| Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
| Arbalon® R-50 cellulose liquid | Lubrizol |
|
Arbalon® R-50 cellulose liquid is a unique and highly functional form of pre-activated cellulose solution characterized by its ability to impart a true yield stress and suspend insoluble particles in personal care formulations while at the same time impar...view more
Arbalon® R-50 cellulose liquid is a unique and highly functional form of pre-activated cellulose solution characterized by its ability to impart a true yield stress and suspend insoluble particles in personal care formulations while at the same time imparting a minimal negative impact on the final viscosity of the formulation. Arbalon® R-50 cellulose liquid is an eco-friendly alternative derived from microbial fermentation process. Arbalon® products are manufactured by CP Kelco U.S., INC. Arbalon® is a trademark of CP Kelco and is used under license. view less
Compliance Highlights Unavailable
|
|
| Arbalon® R-50 EV cellulose liquid | Lubrizol |
|
Arbalon® R-50 EV cellulose liquid is a unique and highly functional form of pre-activated cellulose solution characterized by its ability to impart a true yield stress and suspend insoluble particles in personal care formulations while at the same time im...view more
Arbalon® R-50 EV cellulose liquid is a unique and highly functional form of pre-activated cellulose solution characterized by its ability to impart a true yield stress and suspend insoluble particles in personal care formulations while at the same time imparting a minimal negative impact on the final viscosity of the formulation. Arbalon® R-50 EV cellulose liquid is an eco-friendly alternative derived from microbial fermentation process under a vegan and COSMOS process. Arbalon® products are manufactured by CP Kelco U.S., INC. Arbalon® is a trademark of CP Kelco and is used under license. view less
Compliance Highlights Available
|
|
| Carbopol® SC-200 polymer | Lubrizol |
|
Carbopol® SC-200 polymer is a white powder, hydrophobically-modified cross-linked polyacrylic acid polymer that is polymerized in a toxicologically-preferred cosolvent system. It has been designed by optimizing the level of crosslinking and hydrophobic co...view more
Carbopol® SC-200 polymer is a white powder, hydrophobically-modified cross-linked polyacrylic acid polymer that is polymerized in a toxicologically-preferred cosolvent system. It has been designed by optimizing the level of crosslinking and hydrophobic content to provide outstanding performance in soap-based formulations. It provides long-term thermal stability in high pH soap-based cleansers and is suggested for use in body and hand washes, shampoos, and mild personal cleansing products. view less
Compliance Highlights Unavailable
|
|
| Carbopol® SC-800 polymer | Lubrizol |
|
Carbopol® SC-800 polymer is a hydrophobically modified cross-linked polyacrylic acid polymer processed in a toxicologically preferred cosolvent system. It has been balanced with crosslinker levels, hydrophobic content and surface modification to provide t...view more
Carbopol® SC-800 polymer is a hydrophobically modified cross-linked polyacrylic acid polymer processed in a toxicologically preferred cosolvent system. It has been balanced with crosslinker levels, hydrophobic content and surface modification to provide the best efficiency and ease of processing for challenging surfactant systems. The INCI name has been CFDA listed. view less
Compliance Highlights Unavailable
|
|
| Carbopol® Clear polymer | Lubrizol |
|
Carbopol® Clear polymer is a versatile, unique polymer created to provide exclusive wet styling textures. It is a crosslinked homopolymer of acrylic acid polymerized in a preferred cosolvent system. It has been optimally designed to provide outstanding pe...view more
Carbopol® Clear polymer is a versatile, unique polymer created to provide exclusive wet styling textures. It is a crosslinked homopolymer of acrylic acid polymerized in a preferred cosolvent system. It has been optimally designed to provide outstanding performance in wet styling formulations. The ability to build high viscosity at lower polymer solids, extraordinary clarity and extremely fast dispersion times makes it exclusive for wet styling applications. The polymer has been especially fashioned to build distinctive textures by varying polymer concentration. It shows good compatibility and synergy with Fixate™ Polymers. view less
Compliance Highlights Unavailable
|
|
| Carbopol® Silk 100 polymer | Lubrizol |
|
Carbopol® Silk 100 polymer is a crosslinked polyacrylic acid that is polymerized in a toxicologically-preferred cosolvent system. It delivers excellent suspending capability and stabilizes insoluble conditioning agents commonly used in 2-in-1 shampoos. At...view more
