| Carboquat® MW-50 | Arxada | Carboquat® MW-50 is a preservative which can be used to inhibit bacteria and fungal growth in metalworking fluids and related fluids like hydraulic fluids and compressor oils. It may also be used for slime control and sulfate reducing bacteria in oil fiel...view more Carboquat® MW-50 is a preservative which can be used to inhibit bacteria and fungal growth in metalworking fluids and related fluids like hydraulic fluids and compressor oils. It may also be used for slime control and sulfate reducing bacteria in oil field water flood systems. This product also aids in the control of bacterial and fungal growth in paints, petroleum products, decorative coatings, industrial cleaning solutions, and related products in aerosol cans. view less | |
| Carboshield® 1000 | Arxada | Carboshield® 1000 is a comprised of a blend of didecyl dimethyl ammonium carbonate and didecyl dimethyl ammonium bicarbonate. Unlike a traditional chloride quaternary, this advanced non-chloride quaternary provides excellent corrosion inhibition propertie...view more Carboshield® 1000 is a comprised of a blend of didecyl dimethyl ammonium carbonate and didecyl dimethyl ammonium bicarbonate. Unlike a traditional chloride quaternary, this advanced non-chloride quaternary provides excellent corrosion inhibition properties on a wide variety of metal substrates. Its intended uses are as a cationic surfactant for non-EPA registered applications, a thin film forming corrosion inhibitor, or as a wetting/dispersion agent. view less | |
| Dantogard™ | Arxada | Dantogard™ can be used in a broad number of household and industrial cleaning products to prevent spoilage from microorganisms. Typical use levels are from 0.40 – 0.80%. Additionally, Dantogard™ is FDA acceptable and EPA approved for use in various minera...view more Dantogard™ can be used in a broad number of household and industrial cleaning products to prevent spoilage from microorganisms. Typical use levels are from 0.40 – 0.80%. Additionally, Dantogard™ is FDA acceptable and EPA approved for use in various mineral slurries and paper coatings. view less | |
| Dantogard™ Plus Liquid | Arxada | Dantogard™ Plus Liquid is based on DMDM Hydantoin and lodopropynyl Butylcarbamate and is compatible in a range of aqueous formulations including surfactants, household cleaning products, and dish detergents to name a few. | |
| Dantoserve® SG | Arxada | Dantoserve® SG preservative is an advanced system engineered for a wide variety of household and industrial product applications. US EPA registered, highly stable and safer to handle than conventional approaches, Dantoserve® SG synergistically combines th...view more Dantoserve® SG preservative is an advanced system engineered for a wide variety of household and industrial product applications. US EPA registered, highly stable and safer to handle than conventional approaches, Dantoserve® SG synergistically combines the activity of two well-established preservative chemistries—hydantoins and isothiazolinones. view less | |
| Densil™ DG20 Antimicrobial | Arxada | Densil ™ DG20 has a broad spectrum of activity against fungi, bacteria, algae, yeast and bacteria. It can be used in many different application areas to offer dry film and wet state preservation. | |
| Isocil® WT | Arxada | Isocil® WT is an EPA registered industrial mildewcide for use as directed in the approved EPA label in coatings, paints, building materials, wallpaper pastes and adhesives, aqueous adhesives and tackifiers, leather, hides, metalworking cutting fluids, fab...view more Isocil® WT is an EPA registered industrial mildewcide for use as directed in the approved EPA label in coatings, paints, building materials, wallpaper pastes and adhesives, aqueous adhesives and tackifiers, leather, hides, metalworking cutting fluids, fabric and fabric surfaces, vinyl, plastics, emulsions, hydraulic fluids, textiles, laundry, cooling tower water, caulking compounds, polymers and polyurethane, and air washer systems. view less | |
