| AACH-7172 | Elementis |
|
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and...view more
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and also contributes to reduced visible white residue. Normal application will provide a minimum of 24 hours wetness and odor protection. view less
Compliance Highlights Unavailable
|
|
| AAZG-531 | Elementis |
|
AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.
Compliance Highlights Available
|
|
| AAZG-7167 | Elementis |
|
AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.
Compliance Highlights Available
|
|
| ACH-321 | Elementis |
|
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shi...view more
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shipping weight. view less
Compliance Highlights Unavailable
|
|
| Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
| AMIN GC95F | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN GC95F is an amino-acid type surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). Creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after was...view more
AMIN GC95F is an amino-acid type surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). Creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after washing without feeling taut.
Product properties include no irritation or hypersusceptibility, has outstanding foamability and good biodegradation. It can be applied in body wash for sensitive skin, shampoo for damaged hair, facial cleanser, baby products, shaving product, O/W co-emulsifier and toothpaste. It’s widely used in shampoo, facial cleanser, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
| AMIN GCK30 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN GCK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, and no hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It is widely ...view more
AMIN GCK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, and no hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It is widely applied in body washes for sensitive skin, shampoo for damaged hair, facial cleanser, soft soap, shaving products, O/W Co-emulsifiers, toothpaste and baby shampoo. view less
Compliance Highlights Available
|
|
| AMIN GCNa | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN GCNa is an amino-acid-derivative surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). This creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin...view more
AMIN GCNa is an amino-acid-derivative surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). This creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after washing without feeling taut. It is a very mild and hypoallergenic and has good biodegradation. It is widely applied in toothpaste, body wash for sensitive skin, shampoo for damaged hair, facial cleanser, shaving products, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
| AMIN LG30 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LG30 is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applie...view more
AMIN LG30 is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in body washs for sensitive skin, shampoos for damaged hair, facial cleansers, shaving products, soft soaps and baby shampoos. view less
Compliance Highlights Available
|
|
| AMIN LGK30 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LGK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely appli...view more
AMIN LGK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in shampoos for damaged hair, body washs for sensitive skin, shaving products, facial cleansers, soft soaps and baby shampoos. view less
Compliance Highlights Available
|
|
| AMIN LGNa | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LGNa is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applie...view more
AMIN LGNa is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in body wash for sensitive skin, shampoo for damaged hair, facial cleanser, shaving products, toothpaste, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
| AMIN LS | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LS is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product has good resistance to salty-water ...view more
AMIN LS is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product has good resistance to salty-water and hard-water and leaves hair feel soft with manageability. It’s widely applied in hand soaps, body washes, shampoos, shaving products, oral cleansers, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
| AMIN LS30 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LS30 is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamability. This product is milder then SLES by 7 times w...view more
AMIN LS30 is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamability. This product is milder then SLES by 7 times with good resistance to salty-water and hard-water. Applications include hand soap, body wash, shampoo, shaving cream, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
| AMIN LSNa | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMIN LSNa is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product stabilizes in pH 5.5 to alkali an...view more
AMIN LSNa is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product stabilizes in pH 5.5 to alkali and impart hair soft-feeling and manageability to hair. It’s widely applied in hand soaps, body washes, shampoos, shaving products, oral cleansers, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
| AMPHOT 702 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AMPHOT 702 is an amphoteric styling resin, with similar structure to hair which leads to excellent styling ability and affinity to hair. It can form a layer of flexible and lasting natural film on hair, help hairstyle long-playing with little dandruff. Th...view more
AMPHOT 702 is an amphoteric styling resin, with similar structure to hair which leads to excellent styling ability and affinity to hair. It can form a layer of flexible and lasting natural film on hair, help hairstyle long-playing with little dandruff. This product has good performance even under high-humidity conditions or in rainy days. Applied in styling gels, styling sprays, mousse, leave-in conditioners and hair tonic. view less
Compliance Highlights Unavailable
|
|
| AQUAGEL 35 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AQUAGEL 35 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. This product maintains viscosity under UV radiation and resists shearing for a long t...view more
AQUAGEL 35 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. This product maintains viscosity under UV radiation and resists shearing for a long time. Applications include creams, lotions, creamy gels, make-up foundation, sunscreen cream, formulas containing polar solvents, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
| AQUAGEL 45 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AQUAGEL 45 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allow you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. It is re...view more
AQUAGEL 45 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allow you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. It is recommended to be applied in cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
| AQUAGEL 55 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AQUAGEL 55 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. This pr...view more
AQUAGEL 55 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. This product will maintain viscosity under UV radiation while resisting shearing for a long amount of time. It is recommended to be applied in cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
| AQUAGEL 65 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
AQUAGEL 65 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil. Ideal for application in styling gel, cream, lotion...view more
AQUAGEL 65 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil. Ideal for application in styling gel, cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
| AQUAGEL C50 | Guangzhou Tinci Materials Technology Co.,Ltd. |
AQUAGEL C50 is a cationic acrylamide-based polymer which can be used as thickener and softener in acidic system. It is easy to use, can be added in any procedure during the preparation, do not need heat or neutralization. It is suitable for fabric softene...view more
AQUAGEL C50 is a cationic acrylamide-based polymer which can be used as thickener and softener in acidic system. It is easy to use, can be added in any procedure during the preparation, do not need heat or neutralization. It is suitable for fabric softener and home care products. view less
Compliance Highlights Unavailable
|
||
| AZG-364 | Elementis |
|
AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.
