| AACH-7172 | Elementis |
|
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and...view more
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and also contributes to reduced visible white residue. Normal application will provide a minimum of 24 hours wetness and odor protection. view less
Compliance Highlights Unavailable
|
|
| AAZG-531 | Elementis |
|
AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.
Compliance Highlights Available
|
|
| AAZG-7167 | Elementis |
|
AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.
Compliance Highlights Available
|
|
| ACH-321 | Elementis |
|
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shi...view more
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shipping weight. view less
Compliance Highlights Unavailable
|
|
| Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
| AZG-364 | Elementis |
|
AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.
Compliance Highlights Available
|
|
| AZG-368 | Elementis |
|
AZG-368 is an aqueous solution of standard aluminum zirconium tetrachlorohydrex glycine that out- performs Al-only actives. AZG-368 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as aqueous creams and clear gels.
Compliance Highlights Available
|
|
| AZG-370 | Elementis |
|
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in ...view more
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in anhydrous suspension sticks, roll-ons and soft solids. view less
Compliance Highlights Available
|
|
| AZG-442 | Elementis |
|
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqu...view more
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqueous creams. view less
Compliance Highlights Available
|
|
| BENTONE GEL® 1002 V | Elementis |
|
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL...view more
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® 1002 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® 1002 V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ABO V | Elementis |
|
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil ha...view more
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil has a unique molecular sructure with a high percentage of unsaturated C22 fatty acids. It is a non-greasy oil providing an elegant cushioning skin feel and a natural luster, lubricity and softeness to hair, as well as aiding pigment dispersion in decorative cosmetics. BENTONE GEL® ABO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ABO V is an excellent alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® CAO V | Elementis |
|
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® ...view more
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® CAO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® DM5 V | Elementis |
|
BENTONE GEL® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone.
Compliance Highlights Unavailable
|
|
| BENTONE GEL® EUG V | Elementis |
|
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also pa...view more
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® EUG V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® GTCC V | Elementis |
|
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BE...view more
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® GTCC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® GTCC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® HS V | Elementis |
|
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control ...view more
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IHD V | Elementis |
|
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is ...view more
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IHD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IPM V | Elementis |
|
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based...view more
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IPM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ISD V | Elementis |
|
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is...view more
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ISD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® LC V | Elementis |
|
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological cont...view more
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the oil phase of cosmetics. It is an easily spreadable, volatile and non-oily emollient, which leaves a soft, non-tacky skin feel. view less
Compliance Highlights Available
|
|
| BENTONE GEL® LIP V | Elementis |
|
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed...view more
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. BENTONE GEL® LIP V provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances aesthetics by masking greasy and tacky components and imparts a pleasant residual silkiness on the skin. BENTONE GEL® LIP V is especially designed to impart cushion and slip to lip products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V | Elementis |
|
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is a...view more
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V HV | Elementis |
|
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particula...view more
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V HV is an alternative to traditional polymer or cellulose-based thickeners
for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OLV V | Elementis |
|
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTON...view more
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTONE GEL® OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OLV V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OMS V | Elementis |
|
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V i...view more
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OMS V is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTIS V | Elementis |
|
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to i...view more
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films. BENTONE GEL® PTIS V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin, enhances UV protection in sunscreens. BENTONE GEL® PTIS V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTM V | Elementis |
|
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheologica...view more
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky, skin feel and improves the gloss and softness of hair. BENTONE GEL® PTM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® PTM V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® SS71 V | Elementis |
|
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rholog...view more
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rhological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® SS71 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® SS71 V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® TN V | Elementis |
|
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also par...view more
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® TN V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V | Elementis |
|
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-...view more
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-5 PC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V HV | Elementis |
|
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also par...view more
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V | Elementis |
|
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V ...view more
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V is an alternative to traditional polymer or cellulose -based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V HV | Elementis |
|
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also partic...view more
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS1 V | Elementis |
|
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological contro...view more
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. BENTONE GEL® VS1 V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS1 V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 1100 | Elementis |
|
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control witho...view more
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity.
BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2000 | Elementis |
|
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirem...view more
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2001 | Elementis |
|
BENTONE HYDROCLAY™ 2001 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2100 | Elementis |
|
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension con...view more
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 550 | Elementis |
|
BENTONE HYDROCLAY™ 550 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 900 | Elementis |
|
BENTONE HYDROCLAY™ 900 is an organically-modified hectorite clay additive designed for the water phase of cosmetics. It's a highly efficient thickener providing significantly higher viscosity than other clay-based additives.
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WN | Elementis |
|
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE ...view more
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WO | Elementis |
|
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a...view more
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE® LUXE WO ideal for all skin types. BENTONE® LUXE WO can be used in color cosmetics or sunscreens to disperse and suspend pigments and actives. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WS | Elementis |
|
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. I...view more
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. It improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This grade is designed to impart rheological control and suspension to silicone-based cosmetics and emulsion systems. It provides thermostable viscosity control of the emulsion's oil phase. It aids in dispersing pigments and sunscreen actives for even coverage. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE XO | Elementis |
|
BENTONE® LUXE XO provides emulsification and rheological properties for silicone free water in oil systems. It also creates extremely stable emulsions with the ability to create a variety of textures.
Compliance Highlights Available
|
|
| BETAFAN™ M | Elementis |
|
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine sys...view more
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine systems (e.g. alpha olefin sulfonates) tend to irritate because they defat tissue. Therefore, formulators add unsaturated molecules such as oleyl amides and oleyl betaines to mitigate the irritation, but these materials tend to oxidize to aldehydes and do not smell good. As a result, high fragrance levels are required. BETAFAN-M systems reduce this effect. BETAFAN™ M can be used in surfactant and nonsurfactant systems for effective conditioning. view less
Compliance Highlights Unavailable
|
|
| CHLORHYDROL 50 | Elementis |
|
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and cle...view more
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and clear pump sprays. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| EA-3105 | Elementis |
|
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly use...view more
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly useful in emulsions and can be used in ""cold process"" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. EA-3105 is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| FANCOL® CB | Elementis |
|
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ab...view more
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ability to maintain a molded shape, while also mixed with other products. This combined with it melting at body temperature, allowing it to release actives, makes it a good product for suppositories. FANCOL® CB has an excellent stability profile. view less
Compliance Highlights Available
|
|
| FANCOL® HS3 US | Elementis |
|
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosm...view more
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosmetic industry. It has emollient, moisturizing and conditioning effects. It readily dissolves in water to produce a clear solution. It is valuable in shampoos and conditioners to impart softness and shine. view less
Compliance Highlights Unavailable
|
|
| FANCOL® LA SUPERFINE-P | Elementis |
|
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work...view more
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work with. FANCOL® LA SUPERFINE-P acts as an emulsifying agent for both o/w and w/o emulsions and can be used over a wide pH range. FANCOL® LA SUPERFINE-P has a high surface activity so can reduce interfacial tension of mineral oil/water. It can also significantly increase the water absorbing capacity of hydrocarbon systems. view less
Compliance Highlights Available
|
|
| FANCOL® LA-15 | Elementis |
|
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsify...view more
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsifying properties of Lanolin Alcohol are now available to create stable O/W emulsions or even microemulsions with fine emollient and spreading properties. It can couple Lanolin Oil into shampoo systems to provide emollience and conditioning to the hair after shampooing. As FANCOL® LA-15 is a nonionic material, it will show excellent stability coupled with powerful emulsifying properties under high acidic and highly alkaline conditions. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 250-CG | Elementis |
|
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofin...view more
