| Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
| BASIS LP-20H | Ikeda Corporation |
BASIS LP-20H is a lecithin from soya. It is stable to oxidation. This product is recommended for skin lotions, creams, and lip creams.
Compliance Highlights Available
|
||
| BASIS LP-60HR | Ikeda Corporation |
BASIS LP-60HR is a lecithin from soya. It has a high PC content (around 70%). This product is recommended for skin lotions, creams, and lip creams.
Compliance Highlights Available
|
||
| COSMOL™ 13 | Ikeda Corporation |
|
COSMOL™ 13 is an α- hydroxyl acid ester. It leaves a rich skin feel. This product is a low viscosity oil with high polarity. It is recommended for skin creams, lipsticks, and foundations.
Compliance Highlights Available
|
|
| COSMOL™ 168ARV | Ikeda Corporation |
|
COSMOL™ 168ARV is a fatty acid ester which mainly consists of Dipentaerythritol and mixed fatty acids. It is used as a substitute for Lanolin, and has good water-holding capacity. This product is recommended for lipsticks, hair treatments, hair conditione...view more
COSMOL™ 168ARV is a fatty acid ester which mainly consists of Dipentaerythritol and mixed fatty acids. It is used as a substitute for Lanolin, and has good water-holding capacity. This product is recommended for lipsticks, hair treatments, hair conditioners, and creams. view less
Compliance Highlights Available
|
|
| COSMOL™ 168EV | Ikeda Corporation |
|
COSMOL™ 168EV is a substitute for Lanolin. It is especially recommended for lipsticks, creams, and skin lotions.
Compliance Highlights Available
|
|
| COSMOL™ 168M | Ikeda Corporation |
|
COSMOL™ 168M is a substitute for Lanolin. It is supplied as a yellow or pale brown, nearly odorless material. This product is recommended for lipsticks, creams, and skin lotions.
Compliance Highlights Available
|
|
| COSMOL™ 182V | Ikeda Corporation |
|
COSMOL™ 182V is a nonionic emulsifier. It is derived from raw materials which are all of vegetable origin. This product is recommended for foundations, W/O creams, and sun care products.
Compliance Highlights Available
|
|
| COSMOL™ 222 | Ikeda Corporation |
COSMOL™ 222 is a substitute for castor oil. It finds widespread use as a pigment dispersant, binder in pressed powders and as a rich emollient in creams, lotions and hair care products.
Compliance Highlights Available
|
||
| COSMOL™ 41V | Ikeda Corporation |
COSMOL™ 41V is a nonionic emulsifier. It is composed of raw materials of vegetable origin. This product is recommended for W/O creams, hair care products, and cleansers.
Compliance Highlights Available
|
||
| COSMOL™ 42V | Ikeda Corporation |
COSMOL™ 42V is a nonionic emulsifier. It is composed of raw materials which are all of vegetable origin. This product is recommended for liquid makeup products, and W/O creams.
Compliance Highlights Available
|
||
| COSMOL 43N | Ikeda Corporation |
Highly methyl-branched isostearic acid ester. High glossiness. Recommended for lip glosses, creams.
Compliance Highlights Available
|
||
| COSMOL 43V | Ikeda Corporation |
Excellent dispersing agent for pigments. All raw materials are vegetable origin. Recommended for lipsticks, foundations and creams.
Compliance Highlights Available
|
||
| COSMOL 44V | Ikeda Corporation |
High molecular weight and stable ester. Leave a rich feel. All raw materials are vegetable-origin. Recommended for foundations, skin care products.
Compliance Highlights Available
|
||
| COSMOL 525 | Ikeda Corporation |
Light emollient ester. Recommended for pressed powders, hair sprays.
Compliance Highlights Available
|
||
| COSMOL 82 | Ikeda Corporation |
Nonionic emulsifier. All raw materials are vegetable-origin. It contains tocopherol approx. 100ppm. Recommended for foundations, W/O creams.
Compliance Highlights Available
|
||
| ESTEMOL N-01 | Ikeda Corporation |
ESTEMOL N-01 is a light and safe emollient ester. It is recommended for skin creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
| NOMCORT® ZZ | Ikeda Corporation |
NOMCORT® ZZ is a higher viscosity and higher yield point than standard Xanthan gum. It is ideal for transparent formulations. This product is recommended for lotions and serums.