Carbopol® Silk 100 polymer is a crosslinked polyacrylic acid that is polymerized in a toxicologically-preferred cosolvent system. It delivers excellent suspending capability and stabilizes insoluble conditioning agents commonly used in 2-in-1 shampoos. At low concentrations it provides excellent flow properties and exhibits synergistic behavior with salt. Designed to meet the challenge of optimized product performance at the lowest possible cost in use, Carbopol Silk 100 polymer allows for reduction in surfactant levels and conditioning agents as well as the incorporation of non-silicone based conditioning ingredients, particularly natural oils. view less
Compliance Highlights Unavailable
|
|
| Carbopol® Style 2.0 polymer | Lubrizol |
|
Carbopol® Style 2.0 polymer is a rheology modifier with inherent boosting properties that provides the end user/consumer a stronger hold in wet styling applications than current products on the market. This crosslinked polyacrylic acid polymer available i...view more
Carbopol® Style 2.0 polymer is a rheology modifier with inherent boosting properties that provides the end user/consumer a stronger hold in wet styling applications than current products on the market. This crosslinked polyacrylic acid polymer available in white powder form has great flexibility and compatibility with fixatives, humectants, and fragrances that are popular in the market. view less
Compliance Highlights Unavailable
|
|
| Glucam™ E-10 humectant | Lubrizol |
|
Glucam™ E-10 humectant is a naturally-derived, mild ingredient that delivers moisture to the skin while reducing the tacky feel normally associated with the ingredients typically used in moisturizing skin creams. It is an ethoxylated methyl glucose ether ...view more
Glucam™ E-10 humectant is a naturally-derived, mild ingredient that delivers moisture to the skin while reducing the tacky feel normally associated with the ingredients typically used in moisturizing skin creams. It is an ethoxylated methyl glucose ether and is 100% active. Its low irritation potential makes it ideal for use in both rinse off and leave on skin care systems such as lotions, creams, and body cleansing formulations. view less
Compliance Highlights Available
|
|
| Glucam™ P-10 humectant | Lubrizol |
|
Glucam™ P-10 humectant is a naturally-derived, 100% active, propoxylated methyl glucose ether. It creates a luxurious feel in shampoos and other surfactant systems. Its mildness makes it a natural choice for makeup products used around the eye or in formu...view more
Glucam™ P-10 humectant is a naturally-derived, 100% active, propoxylated methyl glucose ether. It creates a luxurious feel in shampoos and other surfactant systems. Its mildness makes it a natural choice for makeup products used around the eye or in formulations made for sensitive skin. It is recommended for use in lotions, creams, cleansing formulations, hair conditioners, styling gels, and mousses. view less
Compliance Highlights Unavailable
|
|
| Glucamate™ SSE-20 emulsifier | Lubrizol |
|
Glucamate SSE-20 is an ethoxylated methyl glucose ether which has been esterified with stearic acid. It is 100% active and is supplied as a soft solid. Glucate SS emulsifier has water-in-oil emulsifying activity, and Glucamate SSE-20 emulsifier is an oil-...view more
Glucamate SSE-20 is an ethoxylated methyl glucose ether which has been esterified with stearic acid. It is 100% active and is supplied as a soft solid. Glucate SS emulsifier has water-in-oil emulsifying activity, and Glucamate SSE-20 emulsifier is an oil-in-water emulsifier. Used together, they form a complementary pair offering safety and performance advantages over more conventional emulsifiers. With extremely low eye irritation scores, these ingredients are perfect for creams, lotions and makeup used near the eye. view less
Compliance Highlights Unavailable
|
|
| Glucate™ SS emulsifier | Lubrizol |
|
Glucate SS emulsifier is methyl glucose esterified with stearic acid. It is 100% active, and is supplied as off-white flakes. Glucate SS emulsifier has water-in-oil emulsifying activity, and Glucamate SSE-20 emulsifier is an oil-in-water emulsifier. Used ...view more
Glucate SS emulsifier is methyl glucose esterified with stearic acid. It is 100% active, and is supplied as off-white flakes. Glucate SS emulsifier has water-in-oil emulsifying activity, and Glucamate SSE-20 emulsifier is an oil-in-water emulsifier. Used together, they form a complementary pair offering safety and performance advantages over more conventional emulsifiers. With extremely low eye irritation scores, these ingredients are perfect for creams, lotions and make-up used near the eye. view less
Compliance Highlights Available
|
|
| Glucquat™ 125 humectant | Lubrizol |
|
