Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
Activated Carbon | Canton Chem, Inc. |
|
Activated Carbon, also known as activated charcoal, is supplied as a black, light powder free from grittiness. It is practically insoluble in all usual solvents.
Compliance Highlights Available
|
|
Adipic Acid | Canton Chem, Inc. |
|
Adipic Acid is also known as Hexanedioic Acid. It is supplied as a white crystalline powder.
Compliance Highlights Available
|
|
Aluminium Ammonium Sulphate 12H2O ACS10 | Canton Chem, Inc. |
|
Aluminium Ammonium Sulphate 12H2O ACS10, also known as Ammonium Aluminium Sulphate, is supplied as a colourless or white crystalline powder. It is soluble in water.
Compliance Highlights Available
|
|
Aluminium Ammonium Sulphate AR | Canton Chem, Inc. |
|
Aluminium Ammonium Sulphate AR, also known as Ammonium Aluminium Sulphate, is supplied as colourless crystals or as a white crystalline powder. It is freely soluble in water, insoluble in ethanol, and is extremely soluble in hot water.
Compliance Highlights Available
|
|
Aluminium Ammonium Sulphate Extra Pure | Canton Chem, Inc. |
|
Aluminium Ammonium Sulphate Extra Pure, also known as Ammonium Aluminium Sulphate, is supplied as colourless crystals or as a crystalline powder. It is freely soluble in water.
Compliance Highlights Available
|
|
Aluminium Chloride Anhydrous | Canton Chem, Inc. |
|
Aluminium Chloride Anhydrous is also known as Aluminium Trichloride or Trichloroaluminium. It is supplied as a yellowish or crystalline powder, and is very soluble in water.
Compliance Highlights Available
|
|
Aluminium Chloride Hydrated | Canton Chem, Inc. |
|
Aluminium Chloride Hydrated is supplied as a faintly yellowish to white crystalline powder. It is very soluble in water.
Compliance Highlights Available
|
|
Aluminium Chloride Hydrated AR | Canton Chem, Inc. |
|
Aluminium Chloride Hydrated AR is supplied as a faintly yellowish to white crystalline powder. It is very soluble in water.
Compliance Highlights Available
|
|
Aluminium Nitrate 9H2O ACS10 | Canton Chem, Inc. |
Aluminium Nitrate 9H2O ACS10 is also known as Aluminum Nitrate 9-Hydrate, Aluminium Nitrate Nonahydrate, and Nitric Acid Aluminium Salt. It is supplied as a colourless or white crystalline powder, or deliquescent solid, and is very soluble in water.
Compliance Highlights Available
|
||
Aluminium Nitrate AR | Canton Chem, Inc. |
Aluminium Nitrate AR is also known as Aluminium Nitrate Nonahydrate or Nitric Acid Aluminium Salt. It is supplied as colourless deliquescent crystals, and is very soluble in water.
Compliance Highlights Available
|
||
Aluminium Nitrate Extra Pure | Canton Chem, Inc. |
Aluminium Nitrate Extra Pure, also known as Nitric Acid Aluminium Salt, is supplied as colourless deliquescent crystals. It is freely soluble in water.
Compliance Highlights Available
|
||
Aluminium Potassium Sulphate | Canton Chem, Inc. |
|
Aluminium Potassium Sulphate is also known as Potassium Alum and Potassium Aluminium Sulphate. It is supplied as colourless crystals or white crystalline powder.
Compliance Highlights Available
|
|
Aluminium Potassium Sulphate ACS10 | Canton Chem, Inc. |
|
Aluminium Potassium Sulphate ACS10, also known as Potassium Alum, is supplied as white crystalline powder. It is soluble in cold water, freely soluble in hot water, and practically insoluble in alcohol.
Compliance Highlights Available
|
|
Aluminium Potassium Sulphate AR | Canton Chem, Inc. |
|
Aluminium Potassium Sulphate AR, also known as Potassium Alum, is supplied as colourless crystals or white crystalline powder. It is freely soluble in water, extremely soluble in hot water, and insoluble in alcohol.
Compliance Highlights Available
|
|
Aluminium Sulphate AR | Canton Chem, Inc. |
Aluminium Sulphate AR, also know as Alum, is supplied as a white crystalline powder. It is very soluble in water, and insoluble in ethanol.
Compliance Highlights Available
|
||
Aluminium Sulphate Hydrated ACS | Canton Chem, Inc. |
|
Aluminium Sulphate Hydrated ACS, also known as Alum, is supplied as a white crystalline powder. It is soluble in cold water, and very soluble in hot water.
Compliance Highlights Available
|
|
Aluminium Sulphate Purified | Canton Chem, Inc. |
Aluminium Sulphate Purified, also known as Alum, is supplied as a white crystalline powder. It is very soluble in water.
Compliance Highlights Available
|
||
Ammondium Chloride ACS10 | Canton Chem, Inc. |
|
Ammondium Chloride ACS10 is also known as Ammonium Muriate, Sal Ammoniac, Salmiac, Amchlor, and Darammon. It is supplied as an odourless white crystalline powder, and is freely soluble in water.
Compliance Highlights Available
|
|
Ammonia Solution 25% NH3 | Canton Chem, Inc. |
|
Ammonia Solution 25% NH3 is also known as Ammonium Hydroxide. It is supplied as a clear liquid, not more than 10 Hazen units in colour with a pungent odour.
Compliance Highlights Available
|
|
Ammonia Solution About 25% NH3 AR | Canton Chem, Inc. |
|
Ammonia Solution About 25% NH3 AR is also known as Ammonium Hydroxide. It is supplied as a clear liquid, not more than 10 Hazen units in colour with a pungent odour.