Compliance Highlights Available
|
||
| NOMCORT® AG | Ikeda Corporation |
|
NOMCORT® AG is a water-soluble polymer. It is easy to prepare surfactant-free emulsions with several kinds of oil, including high polar esters and insoluble combination of oils. This product is recommended for milk lotions, cleansing gel, and sunscreen lo...view more
NOMCORT® AG is a water-soluble polymer. It is easy to prepare surfactant-free emulsions with several kinds of oil, including high polar esters and insoluble combination of oils. This product is recommended for milk lotions, cleansing gel, and sunscreen lotion. view less
Compliance Highlights Available
|
|
| NOMCORT® CG | Ikeda Corporation |
|
NOMCORT® CG is a water-soluble polymer. It is easy to make transparent elastic gel. This product is recommended for lotions, serums, aroma gels, and point makeup products.
Compliance Highlights Available
|
|
| NOMCORT® HK-G | Ikeda Corporation |
|
NOMCORT® HK-G is an oil gelling agent. It can be used as a thickener and a stabilizer for W/O preparations. This product is recommended for W/O creams, liquid foundations, and cleansers.
Compliance Highlights Unavailable
|
|
| NOMCORT® HK-P | Ikeda Corporation |
NOMCORT® HK-P is a glycol gelling agent. It can be used as a thickener and a stabilizer for O/W preparations. This product is recommended for O/W creams and cleansers.
Compliance Highlights Available
|
||
| NOMCORT® HP-30 | Ikeda Corporation |
NOMCORT® HP-30 is a non-polar oil with a main content of C40. It contains dl-α-tocopherol approx. 50ppm. This product is recommended for lipsticks, lip glosses, creams, lotions, and foundations.
Compliance Highlights Available
|
||
| NOMCORT® HR-822 | Ikeda Corporation |
NOMCORT® HR-822 is a high refractive index ester with luster inproving effect. It is suitable for improving texture and strength for lipsticks. This product is recommended for lipsticks.
Compliance Highlights Available
|
||
| NOMCORT® LAH | Ikeda Corporation |
NOMCORT® LAH has good water-holding capacity and is stable to oxidation. This product is recommended for skin creams, lotions, hair treatments, hair conditioners.
Compliance Highlights Available
|
||
| NOMCORT® SG | Ikeda Corporation |
|
NOMCORT® SG is an oil gelling agent (soft gel). It is a thickener and a stabilizer for W/O preparations. This product is recommended for W/O creams, liquid foundations, and cleansers.
Compliance Highlights Available
|
|
| NOMCORT® TAB | Ikeda Corporation |
NOMCORT® TAB is UV-B absorbent and high purity because of special refinement. It contains d-δ-tocopherol (200～600ppm). This product is recommended for sun care products, foundations, and lip creams.
Compliance Highlights Available
|
||
| NOMCORT® T.I.O. | Ikeda Corporation |
NOMCORT® T.I.O. is a highly refined, extremely stable multi-functional emollient ester. This product is recommended for almost all cosmetics.
Compliance Highlights Available
|
||
| NOMCORT® TQ-5 | Ikeda Corporation |
NOMCORT® TQ-5 is an excellent dispersing agent for pigments. It contains tocopherol at approximately 200ppm. All raw materials are vegetable-origin. This product is recommended for lipsticks, foundations, and W/O/W emulsions.
Compliance Highlights Available
|
||
| NOMCORT® Z | Ikeda Corporation |
NOMCORT® Z has a higher viscosity and higher yield point than standard Xanthan gum. It is recommended for lotions and serums.
Compliance Highlights Available
|
||
| O.D.O. | Ikeda Corporation |
|
O.D.O. is a medium-chain triglyceride with a non-greasy feel. It is an excellent solvent, and all raw materials are of vegetable origin. This product is recommended for lipsticks and oil based facial cleansers.
Compliance Highlights Available
|
|
| SALACOS® 121 | Ikeda Corporation |
SALACOS® 121 is a high melting point monoglyceride. All raw materials are of vegetable origin. This product is especially recommended for creams.
