| AACH-7172 | Elementis |
|
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and...view more
AACH-7172 is our most effective enhanced efficacy aluminum chlorohydrate powder in spherical particle shape for use in anhydrous suspension aerosols. AACH-7172 provides superior protection against wetness and odor in anhydrous antiperspirant aerosols, and also contributes to reduced visible white residue. Normal application will provide a minimum of 24 hours wetness and odor protection. view less
Compliance Highlights Unavailable
|
|
| AAZG-531 | Elementis |
|
AAZG-531 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, roll-ons and creams.
Compliance Highlights Available
|
|
| AAZG-7167 | Elementis |
|
AAZG-7167 is a high performance, enhanced efficacy active ingredient intended for use in anhydrous suspension sticks, soft solids, roll-ons and creams.
Compliance Highlights Available
|
|
| ACH-321 | Elementis |
|
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shi...view more
ACH-321 is an aluminum chlorohydrate crystal for dissolution in water and is a spray dried form of Chlorhydrol 50. ACH-321 provides a level of performance that meets the minimum FDA criterion for sweat reduction. ACH-321 is fully concentrated for less shipping weight. view less
Compliance Highlights Unavailable
|
|
| AZG-364 | Elementis |
|
AZG-364 is specially prepared for dissolving in aqueous formulations, and results in a stable viscosity profile.
Compliance Highlights Available
|
|
| AZG-368 | Elementis |
|
AZG-368 is an aqueous solution of standard aluminum zirconium tetrachlorohydrex glycine that out- performs Al-only actives. AZG-368 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as aqueous creams and clear gels.
Compliance Highlights Available
|
|
| AZG-370 | Elementis |
|
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in ...view more
AZG-370 is a superfine powder of aluminum zirconium tetrachlorohydrex glycine, that has a very low particle size which provides homogeneity of the active in anhydrous suspension systems along with a smooth, non-gritty payoff. AZG-370 is primarily used in anhydrous suspension sticks, roll-ons and soft solids. view less
Compliance Highlights Available
|
|
| AZG-442 | Elementis |
|
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqu...view more
AZG-442 is a solution of standard aluminum zirconium tetrachlorohydrex glycine, and its high solids concentration allows the use of less formula water. AZG-442 is ideally suited for use in emulsion, aqueous and clear roll-ons as well as clear gels and aqueous creams. view less
Compliance Highlights Available
|
|
| BENTONE GEL® 1002 V | Elementis |
|
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL...view more
BENTONE GEL® 1002 V is a specially prepared dispersion of an organically modified hectorite in an ultra pure D5 silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® 1002 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® 1002 V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ABO V | Elementis |
|
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil ha...view more
BENTONE GEL® ABO V is a specially prepared dispersion of a non-animal origin organically modified hectorite in natural Abyssinian oil. It is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. Abyssinian oil has a unique molecular sructure with a high percentage of unsaturated C22 fatty acids. It is a non-greasy oil providing an elegant cushioning skin feel and a natural luster, lubricity and softeness to hair, as well as aiding pigment dispersion in decorative cosmetics. BENTONE GEL® ABO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ABO V is an excellent alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® CAO V | Elementis |
|
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® ...view more
BENTONE GEL® CAO V is a specially prepared dispersion of a non-animal organically modified hectorite in cosmetic grade castor oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® CAO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® DM5 V | Elementis |
|
BENTONE GEL® DM5 V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in dimethicone.
Compliance Highlights Unavailable
|
|
| BENTONE GEL® EUG V | Elementis |
|
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also pa...view more
BENTONE GEL® EUG V is a specially prepared dispersion of a non-animal organically modified hectorite in Eutanol® G. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® EUG V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® EUG V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® GTCC V | Elementis |
|
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BE...view more
BENTONE GEL® GTCC V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Caprylic/Capric Triglyceride. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® GTCC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® GTCC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® HS V | Elementis |
|
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control ...view more
BENTONE GEL® HS V is a specially prepared dispersion of an organically modified hectorite in Hemisqualane (C13-15 Alkane). BENTONE GEL® HS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IHD V | Elementis |
|
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is ...view more
BENTONE GEL® IHD V is a specially prepared dispersion of an non-animal organically modified hectorite in Isohexadecane. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IHD V It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IHD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® IPM V | Elementis |
|
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based...view more
BENTONE GEL® IPM V is a specially prepared dispersion of a non-animal organically modified Hectorite Isopropyl Myristate activated with Propylene Carbonate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® IPM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® IPM V is an alternative to traditional polymer or cellulose-based thickeners for stablizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® ISD V | Elementis |
|
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is...view more
BENTONE GEL® ISD V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Isododecane. This grade is designed to impart rheological control and suspension to organic-and silicone-based cosmetics. BENTONE GEL® ISD V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® ISD V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® LC V | Elementis |
|
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological cont...view more
BENTONE GEL® LC V is a specially prepared dispersion of a non-animal origin organically modified hectorite clay in a low carbon chain alkane. It delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the oil phase of cosmetics. It is an easily spreadable, volatile and non-oily emollient, which leaves a soft, non-tacky skin feel. view less
Compliance Highlights Available
|
|
| BENTONE GEL® LIP V | Elementis |
|
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed...view more
BENTONE GEL® LIP V is a specially prepared dispersion of a non-animal origin, organically modified hectorite in non-volatile hydrogenated polyisobutene. BENTONE GEL® LIP V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension properties to emulsion and anhydrous products. BENTONE GEL® LIP V provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances aesthetics by masking greasy and tacky components and imparts a pleasant residual silkiness on the skin. BENTONE GEL® LIP V is especially designed to impart cushion and slip to lip products. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V | Elementis |
