| 1,4-Butanediol (1,4-BDO) | INVISTA | 1,4-Butanediol (1,4-BDO) is a colourless at room temperature viscous liquid or white solid (depending on temperature). 1,4-BDO is used in both the hard and soft segments of Polyurethanes, in the hard segment as a chain extender and in the soft segment as ...view more 1,4-Butanediol (1,4-BDO) is a colourless at room temperature viscous liquid or white solid (depending on temperature). 1,4-BDO is used in both the hard and soft segments of Polyurethanes, in the hard segment as a chain extender and in the soft segment as polyesterdioles such as polybutylene adipate glycol. 1,4-BDO is used to make a variety of esters, including monomeric plasticizers, the engineering plastic polybutylene terephthalate (PBT) and low molecular weight polyester glycols. The polyester glycols are used as soft segments in polyurethanes and are made by reacting 1,4-BDO with various dibasic acids such as adipic and sebacic acid. view less | |
| Corfree® M1 | INVISTA | Corfree® M1 is a nitrite-free dibasic acid mixture, primarily C11 and C12, which provides excellent ferrous corrosion inhibition properties. It is used in a variety of corrosion inhibitor applications, including metalworking fluids, engine coolants, metal...view more Corfree® M1 is a nitrite-free dibasic acid mixture, primarily C11 and C12, which provides excellent ferrous corrosion inhibition properties. It is used in a variety of corrosion inhibitor applications, including metalworking fluids, engine coolants, metal cleaners, aqueous hydraulic fluids, and die cast release agents. When formulated as an amine salt, Corfree® M1 dibasic acid provides superior corrosion protection to alternatives such as sebacic acid, azelaic acid, and long-chain monobasic acids. Corfree® M1 dibasic acid formulations do not leave undesirable, hard-to-clean residues associated with amine borate formulations. view less | |
| Corfree® M4-10 | INVISTA | Corfree® M4-10 is a diacid mixture, primarily from C9 to C12, which provides good ferrous corrosion inhibition properties. It is used in the Metalworking Fluid as a corrosion inhibitor. When formulated as an amine salt, Corfree® M4-10 diacid provides exce...view more Corfree® M4-10 is a diacid mixture, primarily from C9 to C12, which provides good ferrous corrosion inhibition properties. It is used in the Metalworking Fluid as a corrosion inhibitor. When formulated as an amine salt, Corfree® M4-10 diacid provides excellent corrosion protection to alternatives such as sebacic acid, azelaic acid, and long-chain monobasic acids. view less | |
| Cyclododecanol (CDDA) | INVISTA | Cyclododecanol (CDDA) is a high-purity, white solid, cyclic alcohol. It has a molecular formula of C12H24O. This product is commonly used in fragrances, polymers, plasticizers, solvents, and other specialty chemicals. | |
| DBA-F™ Dibasic Acid Flake | INVISTA | DBA-F™ Dibasic Acid Flake is an aliphatic dibasic acid containing primarily glutaric, succinic, and adipic acids. It is specially processed to minimize impurities, particularly nitric acid and metals, and is provided in an easy-to-handle flake form. DBA...view more DBA-F™ Dibasic Acid Flake is an aliphatic dibasic acid containing primarily glutaric, succinic, and adipic acids. It is specially processed to minimize impurities, particularly nitric acid and metals, and is provided in an easy-to-handle flake form. DBA-F can be used as a pH buffer for lime and limestone SO2 scrubbers (flue gas desulfurization), in polyester polyols for polyurethanes and polyisocyanurates, in scale removers and cleaning applications, in polyester resins, in water treatment chemicals, in tanning agents, and as an added corrosion inhibitor. view less | |
| Diisobutyl DBE (DBE-IB) | INVISTA | Diisobutyl DBE (DBE-IB) is a high-boiling, oxygenated solvent comprising a refined mixture of diisobutyl adipate, glutarate, and succinate. Its properties include low vapor pressure, biodegradability, excellent thermal and hydrolytic stability, ability to...view more Diisobutyl DBE (DBE-IB) is a high-boiling, oxygenated solvent comprising a refined mixture of diisobutyl adipate, glutarate, and succinate. Its properties include low vapor pressure, biodegradability, excellent thermal and hydrolytic stability, ability to dissolve many resins, miscibility with most organic solvents, and very mild odor. DBE-IB is commonly used in waterborne coatings, solvent coatings, printing ink solvents, and cleaning solvents. view less | |