| Lonzabac® 12 | Arxada | Lonzabac® 12 is an active material with broad spectrum activity against both gram positive and gram negative bacteria. It maintains its high efficacy in the presence of heavy organic soiling while also having good surfactant properties. This material is f...view more Lonzabac® 12 is an active material with broad spectrum activity against both gram positive and gram negative bacteria. It maintains its high efficacy in the presence of heavy organic soiling while also having good surfactant properties. This material is for formulation into antimicrobial/disinfectant product for use on hard nonporous surfaces. view less | |
| Lonzest® GDL | Arxada | Lonzest® GDL is a Glyceryl Dilaurate product supplied as a solid ivory paste. It is suggested for use as an emulsifier and viscosity modifier. | |
| Lonzest® GMO | Arxada | Lonzest® GMO is based on Glyceryl Monooleate. It is a liquid, low HLB nonionic surfactant used in a variety of markets. | |
| Lonzest® GMT | Arxada | Lonzest® GMT is composed of Glyceryl Monotallate. It is suggested for use as an emulsifier and viscosity modifier, and is used as a lubricant in metalworking applications. | |
| Lonzest® SML | Arxada | Lonzest® SML is a versatile, water dispersible, mid-range HLB surfactant composed of Sorbitan Monolaurate. It is suggested for use as an emulsifier and lubricant. | |
| Lonzest® SML-20 | Arxada | Lonzest® SML-20 is a high HLB surfactant composed of POE (20) Sorbitan Monolaurate. It is suggested for use as an emulsifier, viscosity modifier, and lubricant. | |
| Lonzest® SMO | Arxada | Lonzest® SMO is a low HLB surfactant composed of Sorbitan Oleate. It is suggested for use as a W/O emulsifier or as an O/W emulsifier in conjunction with an auxiliary surfactant. This product can also be used as a lubricant and emulsifier component. | |
| Lonzest® SMO-20 | Arxada | Lonzest® SMO-20 is a Polsorbate 80, POE (20) Sorbitan Monooleate product supplied as a clear, amber liquid. It can be used as an emulsifier or as a lubricant. | |
| Lonzest® SMO-5 | Arxada | Lonzest® SMO-5 is a general purpose mid-range HLB, ethoxylated, nonionic surfactant. It is suggested for use as an O/W emulsifier and lubricant in synthetic fiber finish oil formulations. | |
| Lonzest® STO-20 LM | Arxada | Lonzest® STO-20 LM is a low moisture version of Lonzest STO-20. It is a nonionic surfactant suggested for use as a lubricant and emulsifier. | |
| Lonzest® TAO | Arxada | Lonzest® TAO is a mixture of Sorbitan Monotallate and tall oil fatty acid. It is a clear amber liquid that can be used as an emulsifier or lubricant. | |
| Omacide® IPBC 100 Fungicide | Arxada | Omacide® IPBC 100 Fungicide is a highly-effective broad-spectrum fungicide suitable for the preservation of a variety of solvent based industrial products, including architectural coatings, wood stains and construction materials, against spoilage from fun...view more Omacide® IPBC 100 Fungicide is a highly-effective broad-spectrum fungicide suitable for the preservation of a variety of solvent based industrial products, including architectural coatings, wood stains and construction materials, against spoilage from fungi & yeasts. view less | |
| Omacide® IPBC 30 Fungicide | Arxada | Omacide® IPBC 30 Fungicide imparts dry film protection against fungal growth when formulated in exterior paints and coatings, wood stains, adhesives, caulks, sealants, paper coatings, textiles, and plastics. | |
| Pegosperse® 400 DL | Arxada | Pegosperse® 400 DL is nonionic and compatible with cationic, amphoteric, anionic, and nonionic surface active agents. It is a versatile surface active agent suggest for use as an emulsifier, viscosity modifier, and lubricant. | |
| Pegosperse® 400 DO | Arxada | Pegosperse® 400 DO is nonionic and compatible with cationic, amphoteric, anionic, and nonionic surface active agents. It is a versatile surface active agent suggested for use in metal working and lubricant applications. | |
| Pegosperse® 400 DOT | Arxada | Pegosperse® 400 DOT is nonionic and compatible with cationic, amphoteric, anionic and nonionic surface active agents. It is a tall oil-based surfactant for use as an emulsifier. | |
| Pegosperse® 400 MC | Arxada | Pegosperse® 400 MC is a surface active agent with a high HLB. It is suggested for use as an emulsifier and lubricant. | |
| Pegosperse® 400 ML | Arxada | Pegosperse® 400 ML is nonionic and compatible with cationic, amphoteric, anionic, and nonionic surface active agents. It is a surface active agent with high HLB, suggested for use as an emulsifier and lubricant. | |