Compliance Highlights Available
|
|
| AZG-368 | Elementis |
|
AZG-368 is an aqueous solution of standard aluminum zirconium tetrachlorohydrex glycine that out- performs Al-only actives. AZG-368 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as aqueous creams and clear gels.
Compliance Highlights Available
|
|
| AZG-370 | Elementis |
|
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in ...view more
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in anhydrous suspension sticks, roll-ons and soft solids. view less
Compliance Highlights Available
|
|
| AZG-442 | Elementis |
|
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqu...view more
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqueous creams. view less
Compliance Highlights Available
|
|
| BENTONE GEL® 1002 V | Elementis |
|
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL...view more
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® 1002 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® 1002 V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ABO V | Elementis |
|
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil ha...view more
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil has a unique molecular sructure with a high percentage of unsaturated C22 fatty acids. It is a non-greasy oil providing an elegant cushioning skin feel and a natural luster, lubricity and softeness to hair, as well as aiding pigment dispersion in decorative cosmetics. BENTONE GEL® ABO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ABO V is an excellent alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® CAO V | Elementis |
|
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® ...view more
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® CAO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® DM5 V | Elementis |
|
BENTONE GEL® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone.
Compliance Highlights Unavailable
|
|
| BENTONE GEL® EUG V | Elementis |
|
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also pa...view more
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® EUG V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® GTCC V | Elementis |
|
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BE...view more
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® GTCC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® GTCC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® HS V | Elementis |
|
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control ...view more
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IHD V | Elementis |
|
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is ...view more
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IHD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IPM V | Elementis |
|
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based...view more
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IPM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ISD V | Elementis |
|
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is...view more
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ISD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® LC V | Elementis |
|
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological cont...view more
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the oil phase of cosmetics. It is an easily spreadable, volatile and non-oily emollient, which leaves a soft, non-tacky skin feel. view less
Compliance Highlights Available
|
|
| BENTONE GEL® LIP V | Elementis |
|
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed...view more
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. BENTONE GEL® LIP V provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances aesthetics by masking greasy and tacky components and imparts a pleasant residual silkiness on the skin. BENTONE GEL® LIP V is especially designed to impart cushion and slip to lip products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V | Elementis |
|
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is a...view more
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V HV | Elementis |
|
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particula...view more
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V HV is an alternative to traditional polymer or cellulose-based thickeners
for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OLV V | Elementis |
|
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTON...view more
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTONE GEL® OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OLV V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OMS V | Elementis |
|
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V i...view more
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OMS V is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTIS V | Elementis |
|
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to i...view more
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films. BENTONE GEL® PTIS V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin, enhances UV protection in sunscreens. BENTONE GEL® PTIS V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTM V | Elementis |
|
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheologica...view more
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky, skin feel and improves the gloss and softness of hair. BENTONE GEL® PTM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® PTM V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® SS71 V | Elementis |
|
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rholog...view more
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rhological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® SS71 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® SS71 V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® TN V | Elementis |
|
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also par...view more
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® TN V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V | Elementis |
|
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-...view more
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-5 PC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V HV | Elementis |
|
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also par...view more
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V | Elementis |
|
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V ...view more
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V is an alternative to traditional polymer or cellulose -based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V HV | Elementis |
|
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also partic...view more
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS1 V | Elementis |
|
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological contro...view more
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. BENTONE GEL® VS1 V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS1 V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 1100 | Elementis |
|
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control witho...view more
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity.
BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2000 | Elementis |
|
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirem...view more
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2001 | Elementis |
|
BENTONE HYDROCLAY™ 2001 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2100 | Elementis |
|
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension con...view more
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 550 | Elementis |
|
BENTONE HYDROCLAY™ 550 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 900 | Elementis |
|
BENTONE HYDROCLAY™ 900 is an organically-modified hectorite clay additive designed for the water phase of cosmetics. It's a highly efficient thickener providing significantly higher viscosity than other clay-based additives.