Compliance Highlights Available
|
||
| SALACOS® 3318 | Ikeda Corporation |
SALACOS® 3318 is a highly methyl-branched isostearic acid ester. It offers high glossiness. This product is recommended for lipsticks and lip glosses.
Compliance Highlights Available
|
||
| SALACOS® 334 | Ikeda Corporation |
SALACOS® 334 is an emollient wax with melting point 38～42℃. All raw materials are of vegetable origin. This product is recommended for lipsticks, foundations, and hair treatments.
Compliance Highlights Available
|
||
| SALACOS® 5408 | Ikeda Corporation |
SALACOS® 5408 is a high molecular weight and extremely stable ester. When used in personal care products, it leaves a rich feeling. This product is recommended for skin creams, lotions, hair care products, and lipsticks.
Compliance Highlights Available
|
||
| SALACOS® 5418V | Ikeda Corporation |
SALACOS® 5418V is a high molecular weight and stable ester. It leaves a rich feel in personal care products. This ester is recommended for lip glosses, skin care products.
Compliance Highlights Available
|
||
| SALACOS® 6318V | Ikeda Corporation |
SALACOS® 6318V is a slow spreading emollient. It contains tocopherol at approximately 200ppm. This product is recommended for foundations and massage oils.
Compliance Highlights Available
|
||
| SALACOS® 816T | Ikeda Corporation |
SALACOS® 816T is a non-oily emollient ester. This product is recommended for skin creams, suntan lotions, and oil based facial cleansers.
Compliance Highlights Available
|
||
| SALACOS® 913 | Ikeda Corporation |
SALACOS® 913 is a non-oily, nearly dry emollient. It is a silicone oil solubilizer. This product is recommended for oil based facial cleansers, light creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
| SALACOS® 99 | Ikeda Corporation |
SALACOS® 99 is a dry and silky touch emollient. This product is recommended for light creams, lotions, bath oils, liquid foundations, and oil based facial cleansers.
Compliance Highlights Available
|
||
| SALACOS® DG-158 | Ikeda Corporation |
|
SALACOS® DG-158 is a nonionic emulsifier with HLB of 8. It contains tocopherol at approximately 100ppm. This product is recommended for oil based facial cleansers, W/O creams, and skin care products
Compliance Highlights Available
|
|
| SALACOS® DG-180 | Ikeda Corporation |
|
SALACOS® DG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. All raw materials are vegetable-origin. It contains tocopherol 300ppm, glyceryl (citric acid/ fatty acid) esters 500ppm and rice bran oil 0-17ppm. This pro...view more
SALACOS® DG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. All raw materials are vegetable-origin. It contains tocopherol 300ppm, glyceryl (citric acid/ fatty acid) esters 500ppm and rice bran oil 0-17ppm. This product is recommended for oil based facial cleansers and skin care products. view less
Compliance Highlights Available
|
|
| SALACOS® DP-518N | Ikeda Corporation |
|
SALACOS® DP-518N is a Polyisobuten replacement. It is a high viscosity ester. This product has good pigment dispersing ability.
Compliance Highlights Unavailable
|
|
| SALACOS® FH | Ikeda Corporation |
SALACOS® FH is similar to intercellular lipid. It has excellent water-holding capacity. All raw materials are of vegetable-origin. This product is recommended for creams, lotions, foundations, cleansing creams, and lipsticks.
Compliance Highlights Available
|
||
| SALACOS® GE-118 | Ikeda Corporation |
SALACOS® GE-118 is a nonionic emulsifier with HLB of 13. It contains tocopherol at approximately 300ppm. This product is recommended for facial cleansers, both oil based and water based.
Compliance Highlights Available
|
||
| SALACOS® GE-318 | Ikeda Corporation |
SALACOS® GE-318 is a nonionic emulsifier with HLB of 8. It contains tocopherol of approximately 300ppm. This product is recommended for facial cleansers, both oil based and water based.