| Dodecanedioic Acid (DDDA) | INVISTA | Dodecanedioic Acid (DDDA) is a highly pure C12 dibasic acid that is available in white flake form. This product is commonly used in adhesives, corrosion inhibitors, capacitor electrolytes, diester synthetic lubricants, fibers, powder coating curatives, pl...view more Dodecanedioic Acid (DDDA) is a highly pure C12 dibasic acid that is available in white flake form. This product is commonly used in adhesives, corrosion inhibitors, capacitor electrolytes, diester synthetic lubricants, fibers, powder coating curatives, plasticizers, polyester coatings, epoxy resins, and polyamide resins. view less | |
| Dytek® A | INVISTA | Dytek® A is an amine composed primarily of 2-Methylpentamethylenediamine (MPMD). Its methyl-branched, 5-carbon chain provides its derivatives with unique properties such as lower viscosity, greater flexibility, and better compatibility. With diacids, it f...view more Dytek® A is an amine composed primarily of 2-Methylpentamethylenediamine (MPMD). Its methyl-branched, 5-carbon chain provides its derivatives with unique properties such as lower viscosity, greater flexibility, and better compatibility. With diacids, it forms high molecular weight polyamide polymers and copolymers with lower melting points and less crystallinity than polymers made with hexamethylenediamine. Dytek® A can be used in a wide array of applications, including polyamide plastics, films, and fibers, polyamide adhesive and ink resins, epoxy curing agents, water treatment chemicals, polyurethanes, and organic syntheses. view less | |
| Dytek® BHMT 80 | INVISTA | Dytek® BHMT 80 is a mixed amine containing 80-82 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic colle...view more Dytek® BHMT 80 is a mixed amine containing 80-82 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. view less | |
| Dytek® BHMT Amine (25% to 49%) | INVISTA | Dytek® BHMT Amine (25% to 49%) is a mixed amine containing 25-49 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents...view more Dytek® BHMT Amine (25% to 49%) is a mixed amine containing 25-49 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. view less | |
| Dytek® BHMT Amine (50% to 78%) | INVISTA | Dytek® BHMT Amine (50% to 78%) is a mixed amine containing 50-78 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents...view more Dytek® BHMT Amine (50% to 78%) is a mixed amine containing 50-78 wt% of Bis(hexamethylene)triamine (BHMT) as the primary component. This product can be used in a variety of applications, including asphalt anti-stripping agents, cationic emulsifying agents, cationic collectors for ore flotation, chelating agent, corrosion and scale inhibitors, curing agents for urethanes, curing agents for epoxy resins, flocculating agents, and wet strength paper resins. view less | |
| Dytek® DCH-99 | INVISTA | Dytek® DCH-99 is a cyclic aliphatic diamine composed primarily of 1,2-Diaminocyclohexane. It is a mixture of cis- and trans-isomers and a clear liquid at room temperature with an amine-like odor. This product can be used in a variety of applications, incl...view more Dytek® DCH-99 is a cyclic aliphatic diamine composed primarily of 1,2-Diaminocyclohexane. It is a mixture of cis- and trans-isomers and a clear liquid at room temperature with an amine-like odor. This product can be used in a variety of applications, including urethanes, epoxies, chelating agents, epoxy curing agents, herbicide intermediates, polyamide resins, polyurethanes, polyurea, and scale and corrosion inhibitors. view less | |
| Dytek® EP | INVISTA | Dytek® EP is a low viscosity, low odor, biodegradable, liquid diamine featuring an odd carbon, ethylbranched, asymmetric structure and differential amine reactivity. This product is ideal for applications such as polyamide monomers, low viscosity urethane...view more Dytek® EP is a low viscosity, low odor, biodegradable, liquid diamine featuring an odd carbon, ethylbranched, asymmetric structure and differential amine reactivity. This product is ideal for applications such as polyamide monomers, low viscosity urethanes, low viscosity epoxy curatives, divalent amine solvents, surfactants, calcium scale inhibitors, and plastic and petrochemical additives. view less | |
| Dytek® HMI | INVISTA | Dytek® HMI is clear, colorless liquid with an ammonia-like odor, composed primarily of hexamethyleneimine. This product can be used in a variety of applications, including pharmaceuticals, agricultural chemicals, zeolite manufacture, dyes, inks, rubber ch...view more Dytek® HMI is clear, colorless liquid with an ammonia-like odor, composed primarily of hexamethyleneimine. This product can be used in a variety of applications, including pharmaceuticals, agricultural chemicals, zeolite manufacture, dyes, inks, rubber chemicals, textile chemicals, corrosion inhibitors, and ore flotation. view less | |