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WN | Elementis |
|
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE ...view more
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WO | Elementis |
|
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a...view more
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE® LUXE WO ideal for all skin types. BENTONE® LUXE WO can be used in color cosmetics or sunscreens to disperse and suspend pigments and actives. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WS | Elementis |
|
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. I...view more
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. It improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This grade is designed to impart rheological control and suspension to silicone-based cosmetics and emulsion systems. It provides thermostable viscosity control of the emulsion's oil phase. It aids in dispersing pigments and sunscreen actives for even coverage. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE XO | Elementis |
|
BENTONE® LUXE XO provides emulsification and rheological properties for silicone free water in oil systems. It also creates extremely stable emulsions with the ability to create a variety of textures.
Compliance Highlights Available
|
|
| BETAFAN™ M | Elementis |
|
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine sys...view more
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine systems (e.g. alpha olefin sulfonates) tend to irritate because they defat tissue. Therefore, formulators add unsaturated molecules such as oleyl amides and oleyl betaines to mitigate the irritation, but these materials tend to oxidize to aldehydes and do not smell good. As a result, high fragrance levels are required. BETAFAN-M systems reduce this effect. BETAFAN™ M can be used in surfactant and nonsurfactant systems for effective conditioning. view less
Compliance Highlights Unavailable
|
|
| C'ESTER 1215 UVA | Ethox Chemicals |
|
C’ESTER 1215 UVA significantly boosts the UVA and UVB absorbance of avobenzone without diminishing the critical wavelength (383nm) compared to conventional C12-15 alkyl benzoate.
This means that C’ESTER 1215 UVA not only boosts SPF but also provides grea...view more
C’ESTER 1215 UVA significantly boosts the UVA and UVB absorbance of avobenzone without diminishing the critical wavelength (383nm) compared to conventional C12-15 alkyl benzoate.
This means that C’ESTER 1215 UVA not only boosts SPF but also provides greater broad spectrum protection in combination with avobenzone. C’ESTER 1215 UVA is a novel patent pending ester derived from C12-15 alcohols and benzoic acid. It is fast spreading, reduces tack & drag and delivers a dry lubricious feel. It is an excellent solvent for lipophilic raw materials especially sunscreens. In hair care products it provides improved wet and dry combing. C’ESTER 1215 UVA is useful in a wide range of cosmetic and personal care products including OTC drug products. It is insoluble in water with a required HLB of about 11-13. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER 25 BENZOATE | Ethox Chemicals |
|
C’ESTER 25 BENZOATE is an ester derived from C12-15 alcohols and benzoic acid. It is fast spreading, reduces tack & drag and delivers a dry lubricious feel. C’ESTER 25 BENZOATE is an excellent solvent for lipophilic raw materials especially sunscreens. In...view more
C’ESTER 25 BENZOATE is an ester derived from C12-15 alcohols and benzoic acid. It is fast spreading, reduces tack & drag and delivers a dry lubricious feel. C’ESTER 25 BENZOATE is an excellent solvent for lipophilic raw materials especially sunscreens. In hair care products, it provides improved wet and dry combing. C’ESTER 25 BENZOATE is useful in a wide range of cosmetic and personal care products including OTC drug products. It is insoluble in water with a required HLB of about 11-13. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER BO | Ethox Chemicals |
|
C’ESTER BO is an ester derived from butyl alcohol and oleic acid. It is an emollient, lubricant, solvent and skin conditioning agent. It has a rich feel and leaves skin soft and smooth. C’ESTER BO is useful in a wide range of hair care and skin care produ...view more
C’ESTER BO is an ester derived from butyl alcohol and oleic acid. It is an emollient, lubricant, solvent and skin conditioning agent. It has a rich feel and leaves skin soft and smooth. C’ESTER BO is useful in a wide range of hair care and skin care products including sunscreens and suncare products. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER CP | Ethox Chemicals |
|
C’ESTER CP is the fatty acid ester derived from cetyl alcohol and palmitic acid. It is a fully saturated, waxy-solid that is a non-aqueous emollient, skin conditioning agent, and occlusive film former. On skin, C’ESTER CP is lubricious and provides a soft...view more
C’ESTER CP is the fatty acid ester derived from cetyl alcohol and palmitic acid. It is a fully saturated, waxy-solid that is a non-aqueous emollient, skin conditioning agent, and occlusive film former. On skin, C’ESTER CP is lubricious and provides a soft, smooth appearance. It also imparts body to formulations, can improve the stability of emulsions, and is a binding agent for powders. C’ESTER CP has a required HLB of about 9-11. view less
