| AACH-7172 | Elementis |
|
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and...view more
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and also contributes to reduced visible white residue. Normal application will provide a minimum of 24 hours wetness and odor protection. view less
Compliance Highlights Unavailable
|
|
| AAZG-531 | Elementis |
|
AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.
Compliance Highlights Available
|
|
| AAZG-7167 | Elementis |
|
AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.
Compliance Highlights Available
|
|
| ACH-321 | Elementis |
|
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shi...view more
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shipping weight. view less
Compliance Highlights Unavailable
|
|
| AZG-364 | Elementis |
|
AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.
Compliance Highlights Available
|
|
| AZG-368 | Elementis |
|
AZG-368 is an aqueous solution of standard aluminum zirconium tetrachlorohydrex glycine that out- performs Al-only actives. AZG-368 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as aqueous creams and clear gels.
Compliance Highlights Available
|
|
| AZG-370 | Elementis |
|
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in ...view more
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in anhydrous suspension sticks, roll-ons and soft solids. view less
Compliance Highlights Available
|
|
| AZG-442 | Elementis |
|
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqu...view more
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqueous creams. view less
Compliance Highlights Available
|
|
| BENTONE GEL® 1002 V | Elementis |
|
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL...view more
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® 1002 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® 1002 V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ABO V | Elementis |
|
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil ha...view more
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil has a unique molecular sructure with a high percentage of unsaturated C22 fatty acids. It is a non-greasy oil providing an elegant cushioning skin feel and a natural luster, lubricity and softeness to hair, as well as aiding pigment dispersion in decorative cosmetics. BENTONE GEL® ABO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ABO V is an excellent alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® CAO V | Elementis |
|
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® ...view more
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® CAO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® DM5 V | Elementis |
|
BENTONE GEL® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone.
Compliance Highlights Unavailable
|
|
| BENTONE GEL® EUG V | Elementis |
|
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also pa...view more
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® EUG V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® GTCC V | Elementis |
|
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BE...view more
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® GTCC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® GTCC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® HS V | Elementis |
|
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control ...view more
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IHD V | Elementis |
|
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is ...view more
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IHD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IPM V | Elementis |
|
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based...view more
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IPM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ISD V | Elementis |
|
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is...view more
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ISD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® LC V | Elementis |
|
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological cont...view more
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the oil phase of cosmetics. It is an easily spreadable, volatile and non-oily emollient, which leaves a soft, non-tacky skin feel. view less
Compliance Highlights Available
|
|
| BENTONE GEL® LIP V | Elementis |
|
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed...view more
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. BENTONE GEL® LIP V provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances aesthetics by masking greasy and tacky components and imparts a pleasant residual silkiness on the skin. BENTONE GEL® LIP V is especially designed to impart cushion and slip to lip products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V | Elementis |
|
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is a...view more
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V HV | Elementis |
|
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particula...view more
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V HV is an alternative to traditional polymer or cellulose-based thickeners
for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OLV V | Elementis |
|
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTON...view more
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTONE GEL® OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OLV V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OMS V | Elementis |
|
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V i...view more
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OMS V is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTIS V | Elementis |
|
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to i...view more
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films. BENTONE GEL® PTIS V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin, enhances UV protection in sunscreens. BENTONE GEL® PTIS V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTM V | Elementis |
|
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheologica...view more
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky, skin feel and improves the gloss and softness of hair. BENTONE GEL® PTM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® PTM V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® SS71 V | Elementis |
|
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rholog...view more
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rhological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® SS71 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® SS71 V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® TN V | Elementis |
|
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also par...view more
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® TN V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V | Elementis |
|
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-...view more
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-5 PC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V HV | Elementis |
|
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also par...view more
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V | Elementis |
|
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V ...view more
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V is an alternative to traditional polymer or cellulose -based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V HV | Elementis |
|
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also partic...view more
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS1 V | Elementis |
|
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological contro...view more
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. BENTONE GEL® VS1 V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS1 V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 1100 | Elementis |
|
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control witho...view more
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity.
BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2000 | Elementis |
|
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirem...view more
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2001 | Elementis |
|
BENTONE HYDROCLAY™ 2001 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2100 | Elementis |
|
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension con...view more
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 550 | Elementis |
|
BENTONE HYDROCLAY™ 550 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 900 | Elementis |
|
BENTONE HYDROCLAY™ 900 is an organically-modified hectorite clay additive designed for the water phase of cosmetics. It's a highly efficient thickener providing significantly higher viscosity than other clay-based additives.