Compliance Highlights Available
|
|
Ammonium Acetate | Canton Chem, Inc. |
|
Ammonium Acetate, also know as Acetic Acid Ammonium Salt, is supplied as white hygroscopic crystals. It is very soluble in water.
Compliance Highlights Available
|
|
Ammonium Acetate ACS9 | Canton Chem, Inc. |
|
Ammonium Acetate ACS9, also known as Acetic Acid Ammonium Salt, is supplied as white hygroscopic crystalline powder with a faint odour. It is very soluble in water.
Compliance Highlights Available
|
|
Ammonium Acetate Crystal AR | Canton Chem, Inc. |
|
Ammonium Acetate Crystal AR, also known as Acetic Acid Ammonium Salt, is supplied as colourless hygroscopic crystals with a faint odour. It is freely soluble in ethanol and slightly soluble in acetone.
Compliance Highlights Available
|
|
Ammonium Acetate Reagent | Canton Chem, Inc. |
|
Ammonium Acetate Reagent, also known as Acetic Acid Ammonium Salt, is supplied as white hygroscopic crystals with a faint odour. It is very soluble in water.
Compliance Highlights Available
|
|
Ammonium Bicarbonate | Canton Chem, Inc. |
|
Ammonium Bicarbonate, also known as Ammonium Hydrogen Carbonate, is a white crystalline powder with a slight ammonical odour. It is freely soluble in water.
Compliance Highlights Available
|
|
Ammonium Bicarbonate AR | Canton Chem, Inc. |
|
Ammonium Bicarbonate AR, also known as Ammonium Hydrogen Carbonate, is supplied as a white crystalline powder with a slight ammonical odour. It is freely soluble in water.
Compliance Highlights Available
|
|
Ammonium Bromide | Canton Chem, Inc. |
Ammonium Bromide, also known as hydrobromic acid monoammoniate, is supplied as a white crystalline powder. It is soluble in water.
Compliance Highlights Available
|
||
Ammonium Carbonate | Canton Chem, Inc. |
|
Ammonium Carbonate, also known as Hartshorn, is supplied as a white crystalline masse with a strong ammonical odour. It is freely soluble in water.
Compliance Highlights Available
|
|
Ammonium Carbonate ACS10 | Canton Chem, Inc. |
|
Ammonium Carbonate ACS10, also known as Hartshorn, is supplied as a white crystalline powder or masse with strong ammonical odour. It is freely soluble in water.
Compliance Highlights Available
|
|
Ammonium Chloride | Canton Chem, Inc. |
|
Ammonium Chloride is also known as Ammonium Muriate, Sal Ammoniac, Salmiac, Amchlor, and Darammon. It is supplied as a white crystalline powder, and is freely soluble in water.
Compliance Highlights Available
|
|
BELSIL® ADM 1650 | Wacker Chemical Corporation |
BELSIL® ADM 1650 is a non-reactive aminofunctional polydimethylsiloxane with an average viscosity of 1000 mm2/s. The major field of application for this product is hair care. The non-reactive amino functional silicone fluid forms a protective sheath aroun...view more
BELSIL® ADM 1650 is a non-reactive aminofunctional polydimethylsiloxane with an average viscosity of 1000 mm2/s. The major field of application for this product is hair care. The non-reactive amino functional silicone fluid forms a protective sheath around the hair fiber that lasts through several shampooing cycles. BELSIL® ADM 1650 is used mainly in shampoos and hair conditioners. The conditioning properties are highly effective in these applications, resulting in improved wet and dry combability and a pleasant, soft feel. view less
Compliance Highlights Unavailable
|
||
BELSIL® ADM 6057 E | Wacker Chemical Corporation |
|
BELSIL® ADM 6057 E is an O/W-macro-emulsion of an amodimethicone with low amine content, stabilized with a cationic/nonionic emulsifier system. The major field of application for this product is hair care. The reactive amino-functional silicone fluid will...view more
BELSIL® ADM 6057 E is an O/W-macro-emulsion of an amodimethicone with low amine content, stabilized with a cationic/nonionic emulsifier system. The major field of application for this product is hair care. The reactive amino-functional silicone fluid will crosslink upon drying to form a protective sheath around the hair fiber that lasts several shampooing cycles. BELSIL® ADM 6057 E is used in shampoos, cream rinses, and hair treatments. The conditioning properties are highly effective in these applications, resulting in improved wet and dry compatibility and a pleasant, soft feel. view less
Compliance Highlights Unavailable
|
|
BELSIL® ADM 6300 E | Wacker Chemical Corporation |
BELSIL® ADM 6300 E is a nonionic macroemulsion of an aminofunctional polydimethylsiloxane. It is an excellent conditioning agent in hair care applications. This product provides a soft, silky touch and effectively reduces dry and wet combing forces. BELSI...view more
BELSIL® ADM 6300 E is a nonionic macroemulsion of an aminofunctional polydimethylsiloxane. It is an excellent conditioning agent in hair care applications. This product provides a soft, silky touch and effectively reduces dry and wet combing forces. BELSIL® ADM 6300 E is suitable for rinse-off conditioners, hair treatments and shampoos. The product is used to reduce color fade of colored hair in conditioner formulations. view less
Compliance Highlights Unavailable
|
||
BELSIL® ADM 8105 E | Wacker Chemical Corporation |
|
BELSIL® ADM 8105 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. It is suitable for hair care, shampoo, and conditioner applications.