| Pegosperse® 400 MO | Arxada | Pegosperse® 400 MO is nonionic and compatible with cationic, amphoteric, anionic, and nonionic surface active agents. It is a mid-range HLB surfactant suggested as a cutting oil and solvent emulsifier, as well as a lubricant and scouring agent. | |
| Pegosperse® 400 MOT | Arxada | Pegosperse® 400 MOT is nonionic and compatible with cationic, amphoteric, anionic and nonionic surface active agents. It is a tall oil based surfactant for use as an emulsifier. | |
| Pegosperse® 600 DO | Arxada | Pegosperse® 600 DO is nonionic and compatible with cationic, amphoteric, anionic and nonionic surface active agents. It is a surfactant suggested for use as an emulsifier and lubricant. | |
| Pegosperse® 600 DOT | Arxada | Pegosperse® 600 DOT is nonionic and compatible with cationic, amphoteric, anionic and nonionic surface active agents. It is a tall oil based surfactant suggested for use as an emulsifier. | |
| Pegosperse® 600-MO | Arxada | Pegosperse® 600-MO is a PEG ester of Oleic acid. It acts as a dispersant, emulsifier, solubilizer, detergent and dye leveling agent for cosmetic and industrial applications. It can also be used as an antistatic agent in plastics. | |
| Polyaldo® 10-4-O | Arxada | Polyaldo® 10-4-O is a vegetable derived surfactant and emulsifying agent. It is composed of Decaglycerol Tetraoleate. | |
| Polyaldo® DGDO KFG (Non GMO) | Arxada | Polyaldo® DGDO Kosher is composed of Decaglyceryl Decaoleate. It is an effective antifoamer and defoamer. | |
| Proxel™ DCB Preservative | Arxada | Proxel™ DCB Preservative is broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi that has been specially formulated to provide good preservation at levels of 0.12% and below. It...view more Proxel™ DCB Preservative is broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi that has been specially formulated to provide good preservation at levels of 0.12% and below. It is effective in polymer emulsions, paints, adhesives, and pigment dispersions. view less | |
| Proxel™ GXL Preservative | Arxada | Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, text...view more Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. view less | |
| Proxel™ TN Preservative | Arxada | Proxel™ TN Preservative is an efficient preservative for aqueous compositions such as latex emulsions, paint, oil in water emulsions, adhesives, tape joint compounds, and pigment dispersions. | |
| SODIUM OMADINE™ 2000 Antimicrobial | Arxada | SODIUM OMADINE™ 2000 Antimicrobial is a broad spectrum antimicrobial designed to combat both bacteria and fungi commonly found in contaminated metalworking fluid systems. The product is a proprietary blend based on the chemical active sodium pyrithione an...view more SODIUM OMADINE™ 2000 Antimicrobial is a broad spectrum antimicrobial designed to combat both bacteria and fungi commonly found in contaminated metalworking fluid systems. The product is a proprietary blend based on the chemical active sodium pyrithione and does not contain or release formaldehyde. This versatile antimicrobial eliminates the need for treating systems with two separate biocides to address bacterial and fungal contamination view less | |
| SODIUM OMADINE™ 40% Fungicide | Arxada | SODIUM OMADINE™ 40% Fungicide is a highly active, broad-spectrum antimicrobial agent that, when used at recommended concentrations, can help to prevent and minimize problems associated with fungal contamination. It is the 40% aqueous sodium salt derivativ...view more SODIUM OMADINE™ 40% Fungicide is a highly active, broad-spectrum antimicrobial agent that, when used at recommended concentrations, can help to prevent and minimize problems associated with fungal contamination. It is the 40% aqueous sodium salt derivative of pyrithione. view less | |
| TRIADINE™ 3 Antimicrobial | Arxada | TRIADINE™ 3 Antimicrobial is an effective antimicrobial that is used to inhibit the growth of a broad spectrum of both Gram negative and Gram positive bacteria in aqueous-based metalworking fluids | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less |  |
| SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER | Anton Paar Viscosity & Rheology | The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...view more The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. view less |  |