Compliance Highlights Available
|
||
| SALACOS® HG-8 | Ikeda Corporation |
SALACOS® HG-8 is derived from raw materials of vegetable origin. It is easy to make stable emulsions because of the specific gravity. It contains tocopherol at approximately 100ppm. This product is recommended for skin care products and makeup products.
Compliance Highlights Available
|
||
| SALACOS® HS | Ikeda Corporation |
SALACOS® HS is similar to intercellular lipid. It shows excellent water-holding capacity. This product is recommended for creams, lotions, foundations, cleansing creams, and lipsticks.
Compliance Highlights Available
|
||
| SALACOS® HS-6C | Ikeda Corporation |
|
SALACOS® HS-6C is an excellent dispersing agent for pigments. All raw materials are of vegetable origin. This product is recommended for sun care products, makeup products and cleansing products.
Compliance Highlights Available
|
|
| SALACOS® P-8 | Ikeda Corporation |
SALACOS® P-8 is a non-oily emollient ester. It is similar to Cetyl Ethylhexanoate. This product is recommended for hair sprays, skin creams, oil based facial cleansers, suntan lotions, and hair conditioners.
Compliance Highlights Available
|
||
| SALACOS® PG-180 | Ikeda Corporation |
|
SALACOS® PG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. It contains tocopherol at approximately 300ppm. This product is recommended for oil based facial cleansers, and nano emulsions combination with DG-180.
Compliance Highlights Available
|
|
| SALACOS® PG-218 | Ikeda Corporation |
|
SALACOS® PG-218 is a nonionic emulsifier with HLB of 11. It contains tocopherol at approximately 500ppm. This product is recommended for oil based facial cleansers, W/O creams, and skin care products.
Compliance Highlights Available
|
|
| SALACOS® PGDSV | Ikeda Corporation |
SALACOS® PGDSV is a nonionic emulsifier with HLB of 9. All raw materials are vegetable-origin. It is supplied as a white or pale yellow solid with a slight characteristic odor. This product is recommended for O/W skin care products.
Compliance Highlights Available
|
||
| SALACOS® PGMSV | Ikeda Corporation |
SALACOS® PGMSV is a nonionic emulsifier with an HLB of 14. This product is especially recommended for O/W skin care products.
Compliance Highlights Available
|
||
| SALACOS® PO(T) | Ikeda Corporation |
SALACOS® PO(T) is derived from raw materials of vegetable origin. It has excellent water-holding capacity and contains tocopherol of approximately 100ppm. This product is recommended for creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
| SALACOS® PR-17 | Ikeda Corporation |
|
SALACOS® PR-17 is derived from vegetable raw materials. It has a smooth and moist texture like Macadamia nut oil. This product is recommended for skin care products, makeup products, and hair care products.
Compliance Highlights Available
|
|
| SALACOS® PR-85 | Ikeda Corporation |
|
SALACOS® PR-85 is an ester made from raw materials of vegetable origin. It has excellent cleansing ability. This dry and silky touch emollient is recommended for oil based facial cleansers, light creams, lotions, lipsticks.