Compliance Highlights Unavailable
|
|
BELSIL® ADM 8301 E | Wacker Chemical Corporation |
BELSIL® ADM 8301 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. This product is an excellent conditioning agent in hair care applications. It provides a soft, silky touch and strongly reduces dry and wet combing forces. BELSIL® ...view more
BELSIL® ADM 8301 E is a nonionic microemulsion of an aminofunctional polydimethylsiloxane. This product is an excellent conditioning agent in hair care applications. It provides a soft, silky touch and strongly reduces dry and wet combing forces. BELSIL® ADM 8301 E reduces color fade of colored hair and protects hair during heat treatments. The product is especially suitable for rinse-off conditioners, hair treatments, masks, pump sprays, conditioning shampoos, or styling applications like mousses. In Shampoos, it allows the formulation of transparent products. view less
Compliance Highlights Unavailable
|
||
BELSIL® CDM 3526 VP | Wacker Chemical Corporation |
|
BELSIL® CDM 3526 VP is a cream colored, pasty silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone paste are in skin protection, skin care, sunscreens, and decorative ...view more
BELSIL® CDM 3526 VP is a cream colored, pasty silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone paste are in skin protection, skin care, sunscreens, and decorative cosmetics.
In skin care products, BELSIL® CDM 3526 VP improves the formulation efficiency and provides a soft, non-sticky skin feel. Its good spreading properties improve distribution of the preparation. It's high substantivity, improved water resistance and moisturizing properties make this alkyl-functional silicone paste an indispensable component of sunscreen products and decorative cosmetics, such as lipsticks, mascara and make-up. view less
Compliance Highlights Unavailable
|
|
BELSIL® CM 1000 | Wacker Chemical Corporation |
|
Belsil® CM 1000 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. Due to its composition, it combines the properties of the low-viscosity, volatile cyclopentasiloxane and the extremely high-viscosity dimethiconol. This product is used in ...view more
Belsil® CM 1000 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. Due to its composition, it combines the properties of the low-viscosity, volatile cyclopentasiloxane and the extremely high-viscosity dimethiconol. This product is used in hair-care and in skin care applications.
Skin care and skin protection preparations containing BELSIL® CM 1000 impart a pleasant, supple feel to skin. It facilitates the distribution of the formulations and improves skin elasticity. It also forms a water-resistant but breathable protective barrier that provides good substantivity and fixation of active ingredients. view less
Compliance Highlights Unavailable
|
|
BELSIL® CM 3092 | Wacker Chemical Corporation |
|
Belsil® CM 3092 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. It is used in hair-care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It facilit...view more
Belsil® CM 3092 is a blend of cyclopentasiloxane and a high-moleculardimethiconol. It is used in hair-care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It facilitates the distribution of the formulations and improves skin elasticity. At the same time, it forms a water-resistant but breathable protective barrier. This provides good substantivity and fixation of active ingredients. Use of BELSIL® CM 3092 in hair-care products yields sleek, shiny hair. view less
Compliance Highlights Unavailable
|
|
BELSIL® CM 7026 VP | Wacker Chemical Corporation |
|
BELSIL® CM 7026 VP is a high melting, white to cream colored, silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone wax is in skin protection, skin care, sunscreens and...view more
BELSIL® CM 7026 VP is a high melting, white to cream colored, silicone wax that is resistant to hydrolysis and has a very high affinity to all kinds of substrates. The main applications of this silicone wax is in skin protection, skin care, sunscreens and decorative cosmetics. In skin care products, it improves the formulation efficiency and provides a soft, non-sticky skin feel while forming an occlusive film, which reduces trans-epidermal water loss.
The high substantivity of BELSIL® CM 7026 VP improves water resistance and moisturizing properties making it an indispensable component of sunscreen products and decorative cosmetics, such as lipsticks, mascara, and make-up. view less
Compliance Highlights Available
|
|
BELSIL® CM 740 | Wacker Chemical Corporation |
BELSIL® CM 740 is a blend of cylcopenta-siloxane and a high molecular silicone gum. It is used in hair care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It improv...view more
BELSIL® CM 740 is a blend of cylcopenta-siloxane and a high molecular silicone gum. It is used in hair care and in skin care applications. Skin care and skin protection preparations containing this product impart a pleasant, supple feel to skin. It improves skin elasticity while forming a water-resistant, but breathable protective barrier. Use of BELSIL® CM 740 in hair-care products yields sleek, shiny hair. Damaged hair regains a natural, healthy appearance. Wet and dry combability are improved, and further damage to the hair cuticles is prevented. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 0.65 | Wacker Chemical Corporation |
|
BELSIL® DM 0.65 is a colorless, clear fluid of low viscosity and high volatility. It can be utilized as a delivery system in antiperspirant and deodorant formulations as well as hair-care products and color-cosmetic compositions. It provides sufficient p...view more
BELSIL® DM 0.65 is a colorless, clear fluid of low viscosity and high volatility. It can be utilized as a delivery system in antiperspirant and deodorant formulations as well as hair-care products and color-cosmetic compositions. It provides sufficient play time in color-cosmetics applications, thereby improving rub-in properties, reducing stickiness, and imparting lubricity and a smooth skin feel. In hair-care products, BELSIL® DM 0.65 supports easy spreading of high-viscosity fluids, improves wet compatibility, and functions as a resin plasticizer in fixative styling products. view less
Compliance Highlights Available
|
|
BELSIL® DM 1 000 000 | Wacker Chemical Corporation |
BELSIL® DM 1 000 000 is a linear, non-reactive, unmodified polydimethylsiloxane. This product is characterized by low surface tension and high spreading coefficient. It is widely used in a diverse range of personal-care formulations. It provides a hydroph...view more
BELSIL® DM 1 000 000 is a linear, non-reactive, unmodified polydimethylsiloxane. This product is characterized by low surface tension and high spreading coefficient. It is widely used in a diverse range of personal-care formulations. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. Simultaneously, it prevents stickiness in skin-care as well as in color-cosmetics formulations. In hair-care products, it improves both wet and dry compatibility, enhances shine, and imparts humidity resistance and soft feel to the hair. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 10 | Wacker Chemical Corporation |
|
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. It is widely used in a highly varied range of personal-care formulations. It is characterized by low surface tension and a high spreading coefficient. Formulations with this product...view more
BELSIL® DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane. It is widely used in a highly varied range of personal-care formulations. It is characterized by low surface tension and a high spreading coefficient. Formulations with this product have better spreading properties and can be easily distributed on the skin. In these formulations, BELSIL® DM 10 imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 100 | Wacker Chemical Corporation |