Glucquat™ 125 humectant is a naturally-derived, 25% active, mild, effective alternative to other harsh monomeric quaternary ammonium compounds. It offers formulators humectant and conditioning properties and compatibility with a wide range of materials. B...view more
Glucquat™ 125 humectant is a naturally-derived, 25% active, mild, effective alternative to other harsh monomeric quaternary ammonium compounds. It offers formulators humectant and conditioning properties and compatibility with a wide range of materials. Because it is quaternized, Glucquat 125 humectant is also a substantive conditioning agent for hair and skin. It is recommended for use in conditioners, skin care applications, and baby bath and shower products. view less
Compliance Highlights Unavailable
|
|
| Luxomatte® N MT125 | AMCOL Health & Beauty Solutions, Inc. |
|
Luxomatte® N MT125 is a free-flowing white amorphous polymeric powder that absorbs high levels of lipophilic materials while providing an elegant skin feel. It is capable of providing a variety functional benefits to topical formulations used in personal ...view more
Luxomatte® N MT125 is a free-flowing white amorphous polymeric powder that absorbs high levels of lipophilic materials while providing an elegant skin feel. It is capable of providing a variety functional benefits to topical formulations used in personal care applications. This product consists of high surface area cellulose microparticles that have a strong affinity for sebum and other oils. The Luxomatte® N MT125 particles, when delivered to the skin can provide sebum control and mattifying effects in cosmetic formulations. view less
Compliance Highlights Unavailable
|
|
| Merquat™ 3330PR polymer | Lubrizol |
|
Merquat™ 3330PR polymer is a non-paraben, ampholytic terpolymer that is compatible with anionic and amphoteric surfactants. Merquat 3330PR polymer is ideally suited for liquid cleansing products. In skin care, bath and shower formulations, it provides sil...view more
Merquat™ 3330PR polymer is a non-paraben, ampholytic terpolymer that is compatible with anionic and amphoteric surfactants. Merquat 3330PR polymer is ideally suited for liquid cleansing products. In skin care, bath and shower formulations, it provides silky skin feel and moisturization. In hair care formulations, it provides excellent wet and dry combing properties. view less
Compliance Highlights Available
|
|
| Merquat™ 3331PR polymer | Lubrizol |
|
Merquat™ 3331PR polymer is a non-paraben, ampholytic terpolymer that is compatible with anionic and amphoteric surfactants. It has the highest charge density within the Merquat 3330 polymer family. It is ideally suited for liquid cleansing products. In sk...view more
Merquat™ 3331PR polymer is a non-paraben, ampholytic terpolymer that is compatible with anionic and amphoteric surfactants. It has the highest charge density within the Merquat 3330 polymer family. It is ideally suited for liquid cleansing products. In skin care, bath and shower formulations, it provides silky skin feel and moisturization. In hair care formulations, it provides excellent wet and dry combing properties. view less
Compliance Highlights Available
|
|
| Merquat™ 550PR polymer | Lubrizol |
|
Merquat™ 550PR polymer is a low acrylamide, non-paraben, aqueous, cationic copolymer developed for improved compatibility and clarity in anionic surfactant systems. This highly substantive copolymer is recommended to improve wet and dry properties of hair...view more
Merquat™ 550PR polymer is a low acrylamide, non-paraben, aqueous, cationic copolymer developed for improved compatibility and clarity in anionic surfactant systems. This highly substantive copolymer is recommended to improve wet and dry properties of hair care products and to enhance feel in skin care and bath and shower products. The Merquat 550™ polymer line results in the highest conditioning in the PQ-7 family. view less
Compliance Highlights Available
|
|
| Merquat™ 7SPR polymer | Lubrizol |
|
Merquat™ 7SPR polymer is an aqueous, high molecular weight, non-paraben, low acrylamide, cationic copolymer developed for the highest compatibility and clarity within the PQ-7 family in anionic surfactant systems. This highly substantive copolymer is reco...view more
Merquat™ 7SPR polymer is an aqueous, high molecular weight, non-paraben, low acrylamide, cationic copolymer developed for the highest compatibility and clarity within the PQ-7 family in anionic surfactant systems. This highly substantive copolymer is recommended to improve wet and dry properties of hair care products and to enhance feel in bath and shower products. view less
Compliance Highlights Available
|
|
| MICROSPONGE® N 720BK | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 720BK is multifunctional microparticle delivery system designed to provide sustained release of Bakuchiol in topical formulations.