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WN | Elementis |
|
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE ...view more
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WO | Elementis |
|
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a...view more
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE® LUXE WO ideal for all skin types. BENTONE® LUXE WO can be used in color cosmetics or sunscreens to disperse and suspend pigments and actives. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WS | Elementis |
|
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. I...view more
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. It improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This grade is designed to impart rheological control and suspension to silicone-based cosmetics and emulsion systems. It provides thermostable viscosity control of the emulsion's oil phase. It aids in dispersing pigments and sunscreen actives for even coverage. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE XO | Elementis |
|
BENTONE® LUXE XO provides emulsification and rheological properties for silicone free water in oil systems. It also creates extremely stable emulsions with the ability to create a variety of textures.
Compliance Highlights Available
|
|
| BETAFAN™ M | Elementis |
|
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine sys...view more
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine systems (e.g. alpha olefin sulfonates) tend to irritate because they defat tissue. Therefore, formulators add unsaturated molecules such as oleyl amides and oleyl betaines to mitigate the irritation, but these materials tend to oxidize to aldehydes and do not smell good. As a result, high fragrance levels are required. BETAFAN-M systems reduce this effect. BETAFAN™ M can be used in surfactant and nonsurfactant systems for effective conditioning. view less
Compliance Highlights Unavailable
|
|
| CHLORHYDROL 50 | Elementis |
|
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and cle...view more
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and clear pump sprays. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| EA-3105 | Elementis |
|
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly use...view more
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly useful in emulsions and can be used in ""cold process"" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. EA-3105 is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| EXMOLLIENT® 6038 | AMCOL Health & Beauty Solutions, Inc. |
|
EXMOLLIENT® 6038 is a Microbead-Free Waters Act of 2015 compliant, multi-functional delivery system capable of “self-regulated” exfoliation while delivering the ingredients entrapped in their core. EXMOLLIENT® scrub particles slowly break down into smalle...view more
EXMOLLIENT® 6038 is a Microbead-Free Waters Act of 2015 compliant, multi-functional delivery system capable of “self-regulated” exfoliation while delivering the ingredients entrapped in their core. EXMOLLIENT® scrub particles slowly break down into smaller, softer particles minimizing the potential for over-scrubbing and the associated irritation. As the particles break down, this product delivers the ingredient entrapped in its core. Through the delivery of mineral oil, EXMOLLIENT® 6038 helps provide exceptional after-feel and the unique ability for skin protectant claims from an exfoliant. view less
Compliance Highlights Unavailable
|
|
| EXMOLLIENT® 7100 | AMCOL Health & Beauty Solutions, Inc. |
|
EXMOLLIENT® 7100 is a Microbead-Free Waters Act of 2015 compliant, multi-functional delivery system capable of “self-regulated” exfoliation while delivering the ingredients entrapped in their core. EXMOLLIENT® scrub particles slowly break down into smalle...view more
EXMOLLIENT® 7100 is a Microbead-Free Waters Act of 2015 compliant, multi-functional delivery system capable of “self-regulated” exfoliation while delivering the ingredients entrapped in their core. EXMOLLIENT® scrub particles slowly break down into smaller, softer particles minimizing the potential for over-scrubbing and the associated irritation. As the particles break down, this product delivers the ingredient entrapped in its core. Through the delivery of dimethicone, EXMOLLIENT® 7100 helps provide exceptional after-feel and the unique ability for skin protectant claims from an exfoliant. view less
Compliance Highlights Unavailable
|
|
| FANCOL® CB | Elementis |
|
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ab...view more
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ability to maintain a molded shape, while also mixed with other products. This combined with it melting at body temperature, allowing it to release actives, makes it a good product for suppositories. FANCOL® CB has an excellent stability profile. view less
Compliance Highlights Available
|
|
| FANCOL® HS3 US | Elementis |
|
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosm...view more
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosmetic industry. It has emollient, moisturizing and conditioning effects. It readily dissolves in water to produce a clear solution. It is valuable in shampoos and conditioners to impart softness and shine. view less
Compliance Highlights Unavailable
|
|
| FANCOL® LA SUPERFINE-P | Elementis |
|
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work...view more
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work with. FANCOL® LA SUPERFINE-P acts as an emulsifying agent for both o/w and w/o emulsions and can be used over a wide pH range. FANCOL® LA SUPERFINE-P has a high surface activity so can reduce interfacial tension of mineral oil/water. It can also significantly increase the water absorbing capacity of hydrocarbon systems. view less
Compliance Highlights Available
|
|
| FANCOL® LA-15 | Elementis |
|
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsify...view more