|
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is a...view more
BENTONE GEL® MIO V is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® MIO V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® MIO V HV | Elementis |
|
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particula...view more
BENTONE GEL® MIO V HV is a specially prepared dispersion of an organically modified hectorite in cosmetic grade mineral oil. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® MIO V HV is an alternative to traditional polymer or cellulose-based thickeners
for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OLV V | Elementis |
|
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTON...view more
BENTONE GEL® OLV V Is a specially prepared dispersion of a non-animal origin organically modified hectorite in cosmetic grade olive oil. This grade is designed to impart rheological control and suspension in anhydrous and emulsion-based cosmetics. BENTONE GEL® OLV V can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OLV V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® OMS V | Elementis |
|
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V i...view more
BENTONE GEL® OMS V is a specially prepared dispersion of an organically modified hectorite in ISOPAR+H (C11-12 Isoparaffin). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® OMS V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® OMS V is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTIS V | Elementis |
|
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to i...view more
BENTONE GEL® PTIS V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Pentaerythrityl Tetraisostearate. BENTONE GEL® PTIS V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics, while providing cushion emollience, persisting and lubricious skin feel, high pigment wetting, and glossing films. BENTONE GEL® PTIS V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin, enhances UV protection in sunscreens. BENTONE GEL® PTIS V is an alternative to traditional polymers or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® PTM V | Elementis |
|
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheologica...view more
BENTONE GEL® PTM V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Phenyl Trimethicone. BENTONE GEL® PTM V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. It is an easily spreadable, non-oily emollient, which leaves a soft, non-tacky, skin feel and improves the gloss and softness of hair. BENTONE GEL® PTM V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, imparts thixotropic flow, improves application properties, offers unique and rich texture, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® PTM V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® SS71 V | Elementis |
|
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rholog...view more
BENTONE GEL® SS71 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Petroleum Distallate. BENTONE GEL® SS71 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rhological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® SS71 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® SS71 V is an excellent alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® TN V | Elementis |
|
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also par...view more
BENTONE GEL® TN V is a specially prepared dispersion of an organically modified hectorite in C12-15 Alkyl Benzoate. This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® TN V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® TN V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V | Elementis |
|
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-...view more
BENTONE GEL® VS-5 PC V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone- based cosmetics. BENTONE GEL® VS-5 PC V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 PC V HV | Elementis |
|
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also par...view more
BENTONE GEL® VS-5 PC V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 PC V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V | Elementis |
|
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V ...view more
BENTONE GEL® VS-5 V is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. BENTONE GEL® VS-5 V is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V is an alternative to traditional polymer or cellulose -based thickeners for stabilizing emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS-5 V HV | Elementis |
|
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also partic...view more
BENTONE GEL® VS-5 V HV is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. It is also particularly useful in emulsions and can be used in "cold process" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skinfeel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS-5 V HV is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. This product is compliant with RSPO and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE GEL® VS1 V | Elementis |
|
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological contro...view more
BENTONE GEL® VS1 V is a specially prepared dispersion of a non-animal origin organically modified hectorite in Trisiloxane. BENTONE GEL® VS1 V delivers a combination of benefits in a single, easy to use product. It is designed to impart rheological control and suspension to the organic- and silicone-based cosmetics. BENTONE GEL® VS1 V is also particularly useful in emulsions and can be used in “cold process” systems. It provides thermostable viscosity control of the emulsion’s oil phase, imparts thixotropic flow, improves application properties, enhances skin-feel by masking greasy and tacky components and imparts a pleasant residual silkiness to the skin. BENTONE GEL® VS1 V is an alternative to rheological additives containing Cyclopentasiloxane, traditional polymers and Cellulose-based thickeners for stabilizing emulsions. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 1100 | Elementis |
|
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control witho...view more
BENTONE HYDROCLAY™ 1100 is a vegan rheological additive based on purified smectite clay. It imparts thixotropy and good anti-settling properties in the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity.
BENTONE HYDROCLAY™ 1100 is an acid- stable clay and has the ability to absorb oils in skin treatments. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2000 | Elementis |
|
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirem...view more
BENTONE HYDROCLAY™ 2000 is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2001 | Elementis |
|
BENTONE HYDROCLAY™ 2001 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 2100 | Elementis |
|
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension con...view more
BENTONE HYDROCLAY™ 2100 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity to the water phase of cosmetics. It is particularly effective as a means of improving suspension control without unduly increasing viscosity. view less
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 550 | Elementis |
|
BENTONE HYDROCLAY™ 550 additive is a highly beneficiated, easily dispersible powdered smectite clay. It imparts thixotropic viscosity and good suspension control to the water phase of cosmetics.
Compliance Highlights Unavailable
|
|
| BENTONE HYDROCLAY™ 900 | Elementis |
|
BENTONE HYDROCLAY™ 900 is an organically-modified hectorite clay additive designed for the water phase of cosmetics. It's a highly efficient thickener providing significantly higher viscosity than other clay-based additives.