|
BELSIL® DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor,...view more
BELSIL® DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 100 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 1000 | Wacker Chemical Corporation |
|
BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor...view more
BELSIL® DM 1000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 1000 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 12 500 | Wacker Chemical Corporation |
BELSIL® DM 12 500 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficients. It is used in a highly varied range of cosmetic applications. It provides a hydrophobic, protective, but b...view more
BELSIL® DM 12 500 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficients. It is used in a highly varied range of cosmetic applications. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. In hair-care products, BELSIL® DM 12 500 is among the most commonly used conditioning additive. It improves both wet and dry combability, enhances shine, and imparts a soft feel to the hair. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 20 | Wacker Chemical Corporation |
|
BELSIL® DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane that is characterized by low surface tension and a high spreading coefficient. It is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM ...view more
BELSIL® DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane that is characterized by low surface tension and a high spreading coefficient. It is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM 20 have better spreading properties and can be easily distributed on the skin. In these formulations, it imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 300000 | Wacker Chemical Corporation |
|
BELSIL® DM 300000 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and high spreading coefficients. This product is widely used in a diverse range of personal care formulations. It provides a hydrophobic, pro...view more
BELSIL® DM 300000 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and high spreading coefficients. This product is widely used in a diverse range of personal care formulations. It provides a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency. It improves the water resistance of various products, such as sun screens. In hair-care products, it improves both wet and dry combability, enhances shine, and imparts humidity resistance and a soft feel to the hair. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 3096 | Wacker Chemical Corporation |
BELSIL® DM 3096 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high viscosity dimethiconol. In skin care formulations, it provide...view more
BELSIL® DM 3096 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high viscosity dimethiconol. In skin care formulations, it provides a water-resistant, but breathable non-occlusive protection barrier which provides good substantivity and fixation of active ingredients. In hair-care products, it yields sleek, shiny hair, regains the natural, healthy look to damaged hair, wet and dry compatibility are improved, and further damage to the hair cuticles is prevented. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 3112 VP | Wacker Chemical Corporation |
|
BELSIL® DM 3112 VP is an anionic emulsion of a high-viscosity dimethiconol. The main field of application for this product is hair care. It is an excellent conditioning additive, especially in formulations for rinse-off or leave-in conditioners. It improv...view more
BELSIL® DM 3112 VP is an anionic emulsion of a high-viscosity dimethiconol. The main field of application for this product is hair care. It is an excellent conditioning additive, especially in formulations for rinse-off or leave-in conditioners. It improves dry and wet compatibility as well as the wet and dry feel of the hair. Due to its conditioning properties, BELSIL® DM 3112 VP can also be used in other formulations, such as shampoos and hair-styling products. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 350 | Wacker Chemical Corporation |
|
BELSIL® DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this product has high permeability to gases (e.g. water vapor, oxygen), ...view more
BELSIL® DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this product has high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 350 is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 3560 VP | Wacker Chemical Corporation |
Belsil® DM 3560 VP is an anionic emulsion of a high-viscosity dimethiconol. The dimethiconol is synthesized in-situ in the emulsion system and is adjusted to a visosity of approx. 60.000 mm²/s. The main field of application for this product is hair care. ...view more
Belsil® DM 3560 VP is an anionic emulsion of a high-viscosity dimethiconol. The dimethiconol is synthesized in-situ in the emulsion system and is adjusted to a visosity of approx. 60.000 mm²/s. The main field of application for this product is hair care. BELSIL® DM 3560 VP is an excellent conditioning additive, especially when formulated into shampoo, rinse-off or leave-in conditioners. It improves wet and dry combability as well as the wet and dry feel of the hair. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 5 | Wacker Chemical Corporation |
|
Belsil® DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen),...view more
Belsil® DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. BELSIL® DM 5 is widely used in a highly varied range of personal care formulations. Formulations with BELSIL® DM 5 have better spreading properties and can be easily distributed on the skin. It imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 50 | Wacker Chemical Corporation |
BELSIL® DM 50 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen)...view more
BELSIL® DM 50 is a linear, non-reactive, unmodified polydimethylsiloxane characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin. It is widely used in a highly varied range of personal care formulations.
Formulations with BELSIL® DM 50 have better spreading properties and can be easily distributed on the skin. It imparts a hydrophobic, protective but breathable barrier to the skin, simultaneously minimizing stickiness. It reduces whitening and imparts a soft emolliency to the skin. view less
Compliance Highlights Unavailable
|
||
BELSIL® DM 500 | Wacker Chemical Corporation |
|
BELSIL® DM 500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosme...view more
BELSIL® DM 500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is used in a broad range of personal care formulations as an emollient. It allows formulators to adjust spreadability and conditioning effects. Whitening and stickiness of cosmetic products can be reduced and skin feel can be optimized. This product has a density at 25°C of approx. 0,97 g/cm^3, a surface tension at 25°C of 0,021 N/m, and a viscosity, dynamic at 25°C of 500 mPa.s. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 500000 | Wacker Chemical Corporation |
|
BELSIL® DM 500000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 500 000 mm²/s. BELSIL® DM 500000 is characterized by low surface tension and high spreading coefficient. Due to its flexible polymer back...view more
BELSIL® DM 500000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 500 000 mm²/s. BELSIL® DM 500000 is characterized by low surface tension and high spreading coefficient. Due to its flexible polymer backbone, this dimethicone has high permeability to gases (e.g. water, vapour, oxygen), which allows respiration of the skin.