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsifying properties of Lanolin Alcohol are now available to create stable O/W emulsions or even microemulsions with fine emollient and spreading properties. It can couple Lanolin Oil into shampoo systems to provide emollience and conditioning to the hair after shampooing. As FANCOL® LA-15 is a nonionic material, it will show excellent stability coupled with powerful emulsifying properties under high acidic and highly alkaline conditions. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 250-CG | Elementis |
|
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofin...view more
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 250-CG can be used as a substitute for Mineral Oil. FANCO®L POLYISO® 250-CG provides lubricity. FANCOL POLYISO 250-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 275-CG | Elementis |
|
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing...view more
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 275-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 275-CG provides lubricity. FANCOL® POLYISO® 275-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 300-CG | Elementis |
|
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing...view more
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 300-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 300-CG provides lubricity. FANCOL® POLYISO® 300-CGcan be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 450-CG | Elementis |
|
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofin...view more
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 450-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 450-CG provides lubricity. FANCOL® POLYISO® 450-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 800-CG | Elementis |
|
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofin...view more
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 800-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 800-CG provides lubricity. FANCOL® POLYISO® 800-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® SHEA BUTTER | Elementis |
|
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA B...view more
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA BUTTER shows its ability to protect the skin from sun and helps to ease superficial skin irritation. Its oily qualities improve skin softness. FANCOL® SHEA BUTTER is an excellent skin conditioning agent, which melts at body temperature, giving it good spreadibility. FANCOL® SHEA BUTTER enhances shine and has excellent superfatting qualities. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOL® VB | Elementis |
|
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pig...view more
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pigment wetting properties. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCOR® ABYSSINIAN OIL | Elementis |
|
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percen...view more
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percentage of unsaturated C22 fatty acids. Furthermore, it is liquid at room temperature, even though it is of high molecular weight. FANCOR® ABYSSINIAN OIL is stable against heat breakdown and is highly resistant to oxidation.
FANCOR® ABYSSINIAN OIL has a high surface tension and gives good spreadability. It provides natural luster, lubricity and an emollient feeling to hair care products. FANCOR® ABYSSINIAN OIL provides excellent pigment wetting and is a very efficient pigment dispersant, which leaves behind an elegant cushioning skin feel. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOR® LANWAX | Elementis |
|
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty ...view more
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty esters of Cholesterol and other sterols. FANCOR® LANWAX is used in water in oil systems to provide firmness, emolliency, improved consistency and stability. As such, it finds wide use not only in creams and lotions, but also is most valuable in lip formulations. It will add acceptable tact to hair grooming preparations and will serve as a plasticizer in wax crayons. It is an excellent bodying agent.
FANCOR® LANWAX is valuable as a low cost replacer or extender for other natural waxes in all applications including the manufacturing of candles. Not only will it act as an emulsifier, but it also serves as a crystallization inhibitor for other waxes. In polishes it will help reduce slip without interfering with gloss. view less
Compliance Highlights Available
|
|
| FANCOR® MEADOWFOAM SEED OIL | Elementis |
|
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique...view more
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique molecular structure not found in any other naturally occurring substance. FANCOR® MEADOWFOAM SEED OIL contains approximately 95% fatty acids having chain lengths of 20-22 Carbon atoms. The typical fatty acid profile is as follows: C20:1(61%), C22:1(16%) and C22:2(18%). Most importantly, the unsaturated double bonds are located at the Δ5 and Δ13 position. Combination of lack of conjugated double bonds and carrying its natural antioxidant brings this oil extraordinary oxidative stability. Furthermore, it is liquid at room temperature regardless its high molecular weight. It is effective against heat breakdown and is resistant to oxidation. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-1 | Elementis |
|
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and t...view more
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule. FANCORSIL® LIM-1 is soluble in water. FANCORSIL® LIM-1 has excellent conditioning and moisturizing properties in both skin and haircare applications. FANCORSIL® LIM-1 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-1 can be used as a shine enhancer in decorative cosmetics and hair care products while also helping to build body to the formulation. FANCORSIL® LIM-1 does not depress foam, but adds density and more creaminess to the foam. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-2 | Elementis |
|
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and ...view more
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule.