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 250-CG can be used as a substitute for Mineral Oil. FANCO®L POLYISO® 250-CG provides lubricity. FANCOL POLYISO 250-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 275-CG | Elementis |
|
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing...view more
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 275-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 275-CG provides lubricity. FANCOL® POLYISO® 275-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 300-CG | Elementis |
|
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing...view more
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 300-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 300-CG provides lubricity. FANCOL® POLYISO® 300-CGcan be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 450-CG | Elementis |
|
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofin...view more
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 450-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 450-CG provides lubricity. FANCOL® POLYISO® 450-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 800-CG | Elementis |
|
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofin...view more
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 800-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 800-CG provides lubricity. FANCOL® POLYISO® 800-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® SHEA BUTTER | Elementis |
|
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA B...view more
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA BUTTER shows its ability to protect the skin from sun and helps to ease superficial skin irritation. Its oily qualities improve skin softness. FANCOL® SHEA BUTTER is an excellent skin conditioning agent, which melts at body temperature, giving it good spreadibility. FANCOL® SHEA BUTTER enhances shine and has excellent superfatting qualities. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOL® VB | Elementis |
|
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pig...view more
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pigment wetting properties. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCOR® ABYSSINIAN OIL | Elementis |
|
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percen...view more
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percentage of unsaturated C22 fatty acids. Furthermore, it is liquid at room temperature, even though it is of high molecular weight. FANCOR® ABYSSINIAN OIL is stable against heat breakdown and is highly resistant to oxidation.
FANCOR® ABYSSINIAN OIL has a high surface tension and gives good spreadability. It provides natural luster, lubricity and an emollient feeling to hair care products. FANCOR® ABYSSINIAN OIL provides excellent pigment wetting and is a very efficient pigment dispersant, which leaves behind an elegant cushioning skin feel. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOR® LANWAX | Elementis |
|
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty ...view more
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty esters of Cholesterol and other sterols. FANCOR® LANWAX is used in water in oil systems to provide firmness, emolliency, improved consistency and stability. As such, it finds wide use not only in creams and lotions, but also is most valuable in lip formulations. It will add acceptable tact to hair grooming preparations and will serve as a plasticizer in wax crayons. It is an excellent bodying agent.
FANCOR® LANWAX is valuable as a low cost replacer or extender for other natural waxes in all applications including the manufacturing of candles. Not only will it act as an emulsifier, but it also serves as a crystallization inhibitor for other waxes. In polishes it will help reduce slip without interfering with gloss. view less
Compliance Highlights Available
|
|
| FANCOR® MEADOWFOAM SEED OIL | Elementis |
|
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique...view more
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique molecular structure not found in any other naturally occurring substance. FANCOR® MEADOWFOAM SEED OIL contains approximately 95% fatty acids having chain lengths of 20-22 Carbon atoms. The typical fatty acid profile is as follows: C20:1(61%), C22:1(16%) and C22:2(18%). Most importantly, the unsaturated double bonds are located at the Δ5 and Δ13 position. Combination of lack of conjugated double bonds and carrying its natural antioxidant brings this oil extraordinary oxidative stability. Furthermore, it is liquid at room temperature regardless its high molecular weight. It is effective against heat breakdown and is resistant to oxidation. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-1 | Elementis |
|
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and t...view more
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule. FANCORSIL® LIM-1 is soluble in water. FANCORSIL® LIM-1 has excellent conditioning and moisturizing properties in both skin and haircare applications. FANCORSIL® LIM-1 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-1 can be used as a shine enhancer in decorative cosmetics and hair care products while also helping to build body to the formulation. FANCORSIL® LIM-1 does not depress foam, but adds density and more creaminess to the foam. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-2 | Elementis |
|
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and ...view more
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule.