Compliance Highlights Available
|
|
| Microsponge® N 720TRE | AMCOL Health & Beauty Solutions, Inc. |
|
Microsponge® N 720TRE (MSN 720TRE) is a retinol delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation c...view more
Microsponge® N 720TRE (MSN 720TRE) is a retinol delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation compared to conventional formulations. MSN 720TRE is a yellow, free flowing powder that can be readily dispersed in gels, emulsions and powders, minimizing the discoloration problems associated with many retinol products. MSN 720TRE also is a source of BHA-free retinol and is not subject to Listing under California Proposition 65. view less
Compliance Highlights Available
|
|
| MICROSPONGE® N 725GA | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 725GA consists of the MICROSPONGE® N Natural Microparticle loaded with 25% by weight of Glycolic Acid. It provides sustained release of cosmetic, OTC and Rx actives in formulations. This technology yields effective products that have reduce...view more
MICROSPONGE® N 725GA consists of the MICROSPONGE® N Natural Microparticle loaded with 25% by weight of Glycolic Acid. It provides sustained release of cosmetic, OTC and Rx actives in formulations. This technology yields effective products that have reduced levels of irritation. MICROSPONGE® N 725GA helps to exfoliate the skin, remove the outer layer of dead skin and to bring fresh new skin to the surface. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® N 733SA | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 733SA is a natural microparticle delivery system loaded with 33% Salicylic Acid that is useful in a wide variety of cosmetic and OTC personal care formulations. The product is supplied as a free-flowing off-white powder that contains no pre...view more
MICROSPONGE® N 733SA is a natural microparticle delivery system loaded with 33% Salicylic Acid that is useful in a wide variety of cosmetic and OTC personal care formulations. The product is supplied as a free-flowing off-white powder that contains no preservatives or alcohol. view less
Compliance Highlights Available
|
|
| Novemer™ EC-1 polymer | Lubrizol |
|
Novemer™ EC-1 polymer is a 27% solids, liquid, pre-neutralized polymer dispersed in oil. It is an easy-to-use, multifunctional polymer designed for use in skin care and sun care oil-in-water emulsions. Novemer EC-1 polymer enables elegant, stable emulsion...view more
Novemer™ EC-1 polymer is a 27% solids, liquid, pre-neutralized polymer dispersed in oil. It is an easy-to-use, multifunctional polymer designed for use in skin care and sun care oil-in-water emulsions. Novemer EC-1 polymer enables elegant, stable emulsions containing active ingredients with electrolytes and suspended inorganic pigments. view less
Compliance Highlights Unavailable
|
|
| Pemulen™ EZ-4U polymer | Lubrizol |
|
Pemulen™ EZ-4U polymer is a polymeric emulsifier that minimizes skin care formulation constraints through simpler processing and greater formulation flexibility in a cost-efficient manner while offering robust emulsion stabilization, freedom from HLB cons...view more
Pemulen™ EZ-4U polymer is a polymeric emulsifier that minimizes skin care formulation constraints through simpler processing and greater formulation flexibility in a cost-efficient manner while offering robust emulsion stabilization, freedom from HLB constraints, stability over a wide pH range, and flexibility for cold or hot processability all at low use levels. It allows the development of a wide variety of textures from a shiny, smooth cream to thin sprayable lotions. Pemulen™ EZ-4U polymer provides a light sensorial profile and robustness to stabilize sophisticated ingredients, such as challenging oil systems, actives, perfumes, UV absorbers, film formers, and optical and sensory enhancers. view less
Compliance Highlights Unavailable
|
|
| Pemulen™ TR-1 polymer | Lubrizol |
|
Pemulen™ TR-1 polymer is a high molecular weight, crosslinked copolymer of acrylic acid and a hydrophobic C10-30 alkyl acrylate co-monomer. It is a versatile, non-ethoxylated polymer designed to create stable and mild oil-in-water emulsions at low use lev...view more