FANCORSIL® LIM-2 is not soluble in water and is easily emulsified with hair and skin care systems to contribute lubricity without greasiness. FANCORSIL® LIM-2 has excellent conditioning and moisturizing properties in both skin and hair care leave-on applications. FANCORSIL® LIM-2 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-2 can be used as a shine enhancer in hair care products while also helping to build body to the formulation. view less
Compliance Highlights Unavailable
|
|
| Hectabrite® C | AMCOL Health & Beauty Solutions, Inc. |
|
Hectabrite® C is a highly purified white sodium hectorite. It is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It also exhibits a high degree of shear thinnin...view more
Hectabrite® C is a highly purified white sodium hectorite. It is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It also exhibits a high degree of shear thinning. Hectabrite® C is excellent for use in all personal care formulations. view less
Compliance Highlights Available
|
|
| LAN-AQUA-SOL™ 75:50 | Elementis |
|
LAN-AQUA-SOL™ 75:50 is the Polyethylene Glycol derivative of Lanolin. LAN-AQUA-SOL™ 75:50 is a non-ionic polyoxyalkaline Lanolin ether-ester derived by attaching hydrophilic groups to Anhydrous Lanolin, thereby imparting water solubility. LAN-AQUA-SOL™ 75...view more
LAN-AQUA-SOL™ 75:50 is the Polyethylene Glycol derivative of Lanolin. LAN-AQUA-SOL™ 75:50 is a non-ionic polyoxyalkaline Lanolin ether-ester derived by attaching hydrophilic groups to Anhydrous Lanolin, thereby imparting water solubility. LAN-AQUA-SOL™ 75:50 is in a 50% active form. It is a water soluble Lanolin and acts as a non-ionic surfactant. view less
Compliance Highlights Unavailable
|
|
| Luxomatte® N MT125 | AMCOL Health & Beauty Solutions, Inc. |
|
Luxomatte® N MT125 is a free-flowing white amorphous polymeric powder that absorbs high levels of lipophilic materials while providing an elegant skin feel. It is capable of providing a variety functional benefits to topical formulations used in personal ...view more
Luxomatte® N MT125 is a free-flowing white amorphous polymeric powder that absorbs high levels of lipophilic materials while providing an elegant skin feel. It is capable of providing a variety functional benefits to topical formulations used in personal care applications. This product consists of high surface area cellulose microparticles that have a strong affinity for sebum and other oils. The Luxomatte® N MT125 particles, when delivered to the skin can provide sebum control and mattifying effects in cosmetic formulations. view less
Compliance Highlights Unavailable
|
|
| MAGNABRITE® F | AMCOL Health & Beauty Solutions, Inc. |
|
MAGNABRITE® F Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as a free-flowing powder. It is ideal for use as emulsion stabilizers, suspending agents and viscosity modifiers. MAGNABRITE® F is typically us...view more
MAGNABRITE® F Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as a free-flowing powder. It is ideal for use as emulsion stabilizers, suspending agents and viscosity modifiers. MAGNABRITE® F is typically used in tablets, pressed powders, ointments and pastes. view less
Compliance Highlights Unavailable
|
|
| MAGNABRITE® HV | AMCOL Health & Beauty Solutions, Inc. |
|
MAGNABRITE® HV Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use as a stabilizing, emulsifying and suspending agent. MAGNABRITE® HV can be used in a wi...view more
MAGNABRITE® HV Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use as a stabilizing, emulsifying and suspending agent. MAGNABRITE® HV can be used in a wide range of cosmetic applications, including acne treatments, antiperspirants, deodorants, creams and lotions. view less
Compliance Highlights Unavailable
|
|
| MAGNABRITE® K | AMCOL Health & Beauty Solutions, Inc. |
|
MAGNABRITE® K Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use as a stabilizing and suspending agent. MAGNABRITE® K can be used in creams and lotions....view more
MAGNABRITE® K Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use as a stabilizing and suspending agent. MAGNABRITE® K can be used in creams and lotions. It is also widely used in oral pharmaceutical suspensions. view less
Compliance Highlights Unavailable
|
|
| MAGNABRITE® S | AMCOL Health & Beauty Solutions, Inc. |
|
MAGNABRITE® S Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use a stabilizing and suspending agent for cosmetic, toiletry and pharmaceutical formulatio...view more