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WN | Elementis |
|
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE ...view more
BENTONE® LUXE WN provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WN creates extremely stable emulsions with the ability to create a variety of textures. Emulsions containing BENTONE® LUXE WN apply easily without leaving a greasy film on the skin. This emulsifying gel can create water in oil systems containing extremely high water content, creating a hydrating sensation. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WO | Elementis |
|
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a...view more
BENTONE® LUXE WO provides emulsification and rheological properties for silicone free water in oil systems. BENTONE® LUXE WO creates extremely stable emulsions with a very light texture. Emulsions containing BENTONE® LUXE WO apply easily without leaving a greasy film on the skin. This light texture allows for high oil concentrations that can be used for dry, damaged skin, yet feels light and silky for even oily skin types. This unique ability to deliver high loads of oil with a dry elegant skin feel make BENTONE® LUXE WO ideal for all skin types. BENTONE® LUXE WO can be used in color cosmetics or sunscreens to disperse and suspend pigments and actives. This product is compliant with RSPO, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE WS | Elementis |
|
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. I...view more
BENTONE® LUXE WS provides emulsification and rheological properties that facilitate the creation of innovative personal care formulas. BENTONE® LUXE WS allows the creation of elegant textures with a thixotropic flow and suspension of active ingredients. It improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. This grade is designed to impart rheological control and suspension to silicone-based cosmetics and emulsion systems. It provides thermostable viscosity control of the emulsion's oil phase. It aids in dispersing pigments and sunscreen actives for even coverage. This product is compliant with RSPO requirements. view less
Compliance Highlights Unavailable
|
|
| BENTONE® LUXE XO | Elementis |
|
BENTONE® LUXE XO provides emulsification and rheological properties for silicone free water in oil systems. It also creates extremely stable emulsions with the ability to create a variety of textures.
Compliance Highlights Available
|
|
| BETAFAN™ M | Elementis |
|
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine sys...view more
BETAFAN™ M is a high molecular weight betaine with significant level of unsaturation. BETAFAN™ M causes less defatting of the skin than other conventional betaines. It is mild and causes less irritation. BETAFAN™ M is very stable.
Surfactant/betaine systems (e.g. alpha olefin sulfonates) tend to irritate because they defat tissue. Therefore, formulators add unsaturated molecules such as oleyl amides and oleyl betaines to mitigate the irritation, but these materials tend to oxidize to aldehydes and do not smell good. As a result, high fragrance levels are required. BETAFAN-M systems reduce this effect. BETAFAN™ M can be used in surfactant and nonsurfactant systems for effective conditioning. view less
Compliance Highlights Unavailable
|
|
| Brillian-AZ136: Azone | Beijing Brilliance Bio |
|
Brillian-AZ136: Azone is a new-style, high effective penetrant. It can accelerate the penetration of hydrophilic medicine and lipophilic medicine through the skin. This product has good stability and hasn`t toxic, side-effect and stimulation.
This pro...view more
Brillian-AZ136: Azone is a new-style, high effective penetrant. It can accelerate the penetration of hydrophilic medicine and lipophilic medicine through the skin. This product has good stability and hasn`t toxic, side-effect and stimulation.
This product can be used in many advanced cosmetics to improve its effect, such as skin care creams, whitening creams, sunscreen creams, pilatorys, and hairdyes. view less
Compliance Highlights Available
|
|
| Brillian-BL200: 4-Methylbenzylidene Camphor | Beijing Brilliance Bio |
|
Brillian-BL200 is based on 4-Methylbenzylidene Camphor. It is a safe and effective fat-soluble UVB filtering agent. This product can significantly improve the SPF Index and is widely used in sunscreens products.
Compliance Highlights Available
|
|
| Brillian-BSJ15: N-(2-Hydroxyethyl)-Urea | Beijing Brilliance Bio |
Brillian-BSJ15 is a compound of N-(2-Hydroxyethyl)-Urea. It is white or similar to white crystal or crystalline powder, odorless and non simulative. It can be easily dissolved in water, but can not dissolve in oils. It has better hydroscopic ability compa...view more
Brillian-BSJ15 is a compound of N-(2-Hydroxyethyl)-Urea. It is white or similar to white crystal or crystalline powder, odorless and non simulative. It can be easily dissolved in water, but can not dissolve in oils. It has better hydroscopic ability compared with glycerin or other hydroscopic agents. This product can increase the elasticity of skin and imparts a good skin feel.
It can be directly added into water and the operation is simple and convenient. If the system of cream is acidity, it can be dissolved in water, then add this solution into the cream at 60°C and the cream will be much more stable. view less
Compliance Highlights Available
|
||
| Brillian-CSA: Capryloyl Salicylic Acid | Beijing Brilliance Bio |
|
Brillian-CSA is a type of Capryloyl Salicylic Acid. This product is white or kind of white crystal powder, odorless, bitter. It can dissolve in lipids and can`t dissolve in water. This product has a good effect on fibrins of skin.
It can remove dead c...view more
Brillian-CSA is a type of Capryloyl Salicylic Acid. This product is white or kind of white crystal powder, odorless, bitter. It can dissolve in lipids and can`t dissolve in water. This product has a good effect on fibrins of skin.
It can remove dead cells, it smooths the face surface and helps to keep up the skins elasticity. This product is recommended for anti-aging, whitening, anti-acne, and anti-wrinkle cosmetics. view less
Compliance Highlights Available
|
|
| Brillian-FS1789: Butyl Methoxydibenzoylmethane | Beijing Brilliance Bio |
|
Brillian-FS1789: Butyl Methoxydibenzoylmethane is an effective lipid-soluble UVA filter agent.This product is grey or yellowish crystalline powder. It can dissolve in oil and can`t dissolve in water. It is well known that UVA directly cause the melanoma c...view more
Brillian-FS1789: Butyl Methoxydibenzoylmethane is an effective lipid-soluble UVA filter agent.This product is grey or yellowish crystalline powder. It can dissolve in oil and can`t dissolve in water. It is well known that UVA directly cause the melanoma cancer occur. The UVA also can enhance erythema which is caused by UVB.
Because the radiant intensity of UVA is much more stable than UVB it is very important to prevent the radiancy of UVA. Brillian-FS1789 can effectively protect and restore the skin. This product can be used in sunscreen cosmetics, and is recommended to be used in combination with a UVB sunscreen. view less
Compliance Highlights Available
|
|
| Brillian-FS21 | Beijing Brilliance Bio |
|
Brillian-FS21 is a safe and efficient UV filter. It can be widely used in sunscreen products. This product greatly improves the stability of the sunscreen and reflects the synergism of three kinds of sunscreen agents.