Compliance Highlights Unavailable
|
Request Sample |
| C'ESTER DA | Ethox Chemicals |
|
C’ESTER DA is an ester derived from butyl alcohol and adipic acid and is fully saturated. It is an excellent solvent for crystalline UV filters. C’ESTER DA is a liquid non-aqueous emollient, skin conditioning agent, and solvent. It has a lubricious feel w...view more
C’ESTER DA is an ester derived from butyl alcohol and adipic acid and is fully saturated. It is an excellent solvent for crystalline UV filters. C’ESTER DA is a liquid non-aqueous emollient, skin conditioning agent, and solvent. It has a lubricious feel which leaves skin with a soft and smooth appearance. C’ESTER DA is an emollient useful in a wide range of skin care products including sunscreens and suncare products. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER DOA | Ethox Chemicals |
|
C’ESTER DOA is an ester derived from 2-ethyhexyl alcohol and adipic acid. It is branched and fully saturated. C’ESTER DOA is a liquid emollient, skin conditioning agent, solvent, and emollient. It has a lubricious feel which leaves skin with a soft and sm...view more
C’ESTER DOA is an ester derived from 2-ethyhexyl alcohol and adipic acid. It is branched and fully saturated. C’ESTER DOA is a liquid emollient, skin conditioning agent, solvent, and emollient. It has a lubricious feel which leaves skin with a soft and smooth appearance. C’ESTER DOA is a non-occlusive emollient useful in a wide range of skin care products. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER EHO | Ethox Chemicals |
|
C’ESTER EHO is an ester of oleic acid and 2-ethylhexyl alcohol which is completely saturated making it very stable and compatible with all types of oils and actives. It is a naturally derived, medium spreading emollient which provides excellent slip and l...view more
C’ESTER EHO is an ester of oleic acid and 2-ethylhexyl alcohol which is completely saturated making it very stable and compatible with all types of oils and actives. It is a naturally derived, medium spreading emollient which provides excellent slip and lubricity and reduces drag. C’ESTER EHO is an alternative to silicones including dimethicone, cyclopentasilonane, and cyclohexacyloxane. It is a liquid nonaqueous skin conditioning agent, film former, plasticizer, and solvent that is useful in a wide range of personal care products and cosmetics. view less
Compliance Highlights Unavailable
|
Request Sample |
| C'ESTER EHP | Ethox Chemicals |
|
C’ESTER EHP is the fatty acid ester derived from 2-ethyhexyl alcohol and palmitic acid. It is branched and fully saturated. C’ESTER EHP is a liquid emollient, skin conditioning agent and solvent. On skin, it has a dry-slip feel that is similar to some sil...view more
C’ESTER EHP is the fatty acid ester derived from 2-ethyhexyl alcohol and palmitic acid. It is branched and fully saturated. C’ESTER EHP is a liquid emollient, skin conditioning agent and solvent. On skin, it has a dry-slip feel that is similar to some silicones. C’ESTER EHP is a medium spreading non-occlusive emollient useful in a wide range of skin care products and can be used as a replacement for mineral oil. It has a required HLB of about 7-9. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER EHS | Ethox Chemicals |
|
C’ESTER EHS is the fatty acid ester derived from 2-ethyhexyl alcohol and stearic acid. It is branched and fully saturated. C’ESTER EHS is a liquid emollient, skin conditioning agent, solvent, and emollient. It has a lubricious feel which leaves skin with ...view more
C’ESTER EHS is the fatty acid ester derived from 2-ethyhexyl alcohol and stearic acid. It is branched and fully saturated. C’ESTER EHS is a liquid emollient, skin conditioning agent, solvent, and emollient. It has a lubricious feel which leaves skin with a soft and smooth appearance, and helps prevent water loss. C’ESTER EHS is a medium spreading non-occlusive emollient useful in a wide range of skin care products and can be used as a replacement for mineral oil. It has a required HLB of about 7-9. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER MCT | Ethox Chemicals |
|
C’ESTER MCT is a saturated triglyceride or triester of glycerin with caprylic and capric acids. It is a very stable ester that has excellent lubricity and emolliency properties. Because C’ESTER MCT forms an occlusive barrier, it is an ideal choice for all...view more
C’ESTER MCT is a saturated triglyceride or triester of glycerin with caprylic and capric acids. It is a very stable ester that has excellent lubricity and emolliency properties. Because C’ESTER MCT forms an occlusive barrier, it is an ideal choice for all moisturizers. It is non-oily, light in color, has low odor and possesses a very low viscosity. C’ESTER MCT is suggested as a carrier, a co-solvent or coupling agent and as an emollient in cream and lotion formulations. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER MM | Ethox Chemicals |
|
C’ESTER MM is a 100% natural, vegetable-derived ester, made from myristyl alcohol and myristic acid with a required HLB of about 7.5-9.5. It delivers superior whitening and a silky, rich feel to products and improved benefits to the skin. C’ESTER MM is us...view more