MAGNABRITE® S Magnesium Aluminum Silicate is a highly purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. It is ideal for use a stabilizing and suspending agent for cosmetic, toiletry and pharmaceutical formulations. Especially useful for acidic preparations. MAGNABRITE® S has low acid demand and high acid compatibility. MAGNABRITE® S is ideal for use in a wide range of cosmetic applications including acne treatments, anti-dandruff and treatment shampoos, burn/bite creams, eye cosmetics, and sunscreens. view less
Compliance Highlights Unavailable
|
|
| MAGNABRITE® ULTRA | AMCOL Health & Beauty Solutions, Inc. |
|
MAGNABRITE® ULTRA is a high purity, water-washed, acidic, magnesium aluminum silicate product, selectively mined, and provided in a flaked form for ease in formulation. It is ideal for use as a suspending agent, viscosifier, binder and emulsion stabilizer...view more
MAGNABRITE® ULTRA is a high purity, water-washed, acidic, magnesium aluminum silicate product, selectively mined, and provided in a flaked form for ease in formulation. It is ideal for use as a suspending agent, viscosifier, binder and emulsion stabilizer for cosmetics and personal care products. view less
Compliance Highlights Unavailable
|
|
| MEADOWESTOLIDE® | Elementis |
|
MEADOWESTOLIDE® is a unique, functionally significant derivative of Meadowfoam Seed Oil. The development of this estolide represents a new level of advanced ingredient technology. The estolide is a dimeric molecule, which is structurally sophisticated and...view more
MEADOWESTOLIDE® is a unique, functionally significant derivative of Meadowfoam Seed Oil. The development of this estolide represents a new level of advanced ingredient technology. The estolide is a dimeric molecule, which is structurally sophisticated and functionally active. MEADOWESTOLIDE® provides measureable and meaningful consumer benefits. In hair, the estolide improves intra-fiber moisture retention and thereby imparts protection from thermal damage, while restoring the elasticity and reducing the coefficient of friction of the hair cuticle surface to prevent mechanical damage.
In skincare systems, MEADOWESTOLIDE® helps to adjust the hydration levels of the interstitial spaces and provides significant moisturization benefits. These benefits are often perceived as softer, more pliant tissue. Initial investigations suggest that the estolide will prove to be a very important agent in protecting skin from the damaging effects of a variety of common causes. MEADOWESTOLIDE® has been incorporated into decorative cosmetics where significant attributes were observed including improved elegance in product texture and, in the case of pigment delivery, considerably better color pay-off. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| MEADOWLACTONE® | Elementis |
|
MEADOWLACTONE® contains a cyclical lactone ring derived from a 5-hydroxy moiety on the Meadowfoam fatty acid, in a Meadowfoam fatty acid matrix. The lactone ring confers a hydrophilic nature to that terminal end of the molecule while the long fatty acid c...view more
MEADOWLACTONE® contains a cyclical lactone ring derived from a 5-hydroxy moiety on the Meadowfoam fatty acid, in a Meadowfoam fatty acid matrix. The lactone ring confers a hydrophilic nature to that terminal end of the molecule while the long fatty acid chain confers lipophilic attributes to the rest of the molecule. MEADOWLACTONE® has amphoteric properties, since the lactone ring will open and close as a function of pH and the ionic character of the environment. MEADOWLACTONE® can help provide balanced moisturization, to improve tone, elasticity and help reduce dryness of the skin. MEADOWLACTONE® can help reduce irritancy caused by some products. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| MEADOWQUAT® HG-70 | Elementis |
|
MEADOWQUAT® HG-70 is produced by reacting Meadowfoam Seed Oil to form this sulfated (nonchloride) quaternium compound for enhancing the conditioning effects of Meadowfoam fatty acids in hair conditioners and skin care products. MEADOWQUAT® HG-70 is 70% ac...view more
MEADOWQUAT® HG-70 is produced by reacting Meadowfoam Seed Oil to form this sulfated (nonchloride) quaternium compound for enhancing the conditioning effects of Meadowfoam fatty acids in hair conditioners and skin care products. MEADOWQUAT® HG-70 is 70% active. MEADOWQUAT® HG-70 can be used in cationic hair conditioning formulations. It provides excellent skin conditioning. MEADOWQUAT® HG-70 is particularly useful in hair coloring products for color treated hair, enhancing condition and color durability. view less
Compliance Highlights Unavailable
|
|
| MICRO-DRY 323 | Elementis |
|
MICRO-DRY 323 is the most popular aerosol grade of standard Aluminum Chlorohydrate. MICRO-DRY 323 is an impalpable aluminum chlorohydrate with 97% minimum < 45 microns. It is ideal for use in anhydrous suspension aerosols.