FANCORSIL® LIM-2 is not soluble in water and is easily emulsified with hair and skin care systems to contribute lubricity without greasiness. FANCORSIL® LIM-2 has excellent conditioning and moisturizing properties in both skin and hair care leave-on applications. FANCORSIL® LIM-2 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-2 can be used as a shine enhancer in hair care products while also helping to build body to the formulation. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-100 | INEOS Oligomers |
|
Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more
Indopol® H-100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1200 | INEOS Oligomers |
|
Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1200 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-15 | INEOS Oligomers |
|
Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1500 | INEOS Oligomers |
|
Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1500 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-18000 | INEOS Oligomers |
|
Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-dryin...view more
Indopol® H-18000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-1900 | INEOS Oligomers |
|
Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-1900 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-2100 | INEOS Oligomers |
|
Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dr...view more
Indopol® H-2100 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-25 | INEOS Oligomers |
|
Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-300 | INEOS Oligomers |
|
Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-dry...view more
Indopol® H-300 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade has a honey-like consistency. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-50 | INEOS Oligomers |
|
Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-6000 | INEOS Oligomers |
|
Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying...view more
Indopol® H-6000 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a semi-solid material. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-7 | INEOS Oligomers |
|
Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® H-8 | INEOS Oligomers |
|
Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more
Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® L-14 | INEOS Oligomers |
|
Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more
Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Indopol® L-6 | INEOS Oligomers |
|
Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more
Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less
Compliance Highlights Unavailable
|
|
| Isododecane | INEOS Oligomers |
|
Isododecane is a clear, colorless, volatile, and odorless liquid. It provides a light, non-oily feel with little residue and excellent solvency. With a viscosity of approximately 1 centipoise, it can be used in applications which include: hair care, sun c...view more
Isododecane is a clear, colorless, volatile, and odorless liquid. It provides a light, non-oily feel with little residue and excellent solvency. With a viscosity of approximately 1 centipoise, it can be used in applications which include: hair care, sun care, antiperspirants, color cosmetics, mascaras and fragrance products. view less
Compliance Highlights Unavailable
|
|
| Isoeicosane | INEOS Oligomers |
|
Isoeicosane is a clear, colorless, and odorless liquid providing a satiny feel to the skin. The liquid can be used to produce a high sheen and can effectively plasticize mascaras. Applications for use include: skin care, hair care, sun care and color cosm...view more
Isoeicosane is a clear, colorless, and odorless liquid providing a satiny feel to the skin. The liquid can be used to produce a high sheen and can effectively plasticize mascaras. Applications for use include: skin care, hair care, sun care and color cosmetics. view less
Compliance Highlights Unavailable
|
|
| Isohexadecane | INEOS Oligomers |
|
Isohexadecane is a clear, colorless, and odorless liquid providing high emolliency, ease of spreadability and moisturizing properties. It imparts a non-drying feel on the skin and has a light, smooth feel with excellent cleansing characteristics. Applicat...view more
Isohexadecane is a clear, colorless, and odorless liquid providing high emolliency, ease of spreadability and moisturizing properties. It imparts a non-drying feel on the skin and has a light, smooth feel with excellent cleansing characteristics. Applications for use include: face and eye make-up cleansers, skin care, sun care, color cosmetics, bath oils and foundation creams. view less
Compliance Highlights Unavailable
|
|
| Isooctane100 | INEOS Oligomers |
|
Isooctane100 is a clear, colorless, volatile and odorless liquid. Due to its high evaporative properties, it is an excellent solvent choice when quick drying properties are required. Applications for use include nail care and nail polish formulations.