C’ESTER MM is a 100% natural, vegetable-derived ester, made from myristyl alcohol and myristic acid with a required HLB of about 7.5-9.5. It delivers superior whitening and a silky, rich feel to products and improved benefits to the skin. C’ESTER MM is useful as a thickening agent, opacifier, and skin conditioning agent. It leaves a pleasant, powdery-soft after feel and helps moisture retention of skin. C’ESTER MM also has the benefit of stabilizing emulsions making them more stable to temperature variations and higher oil loads. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER NBS VPP | Ethox Chemicals |
|
C’ESTER NBS VPP is a plant-derived, butyl ester of stearic acid. It works well as a conditioning agent and solvent with a soft, light, lubricious skin-feel. C’ESTER NBS VPP forms a non-greasy, hydrophobic film when applied to the skin. It decreases the th...view more
C’ESTER NBS VPP is a plant-derived, butyl ester of stearic acid. It works well as a conditioning agent and solvent with a soft, light, lubricious skin-feel. C’ESTER NBS VPP forms a non-greasy, hydrophobic film when applied to the skin. It decreases the thickness of lipsticks, making them glide easier. C’ESTER NBS VPP is a good plasticizer for nail enamels and styling aids. view less
Compliance Highlights Unavailable
|
Request Sample |
| C'ESTER PB-4P | Ethox Chemicals |
|
C’ESTER PB-4P is a tetraester of pentaerythritol and behenic acid. It is a solid non-aqueous emollient, occlusive skin conditioning agent and viscosifier. On skin, C’ESTER PB-4P leaves a powdery matte finish with no drying sensation and in hair styling pr...view more
C’ESTER PB-4P is a tetraester of pentaerythritol and behenic acid. It is a solid non-aqueous emollient, occlusive skin conditioning agent and viscosifier. On skin, C’ESTER PB-4P leaves a powdery matte finish with no drying sensation and in hair styling products it provides long lasting hold. view less
Compliance Highlights Available
|
Request Sample |
| C’ESTER PHSA-6 | Ethox Chemicals |
|
C’ESTER PHSA-6 is a naturally-derived homopolymer of hydroxystearic acid. It works well as a film former, emollient, and dispersing agent for all types of pigment dispersions. It is a highly effective dispersant for the inorganic sunscreens TiO2 and ZnO. ...view more
C’ESTER PHSA-6 is a naturally-derived homopolymer of hydroxystearic acid. It works well as a film former, emollient, and dispersing agent for all types of pigment dispersions. It is a highly effective dispersant for the inorganic sunscreens TiO2 and ZnO. C’ESTER PHSA-6 can increase UV absorption resulting in cost savings from being able to use less sunscreen for a given level of protection. It also reduces whitening and improves optical transparency. C’ESTER PHSA-6, even at low levels, can significantly decrease the viscosity of dispersions allowing for the use of pigments at higher levels. view less
Compliance Highlights Unavailable
|
Request Sample |
| C'ESTER PLPHS | Ethox Chemicals |
C’ESTER PLPHS is a naturally derived aliphatic copolyester for sunscreen, skincare, and hair care products. C’ESTER PLPHS forms a film that improves the moisture resistance of products and aids in the dispersion of pigments. Hair Care products, it offers ...view more
C’ESTER PLPHS is a naturally derived aliphatic copolyester for sunscreen, skincare, and hair care products. C’ESTER PLPHS forms a film that improves the moisture resistance of products and aids in the dispersion of pigments. Hair Care products, it offers styling hold. C’ESTER PLPHS is thermally stable to 260C as determined by thermogravimetric analysis. view less
Compliance Highlights Unavailable
|
Request Sample | |
| C'ESTER PLPR | Ethox Chemicals |
|
C’ESTER PLPR is a naturally derived aliphatic copolyester for sunscreen, skincare, and hair care products. C’ESTER PLPR forms a film that improves the moisture resistance of products and aids in the dispersion of pigments. In Hair Care products, it offers...view more
C’ESTER PLPR is a naturally derived aliphatic copolyester for sunscreen, skincare, and hair care products. C’ESTER PLPR forms a film that improves the moisture resistance of products and aids in the dispersion of pigments. In Hair Care products, it offers styling hold. C’ESTER PLPR is thermally stable to 260C as determined by thermogravimetric analysis. view less
Compliance Highlights Unavailable
|
Request Sample |
| C'ESTER PTIS | Ethox Chemicals |
|
C’ESTER PTIS is a tetraester of pentaerythritol and isostearic acid. It is a 100% active, fully saturated, branched, long chain, liquid emollient that is non-comedogenic. C’ESTER PTIS is a water repellent skin conditioning agent and viscosifier. On skin, ...view more
C’ESTER PTIS is a tetraester of pentaerythritol and isostearic acid. It is a 100% active, fully saturated, branched, long chain, liquid emollient that is non-comedogenic. C’ESTER PTIS is a water repellent skin conditioning agent and viscosifier. On skin, it provides excellent cushion and leaves a soft after feel. C’ESTER PTIS is slow spreading and is an aesthetically pleasing replacement for castor oil. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER TDS | Ethox Chemicals |
|
C’ESTER TDS is the ester of tridecyl alcohol and stearic acid. It is a fast-absorbing emollient that leaves no shine. It has a dry, non-greasy feel on application with an elegant, velvety after-feel. C’ESTER TDS has a required HLB of about 6-9.