Compliance Highlights Unavailable
|
|
| Brillian-JVB3 (Nicotinamide J) | Beijing Brilliance Bio |
|
Brillian-JVB3 (Nicotinamide J) is a white or almost white crystal powder composed of nicotinamide. In cosmetics, it will greatly reduce stimulation to skin, and is useful in skin whitening products. It helps to prevent the transfer of melanin to superfici...view more
Brillian-JVB3 (Nicotinamide J) is a white or almost white crystal powder composed of nicotinamide. In cosmetics, it will greatly reduce stimulation to skin, and is useful in skin whitening products. It helps to prevent the transfer of melanin to superficial cells, accelerates the metabolism, and promotes proteins synthesis at the epidermal layer, which improves skin texture. This product easily dissolves in water and alcohols, and is used in skin care, sun care, and skin whitening/lightening products. view less
Compliance Highlights Unavailable
|
|
| Brillian-KS19 | Beijing Brilliance Bio |
Brillian-KS19 is used to effectively repair connective tissue, remove wrinkles, and reduce skin roughness and irritation. This product is beneficial to the skin absorption and is miscible with water in any ratio.
Compliance Highlights Available
|
||
| Brillian-KS25: Tocopheryl Phosphate/Tween-80 | Beijing Brilliance Bio |
|
Brillian-KS25 is derived from Tocopheryl Phosphate/Tween-80. It is used to reduce inflammation, dispel acne, and prevent sunburns. This product mainly used in sunscreen and anti-acne cosmetics. It also can be used together with Brillian-MB22 or other anti...view more
Brillian-KS25 is derived from Tocopheryl Phosphate/Tween-80. It is used to reduce inflammation, dispel acne, and prevent sunburns. This product mainly used in sunscreen and anti-acne cosmetics. It also can be used together with Brillian-MB22 or other anti-acne agents and whitening agents. view less
Compliance Highlights Available
|
|
| Brillian-KS26: Capryloyl Glycin | Beijing Brilliance Bio |
Brillian-KS26 is based on Capryloyl Glycin. It can effectively restrain many bacteriums, such as Ureate staphylococcus and Acne propanoic acid bacillus. It can also control sebum secretion, restrain acne, and reduce wrinkling. This product is recommended ...view more
Brillian-KS26 is based on Capryloyl Glycin. It can effectively restrain many bacteriums, such as Ureate staphylococcus and Acne propanoic acid bacillus. It can also control sebum secretion, restrain acne, and reduce wrinkling. This product is recommended for anti-acne, anti-aging, and other high-grade cosmetics. view less
Compliance Highlights Available
|
||
| Brillian-KS27: Fish Collagen | Beijing Brilliance Bio |
|
Brillian-KS27 is derived from Fish Collagen. It imparts good hydrophilic properties, is an anti-wrinkling agent, and increases skin elasticity. This product promotes skin metabolism, making it smooth and glossy.
Compliance Highlights Available
|
|
| Brillian-KS32: Tocopheryl Nicotinate | Beijing Brilliance Bio |
|
Brillian-KS32 is derived from Tocopheryl Nicotinate. It can directly act on blood vessel wall and restrain the cholesterin formation. It also can enhance blood circulation and slow down the skin aging process. This product can be added into most cosmetic...view more
Brillian-KS32 is derived from Tocopheryl Nicotinate. It can directly act on blood vessel wall and restrain the cholesterin formation. It also can enhance blood circulation and slow down the skin aging process. This product can be added into most cosmetics, including shaving products and shampoos. view less
Compliance Highlights Available
|
|
| Brillian-KS38: Retinol Acetate | Beijing Brilliance Bio |
|
Brillian-KS38 is derived from Retinol Acetate. It is a kind of liposoluble vitamins which can adjust the growth and health of the epidermic histiocyte. It can also promote cell metabolism and dispel wrinkles. This product can be used in a wide range of co...view more
Brillian-KS38 is derived from Retinol Acetate. It is a kind of liposoluble vitamins which can adjust the growth and health of the epidermic histiocyte. It can also promote cell metabolism and dispel wrinkles. This product can be used in a wide range of cosmetic applications. view less
Compliance Highlights Available
|
|
| Brillian-KS68 | Beijing Brilliance Bio |
|
Brillian-KS68 is not only a good anti-ageing ingredient but is also stable, safe and non-irritating. It promotes the synthesis of collagen and elastic fibers. It makes skin tender and bright and is safe to use. This product is recommended for in-oil-in wa...view more
Brillian-KS68 is not only a good anti-ageing ingredient but is also stable, safe and non-irritating. It promotes the synthesis of collagen and elastic fibers. It makes skin tender and bright and is safe to use. This product is recommended for in-oil-in water, cream, and water-based products. view less
Compliance Highlights Unavailable
|
|
| Brillian-KY11: Bisabolol | Beijing Brilliance Bio |
|
Brillian-KY11 is derived from Bisabolol, which has a good anti-inflammatory effect. It also has good stability as well as good skin compatibility. This product is suitable for use in a wide range of cosmetic applications.
Compliance Highlights Available
|
|
| Brillian-KY111 | Beijing Brilliance Bio |
Brillian-KY111 is based on water-soluble bisabolol. It has good stability, skin compatibility, and anti-inflammatory and anti-bacterial properties. This product is mainly used in skin protection and skin care cosmetics, especially water-base sunscreens, w...view more
Brillian-KY111 is based on water-soluble bisabolol. It has good stability, skin compatibility, and anti-inflammatory and anti-bacterial properties. This product is mainly used in skin protection and skin care cosmetics, especially water-base sunscreens, whitening products, and other cosmetics. view less
Compliance Highlights Unavailable
|
||
| Brillian-KY13: Dipotassium Glycyrrhizinate | Beijing Brilliance Bio |
|
Brillian-KY13 is derived from Dipotassium Glycyrrhizinate. It can effectively prevent inflammation to happen when skin was stimulated. It also can diminish inflammation caused by sun. This product is mainly used in skin-care and skin-nurse cosmetics.