Pemulen™ TR-1 polymer is a high molecular weight, crosslinked copolymer of acrylic acid and a hydrophobic C10-30 alkyl acrylate co-monomer. It is a versatile, non-ethoxylated polymer designed to create stable and mild oil-in-water emulsions at low use levels. It is a great choice for use in many skin care formulations. Pemulen TR-1 polymer should be used with Carbopol® polymers to provide greater thickening properties where higher viscosity emulsions are required. view less
Compliance Highlights Unavailable
|
|
| Pemulen™ TR-2 polymer | Lubrizol |
|
Pemulen™ TR-2 polymer is a polymeric emulsifier is a high molecular weight, crosslinked copolymer of acrylic acid and a hydrophobic C10-30 alkyl acrylate co-monomer. It is a versatile, non-ethoxylated polymer designed to create stable and mild oil-in-wate...view more
Pemulen™ TR-2 polymer is a polymeric emulsifier is a high molecular weight, crosslinked copolymer of acrylic acid and a hydrophobic C10-30 alkyl acrylate co-monomer. It is a versatile, non-ethoxylated polymer designed to create stable and mild oil-in-water emulsions at low use levels. It provides low viscosity emulsions particularly suitable for skin care applications via spray mechanism. view less
Compliance Highlights Unavailable
|
|
| PemuPur™ START polymer | Lubrizol |
|
PemuPur™ START polymer is a unique natural-derived polymeric emulsifier providing excellent stabilization capabilities at low use level while offering a fresh and quick break sensory. This innovative ingredient won Gold in the 2022 Innovation Zone Best In...view more
PemuPur™ START polymer is a unique natural-derived polymeric emulsifier providing excellent stabilization capabilities at low use level while offering a fresh and quick break sensory. This innovative ingredient won Gold in the 2022 Innovation Zone Best Ingredient Award for Functional materials at in-cosmetics® Global. view less
Compliance Highlights Available
|
|
| POLARGEL® CA | AMCOL Health & Beauty Solutions, Inc. |
|
POLARGEL® CA is a selectively mined and specially processed calcium montmorillonite clay supplied as a mircofine powder. It is used in clay masks and other high clay solid formulations. This product is produced under cGMP manufacturing conditions.
Compliance Highlights Available
|
|
| POLARGEL® HV | AMCOL Health & Beauty Solutions, Inc. |
|
POLARGEL® HV is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® HV promotes excellent rheology and fine body to enhance a broad ra...view more
POLARGEL® HV is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® HV promotes excellent rheology and fine body to enhance a broad range of formulations. It is ideal for use in a wide range of cosmetic applications, including acne treatments, antiperspirants, deodorants, creams, and lotions. view less
Compliance Highlights Available
|
|
| Poly-Pore® 120 RE | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 120 RE is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. PP120RE Retinol Delivery System is an off-white to pale yellow, free flowing powder that can be readily ...view more
Poly-Pore® 120 RE is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. PP120RE Retinol Delivery System is an off-white to pale yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders, minimizing the discoloration problems common with many retinol products. Polypore is ideal for use in a wide range of cosmetic applications including anti-aging and skin rejuvenation products, make-ups and foundations with skin-care benefits, facial and body masks, and hand and body lotions. view less
Compliance Highlights Unavailable
|
|
| Poly-Pore® 120TRE Retinol Delivery System | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 120TRE (PP120TRE) is a multi-functional retinol delivery system designed to improve the stability and reduce the irritation of retinol. PP120TRE is BHA-Free and thereby avoids the requirement for a California Proposition 65 warning label on ret...view more
Poly-Pore® 120TRE (PP120TRE) is a multi-functional retinol delivery system designed to improve the stability and reduce the irritation of retinol. PP120TRE is BHA-Free and thereby avoids the requirement for a California Proposition 65 warning label on retinol finished products that contain BHA. PP120TRE also is BHT-Free and uses the antioxidant power of Vitamin E (Tocopherol) to promote the stability of retinol. PP120TRE is an off-white to pale yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders, minimizing the discoloration problems common with many retinol products. view less