Compliance Highlights Available
|
Request Sample |
| C'ESTER TDTM | Ethox Chemicals |
|
C’ESTER TDTM is a mineral oil replacement. It is a substantive film forming emollient that provides cushion and lubricity even at low levels with a very soft after feel. C’ESTER TDTM is ideally suited for use in facial cleansing creams and skin treatment ...view more
C’ESTER TDTM is a mineral oil replacement. It is a substantive film forming emollient that provides cushion and lubricity even at low levels with a very soft after feel. C’ESTER TDTM is ideally suited for use in facial cleansing creams and skin treatment products. It is an excellent pigment dispersant allowing for high pigment loads making it an ideal choice for lipsticks, foundations and other makeup formulations. C’ESTER TDTM is a viscous liquid that is soluble in most oils and insoluble in water. view less
Compliance Highlights Available
|
Request Sample |
| C'ESTER V | Ethox Chemicals |
|
C’ESTER V is a vegetable-based monoester made of decyl alcohol and oleic acid. It is a medium to fast spreading emollient with a required HLB of about 10-13. C’ESTER V leaves a non-oily velvet feel and has the ability to reduce the tackiness of heavier oi...view more
C’ESTER V is a vegetable-based monoester made of decyl alcohol and oleic acid. It is a medium to fast spreading emollient with a required HLB of about 10-13. C’ESTER V leaves a non-oily velvet feel and has the ability to reduce the tackiness of heavier oils in a formulation. view less
Compliance Highlights Unavailable
|
Request Sample |
| CETETH 25 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
CETETH 25 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 6. It can resist inorganic salt, high or low pH, and it imparts finished product of high stabil...view more
CETETH 25 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 6. It can resist inorganic salt, high or low pH, and it imparts finished product of high stability and fine appearance. Ideal for application in cream, lotion, hair color cream and hair remover cream. view less
Compliance Highlights Available
|
|
| CETETH 6 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
CETETH 6 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 25. It can resist inorganic salt, high or low pH, and it imparts finished product of high stabil...view more
CETETH 6 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 25. It can resist inorganic salt, high or low pH, and it imparts finished product of high stability and fine appearance. Ideal for application in cream, lotion, hair color cream and depilatory cream. view less
Compliance Highlights Available
|
|
| CHLORHYDROL 50 | Elementis |
|
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and cle...view more
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and clear pump sprays. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| EA-3105 | Elementis |
|
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly use...view more
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly useful in emulsions and can be used in ""cold process"" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. EA-3105 is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| EMUL 33 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
EMUL 33 is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked. It's easy to handle due to water-soluble and low-viscosity. It is resistant to salt and stable to solvent and peroxide when combined with an...view more
EMUL 33 is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked. It's easy to handle due to water-soluble and low-viscosity. It is resistant to salt and stable to solvent and peroxide when combined with anionic and non-ionic surfactants. Recommended for application in pearly shampoo, pearly body wash, conditioning products, conditioning shampoo, moisturizing body wash, foundation cream, lotion, sunscreen cream and hair dye. view less
Compliance Highlights Available
|
|
| EMUL 34 | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
EMUL 34 is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked. It's easy to handle due to water-soluble and low-viscosity. This product provides stabilizing, thickening and co-emulsifying functions. Idea...view more
EMUL 34 is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked. It's easy to handle due to water-soluble and low-viscosity. This product provides stabilizing, thickening and co-emulsifying functions. Ideal for application in pearly shampoo, pearly body wash, conditioning product, conditioning shampoo, moisturizing body wash, foundation cream, lotion and hair dye. view less
Compliance Highlights Available
|
|
| EMUL 34U | Guangzhou Tinci Materials Technology Co.,Ltd. |
|
EMUL 34U is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked and is easy to handle due to water-soluble and low-viscosity. This product provides stability, thickening and co-emulsifying functions. Reco...view more
EMUL 34U is an excellent rheology modifier, alkali-swellable anionic acrylic polymer emulsion, lightly crosslinked and is easy to handle due to water-soluble and low-viscosity. This product provides stability, thickening and co-emulsifying functions. Recommended for application in pearly shampoo, pearly body wash, conditioning product, conditioning shampoo, moisturizing body wash, foundation cream, lotion and hair dye. view less