Compliance Highlights Available
|
|
| Brillian-MB208: Arbutin | Beijing Brilliance Bio |
|
Brillian-MB208 is based on Arbutin. In cosmetics, it is used as a skin lightening agent. It effectively inhibits the formation of melanin and hyperpigmentation which are caused by ultraviolet radiation. It can also be used for preventing the production of...view more
Brillian-MB208 is based on Arbutin. In cosmetics, it is used as a skin lightening agent. It effectively inhibits the formation of melanin and hyperpigmentation which are caused by ultraviolet radiation. It can also be used for preventing the production of liver spots and freckles, treating sunburns, and regulating melanogenesis. view less
Compliance Highlights Available
|
|
| Brillian-MB218: Kojic Acid | Beijing Brilliance Bio |
|
Brillian-MB218 is derived from Kojic Acid. It prohibits activity of tyrosinase, and obstructs melanin formation. It also makes skin white and light by controling cell vigor, depresses the acitivity of tyrosinase and prohibites dopa oxidation.This product ...view more
Brillian-MB218 is derived from Kojic Acid. It prohibits activity of tyrosinase, and obstructs melanin formation. It also makes skin white and light by controling cell vigor, depresses the acitivity of tyrosinase and prohibites dopa oxidation.This product is a highly efficient lightening agent that is suitable for advanced cosmetics. view less
Compliance Highlights Available
|
|
| Brillian-MB22 | Beijing Brilliance Bio |
Brillian-MB22 is based on Azelaic acid, a traditional whitening and anti-acne ingredient. It has a strong whitening effect and is good at regulating oil secretion. Preparations with this product improve skin moisture and elasticity.
Compliance Highlights Unavailable
|
||
| Brillian-MB268: Ethyl Ascorbic Acid | Beijing Brilliance Bio |
|
Brillian-MB268 is derived from Ethyl Ascorbic Acid. It can effectively inhibit melanin formation, help prevent dermatitis, and improve skin color and elasticity. This product can be used in whitening or anti-aging cosmetics such as gels, essences, latexes...view more
Brillian-MB268 is derived from Ethyl Ascorbic Acid. It can effectively inhibit melanin formation, help prevent dermatitis, and improve skin color and elasticity. This product can be used in whitening or anti-aging cosmetics such as gels, essences, latexes, and creams. view less
Compliance Highlights Available
|
|
| Brillian-MB280: Raspberry Ketone Glucoside | Beijing Brilliance Bio |
Brillian-MB280 is a Raspberry Ketone Glucoside product. It helps reduce the quantity of Nitric Oxide, which harms skin, making is rough and aged. This product also inhibits the melanin formation and the tyrosinase activity, making skin whiter and brighter...view more
Brillian-MB280 is a Raspberry Ketone Glucoside product. It helps reduce the quantity of Nitric Oxide, which harms skin, making is rough and aged. This product also inhibits the melanin formation and the tyrosinase activity, making skin whiter and brighter. It is recommended for skin care, sun care, skin whitening/lightening, and age spot reducing products. view less
Compliance Highlights Available
|
||
| Brillian-MB285: Ultrastructure Hydroquinone Dipropionate / Glycerol | Beijing Brilliance Bio |
Brillian-MB285 is derived from Ultrastructure Hydroquinone Dipropionate / Glycerol. It is an excellent whitening agent. This product is suitable for the preparation of freckle lightening creams, lotions, and other products.
Compliance Highlights Unavailable
|
||
| Brillian-MB288: Aminoethyl Phosphinic Acid | Beijing Brilliance Bio |
|
Brillian-MB288 is derived from Aminoethyl Phosphinic Acid. It can be used in high-grade whitening, anti-freckle, sunburn speckle and chloasma cosmetics. The whitening effect will much better when used together with Arbutin, Vitamin E Acetate and Azone in ...view more
Brillian-MB288 is derived from Aminoethyl Phosphinic Acid. It can be used in high-grade whitening, anti-freckle, sunburn speckle and chloasma cosmetics. The whitening effect will much better when used together with Arbutin, Vitamin E Acetate and Azone in the formula. The addition temperature is 60 centigrade. view less
Compliance Highlights Available
|
|
| Brillian-MB300: Sodium Ascorbyl Phosphate | Beijing Brilliance Bio |
|
Brillian-MB300 is derived from Sodium Ascorbyl Phosphate. Vitamin C is a well-known skin-whitening agent. It can promote the synthesis of ossein and restrain the oxidation of the lipid. However, its colour is easily changed by oxidation, so the use of Vit...view more
Brillian-MB300 is derived from Sodium Ascorbyl Phosphate. Vitamin C is a well-known skin-whitening agent. It can promote the synthesis of ossein and restrain the oxidation of the lipid. However, its colour is easily changed by oxidation, so the use of Vitamin C is limited. view less
Compliance Highlights Available
|
|
| Brillian-PD135: Pyridoxine Dipalmitate | Beijing Brilliance Bio |
|
Brillian-PD135 is derived from Pyridoxine Dipalmitate. It can cure and prevent various skin roughness, acne and sunburn, and is also fit for seborrheic trichomadesis, skin inflammation, general acne and seborrheic eczema. This product is very stable and c...view more
Brillian-PD135 is derived from Pyridoxine Dipalmitate. It can cure and prevent various skin roughness, acne and sunburn, and is also fit for seborrheic trichomadesis, skin inflammation, general acne and seborrheic eczema. This product is very stable and can be added into creams, emulsions, and nutrient shampoos. view less
Compliance Highlights Available
|
|
| Brillian-QD360 | Beijing Brilliance Bio |
Brillian-QD360 is an anti-acne agent with highly effective ingredients. It has high safety, functionality, and stability. This product can be used in dispel acne cream, latex or other dispel acne cosmetics. The addition temperature is 60 centigrade.