High-viscous BELSIL® DM 500 000 is widely used in a diverse range of personal-care formulations. Dimethicones provide a hydrophobic, protective, but breathable barrier for the skin, imparting softness and emolliency, giving hair a soft feel and enhanced shine. view less
Compliance Highlights Unavailable
|
|
BELSIL® DM 5102 E | Wacker Chemical Corporation |
|
BELSIL® DM 5102 E is a non-ionic emulsion of a high-viscosity dimethicone. It is suitable for hair care, shampoo, and conditioner formulations.
Compliance Highlights Unavailable
|
|
BELSIL® DM 5700 E | Wacker Chemical Corporation |
|
BELSIL® DM 5700 E is a small droplet size emulsion of a high-viscosity dimethicone fluid with a sugar based emulsifier system from renewable materials.
Compliance Highlights Unavailable
|
|
BELSIL® DM 60000 | Wacker Chemical Corporation |
|
BELSIL® DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a Dimethicone with a viscosity of 60000 mm²/s. BELSIL® DM 60000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer ba...view more
BELSIL® DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a Dimethicone with a viscosity of 60000 mm²/s. BELSIL® DM 60000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.
Dimethicones improves the water resistance of various products, such as sun screens. Simultaneously, they prevent stickiness in skin-care as well as in color-cosmetics formulations. In hair-care products, high-viscous dimethicones are among the most commonly used conditioning additives. They improve both wet and dry combability, impart humidity resistance and a soft feel to the hair, and enhance shine. view less
Compliance Highlights Unavailable
|
|
BELSIL® DMC 6031 | Wacker Chemical Corporation |
|
BELSIL® DMC 6031 is a copolymer of polydimethylsiloxane and organic glycol. It is ideally used in hair-fixative compositions, acting as a resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone sur...view more
BELSIL® DMC 6031 is a copolymer of polydimethylsiloxane and organic glycol. It is ideally used in hair-fixative compositions, acting as a resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stabilize the foam, confers mild conditioning benefits on hair and skin, and promotes formation of clear products. BELSIL® DMC 6031 has a density at 25°C of 1,03 g/cm³, a cloud point (1% solution in water) of 41-43, and a refractive index at 25°C of 1,452. view less
Compliance Highlights Unavailable
|
|
BELSIL® DMC 6038 | Wacker Chemical Corporation |
|
BELSIL® DMC 6038 is a wax-like, water disperable dimethicone copolyol that exhibits good compatibility with polar ingredients. BELSIL® DMC 6038 is used in skincare and hair-care formulations, as well as in deodorants because of its good compatibility with...view more
BELSIL® DMC 6038 is a wax-like, water disperable dimethicone copolyol that exhibits good compatibility with polar ingredients. BELSIL® DMC 6038 is used in skincare and hair-care formulations, as well as in deodorants because of its good compatibility with other ingredients. Its low melting point improves the distribution of creams, lotions, deodorant sticks and roll-on deodorants. This product has a refractive index at 35°C of 1,458, a melting point of approx. 30°C, and a flash point of 241°C. view less
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 10 | Wacker Chemical Corporation |
|
BELSIL® eco DM 10 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 10 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 100 | Wacker Chemical Corporation |
|
BELSIL® eco DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 100 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 20 | Wacker Chemical Corporation |
|
BELSIL® eco DM 20 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 20 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 350 | Wacker Chemical Corporation |
|
BELSIL® eco DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 350 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care.
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 5 | Wacker Chemical Corporation |
|
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun ca...view more
BELSIL® eco DM 5 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 5 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair and skin care, and sun care. view less
Compliance Highlights Unavailable
|
|
BELSIL® eco DM 60.000 | Wacker Chemical Corporation |
|
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun ca...view more
BELSIL® eco DM 60000 is a linear, non-reactive, unmodified polydimethylsiloxane, based on renewable raw materials. BELSIL® eco DM 60000 is characterized by low surface tension and a high spreading coefficient. It is ideal for use in hair, skin, and sun care. view less
Compliance Highlights Unavailable
|
|
BELSIL® GB 1020 | Wacker Chemical Corporation |
|
BELSIL® GB 1020 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high-viscosity dimethiconol. The excellent spreading of the low-vi...view more
BELSIL® GB 1020 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high-viscosity dimethiconol. The excellent spreading of the low-viscosity dimethicones allows a good distribution of the high-viscosity conditioning agent dimethiconol.
BELSIL® GB 1020 is used in hair, skin, and sun care applications. It has a viscosity, dynamic at 25°C of approx. 1500 mPa.s, a refractive index at 25°C of 1,398, and a density at 25°C of 0,93 g/cm³. view less
Compliance Highlights Unavailable
|
|
BELSIL® OW 1500 | Wacker Chemical Corporation |
BELSIL® OW 1500 is a copolymer of polydimethylsiloxane and organic glycol. In hair-fixative compositions, it acts as resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stab...view more
BELSIL® OW 1500 is a copolymer of polydimethylsiloxane and organic glycol. In hair-fixative compositions, it acts as resin plasticizer, reducing brittleness and flaking of organic resins. In shampoos and shower gels, this silicone surfactant helps to stabilize the foam, confers mild conditioning benefits on hair and skin and promotes formation of clear products. In creams and lotions, it acts as co-emulsifiers providing oil-in-water emulsification benefits, improving skin feel and product stability. BELSIL® OW 1500 has a cloud point of 38,5-40,5%, an ignition temperature (liquids) of > 400°C, and a flash point of > 100°C. view less
Compliance Highlights Unavailable
|
||
BELSIL® OW 2100 DE | Wacker Chemical Corporation |
|
BELSIL® OW 2100 DE is a copolymer of polydimethylsiloxane and organic glycol. BELSIL® OW 2100 DE has good compatibility with a wide range of cosmetic ingredients, such as water and alcohol. It is stable in water systems.