Compliance Highlights Unavailable
|
|
| ETHOXCARE® 165V | Ethox Chemicals |
|
ETHOXCARE® 165V is self-emulsifying glyceryl stearate. It is a mixture of glyceryl monostearate and the polyethylene glycol ether of stearyl alcohol with an average of 100 repeating units of ethylene glycol. ETHOXCARE® 165V is a versatile nonionic O/W emu...view more
ETHOXCARE® 165V is self-emulsifying glyceryl stearate. It is a mixture of glyceryl monostearate and the polyethylene glycol ether of stearyl alcohol with an average of 100 repeating units of ethylene glycol. ETHOXCARE® 165V is a versatile nonionic O/W emulsifier for creams and lotions and has an HLB of about 10-12. Since it is a completely saturated solid material, it is very stable. ETHOXCARE® 165V is useful in a wide range of personal care products and cosmetics and is compatible with extremes of pH from about 5-9 and high levels of electrolytes. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® 4075 | Ethox Chemicals |
|
ETHOXCARE® 4075 is a 100% naturally-derived emollient and viscosity modifier for aqueous & non-aqueous systems. It is a multifunctional ingredient that modifies viscosity while moisturizing & conditioning, thus allowing the formulator to create innovative...view more
ETHOXCARE® 4075 is a 100% naturally-derived emollient and viscosity modifier for aqueous & non-aqueous systems. It is a multifunctional ingredient that modifies viscosity while moisturizing & conditioning, thus allowing the formulator to create innovative products with fewer ingredients. view less
Compliance Highlights Available
|
Request Sample |
| ETHOXCARE® 4216 | Ethox Chemicals |
|
ETHOXCARE® 4216 is a mixture of cetearyl alcohol and the polyethylene glycol ether of cetearyl alcohol with 20 repeating units of ethylene glycol. It simplifies the formulation of oil-in-water emulsions since it does not require the use of other emulsifie...view more
ETHOXCARE® 4216 is a mixture of cetearyl alcohol and the polyethylene glycol ether of cetearyl alcohol with 20 repeating units of ethylene glycol. It simplifies the formulation of oil-in-water emulsions since it does not require the use of other emulsifiers. ETHOXCARE® 4216 is useful in a wide range of personal care products and cosmetics and is compatible with extremes of pH and high levels of electrolytes. It produces very stable emulsions with excellent feel and appearance. Since ETHOXCARE® 4216 is a completely saturated solid material, it is very stable. view less
Compliance Highlights Available
|
Request Sample |
| ETHOXCARE® 4414 | Ethox Chemicals |
|
ETHOXCARE® 4414 is a naturally derived product. It is an excellent film former. In creams and lotions, it provides a moisture barrier and water resistance. In skin care and hair care products, it provides a protective film. In color cosmetics, it improves...view more
ETHOXCARE® 4414 is a naturally derived product. It is an excellent film former. In creams and lotions, it provides a moisture barrier and water resistance. In skin care and hair care products, it provides a protective film. In color cosmetics, it improves wear. In mascara, this ester will help decrease brittleness and cracking. ETHOXCARE® 4414 will help thicken oils. Use levels vary with application and composition but are generally in range of about 5-50% ester with 95-50% oil. It can be used to create gels and sticks with a wide range of materials including the following: mineral oil, mineral oil replacements, esters, and vegetable oils. ETHOXCARE® 4414, with its unique benefits, increases formulation versatility enabling the formulator to create products with novel aesthetics and improved performance. ETHOXCARE® 4414 is a lipophilic ester with a required HLB of about 8-10. It is insoluble in water, soluble in mineral oil, and partially soluble in alcohol. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® 4985 | Ethox Chemicals |
|
ETHOXCARE® 4985 is a mixture of cetearyl alcohol and a blend of polyethylene glycol ethers of cetyl and stearyl alcohol. It is a complete emulsion system that simplifies the formulation of oil-in-water emulsions since it can be simply added to the water p...view more
ETHOXCARE® 4985 is a mixture of cetearyl alcohol and a blend of polyethylene glycol ethers of cetyl and stearyl alcohol. It is a complete emulsion system that simplifies the formulation of oil-in-water emulsions since it can be simply added to the water phase and heated with mixing to create an emulsion. ETHOXCARE® 4985 is useful in a wide range of personal care products and cosmetics and is compatible with extremes of pH and high levels of electrolytes. It produces very stable emulsions with good body and opacity and provides conditioning properties. Since ETHOXCARE® 4985 is a completely saturated solid material, it is very stable. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® 5011 | Ethox Chemicals |
|
ETHOXCARE® 5011 is the polyethylene glycol ether of cetearyl alcohol with an average of 25 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions and a solubilizer. ETHOXCARE® 5011 is useful in a wide range of personal care pro...view more