Compliance Highlights Available
|
|
| SALACOS® WO-6 | Ikeda Corporation |
|
SALACOS® WO-6 is a light yellow to yellow liquid. It has superior water-holding capacity and waterproof film ability, high glossiness, and is an excellent dispersing agent for pigments. This product is recommended for creams, lip sticks, foundations, hair...view more
SALACOS® WO-6 is a light yellow to yellow liquid. It has superior water-holding capacity and waterproof film ability, high glossiness, and is an excellent dispersing agent for pigments. This product is recommended for creams, lip sticks, foundations, hair treatments. view less
Compliance Highlights Available
|
|
| Sodium Acetylated Hyaluronic Acid | Ikeda Corporation |
|
Sodium Acetylated Hyaluronic Acid ( AcHA ) is a distinctive HA-derivative which is easy to use due to amphipathic properties, has high suppleness of the stratum corneum, and offers high water-retentiivity (more than 2 times than normal HA). This product ...view more
Sodium Acetylated Hyaluronic Acid ( AcHA ) is a distinctive HA-derivative which is easy to use due to amphipathic properties, has high suppleness of the stratum corneum, and offers high water-retentiivity (more than 2 times than normal HA). This product has a strong affinity for skin, and remains firmly on the surface of skin to prevent water from evaporating from skin. view less
Compliance Highlights Unavailable
|
|
| Tocopherol 100 | Ikeda Corporation |
|
Tocopherol 100 is derived from vegetable oils such as soybean and rape seed. It is supplied as yellow or brown viscous oil with a slight characteristic odor. This product is used as an anti-oxidant for cosmetics. It is especially recommended for skin care...view more
Tocopherol 100 is derived from vegetable oils such as soybean and rape seed. It is supplied as yellow or brown viscous oil with a slight characteristic odor. This product is used as an anti-oxidant for cosmetics. It is especially recommended for skin care products. view less
Compliance Highlights Available
|
|
| BB Cream | Ikeda Corporation | This formulation produces a BB Cream. It features the products SALACOS® WO-6, SALACOS® 913, T.I.O®, NOMCORT® HP-30, and NOMCORT® TAB. | ||
| Cleansing Paste (Formulation #60714A,B) | Ikeda Corporation | This formulation produces a cleansing paste. It features the products NOMCORT® HK-P, SALACOS® PG-180, BASIS® LP-20H, and SALACOS® P-8. | ||
| Cream Foundation With Nomcort AG | Ikeda Corporation | This formulation yields a cream foundation. It features the products NOMCORT® AG, SALACOS® E-38, and SALACOS® HS-6C. | ||
| Milky Lotion (Formulation #2011-3-A) | Ikeda Corporation | This formulation produces a milky lotion. It features the products NOMCORT® HP-30, SALACOS® 913, SALACOS® 334, Tocopherol 100, and NOMCORT® ZZ. | ||
| Sunscreen Cream With Nomcort AG | Ikeda Corporation | This formulation yields a sunscreen cream. It features the products NOMCORT® AG, BASIS® LP-20H, and SALACOS® E-38. | ||
| Analytics Laboratory | Buhler Grinding & Dispersing Technologies | The Analytics Laboratory offers a broad range of analyses for innovative processes. For more information about this service, please utilize the "Sales & Technical Support" request link above. | ||
| Centex® | Buhler Grinding & Dispersing Technologies | Horizontal full volume agitated bead mill with innovative combination of functional elements. Ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. |  |
|
| Consulting | Buhler Grinding & Dispersing Technologies | Act today to ensure a successful tomorrow: Buhler consulting services give you a decisive competitive edge for the future. For more information about this service, please utilize the "Sales & Technical Support" request link above. | ||
| Fully Hydraulic Three-Roll Mills SDX, SDW, SDY, SDV(E) | Buhler Grinding & Dispersing Technologies | Fully hydraulic three-roll mills can be used for many different applications. They are most suitable for a wide range of medium to high viscosity products, e.g. all kinds of printing inks, artists’ colours, industrial and decorative paints, toners, coatin...view more Fully hydraulic three-roll mills can be used for many different applications. They are most suitable for a wide range of medium to high viscosity products, e.g. all kinds of printing inks, artists’ colours, industrial and decorative paints, toners, coating masses and lubricants, but also for materials for the electronics and cosmetics industries. Three-roll mills are designed for meeting highest quality demands and at the same time enable convenient, easy operation and quick cleaning. view less |  |
|
| K-Series | Buhler Grinding & Dispersing Technologies | The K series is suitable for a wide range of products from low to very high viscosities.The mill is available in sizes ranging from laboratory to large-production mill and is ideal for scale-up. The core piece is a conical agitator with centrifugal relief...view more The K series is suitable for a wide range of products from low to very high viscosities.The mill is available in sizes ranging from laboratory to large-production mill and is ideal for scale-up. The core piece is a conical agitator with centrifugal relief of the gap separation and intensive stator and rotor cooling. Optional special materials enable contamination-free processes. view less |  |
|