Compliance Highlights Unavailable
|
|
BELSIL® P 1101 | Wacker Chemical Corporation |
|
BELSIL® P 1101 is a is a silicone-organic hybrid material that is used as a hair styling and conditioning polymer, and is provided as a 50% solution in denatured ethanol. It combines the strong hold properties of a hair styling resin with typical silicone...view more
BELSIL® P 1101 is a is a silicone-organic hybrid material that is used as a hair styling and conditioning polymer, and is provided as a 50% solution in denatured ethanol. It combines the strong hold properties of a hair styling resin with typical silicone properties like softness and silkiness, to be used in aerosols, pump sprays and balm/gel-type formulations. This product comes in the form of an ethanol solution, has a solids content of approx. 50% and an acid number/saponification number of 8-33mg KOH/g. view less
Compliance Highlights Available
|
|
BELSIL® PDM 1000 | Wacker Chemical Corporation |
|
BELSIL® PDM 1000 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cos...view more
BELSIL® PDM 1000 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosmetic raw materials. This product has a flash point of approx. 285°C, a viscosity, kinematic at 25°C of approx. 1000 mm²/s, and a density at 25°C (at 1013 hPa) of approx. 1,07 g/cm³.
It is used in all kinds of cosmetics formulations, but mostly in hair care compositions and color cosmetic due to their shine-enhancing benefits. BELSIL® PDM 1000 reduces the stickiness of formulations containing acrylic acid polymers. It is an excellent emollient in skincare products, imparts a very pleasant feel to the skin, and provides water repellency. view less
Compliance Highlights Available
|
|
BELSIL® PDM 20 | Wacker Chemical Corporation |
|
BELSIL® PDM 20 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosme...view more
BELSIL® PDM 20 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers clear advantages over dimethicones with regard to skin feel, shine and compatibility with other cosmetic raw materials. It is used in all kinds of cosmetics formulations, but mostly in hair care compositions and color cosmetic due to their shine-enhancing benefits. This product has a flash point of approx. 170°C, an ignition temperature (liquids) of approx. 450°C, and a refractive index at 25°C of 1,437. view less
Compliance Highlights Available
|
|
BELSIL® PF 200 | Wacker Chemical Corporation |
|
BELSIL® PF 200 is a multifunctional phenyl modified polydimethylsiloxane, the chemical structure of which has been carefully designed to provide multiple attractive benefits such as high refractive index, amphiphilicity, soft feel and easy emulsifiabilit...view more
BELSIL® PF 200 is a multifunctional phenyl modified polydimethylsiloxane, the chemical structure of which has been carefully designed to provide multiple attractive benefits such as high refractive index, amphiphilicity, soft feel and easy emulsifiability. view less
Compliance Highlights Unavailable
|
|
BELSIL® PF 22 | Wacker Chemical Corporation |
|
BELSIL® PF 22 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. It is typically used as a gloss agent in hair ...view more
BELSIL® PF 22 is a phenyl-modified polydimethylsiloxane characterized by having a higher refractive index than dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. It is typically used as a gloss agent in hair and color cosmetics. view less
Compliance Highlights Unavailable
|
|
BELSIL® PMS MK POWDER | Wacker Chemical Corporation |
|
BELSIL® PMS MK POWDER is a solid, solvent-free silicone resin. This highly cross-linked silicone resin is primarily used for its film-forming attributes, it provides improved water-resistance and is a processing aid in pigment grinding and pressed-powder ...view more
BELSIL® PMS MK POWDER is a solid, solvent-free silicone resin. This highly cross-linked silicone resin is primarily used for its film-forming attributes, it provides improved water-resistance and is a processing aid in pigment grinding and pressed-powder applications. It prevents agglomeration and maintains free-flowing characteristics in loose-powder products as well, which is beneficial in powder-filling devices. This product is a white, odorless powder, and has a softening point of 50-60°C. view less
Compliance Highlights Available
|
|
BELSIL® RG 100 | Wacker Chemical Corporation |
|
BELSIL® RG 100 elastomer gel is an organosiloxane polymer dispersed in cyclopentasiloxane. It is a semitransparent gel that functions as a thickener in formulations while delivering smooth applications. Under shear stress BELSIL® RG 100 thins and allows e...view more
BELSIL® RG 100 elastomer gel is an organosiloxane polymer dispersed in cyclopentasiloxane. It is a semitransparent gel that functions as a thickener in formulations while delivering smooth applications. Under shear stress BELSIL® RG 100 thins and allows easy incorporation of cosmetic ingredients like pigments. It is suitable for skin care, sun care, and color cosmetic formulations. view less
Compliance Highlights Unavailable
|
|
BELSIL® RG 90 | Wacker Chemical Corporation |
|
BELSIL® RG 90 elastomer gel is a crosslinked high-molecular weight organosiloxane polymer dispersed in isododecane. It is delivered as a transparent to semitransparent gel. It is suitable for skin care, sun care, and color cosmetic formulations.