| FlexiSolv® DBE® Esters | INVISTA | FlexiSolv® DBE® Esters are refined dimethyl esters of adipic (21%), glutaric (59%), and succinic (20%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydro...view more FlexiSolv® DBE® Esters are refined dimethyl esters of adipic (21%), glutaric (59%), and succinic (20%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-2 Esters | INVISTA | FlexiSolv® DBE®-2 Esters are refined dimethyl esters of adipic (24%), glutaric (75%), and succinic (0.3%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hy...view more FlexiSolv® DBE®-2 Esters are refined dimethyl esters of adipic (24%), glutaric (75%), and succinic (0.3%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-3 Esters | INVISTA | FlexiSolv® DBE®-3 Esters are refined dimethyl esters of adipic (89%), glutaric (10%), and succinic (0.2%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hy...view more FlexiSolv® DBE®-3 Esters are refined dimethyl esters of adipic (89%), glutaric (10%), and succinic (0.2%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-4 Esters | INVISTA | FlexiSolv® DBE®-4 Esters are refined dimethyl esters of glutaric (0.3%) and succinic (98.4%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, b...view more FlexiSolv® DBE®-4 Esters are refined dimethyl esters of glutaric (0.3%) and succinic (98.4%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-5 Esters | INVISTA | FlexiSolv® DBE®-5 Esters are refined dimethyl esters of adipic (0.1%), glutaric (98.5%), and succinic (0.4%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many...view more FlexiSolv® DBE®-5 Esters are refined dimethyl esters of adipic (0.1%), glutaric (98.5%), and succinic (0.4%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-6 Esters | INVISTA | FlexiSolv® DBE®-6 Esters are refined dimethyl esters of adipic (98.7%), glutaric (<0.5%), and succinic (<0.1%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and ma...view more FlexiSolv® DBE®-6 Esters are refined dimethyl esters of adipic (98.7%), glutaric (<0.5%), and succinic (<0.1%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-9 Esters | INVISTA | FlexiSolv® DBE®-9 Esters are refined dimethyl esters of adipic (0.2%), glutaric (66%), and succinic (33%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hy...view more FlexiSolv® DBE®-9 Esters are refined dimethyl esters of adipic (0.2%), glutaric (66%), and succinic (33%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| FlexiSolv® DBE®-LVP Esters | INVISTA | FlexiSolv® DBE®-LVP Esters are delivered in a mixed aliphatic ester fluid with extremely low vapor pressure. They meet the consumer products LVP-VOC exemption criteria and therefore do not count towards the total VOC content of the regulated consumer prod...view more FlexiSolv® DBE®-LVP Esters are delivered in a mixed aliphatic ester fluid with extremely low vapor pressure. They meet the consumer products LVP-VOC exemption criteria and therefore do not count towards the total VOC content of the regulated consumer products. They are also nonflammable, readily biodegradable, non-corrosive, and has a mild odor. FlexiSolv® DBE®-LVP Esters are ideal for use in paint and graffiti removers, nail polish removers, hand cleaners, adhesives, sealants, caulks, automotive cleaning products, bathroom and tile cleaners, all purpose cleaners, spot cleaners, and floor maintenance products. view less | |
| FlexiSolv® DBE®-WS Esters | INVISTA | FlexiSolv® DBE®-WS Esters are refined dimethyl esters of adipic (20%), glutaric (65%), and succinic (13%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hy...view more FlexiSolv® DBE®-WS Esters are refined dimethyl esters of adipic (20%), glutaric (65%), and succinic (13%) acids. They are delivered as a clear, colorless liquid having a mild, fruity odor. They are readily soluble in alcohols, ketones, ethers, and many hydrocarbons, but are only slightly soluble in water and higher paraffins. This product can be used in a variety of solvent, plasticizer, and polymer intermediate applications. view less | |