| Maintenance | Buhler Grinding & Dispersing Technologies | Even the most robust and reliable machinery and equipment needs regular maintenance. Buhler offers a proven maintenance service for all makes, tailored to your needs. For more information about this service, please utilize the "Sales & Technical Support"...view more Even the most robust and reliable machinery and equipment needs regular maintenance. Buhler offers a proven maintenance service for all makes, tailored to your needs. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| Manufacturing & Logistics | Buhler Grinding & Dispersing Technologies | Buhler Manufacturing & Logistics is an independent division of Buhler which operates as an autonomous organization in the marketplace. It supplies competitive assemblies for machines and plants to outside customers and Buhler business units worldwide. It ...view more Buhler Manufacturing & Logistics is an independent division of Buhler which operates as an autonomous organization in the marketplace. It supplies competitive assemblies for machines and plants to outside customers and Buhler business units worldwide. It generates sales revenue (turnover) of about CHF 400 million annually and has a global payroll of 1700. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| MicroMedia® | Buhler Grinding & Dispersing Technologies | Small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia® excels by an i...view more Small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia® excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. view less |  |
|
| Repairs | Buhler Grinding & Dispersing Technologies | Machinery outages and production downtime – even when the worst happens, you can rely on the comprehensive support offered by the Buhler service team. You can trust us to provide spare parts and repair services, quickly and anywhere in the world. For more...view more Machinery outages and production downtime – even when the worst happens, you can rely on the comprehensive support offered by the Buhler service team. You can trust us to provide spare parts and repair services, quickly and anywhere in the world. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| Retrofit & Reconditioning | Buhler Grinding & Dispersing Technologies | Buying a new machine isn’t always the best solution. Instead, consider updating your existing equipment to the latest specifications. We will be happy to show you just how easy this is. For more information about this service, please utilize the "Sales & ...view more Buying a new machine isn’t always the best solution. Instead, consider updating your existing equipment to the latest specifications. We will be happy to show you just how easy this is. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| Spare Parts | Buhler Grinding & Dispersing Technologies | Only Buhler original parts meet Buhler’s high quality standards. Our precision-manufactured spare parts maintain the value of your machinery, extend its life cycle – and ensure that the valuable product warranty remains valid. For more information about t...view more Only Buhler original parts meet Buhler’s high quality standards. Our precision-manufactured spare parts maintain the value of your machinery, extend its life cycle – and ensure that the valuable product warranty remains valid. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| SuperFlow® | Buhler Grinding & Dispersing Technologies | Small volume annular agitated bead mill with axial product flow featuring a power density up to 4 kW/l. The energy introduction is accomplished by turbulent eddying of beads of 0.3–1.5 mm via tightly overlapping pegs. Slim shaped process areas set-up in s...view more Small volume annular agitated bead mill with axial product flow featuring a power density up to 4 kW/l. The energy introduction is accomplished by turbulent eddying of beads of 0.3–1.5 mm via tightly overlapping pegs. Slim shaped process areas set-up in series and internal bead circulation with centrifugal separation at the upper end of the inner process area are unique features of the SuperFlow®. view less |  |
|
| Training & Courses | Buhler Grinding & Dispersing Technologies | Technology is much easier to copy than knowledge, experience, and values. By permanently continuing your education and training, you will remain fit to meet the challenges as they change and you can utilize the potential of your Buhler plant to the full. ...view more Technology is much easier to copy than knowledge, experience, and values. By permanently continuing your education and training, you will remain fit to meet the challenges as they change and you can utilize the potential of your Buhler plant to the full. For more information about this service, please utilize the "Sales & Technical Support" request link above. view less | ||
| Trias® | Buhler Grinding & Dispersing Technologies | Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of the new Buhler three-roll mill. Different roll materials and concepts permit clean room production according to internati...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of the new Buhler three-roll mill. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less |  |
|
| Wet Grinding & Dispersing | Buhler Grinding & Dispersing Technologies | In all industries where wet grinding and dispersion are key processes – printing inks, coatings, electronic materials or fine chemicals – Buhler demonstrates a comprehensive know-how and the ability to deliver its customers tailor-made systems for complex...view more In all industries where wet grinding and dispersion are key processes – printing inks, coatings, electronic materials or fine chemicals – Buhler demonstrates a comprehensive know-how and the ability to deliver its customers tailor-made systems for complex processes. As a global technology partner for process engineering, Buhler offers you not only state-of-the-art machines, but also complete solutions for the manufacture of highly advanced materials. view less |