Compliance Highlights Unavailable
|
|
BELSIL® SDM 5055 VP | Wacker Chemical Corporation |
|
BELSIL® SDM 5055 VP is a silicone wax that displays good compatibility with many cosmetic raw materials including oils, waxes, fatty alcohols, and fatty acids. The main fields of application of this alkyl-functional silicone is skin protection, skin care ...view more
BELSIL® SDM 5055 VP is a silicone wax that displays good compatibility with many cosmetic raw materials including oils, waxes, fatty alcohols, and fatty acids. The main fields of application of this alkyl-functional silicone is skin protection, skin care and color cosmetics. In creams and lotions it improves the efficacy of the formulation and confers a non-sticky, soft skin feel. It can also be used in color cosmetics, lipstick, mascara, and make-up formulations. BELSIL® SDM 5055 VP has a melting point of approx. 30°C, a flash point of 160°C, a viscosity (dynamic at 50°C) of approx. 400 mPa.s, and a density at 50°C of approx. 0,86 g/cm³. view less
Compliance Highlights Available
|
|
BELSIL® SPG 128 VP | Wacker Chemical Corporation |
|
BELSIL® SPG 128 VP is supplied as a 20% active solution in cyclopentasiloxane,containing a nonionic surfactant with an HLB of approximately 6-7. This silicone polymer is synthesized using a renewable, sugar-based component. This product was designed speci...view more
BELSIL® SPG 128 VP is supplied as a 20% active solution in cyclopentasiloxane,containing a nonionic surfactant with an HLB of approximately 6-7. This silicone polymer is synthesized using a renewable, sugar-based component. This product was designed specifically as a water-in-oil or water-in-silicone emulsifier for compositions comprising volatile silicones or non-polar organic fluids as the continuous phase.
BELSIL® SPG 128 VP is an excellent emulsifier for water-in-oil an water-in-silicone systems in skincare, sun care an decorative cosmetics. This product has a refractive index at 25°C of 1,400, an HLB value of 6-7, and a density at 25°C of approx. 0,96 g/cm³. view less
Compliance Highlights Available
|
|
BELSIL® SPR 45 VP | Wacker Chemical Corporation |
|
BELSIL® SPR 45 VP is a solvent-free phenyl silicone resin. This product is produced for use as a film former in cosmetic applications, specifically color cosmetics, skin care and sun care products. It has a refractive index (82°C, liquid) of 1,55, a refra...view more
BELSIL® SPR 45 VP is a solvent-free phenyl silicone resin. This product is produced for use as a film former in cosmetic applications, specifically color cosmetics, skin care and sun care products. It has a refractive index (82°C, liquid) of 1,55, a refractive index (25°C, film) of 1,57, and a softening point of 50-70°C. view less
Compliance Highlights Unavailable
|
|
BELSIL® TMS 803 | Wacker Chemical Corporation |
|
BELSIL® TMS 803 is the co-hydrolysis product of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). It can be compounded with polydimethylsiloxanes. This highly cross-linked silicone resin is primarily used for its film-forming attributes. In s...view more
BELSIL® TMS 803 is the co-hydrolysis product of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). It can be compounded with polydimethylsiloxanes. This highly cross-linked silicone resin is primarily used for its film-forming attributes. In sunscreen, skincare and color cosmetic applications, the Trimethylsiloxysilicate BELSIL® TMS 803 is an excellent water-resistant additive and helps to hold pigments in place. This product has a particle size of 10 µm, and a bulk density of 250 kg/m³. view less
Compliance Highlights Unavailable
|
|
BELSIL® W 3230 | Wacker Chemical Corporation |
|
BELSIL® W 3230 is a mixture of a dimethicone with a stearoxy-modified polydimethylsiloxane. It is a white wax and affords good protection against aqueous media. In skin-care formulations, BELSIL® W 3230 forms a protective barrier, thereby providing moistu...view more
BELSIL® W 3230 is a mixture of a dimethicone with a stearoxy-modified polydimethylsiloxane. It is a white wax and affords good protection against aqueous media. In skin-care formulations, BELSIL® W 3230 forms a protective barrier, thereby providing moisturizing benefits. It imparts a non-greasy, soft, velvety feel to the skin and offers excellent compatibility with most cosmetic raw materials. In color-cosmetics formulations, it enhances gloss and brilliance. view less
Compliance Highlights Unavailable
|
|
CAVAMAX® W6 PHARMA | Wacker Chemical Corporation |
CAVAMAX® W6 is pharmaceutical grade alpha-cyclodextrin, with 6 glucose units, it has the smallest cavity of the parent cyclodextrins. It is useful for solubilizing, stabilizing or delivering small molecules, making it ideally used in formulations for phar...view more
CAVAMAX® W6 is pharmaceutical grade alpha-cyclodextrin, with 6 glucose units, it has the smallest cavity of the parent cyclodextrins. It is useful for solubilizing, stabilizing or delivering small molecules, making it ideally used in formulations for pharmaceuticals, hair care, skin care and shaving formulations. This product has loss on drying of max. 11.0%, a specific rotation of 147.0-152.0°, and a gamma-cyclodextrin content of max. 0.25%. view less
Compliance Highlights Available
|
||
CAVAMAX® W7 PHARMA | Wacker Chemical Corporation |
|
CAVAMAX® W7 PHARMA is pharmaceutical grade beta-cyclodextrin that has seven glucose units in the mid-size cavity of the parent cyclodextrins. It is useful for stabilizing, solubilizing or delivering intermediate size molecules, e.g. menthol; and is ideall...view more
CAVAMAX® W7 PHARMA is pharmaceutical grade beta-cyclodextrin that has seven glucose units in the mid-size cavity of the parent cyclodextrins. It is useful for stabilizing, solubilizing or delivering intermediate size molecules, e.g. menthol; and is ideally used in formulations for pharmaceuticals, hair care, skin care and shaving formulations. This product has a specific rotation of 160.9-164.0°, a water content of 14.0%, and a pH value of 5-8. view less
Compliance Highlights Available
|
|
CAVAMAX® W8 PHARMA | Wacker Chemical Corporation |
CAVAMAX® W8 PHARMA has a specific rotation of 174.0-180.0°, a water content of max. 11.0%, and a content (on dry basis) of min. 98.0-102.0%. It is a pharmaceutical grade gamma-cyclodextrin, with 8 glucose units has the largest cavity of the parentcyclodex...view more