Compliance Highlights Unavailable
|
||
| Brillian-VAA: Vitamin A Acid | Beijing Brilliance Bio |
|
Brillian-VAA is based on Vitamin A Acid. It can stimulate skin cell growth and improve the aging skin. It also can dispel tiny wrinkles and reduce skin roughness. This product can be used in anti-acne cosmetics.
Compliance Highlights Available
|
|
| Brillian-VB3: Niacinamide | Beijing Brilliance Bio |
|
Brillian-VB3 is derived from Niacinamide. It is used as an anti-inflammatory, skin-whitening, and energizing agent. This product is suitable for a variety of applications.
Compliance Highlights Available
|
|
| Brillian-VB6: Pyridoxine | Beijing Brilliance Bio |
|
Brillian-VB6 is derived from Pyridoxine. It is very stable and can be used to control rough skin, acne, skin inflammation, sunburns, and itching. This product is recommended for creams, emulsions, and alcohol solutions.
Compliance Highlights Available
|
|
| Brillian-WS124: Water Soluble Vitamin E Nicotinate | Beijing Brilliance Bio |
Brillian-WS124 is meliorated from oil-soluble vitamin E nicotinate. It can relax blood vessels, restrain cholesterol formation, enhance blood circulation and slow down the skin aging process. This product can be widely added into many kids of water-based ...view more
Brillian-WS124 is meliorated from oil-soluble vitamin E nicotinate. It can relax blood vessels, restrain cholesterol formation, enhance blood circulation and slow down the skin aging process. This product can be widely added into many kids of water-based cosmetics. view less
Compliance Highlights Unavailable
|
||
| Brillian-WS126: Tocopheryl Acetate / Ppg-30 / Polyether-70 | Beijing Brilliance Bio |
|
Brillian-WS126 is meliorated from oil-soluble vitamin E acetate. it takes remarkable effect on softening skin, accelerating epidermis cell metabolism, lightening epidemis pigment cell, and decreasing lipid peroxide. It is usually used as a functional addi...view more
Brillian-WS126 is meliorated from oil-soluble vitamin E acetate. it takes remarkable effect on softening skin, accelerating epidermis cell metabolism, lightening epidemis pigment cell, and decreasing lipid peroxide. It is usually used as a functional additive in cosmetics to restrain wrinkle, nurture skin and dispel freckle. This product can be widely used in cosmetics, shaving products, and hair nursing products, especially in water-based transparent products. view less
Compliance Highlights Unavailable
|
|
| Brillian-WS128: Azone/Peg40 Hydrogenated Castor Oil | Beijing Brilliance Bio |
|
BRILLIAN-WS128 is meliorated from oil-soluble Azone. It can accelerate lipophilic medicine, hydrophilic medicine and active ingredients to penetrate through skin. This product can be widely added into various advanced cosmetics, such as skin care, sensiti...view more
BRILLIAN-WS128 is meliorated from oil-soluble Azone. It can accelerate lipophilic medicine, hydrophilic medicine and active ingredients to penetrate through skin. This product can be widely added into various advanced cosmetics, such as skin care, sensitive skin, skin whitening, depilatory, and hair color products. view less
Compliance Highlights Available
|
|
| CHLORHYDROL 50 | Elementis |
|
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and cle...view more
CHLORHYDROL 50 is a 50% aqueous solution of standard aluminum chlorohydrate, specially designed for use in aqueous, emulsion, and clear roll-ons as well as aqueous creams and clear gels. CHLORHYDROL 50 is also suitable for hydro-alcoholic, aqueous and clear pump sprays. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| EA-3105 | Elementis |
|
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly use...view more
EA-3105 is a specially prepared dispersion of an organically modified hectorite in volatile silicone (pentamer). This grade is designed to impart rheological control and suspension to organic- and silicone-based cosmetics. EA-3105 is also particularly useful in emulsions and can be used in ""cold process"" systems. It provides thermostable viscosity control of the emulsion's oil phase, improves application properties, enhances skin-feel by masking greasy or tacky components and imparts a pleasant residual silkiness to the skin. EA-3105 is an alternative to traditional polymer or cellulose-based thickeners for stabilising emulsions. view less
Compliance Highlights Unavailable
|
|
| FANCOL® CB | Elementis |
|
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ab...view more
FANCOL® CB is a yellowish white solid obtained from the roasted seeds of Theobroma Cacao. FANCOL® CB is Cocoa Butter USP/NF grade. It is a skin conditioning occlusive agent and may be used as a skin protectant in OTC drug products. FANCOL® CB has the ability to maintain a molded shape, while also mixed with other products. This combined with it melting at body temperature, allowing it to release actives, makes it a good product for suppositories. FANCOL® CB has an excellent stability profile. view less
Compliance Highlights Available
|
|
| FANCOL® HS3 US | Elementis |
|
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosm...view more
FANCOL® HS3 US is a compound of non-polar triglycerides and polar phosphor- and glycol- lipids, sulfonated castor oil, propylene glycol and PEG-12 oleate. FANCOL® HS3 US is a highly effective wetting and dispersing agent and emulsifier for use in the cosmetic industry. It has emollient, moisturizing and conditioning effects. It readily dissolves in water to produce a clear solution. It is valuable in shampoos and conditioners to impart softness and shine. view less
Compliance Highlights Unavailable
|
|
| FANCOL® LA SUPERFINE-P | Elementis |
|
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work...view more
FANCOL® LA SUPERFINE-P is a complex mixture of pure natural fatty alcohols derived from lanolin. This mixture of organic alcohols is obtained through the hydrolysis of Lanolin. FANCOL® LA SUPERFINE-P is pastillated, making it significantly easier to work with. FANCOL® LA SUPERFINE-P acts as an emulsifying agent for both o/w and w/o emulsions and can be used over a wide pH range. FANCOL® LA SUPERFINE-P has a high surface activity so can reduce interfacial tension of mineral oil/water. It can also significantly increase the water absorbing capacity of hydrocarbon systems. view less