Compliance Highlights Unavailable
|
|
| Jarocol 1C Thickener | VIVIMED LABS LTD. |
|
Jarocol 1C Thickener is a part of a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the ...view more
Jarocol 1C Thickener is a part of a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the performance, technology and quality requirements demanded by today’s consumer. With the support from Vivimed, they can gain speed to market as well as color matching expertise. view less
Compliance Highlights Available
|
|
| Jarocol 2A3HP | VIVIMED LABS LTD. |
|
Jarocol 2A3HP is a cream to beige powder composed of 2-Aminopyridin-3-ol 3-Hydroxy-2-aminopyridine. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through th...view more
Jarocol 2A3HP is a cream to beige powder composed of 2-Aminopyridin-3-ol 3-Hydroxy-2-aminopyridine. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol 2C Wax | VIVIMED LABS LTD. |
|
Jarocol 2C Wax is a part if a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the perfo...view more
Jarocol 2C Wax is a part if a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the performance, technology and quality requirements demanded by today’s consumer. With the support from Vivimed, they can gain speed to market as well as color matching expertise. view less
Compliance Highlights Available
|
|
| Jarocol 2M5AP | VIVIMED LABS LTD. |
|
Jarocol 2M5AP is a cream to beige crystalline powder composed of 2-Methyl-5-aminophenol-p-Amino-o-cresol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass thro...view more
Jarocol 2M5AP is a cream to beige crystalline powder composed of 2-Methyl-5-aminophenol-p-Amino-o-cresol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol 2M5HEAP | VIVIMED LABS LTD. |
|
Jarocol 2M5HEAP is a beige to cream powder composed of Phenol, 5-[(2-hydroxyethyl)amino]-2-methyl- 1-Methyl-2-hydroxy-4-(beta-hydroxyethyl)-amino-benzene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes ...view more
Jarocol 2M5HEAP is a beige to cream powder composed of Phenol, 5-[(2-hydroxyethyl)amino]-2-methyl- 1-Methyl-2-hydroxy-4-(beta-hydroxyethyl)-amino-benzene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol 2MR | VIVIMED LABS LTD. |
|
Jarocol 2MR is a white to off-white powder composed of 2,6-Dihydroxytoluene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair...view more
Jarocol 2MR is a white to off-white powder composed of 2,6-Dihydroxytoluene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol 2NPPD | VIVIMED LABS LTD. |
|
Jarocol 2NPPD is a fine dark brown powder composed of o-Nitro-p-phenylenediamine. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hai...view more
Jarocol 2NPPD is a fine dark brown powder composed of o-Nitro-p-phenylenediamine. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dyes are typically materials of low molecular weight, which are small enough to infuse into the hair shaft. Subsequent shampooing of the hair after application causes the hair to swell, opening the cuticle and allowing the colour to escape. Colour results therefore typically last 6-8 washes. view less
Compliance Highlights Available
|
|
| Jarocol 4A3MP | VIVIMED LABS LTD. |
|
Jarocol 4A3MP is a beige to pale brown powder composed of 4-Amino-3-methylphenol 3-Methyl-4-aminophenol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass throu...view more
Jarocol 4A3MP is a beige to pale brown powder composed of 4-Amino-3-methylphenol 3-Methyl-4-aminophenol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a primary intermediate - also known as an oxidation base. view less
Compliance Highlights Available
|
|
| Jarocol 4A3NP | VIVIMED LABS LTD. |
|
Jarocol 4A3NP is a dark red powder composed of 3-Nitro-4-aminophenol. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dyes are t...view more
Jarocol 4A3NP is a dark red powder composed of 3-Nitro-4-aminophenol. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dyes are typically materials of low molecular weight, which are small enough to infuse into the hair shaft. Subsequent shampooing of the hair after application causes the hair to swell, opening the cuticle and allowing the colour to escape. Colour results therefore typically last 6-8 washes. view less
Compliance Highlights Available
|
|
| Jarocol 4CLR | VIVIMED LABS LTD. |
|
Jarocol 4CLR is a light grey to light brown powder composed of p-Chlororesorcinol; 4-chloro-1,3-benzenediol; 1-chloro-2,4-dihydroxybenzene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecul...view more
Jarocol 4CLR is a light grey to light brown powder composed of p-Chlororesorcinol; 4-chloro-1,3-benzenediol; 1-chloro-2,4-dihydroxybenzene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol 4NOPD | VIVIMED LABS LTD. |