Compliance Highlights Unavailable
|
|
| Poly-Pore® 404HA | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 404HA Hyaluronic Acid Delivery System is a multifunctional microparticle delivery system designed to provide sustained release of Sodium Hyaluronate (Hyaluronic Acid) in topical formulations. It offers improved skin hydration, as well as ease o...view more
Poly-Pore® 404HA Hyaluronic Acid Delivery System is a multifunctional microparticle delivery system designed to provide sustained release of Sodium Hyaluronate (Hyaluronic Acid) in topical formulations. It offers improved skin hydration, as well as ease of use and compatibility in formulations. view less
Compliance Highlights Available
|
|
| Promulgen™ D nonionic emulsifier | Lubrizol |
|
Promulgen™ D nonionic emulsifier is ethoxylated cetearyl alcohol compounded with cetearyl alcohol. Promulgen D nonionic emulsifier is 100% active and is supplied as a waxy solid. Its excellent stability at pH levels of 3-12 makes it particularly useful in...view more
Promulgen™ D nonionic emulsifier is ethoxylated cetearyl alcohol compounded with cetearyl alcohol. Promulgen D nonionic emulsifier is 100% active and is supplied as a waxy solid. Its excellent stability at pH levels of 3-12 makes it particularly useful in applications such as depilatories. Also, due to its viscosity-building properties, it is recommended for use in hair relaxers and conditioners. view less
Compliance Highlights Unavailable
|
|
| Promulgen™ G nonionic emulsifier | Lubrizol |
|
Promulgen™ G nonionic emulsifier is ethoxylated cetearyl alcohol compounded with stearyl alcohol. Promulgen G nonionic emulsifier is 100% active and is supplied as a waxy solid. Its excellent stability at pH levels of 3-12 makes it particularly useful in ...view more
Promulgen™ G nonionic emulsifier is ethoxylated cetearyl alcohol compounded with stearyl alcohol. Promulgen G nonionic emulsifier is 100% active and is supplied as a waxy solid. Its excellent stability at pH levels of 3-12 makes it particularly useful in applications such as depilatories. Also, due to its viscosity-building properties, it is recommended for use in hair relaxers and conditioners. view less
Compliance Highlights Available
|
|
| Quickpearl™ IIK pearlizing agent | Lubrizol |
|
Quickpearl™ IIK pearlizing agent is a 34% solids, special surfactant blend designed to be easily incorporated into products using a cold blend, thus imparting pearlescence efficiently. It is commonly used in shampoos, liquid hand soaps, foam baths and oth...view more
Quickpearl™ IIK pearlizing agent is a 34% solids, special surfactant blend designed to be easily incorporated into products using a cold blend, thus imparting pearlescence efficiently. It is commonly used in shampoos, liquid hand soaps, foam baths and other personal care products. view less
Compliance Highlights Unavailable
|
|
| RetinEZ™ Retinol Delivery System | AMCOL Health & Beauty Solutions, Inc. |
|
RetinEZ™ is a sustained-release retinol delivery system that provides the clinically-proven anti-aging benefits of retinol in a stabilized form that greatly simplifies the formulation and manufacture of skin care products. RetinEZ™ is based on the Microsp...view more
RetinEZ™ is a sustained-release retinol delivery system that provides the clinically-proven anti-aging benefits of retinol in a stabilized form that greatly simplifies the formulation and manufacture of skin care products. RetinEZ™ is based on the Microsponge® Natural cellulose-based delivery system that is proven to provide anti-aging efficacy with reduced irritation compared to conventional formulations. RetinEZ™ is free of BHA, BHT and microplastics. view less
Compliance Highlights Available
|
|
| Sensomer™ 10M polymer | Lubrizol |
|
Sensomer™ 10M polymer is a polyquaternium-10 conditioning polymer, optimized to work in combination with Merquat™ polymers. This highly compatible cationic conditioner is useful in a broad range of hair care, skin care, bath and shower products.
