors, furniture and marine paints. W´Fen F 120 can also be used for alkyd modification view less | |
| WorléeFen F 130 | Worlée-Chemie G.m.b.H. | WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. ...view more WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. It is also well compatible with drying oils. view less |
