| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...view more ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. view less | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...view more ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...view more Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. view less | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...view more DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. view less | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...view more DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. view less | |
| KA-101 | Keeneyes International Co., Ltd. | KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparati...view more KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. view less | |
| KA-105 | Keeneyes International Co., Ltd. | KA-105 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-120 | Keeneyes International Co., Ltd. | KA-120 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-552 | Keeneyes International Co., Ltd. | KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free...view more KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free based exterior durable powder coatings. Its characteristics include low toxicity, non-irritating to skin, and good weather durability. view less | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...view more KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. view less | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...view more KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. view less | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7111 | Keeneyes International Co., Ltd. | KA-7111 is a special matting powder which is used in PU semi-gloss coatings for artificial leather. It has many beneficial properties, such as good transparency, good dispersibility, high matting effect, and good hand feel and smoothness. | |
| KA-7302 | Keeneyes International Co., Ltd. | KA-7302 is a matting powder for PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-7502 | Keeneyes International Co., Ltd. | KA-7502 is a matting agent intended for sealants and plastics. It has an excellent matting/flatting effect, and can meet such special requirements like transparency and dispersibility. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-81 | Keeneyes International Co., Ltd. | KA-81 is a decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-81F | Keeneyes International Co., Ltd. | KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal...view more KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. view less | |
| KA-81S | Keeneyes International Co., Ltd. | KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of univers...view more KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. view less | |
| KA-81U | Keeneyes International Co., Ltd. | KA-81U is a decolored aldehyde resin that can be applied in UV ink. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-B | Keeneyes International Co., Ltd. | KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...view more KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. view less | |
| KA-C | Keeneyes International Co., Ltd. | KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...view more KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. view less | |
| KA-D4 | Keeneyes International Co., Ltd. | KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive...view more KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. view less | |
| KA-D40 | Keeneyes International Co., Ltd. | KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductiv...view more KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. view less | |
| KA-P | Keeneyes International Co., Ltd. | KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conduc...view more KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. view less | |
| KA-PE-27 | Keeneyes International Co., Ltd. | KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to ...view more KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to enforce the property of coating film. With a proper catalyst, this product can improve the adhesion property between metal and plastic material. view less | |
| KA-T11 | Keeneyes International Co., Ltd. | KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...view more KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. view less | |
| KA-W1 | Keeneyes International Co., Ltd. | KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free condu...view more KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. view less | |
| KA-W11 | Keeneyes International Co., Ltd. | KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...view more KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. view less | |
| KAE-14 | Keeneyes International Co., Ltd. | KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high...view more KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high peeling strength. view less | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...view more KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. view less | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...view more KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. view less | |
| KAPU IL-50 | Keeneyes International Co., Ltd. | KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. | |
| KAPU L-75 | Keeneyes International Co., Ltd. | KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral subs...view more KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. These can be used to bond many materials, such as wood, metal and plastic. view less | |
| MDATP-1W | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...view more MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less | |
| MDATP-2SW | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...view more MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less | |
| P-Chlorobenzotrifluoride | Keeneyes International Co., Ltd. | P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks...view more P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks faster than toluene, a common alternative solvent. PCBTF is also used as a replacement for xylene in cleaning, degreasing, and paint thinner products. view less | |
| TGIC | Keeneyes International Co., Ltd. | TGIC (Triglycidyl Isocyanurate) is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion, and excellent high temperature stability. This product is mainly used as a curing agent, insulating lamin...view more TGIC (Triglycidyl Isocyanurate) is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion, and excellent high temperature stability. This product is mainly used as a curing agent, insulating laminate sheet, adhesive, and plastic stabilizer. view less |