Compliance Highlights Available
|
|
| FANCOL® LA-15 | Elementis |
|
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsify...view more
FANCOL® LA-15 is the Polyethylene Glycol ether of Lanolin Alcohol. It is a primary O/W emulsifier and is 100% active. FANCOL® LA-15 is an emollient emulsifier, which provides excellent skin conditioning and effective moisturization. The powerful emulsifying properties of Lanolin Alcohol are now available to create stable O/W emulsions or even microemulsions with fine emollient and spreading properties. It can couple Lanolin Oil into shampoo systems to provide emollience and conditioning to the hair after shampooing. As FANCOL® LA-15 is a nonionic material, it will show excellent stability coupled with powerful emulsifying properties under high acidic and highly alkaline conditions. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 250-CG | Elementis |
|
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofin...view more
FANCOL® POLYISO® 250-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 250-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 250-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 250-CG can be used as a substitute for Mineral Oil. FANCO®L POLYISO® 250-CG provides lubricity. FANCOL POLYISO 250-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 275-CG | Elementis |
|
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing...view more
FANCOL® POLYISO® 275-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 275-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 275-CGacts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 275-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 275-CG provides lubricity. FANCOL® POLYISO® 275-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 300-CG | Elementis |
|
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing...view more
FANCOL® POLYISO® 300-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 300-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 300-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 300-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 300-CG provides lubricity. FANCOL® POLYISO® 300-CGcan be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 450-CG | Elementis |
|
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofin...view more
FANCOL® POLYISO® 450-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 450-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 450-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 450-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 450-CG provides lubricity. FANCOL® POLYISO® 450-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® POLYISO® 800-CG | Elementis |
|
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofin...view more
FANCOL® POLYISO® 800-CG is a long chain aliphatic hydrocarbon. It is stable in a very wide pH range (pH 4-9). FANCOL® POLYISO® 800-CG can be used in decorative cosmetics, haircare and skincare applications. FANCOL® POLYISO® 800-CG acts as a waterproofing agent. It enhances shine when used in decorative cosmetic formulations. FANCOL® POLYISO® 800-CG can be used as a substitute for Mineral Oil. FANCOL® POLYISO® 800-CG provides lubricity. FANCOL® POLYISO® 800-CG can be formulated with the other FANCOL® POLYISO® CG products to supply an average molecular weight between 200 and 1400. view less
Compliance Highlights Available
|
|
| FANCOL® SHEA BUTTER | Elementis |
|
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA B...view more
FANCOL® SHEA BUTTER is a natural fat obtained from the fruit of the Shea tree. Shea Butter is an excellent ointment base. It has an unusually high content of oil unsaponifiable matter far exceeding that of Cocoa Butter. It is from this that FANCOL® SHEA BUTTER shows its ability to protect the skin from sun and helps to ease superficial skin irritation. Its oily qualities improve skin softness. FANCOL® SHEA BUTTER is an excellent skin conditioning agent, which melts at body temperature, giving it good spreadibility. FANCOL® SHEA BUTTER enhances shine and has excellent superfatting qualities. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOL® VB | Elementis |
|
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pig...view more
FANCOL® VB consists of vegetable derived lipids and sterol enriched shea butter extract. FANCOL® VB is extremely valuable as a moisturizer/humectant in creams, lotions, lip care and ointment based products. In color cosmetics FANCOL® VB exhibits good pigment wetting properties. This product is compliant with ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCOR® ABYSSINIAN OIL | Elementis |
|
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percen...view more
FANCOR® ABYSSINIAN OIL is a clear, yellow oil with a mild, pleasant odor. It is a natural oil, and is non-GMO derived. FANCOR® ABYSSINIAN OIL has a unique molecular structure not found in any other naturally occurring substance. It contains a high percentage of unsaturated C22 fatty acids. Furthermore, it is liquid at room temperature, even though it is of high molecular weight. FANCOR® ABYSSINIAN OIL is stable against heat breakdown and is highly resistant to oxidation.
FANCOR® ABYSSINIAN OIL has a high surface tension and gives good spreadability. It provides natural luster, lubricity and an emollient feeling to hair care products. FANCOR® ABYSSINIAN OIL provides excellent pigment wetting and is a very efficient pigment dispersant, which leaves behind an elegant cushioning skin feel. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| FANCOR® LANWAX | Elementis |
|
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty ...view more
FANCOR® LANWAX is a high molecular weight wax ester fraction derived from natural Lanolin. It is a complex mixture of esters of straight chain, branched chain and hydroxyl fatty acids with aliphatic, steroid, triterpenoid alcohols. It also contains fatty esters of Cholesterol and other sterols. FANCOR® LANWAX is used in water in oil systems to provide firmness, emolliency, improved consistency and stability. As such, it finds wide use not only in creams and lotions, but also is most valuable in lip formulations. It will add acceptable tact to hair grooming preparations and will serve as a plasticizer in wax crayons. It is an excellent bodying agent.