| TERATHANE® 1000 PTMEG | INVISTA | TERATHANE® 1000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...view more TERATHANE® 1000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade helps improve mechanical properties where the isocyanate is TDI. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 1400 PTMEG | INVISTA | TERATHANE® 1400 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...view more TERATHANE® 1400 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives give properties intermediate between 1000 and 2000. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 1800 PTMEG | INVISTA | TERATHANE® 1800 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...view more TERATHANE® 1800 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives give properties intermediate between 1000 and 2000. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 2000 PTMEG | INVISTA | TERATHANE® 2000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...view more TERATHANE® 2000 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives the best spectrum of properties in most applications. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 250 PTMEG | INVISTA | TERATHANE® 250 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety o...view more TERATHANE® 250 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade was commercialized in 1997. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 2900 PTMEG | INVISTA | TERATHANE® 2900 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety ...view more TERATHANE® 2900 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade gives the softest elastomers. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERATHANE® 650 PTMEG | INVISTA | TERATHANE® 650 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety o...view more TERATHANE® 650 PTMEG is a liquid to waxy white solid, composed primarily of polytetramethylene ether glycol, that melts to a clear colorless, viscous liquid on a wide temperature range near room temperature. It reacts with isocyanates to form a variety of modern polymers, chiefly polyurethanes. This grade provides the lowest viscosity and greatest hardness. TERATHANE® PTMEG used in numerous applications, such as industrial wheels, recreational wheels, industrial belts, hose and tubing, films for lamination, tank and pipe liners, apparel coatings, construction coatings, security glazing, spandex fiber, and synthetic polyurethane leather. view less | |
| TERRIN™ 168 | INVISTA | TERRIN™ 168 is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 350 CPS. This product can be used in lieu of or in combination wi...view more TERRIN™ 168 is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 350 CPS. This product can be used in lieu of or in combination with conventional polyether or polyester polyols to formulate a variety of polyurethane products. The resulting polyurethanes can be formulated to be soft and flexible or hard and stiff. view less | |
| TERRIN™ 168G | INVISTA | TERRIN™ 168G is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 830 CPS. This product can be used in lieu of or in combination w...view more TERRIN™ 168G is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 830 CPS. This product can be used in lieu of or in combination with conventional polyether or polyester polyols to formulate a variety of polyurethane products. The resulting polyurethanes can be formulated to be soft and flexible or hard and stiff. view less | |
| TERRIN™ 170 | INVISTA | TERRIN™ 170 is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 5500 CPS. This product can be used in lieu of or in combination w...view more TERRIN™ 170 is a 100% aliphatic polyester polyols containing a minimum of 50% recycled content. It has a maximum acid number of 1.0, a hydroxyl number of 160-180, and a typical viscosity of 5500 CPS. This product can be used in lieu of or in combination with conventional polyether or polyester polyols to formulate a variety of polyurethane products. The resulting polyurethanes can be formulated to be soft and flexible or hard and stiff. view less | |
| Tetrahydrofuran (THF) | INVISTA | Tetrahydrofuran (THF) is an industrial solvent widely recognized for its unique combination of useful properties. It is over 99.9% pure with a small (75-150 ppm) amount of butylated hydroxytoluene added as an antioxidant. Tetrahydrofuran is miscible with ...view more Tetrahydrofuran (THF) is an industrial solvent widely recognized for its unique combination of useful properties. It is over 99.9% pure with a small (75-150 ppm) amount of butylated hydroxytoluene added as an antioxidant. Tetrahydrofuran is miscible with water and common organic solvents. Thus, THF can be used alone or in mixtures with other less active solvents to increase overall solvent power. view less |