Compliance Highlights Unavailable
|
|
| SilSense® Copolyol-1 silicone | Lubrizol |
|
SilSense® Copolyol-1 silicone is a 100% active, dimethicone copolyol blend. It is a proprietary blend of personal care grade polyethylene glycols and dimethicone copolyol (a copolymer of a polydi-methylsiloxane and polyoxyalkylene ether). It is recommende...view more
SilSense® Copolyol-1 silicone is a 100% active, dimethicone copolyol blend. It is a proprietary blend of personal care grade polyethylene glycols and dimethicone copolyol (a copolymer of a polydi-methylsiloxane and polyoxyalkylene ether). It is recommended for use in skin care lotions and creams, personal wash products, hair care applications, and aloe vera gel formulations. view less
Compliance Highlights Available
|
|
| SilSense® DW-18 silicone | Lubrizol |
|
SilSense® DW-18 silicone is a 100% active, dimethicone copolyol ester. It is a water-dispersible liquid wax ester created by the reaction of isostearic acid with an alkyloxy-modified polydimethylsiloxane. SilSense® DW-18 silicone is an easy-to-formulate p...view more
SilSense® DW-18 silicone is a 100% active, dimethicone copolyol ester. It is a water-dispersible liquid wax ester created by the reaction of isostearic acid with an alkyloxy-modified polydimethylsiloxane. SilSense® DW-18 silicone is an easy-to-formulate product which may be used to impart the conditioning benefits of silicone to personal care products without contributing to greasiness or build-up that is normally associated with water-insoluble silicone fluids. view less
Compliance Highlights Unavailable
|
|
| SilSense® SW-12 silicone | Lubrizol |
|
SilSense® SW-12 silicone is a water-soluble liquid wax, dimethicone copolyol ester that is formed through the esterification of coconut fatty acid with dimethicone copolyol. SilSense® SW-12 silicone is an easy-to-formulate product which may be used to imp...view more
SilSense® SW-12 silicone is a water-soluble liquid wax, dimethicone copolyol ester that is formed through the esterification of coconut fatty acid with dimethicone copolyol. SilSense® SW-12 silicone is an easy-to-formulate product which may be used to impart the conditioning benefits of silicone to personal care products without contributing to greasiness or build-up that is normally associated with water-insoluble silicone fluids. It is recommended for use in hair and skin products including creams, body lotions, after-shave balms and gels, shampoos, and conditioners. view less
Compliance Highlights Unavailable
|
|
| Ultrabee™ WD silicone | Lubrizol |
|
Ultrabee™ WD silicone is a 100% active, dimethicone copolyol ester that combines the natural conditioning properties of NF grade white beeswax with the substantivity and surface-active benefits of dimethicone copolyol. It is a nonionic, water-dispersible ...view more
Ultrabee™ WD silicone is a 100% active, dimethicone copolyol ester that combines the natural conditioning properties of NF grade white beeswax with the substantivity and surface-active benefits of dimethicone copolyol. It is a nonionic, water-dispersible wax ester which features a light color and low odor. Ultrabee WD silicone is easily incorporated into hair and skin care systems and may be used to impart the conditioning benefits of silicone to products without contributing to the greasiness and build-up that can be associated with silicone fluid. Ultrabee WD silicone is recommended in products including aftershave balms, mild cleansers, makeup removers, creams, and lotions. view less
Compliance Highlights Unavailable
|
|
| VOLCLAY® NF-BC | AMCOL Health & Beauty Solutions, Inc. |
|
VOLCLAY® NF-BC is a high purity air-classified sodium bentonite, selectively mined, consisting of micronized particles and supplied as a free-flowing powder. It is ideal for use as a suspending agent, viscosifier, binder, and emulsion stabilizer. VOLCLAY®...view more
VOLCLAY® NF-BC is a high purity air-classified sodium bentonite, selectively mined, consisting of micronized particles and supplied as a free-flowing powder. It is ideal for use as a suspending agent, viscosifier, binder, and emulsion stabilizer. VOLCLAY® NF-BC can be used in a wide range of cosmetics applications including brush-on hair color, creams, lotions, eye cosmetics, facial masks, and sunscreens. view less
Compliance Highlights Available
|