|
Jarocol 4NOPD is a dull orange powder composed of 4-Nitro-o-phenylenediamine. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dy...view more
Jarocol 4NOPD is a dull orange powder composed of 4-Nitro-o-phenylenediamine. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dyes are typically materials of low molecular weight, which are small enough to infuse into the hair shaft. Subsequent shampooing of the hair after application causes the hair to swell, opening the cuticle and allowing the colour to escape. Colour results therefore typically last 6-8 washes. view less
Compliance Highlights Available
|
|
| Jarocol ACC | VIVIMED LABS LTD. |
|
Jarocol ACC is a cream to beige powder composed of 3-Amino-2-chloro-6-methylphenol 2-Methyl-5-amino-6-chlorophenol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that...view more
Jarocol ACC is a cream to beige powder composed of 3-Amino-2-chloro-6-methylphenol 2-Methyl-5-amino-6-chlorophenol. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol AHEA | VIVIMED LABS LTD. |
|
Jarocol AHEA is a grey powder composed of 2-Amino-4-N(2’hydroxyethyl)anisidine sulfate. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle in...view more
Jarocol AHEA is a grey powder composed of 2-Amino-4-N(2’hydroxyethyl)anisidine sulfate. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol AHP | VIVIMED LABS LTD. |
|
Jarocol AHP is a white to weak pink coloured powder composed of 4,5-Diamino-1-(2-hydroxyethyl)-pyrazole sulfate (1:1). Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials t...view more
Jarocol AHP is a white to weak pink coloured powder composed of 4,5-Diamino-1-(2-hydroxyethyl)-pyrazole sulfate (1:1). Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a primary intermediate - also known as an oxidation base. view less
Compliance Highlights Available
|
|
| Jarocol AN | VIVIMED LABS LTD. |
|
Jarocol AN is a cream to dark cream pink flake composed of beta-Napthol 1-Hydroxynaphthalene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuti...view more
Jarocol AN is a cream to dark cream pink flake composed of beta-Napthol 1-Hydroxynaphthalene. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a secondary intermediate - also known as a coupler. view less
Compliance Highlights Available
|
|
| Jarocol B Liquid | VIVIMED LABS LTD. |
Jarocol B Liquid is a part of a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the perf...view more
Jarocol B Liquid is a part of a range of color base components designed to make permanent hair color easy for manufactures who want to expand their business into permanent hair color. New entrants to the hair colourant market must be able to meet the performance, technology and quality requirements demanded by today’s consumer. With the support from Vivimed, they can gain speed to market as well as color matching expertise. view less
Compliance Highlights Available
|
||
| Jarocol BHP | VIVIMED LABS LTD. |
|
Jarocol BHP is a light grey to grey, slightly violet powder composed of N,N bis(2-Hydroxyethyl)-p-phenylenediamine sulfate. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materi...view more
Jarocol BHP is a light grey to grey, slightly violet powder composed of N,N bis(2-Hydroxyethyl)-p-phenylenediamine sulfate. Jarocol Oxidation Dyes are suitable for permanent and demi-permanent hair colorants. Oxidation dyes are low molecular weight materials that pass through the cuticle into the hair shaft where they oxidise and combine to generate a larger coloured molecule, which remains inside the hair structure. This product is a primary intermediate - also known as an oxidation base. view less
Compliance Highlights Available
|
|
| Jarocol Blue 12 | VIVIMED LABS LTD. |
|
Jarocol Blue 12 is a dark yellow powder composed of 4-[N-ethyl-N-(2-hydroxyethyl)-amino]-1-(2-hydroxyethyl)-amino-2- nitrobenzene monohydrochloride. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by con...view more
Jarocol Blue 12 is a dark yellow powder composed of 4-[N-ethyl-N-(2-hydroxyethyl)-amino]-1-(2-hydroxyethyl)-amino-2- nitrobenzene monohydrochloride. The Jarocol Direct Dyes are suitable for semi-permanent formulations; this makes them ideal for use by consumers who are not ready to commit to a permanent colour. These hair dyes are typically materials of low molecular weight, which are small enough to infuse into the hair shaft. Subsequent shampooing of the hair after application causes the hair to swell, opening the cuticle and allowing the colour to escape. Colour results therefore typically last 6-8 washes. view less
Compliance Highlights Available
|