Compliance Highlights Unavailable
|
|
| MICRO-DRY 331 | Elementis |
|
MICRO-DRY 331 has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. MICRO-DRY 331 is primarily used in anhydrous suspension sticks, and can be used in suspension roll-...view more
MICRO-DRY 331 has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. MICRO-DRY 331 is primarily used in anhydrous suspension sticks, and can be used in suspension roll-ons and soft solids. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® 520RA Retinaldehyde | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® 520RA Retinaldehyde is a multi-functional delivery system designed to provide sustained-release retinaldehyde in cosmetic formulations. MICROSPONGE® 520RA Retinaldehyde is a yellow, free flowing powder that can be readily dispersed in gels, e...view more
MICROSPONGE® 520RA Retinaldehyde is a multi-functional delivery system designed to provide sustained-release retinaldehyde in cosmetic formulations. MICROSPONGE® 520RA Retinaldehyde is a yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® C111A Glycolic Acid Delivery System | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® C111A is a mixture of 20% methacrylate copolymer and 80% glycolic acid solution. It exfoliates the skin, removing the outer layer; lightens discoloration of the skin, sch as sun and age spots; and aids with acne-prone and blackhead-prone ski...view more
MICROSPONGE® C111A is a mixture of 20% methacrylate copolymer and 80% glycolic acid solution. It exfoliates the skin, removing the outer layer; lightens discoloration of the skin, sch as sun and age spots; and aids with acne-prone and blackhead-prone skin. This product is recommended for facial treatments and skin care products such as cleansers, serums, moisturizers, eye creams, and face peels. It can also be used for exfoliating gels and treatments. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® C116A Retinol | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® C116A Retinol Delivery System is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. MICROSPONGE® C116A Retinol is a light yellow, free flowing powder that can be...view more
MICROSPONGE® C116A Retinol Delivery System is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. MICROSPONGE® C116A Retinol is a light yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders minimizing the discoloration problems common with many retinol products. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® N 709 RE | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 709 RE (MSN 709RE) is a retinol delivery system based on the novel MICROSPONGE® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation co...view more
MICROSPONGE® N 709 RE (MSN 709RE) is a retinol delivery system based on the novel MICROSPONGE® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation compared to conventional formulations. MSN 709RE is an off-white to pale yellow free flowing powder that can be readily dispersed in gels, emulsions and powders, minimizing the discoloration problems associated with many retinol products. MSN 709RE also is a source of BHA-free retinol and is not subject to listing under California Proposition 65. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® N 720BK | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 720BK is multifunctional microparticle delivery system designed to provide sustained release of Bakuchiol in topical formulations.
Compliance Highlights Available
|
|
| MICROSPONGE® N 720RE | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 720RE is a retinol delivery system based on the novel MICROSPONGE® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation compared to con...view more
MICROSPONGE® N 720RE is a retinol delivery system based on the novel MICROSPONGE® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation compared to conventional formulations. MSN 720RE is an off-white to pale yellow free flowing powder that can be readily dispersed in gels, emulsions and powders, minimizing the discoloration problems associated with many retinol products. MSN 720RE also is a source of BHA-free retinol and is not subject to Listing under California Proposition 65. view less
Compliance Highlights Unavailable
|
|
| Microsponge® N 720TRA | AMCOL Health & Beauty Solutions, Inc. |
|
Microsponge® N 720TRA (MSN 720TRA) is a retinaldehyde delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinaldehyde to your anti-aging formulations. MSN 720TRA is a yellow free-flowin...view more
Microsponge® N 720TRA (MSN 720TRA) is a retinaldehyde delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinaldehyde to your anti-aging formulations. MSN 720TRA is a yellow free-flowing powder that can be readily dispersed in gels, emulsions and powders, minimizing the handling problems associated with many retinoid products. MSN 720TRA also is a source of BHA- and BHT-free retinaldehyde and is not subject to listing under California Proposition 65. view less
Compliance Highlights Unavailable
|
|
| Microsponge® N 720TRE | AMCOL Health & Beauty Solutions, Inc. |
|
Microsponge® N 720TRE (MSN 720TRE) is a retinol delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation c...view more