ETHOXCARE® 5011 is the polyethylene glycol ether of cetearyl alcohol with an average of 25 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions and a solubilizer. ETHOXCARE® 5011 is useful in a wide range of personal care products and cosmetics and is compatible with all types of oils and actives. Since it is a completely saturated solid material, it is very stable and has an HLB of about 15-17. ETHOXCARE® 5011 can be combined with other surfactants to achieve any required HLB. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® 5089 | Ethox Chemicals |
|
ETHOXCARE® 5089 is the polyethylene glycol ether of cetearyl alcohol with an average of 20 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions and a solubilizer. ETHOXCARE® 5089 is useful in a wide range of personal care pro...view more
ETHOXCARE® 5089 is the polyethylene glycol ether of cetearyl alcohol with an average of 20 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions and a solubilizer. ETHOXCARE® 5089 is useful in a wide range of personal care products and cosmetics and is compatible with all types of oils and actives. Since it is a completely saturated solid material, it is very stable and has an HLB of about 15-17. ETHOXCARE® 5089 can be combined with other surfactants to achieve any required HLB. view less
Compliance Highlights Available
|
Request Sample |
| ETHOXCARE® 5213 | Ethox Chemicals |
|
ETHOXCARE® 5213 is a mixture of mono, di, and triglycerides derived from coconut oil that is a liquid at 25C. ETHOXCARE® 5213 is a nonionic skin-conditioning agent, moisturizer, and emollient. It is an ideal dispersant for physical sunscreens and other pi...view more
ETHOXCARE® 5213 is a mixture of mono, di, and triglycerides derived from coconut oil that is a liquid at 25C. ETHOXCARE® 5213 is a nonionic skin-conditioning agent, moisturizer, and emollient. It is an ideal dispersant for physical sunscreens and other pigments. ETHOXCARE® 5213 delivers instant and long-term moisturization and is useful in a wide range of personal care products and cosmetics. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® BTMS-25 | Ethox Chemicals |
|
ETHOXCARE® BTMS-25 is a blend of behentrimonium methosulfate and Cetearyl alcohol. This combination creates an emulsification system with unique characteristics. In creams and lotions, it can be used alone as the sole emulsifier. For systems that are diff...view more
ETHOXCARE® BTMS-25 is a blend of behentrimonium methosulfate and Cetearyl alcohol. This combination creates an emulsification system with unique characteristics. In creams and lotions, it can be used alone as the sole emulsifier. For systems that are difficult to emulsify, it is an excellent choice. ETHOXCARE® BTMS-25 can emulsify systems that contain high levels of silicone. Because it is cationic, it is substantive to hair and skin. Hair care, it delivers excellent conditioning and improves wet and dry combing. ETHOXCARE® BTMS-25 can be used to create rinse-off conditioners as well as leave-on conditioners and detangling sprays. In skin care, ETHOXCARE® BTMS-25 delivers a soft elegant after feel and in rinse-off products it facilitates deposition of other nonionic conditioners and moisturizers. view less
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® CA-2 | Ethox Chemicals |
|
ETHOXCARE® CA-2 is the polyethylene glycol ether of cetyl alcohol with an average of 2 repeating units of ethylene glycol. It is an emulsifier for water-in-oil emulsions and a secondary emulsifier for oil-in-water emulsions that is useful in a wide range ...view more
ETHOXCARE® CA-2 is the polyethylene glycol ether of cetyl alcohol with an average of 2 repeating units of ethylene glycol. It is an emulsifier for water-in-oil emulsions and a secondary emulsifier for oil-in-water emulsions that is useful in a wide range of personal care products and cosmetics. ETHOXCARE® CA-2 has an HLB of about 4-6 and can be combined with other surfactants to achieve any required HLB. It is a completely saturated material making it very stable and compatible with all types of oils and actives. view less
Compliance Highlights Available
|
Request Sample |
| ETHOXCARE® CA-20 | Ethox Chemicals |
|
ETHOXCARE® CA-20 is the polyethylene glycol ether of cetyl alcohol with an average of 20 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions that is useful in a wide range of personal care products and cosmetics. ETHOXCARE® ...view more
ETHOXCARE® CA-20 is the polyethylene glycol ether of cetyl alcohol with an average of 20 repeating units of ethylene glycol. It is an emulsifier for oil-in-water emulsions that is useful in a wide range of personal care products and cosmetics. ETHOXCARE® CA-20 has an HLB of about 14.5-16.5 and can be combined with other surfactants to achieve any required HLB. It is a completely saturated material making it very stable and compatible with all types of oils and actives. view less
Compliance Highlights Available
|
Request Sample |
| ETHOXCARE® CAM-2 | Ethox Chemicals |
|
ETHOXCARE® CAM-2 is a naturally derived emulsifier for W/O emulsions that is suitable for alkaline emulsions. ETHOXCARE® CAM-2 has an HLB value of about 5.0-7.0, and Natural Origin Index of 0.68.
Compliance Highlights Unavailable
|
Request Sample |
| ETHOXCARE® CO-16 | Ethox Chemicals |
|
ETHOXCARE® CO-16 is a naturally derived emulsifier and surfactant. It has an HLB value of about 7.5-9.5, and Natural Origin Index of 0.57.
Compliance Highlights Available
|
Request Sample |