CAVAMAX® W8 PHARMA has a specific rotation of 174.0-180.0°, a water content of max. 11.0%, and a content (on dry basis) of min. 98.0-102.0%. It is a pharmaceutical grade gamma-cyclodextrin, with 8 glucose units has the largest cavity of the parentcyclodextrins and is the most water soluble. It is useful for solubilizing, stabilizing or delivering larger molecules; e.g. steroids, macrocyclics, oils, lipids, etc. This product is ideally used in hair care, shaving, sun care, sunscreens, and formulations for pharmaceuticals. view less
Compliance Highlights Available
|
||
CAVASOL® W7 HP Pharma | Wacker Chemical Corporation |
CAVASOL® W7 HP Pharma is pharmaceutical gradehydroxypropyl-beta-cyclodextrin that is a highly soluble beta-cyclodextrin derivative when concentrated solutions are needed. This product is recommended for formulations for pharmaceuticals and skin care appli...view more
CAVASOL® W7 HP Pharma is pharmaceutical gradehydroxypropyl-beta-cyclodextrin that is a highly soluble beta-cyclodextrin derivative when concentrated solutions are needed. This product is recommended for formulations for pharmaceuticals and skin care applications, has a bulk density of 200 - 300 kg/m³, a melting point of 120-160°C, and a solubility in water at 25°C of 2300 g/l. view less
Compliance Highlights Available
|
||
HDK® H15 | Wacker Chemical Corporation |
|
HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers...view more
HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 acts as a free flow additive in the production of technical powders. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a residual silanol content of 50%, and a pH value of 3,8-4,8. view less
Compliance Highlights Available
|
|
HDK® H18 | Wacker Chemical Corporation |
HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. Th...view more
HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a carbon content of approx. 4,5%, and a pH value of 4,0-6,8. view less
Compliance Highlights Available
|
||
HDK® H20 | Wacker Chemical Corporation |
HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be appl...view more
HDK® H20 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H20 acts as a free flow additive in the production of powder coatings. It can be applied in adhesives, coatings, printing inks, skin care, decorative cosmetics and more. view less
Compliance Highlights Available
|
||
HDK® H2000 | Wacker Chemical Corporation |
HDK® H2000 is a synthetic, hydrophobic, amorphous silica applied as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents.
Compliance Highlights Available
|
||
HDK® H30 | Wacker Chemical Corporation |
HDK® H30 is a synthetic, hydrophobic, amorphous silica applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts a...view more
HDK® H30 is a synthetic, hydrophobic, amorphous silica applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the production of powder coatings. view less
Compliance Highlights Available
|
||
HDK® N20 | Wacker Chemical Corporation |
HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in el...view more
HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders. view less
Compliance Highlights Unavailable
|
||
HDK® N20D | Wacker Chemical Corporation |
|
HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, a...view more
HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, and various other applications. This product has a BET surface of 170-230 m2/g, a loss of weight of < 2%, and a sieve residue of < 0.03%. view less
Compliance Highlights Unavailable
|
|
HDK® T30 | Wacker Chemical Corporation |
|
HDK® T30 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastom...view more
HDK® T30 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. It has a loss of weight at 1000°C / 2h of < 2%, a density at 20°C (SiO²) of approx. 2,2 g/cm^3, and a refraction index at 20°C of 1,46. view less
Compliance Highlights Unavailable
|
|
HTEssence® HYDROXYTYROSOL LIQUID COSMETICS | Wacker Chemical Corporation |
HTEssence® Hydroxytyrosol Liquid is a nature identical Hydroxytyrosol. Hydroxytyrosol is an ingredient in olives, functioning as a highly active antioxidant in the body.
Compliance Highlights Unavailable
|
||
HTEssence® HYDROXYTYROSOL POWDER COSMETICS | Wacker Chemical Corporation |
HTEssence® Hydroxytyrosol Powder is a nature identical Hydroxytyrosol (GRAS), formulated with maltodextrin. It is considered one of the most powerful antioxidants, its oxygen radical absorbance capacity is ten times that of green tea, and more than two ti...view more
HTEssence® Hydroxytyrosol Powder is a nature identical Hydroxytyrosol (GRAS), formulated with maltodextrin. It is considered one of the most powerful antioxidants, its oxygen radical absorbance capacity is ten times that of green tea, and more than two times greater than that of CoQ10 and quercetin. view less
Compliance Highlights Unavailable
|
||
L-Cysteine Hydrochloride Monohydrate Pharma Grade | Wacker Chemical Corporation |
L-Cysteine Hydrochloride Monohydrate Pharma Grade is a white or almost white, crystalline powder or colourless crystals, that is freely soluble in water, and slightly soluble in alcohol. L-Cysteine is one of the 20 natural amino acids and, besides methion...view more
L-Cysteine Hydrochloride Monohydrate Pharma Grade is a white or almost white, crystalline powder or colourless crystals, that is freely soluble in water, and slightly soluble in alcohol. L-Cysteine is one of the 20 natural amino acids and, besides methionine, the only one which contains sulfur. This product is recommended for building blocks, formulations for pharmaceuticals and hair-perm formulations applications. view less
Compliance Highlights Available
|
||
VINNAPAS® EN 1020 | Wacker Chemical Corporation |
VINNAPAS® EN 1020 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in tableware, absorbent hygiene products, and toilet paper. This product has a solid c...view more
VINNAPAS® EN 1020 is a self crosslinking, plasticizer-free, aqueous polymer dispersion that is produced from the monomers vinyl acetate and ethylene. It is ideally used in tableware, absorbent hygiene products, and toilet paper. This product has a solid constituent of 49.0-51.0%, a viscosity (dynamic at 23.0°C) of 50.0 - 650.0 mPa.s, and a pH value of 3.0-4.0. view less
Compliance Highlights Unavailable
|