Microsponge® N 720TRE (MSN 720TRE) is a retinol delivery system based on the novel Microsponge® N natural microparticle. The MSN technology provides sustained released retinol to your anti-aging formulations and provides efficacy with reduced irritation compared to conventional formulations. MSN 720TRE is a yellow, free flowing powder that can be readily dispersed in gels, emulsions and powders, minimizing the discoloration problems associated with many retinol products. MSN 720TRE also is a source of BHA-free retinol and is not subject to Listing under California Proposition 65. view less
Compliance Highlights Available
|
|
| MICROSPONGE® N 725GA | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 725GA consists of the MICROSPONGE® N Natural Microparticle loaded with 25% by weight of Glycolic Acid. It provides sustained release of cosmetic, OTC and Rx actives in formulations. This technology yields effective products that have reduce...view more
MICROSPONGE® N 725GA consists of the MICROSPONGE® N Natural Microparticle loaded with 25% by weight of Glycolic Acid. It provides sustained release of cosmetic, OTC and Rx actives in formulations. This technology yields effective products that have reduced levels of irritation. MICROSPONGE® N 725GA helps to exfoliate the skin, remove the outer layer of dead skin and to bring fresh new skin to the surface. view less
Compliance Highlights Unavailable
|
|
| MICROSPONGE® N 733SA | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® N 733SA is a natural microparticle delivery system loaded with 33% Salicylic Acid that is useful in a wide variety of cosmetic and OTC personal care formulations. The product is supplied as a free-flowing off-white powder that contains no pre...view more
MICROSPONGE® N 733SA is a natural microparticle delivery system loaded with 33% Salicylic Acid that is useful in a wide variety of cosmetic and OTC personal care formulations. The product is supplied as a free-flowing off-white powder that contains no preservatives or alcohol. view less
Compliance Highlights Available
|
|
| MICROSPONGE® P078A | AMCOL Health & Beauty Solutions, Inc. |
|
MICROSPONGE® P078A Salicylic Acid is an elegant way to deliver salicylic acid into anti-acne products that allows the formulation of products without harsh-to-the-skin solvents like ethanol, while providing sustained release of salicylic acid and the abil...view more
MICROSPONGE® P078A Salicylic Acid is an elegant way to deliver salicylic acid into anti-acne products that allows the formulation of products without harsh-to-the-skin solvents like ethanol, while providing sustained release of salicylic acid and the ability to simultaneously provide control of sebum on the surface of the skin. view less
Compliance Highlights Unavailable
|
|
| Organo-34C | AMCOL Health & Beauty Solutions, Inc. |
|
Organo-34C is an organically modified montmorillonite (bentonite) clay that enhances the rheology of organic systems. It provides the following benefits in low to medium polarity systems: high gelling efficiency, shear thinning rheology and thixotropic vi...view more
Organo-34C is an organically modified montmorillonite (bentonite) clay that enhances the rheology of organic systems. It provides the following benefits in low to medium polarity systems: high gelling efficiency, shear thinning rheology and thixotropic viscosity recovery, efficient sag resistance, good anti-settle and hard sedimentation prevention, and no heat activation requirement. view less
Compliance Highlights Available
|
|
| POLARGEL® CA | AMCOL Health & Beauty Solutions, Inc. |
|
POLARGEL® CA is a selectively mined and specially processed calcium montmorillonite clay supplied as a mircofine powder. It is used in clay masks and other high clay solid formulations. This product is produced under cGMP manufacturing conditions.
Compliance Highlights Available
|
|
| POLARGEL® HV | AMCOL Health & Beauty Solutions, Inc. |
|
POLARGEL® HV is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® HV promotes excellent rheology and fine body to enhance a broad ra...view more
POLARGEL® HV is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® HV promotes excellent rheology and fine body to enhance a broad range of formulations. It is ideal for use in a wide range of cosmetic applications, including acne treatments, antiperspirants, deodorants, creams, and lotions. view less
Compliance Highlights Available
|
|
| POLARGEL® NF | AMCOL Health & Beauty Solutions, Inc. |
|
POLARGEL® NF is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® NF can be used in a wide range of cosmetic applications, including...view more
POLARGEL® NF is a selectively mined sodium bentonite clay supplied as a white microfine powder. It can be used as a suspending agent, viscosifier, binder and emulsion stabilizer. POLARGEL® NF can be used in a wide range of cosmetic applications, including acne treatments, Anti-dandruff and treatment shampoos, eye cosmetics, liquid make up, creams, and lotions. view less
Compliance Highlights Unavailable
|
|
| Poly-Pore® 120 RE | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 120 RE is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. PP120RE Retinol Delivery System is an off-white to pale yellow, free flowing powder that can be readily ...view more
Poly-Pore® 120 RE is a multi-functional delivery system designed to provide sustained release, improve stability and reduce the irritation of retinol. PP120RE Retinol Delivery System is an off-white to pale yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders, minimizing the discoloration problems common with many retinol products. Polypore is ideal for use in a wide range of cosmetic applications including anti-aging and skin rejuvenation products, make-ups and foundations with skin-care benefits, facial and body masks, and hand and body lotions. view less
Compliance Highlights Unavailable
|
|
| Poly-Pore® 120TRE Retinol Delivery System | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 120TRE (PP120TRE) is a multi-functional retinol delivery system designed to improve the stability and reduce the irritation of retinol. PP120TRE is BHA-Free and thereby avoids the requirement for a California Proposition 65 warning label on ret...view more
Poly-Pore® 120TRE (PP120TRE) is a multi-functional retinol delivery system designed to improve the stability and reduce the irritation of retinol. PP120TRE is BHA-Free and thereby avoids the requirement for a California Proposition 65 warning label on retinol finished products that contain BHA. PP120TRE also is BHT-Free and uses the antioxidant power of Vitamin E (Tocopherol) to promote the stability of retinol. PP120TRE is an off-white to pale yellow, free flowing powder that can be readily dispersed in gels, emulsions, and powders, minimizing the discoloration problems common with many retinol products. view less
Compliance Highlights Unavailable
|
|
| Poly-Pore® 404HA | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 404HA Hyaluronic Acid Delivery System is a multifunctional microparticle delivery system designed to provide sustained release of Sodium Hyaluronate (Hyaluronic Acid) in topical formulations. It offers improved skin hydration, as well as ease o...view more
Poly-Pore® 404HA Hyaluronic Acid Delivery System is a multifunctional microparticle delivery system designed to provide sustained release of Sodium Hyaluronate (Hyaluronic Acid) in topical formulations. It offers improved skin hydration, as well as ease of use and compatibility in formulations. view less
Compliance Highlights Available
|
|
| Poly-Pore® 450SA Salicylic Acid Delivery System | AMCOL Health & Beauty Solutions, Inc. |
|
Poly-Pore® 450SA Salicylic Acid Delivery System is a multi-functional delivery system useful in a wide variety of cosmetic and personal care products and formulations. Supplied as a free flowing white powder, Poly-Pore® 450SA contains no preservatives or ...view more
Poly-Pore® 450SA Salicylic Acid Delivery System is a multi-functional delivery system useful in a wide variety of cosmetic and personal care products and formulations. Supplied as a free flowing white powder, Poly-Pore® 450SA contains no preservatives or surfactants. Typical applications include facial treatments and skin care products, make-ups and foundations, daily use moisturizers and lotions, exfoliating gels and treatments, and loose and pressed powders. view less
Compliance Highlights Unavailable
|
|
| POLYTRAP® 6603 Adsorber | AMCOL Health & Beauty Solutions, Inc. |
|
POLYTRAP® 6603 Adsorber is a free-flowing white amorphous polymeric powder that adsorbs high levels of lipophilic materials while providing an elegant skin feel. POLYTRAP® 6603 Adsorber is capable of providing a variety of functional benefits to topical f...view more
POLYTRAP® 6603 Adsorber is a free-flowing white amorphous polymeric powder that adsorbs high levels of lipophilic materials while providing an elegant skin feel. POLYTRAP® 6603 Adsorber is capable of providing a variety of functional benefits to topical formulations used in personal care products. It is ideal for use in skin care, color cosmetics, fragrances, deodorants, body lotions, sunscreens, baby care products, and other personal care sticks and gels. view less
Compliance Highlights Unavailable
|
|
| REACH 103 | Elementis |
|
REACH 103 is a high performance enhanced efficacy active ingredient recommended for use in anhydrous suspension aerosols. REACH 103 provides improved sweat protection compared to conventional ACH. This product is compliant with ISO 16128 requirements.
Compliance Highlights Unavailable
|
|
| REACH 301 | Elementis |
|
REACH 301 is an aerosol grade aluminum sesquichlorohydrate. REACH 301 has a lower molecular weight and Al:Cl molar ratio than standard ACH making it more appropriate for diffusing into the deeper situated sweat glands on the feet. This product is complian...view more
REACH 301 is an aerosol grade aluminum sesquichlorohydrate. REACH 301 has a lower molecular weight and Al:Cl molar ratio than standard ACH making it more appropriate for diffusing into the deeper situated sweat glands on the feet. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| REACH 301L | Elementis |
|
REACH 301L is an acid-activated aqueous solution of aluminum sesquichlorohydrate that provides better sweat reduction than standard ACH due to its lower Al:Cl molar ratio. The Al:Cl molar ratio is controlled at the higher end of its allowed range to maint...view more
REACH 301L is an acid-activated aqueous solution of aluminum sesquichlorohydrate that provides better sweat reduction than standard ACH due to its lower Al:Cl molar ratio. The Al:Cl molar ratio is controlled at the higher end of its allowed range to maintain better skin and fragrance compatibility. REACH 301L is specially designed for use in hydro-alcoholic, aqueous and clear roll-ons as well as aqueous creams and gels. REACH 301L can also used in hydro-alcoholic and aqueous pump sprays. view less
Compliance Highlights Unavailable
|