FANCOR® LANWAX is valuable as a low cost replacer or extender for other natural waxes in all applications including the manufacturing of candles. Not only will it act as an emulsifier, but it also serves as a crystallization inhibitor for other waxes. In polishes it will help reduce slip without interfering with gloss. view less
Compliance Highlights Available
|
|
| FANCOR® MEADOWFOAM SEED OIL | Elementis |
|
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique...view more
FANCOR® MEADOWFOAM SEED OIL is extracted from the seeds of the Limnanthes Alba (Meadowfoam) plant by a mechanic extrusion process and is refined afterward. It has a light yellow color and is practically odor free. FANCOR® MEADOWFOAM SEED OIL has a unique molecular structure not found in any other naturally occurring substance. FANCOR® MEADOWFOAM SEED OIL contains approximately 95% fatty acids having chain lengths of 20-22 Carbon atoms. The typical fatty acid profile is as follows: C20:1(61%), C22:1(16%) and C22:2(18%). Most importantly, the unsaturated double bonds are located at the Δ5 and Δ13 position. Combination of lack of conjugated double bonds and carrying its natural antioxidant brings this oil extraordinary oxidative stability. Furthermore, it is liquid at room temperature regardless its high molecular weight. It is effective against heat breakdown and is resistant to oxidation. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-1 | Elementis |
|
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and t...view more
FANCORSIL® LIM-1 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-1 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule. FANCORSIL® LIM-1 is soluble in water. FANCORSIL® LIM-1 has excellent conditioning and moisturizing properties in both skin and haircare applications. FANCORSIL® LIM-1 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-1 can be used as a shine enhancer in decorative cosmetics and hair care products while also helping to build body to the formulation. FANCORSIL® LIM-1 does not depress foam, but adds density and more creaminess to the foam. view less
Compliance Highlights Available
|
|
| FANCORSIL® LIM-2 | Elementis |
|
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and ...view more
FANCORSIL® LIM-2 is manufactured by complexing the fatty acid of the natural triglyceride Meadowfoam Seed Oil (Limnanthes Alba) with silicone. FANCORSIL® LIM-2 gives the combined properties of the conditioning associated with the Meadowfoam Seed Oil and the properties of silicone in a single molecule.
FANCORSIL® LIM-2 is not soluble in water and is easily emulsified with hair and skin care systems to contribute lubricity without greasiness. FANCORSIL® LIM-2 has excellent conditioning and moisturizing properties in both skin and hair care leave-on applications. FANCORSIL® LIM-2 can be absorbed into the hair cuticle and help repair damaged hair. FANCORSIL® LIM-2 can be used as a shine enhancer in hair care products while also helping to build body to the formulation. view less
Compliance Highlights Unavailable
|
|
| Kojic Acid Dipalmitate Brillian-MB228 | Beijing Brilliance Bio |
|
Brillian-MB228 is derived from Kojic Dipalmitate. It is a highly effective, stable whitening agent. This product can effectively inhibit the tyrosinase activity and pigment formation and can widely be used in various advanced cosmetics.
Compliance Highlights Available
|
|
| LAN-AQUA-SOL™ 75:50 | Elementis |
|
LAN-AQUA-SOL™ 75:50 is the Polyethylene Glycol derivative of Lanolin. LAN-AQUA-SOL™ 75:50 is a non-ionic polyoxyalkaline Lanolin ether-ester derived by attaching hydrophilic groups to Anhydrous Lanolin, thereby imparting water solubility. LAN-AQUA-SOL™ 75...view more
LAN-AQUA-SOL™ 75:50 is the Polyethylene Glycol derivative of Lanolin. LAN-AQUA-SOL™ 75:50 is a non-ionic polyoxyalkaline Lanolin ether-ester derived by attaching hydrophilic groups to Anhydrous Lanolin, thereby imparting water solubility. LAN-AQUA-SOL™ 75:50 is in a 50% active form. It is a water soluble Lanolin and acts as a non-ionic surfactant. view less
Compliance Highlights Unavailable
|
|
| MEADOWESTOLIDE® | Elementis |
|
MEADOWESTOLIDE® is a unique, functionally significant derivative of Meadowfoam Seed Oil. The development of this estolide represents a new level of advanced ingredient technology. The estolide is a dimeric molecule, which is structurally sophisticated and...view more
MEADOWESTOLIDE® is a unique, functionally significant derivative of Meadowfoam Seed Oil. The development of this estolide represents a new level of advanced ingredient technology. The estolide is a dimeric molecule, which is structurally sophisticated and functionally active. MEADOWESTOLIDE® provides measureable and meaningful consumer benefits. In hair, the estolide improves intra-fiber moisture retention and thereby imparts protection from thermal damage, while restoring the elasticity and reducing the coefficient of friction of the hair cuticle surface to prevent mechanical damage.
In skincare systems, MEADOWESTOLIDE® helps to adjust the hydration levels of the interstitial spaces and provides significant moisturization benefits. These benefits are often perceived as softer, more pliant tissue. Initial investigations suggest that the estolide will prove to be a very important agent in protecting skin from the damaging effects of a variety of common causes. MEADOWESTOLIDE® has been incorporated into decorative cosmetics where significant attributes were observed including improved elegance in product texture and, in the case of pigment delivery, considerably better color pay-off. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Available
|
|
| MEADOWLACTONE® | Elementis |
|
MEADOWLACTONE® contains a cyclical lactone ring derived from a 5-hydroxy moiety on the Meadowfoam fatty acid, in a Meadowfoam fatty acid matrix. The lactone ring confers a hydrophilic nature to that terminal end of the molecule while the long fatty acid c...view more
MEADOWLACTONE® contains a cyclical lactone ring derived from a 5-hydroxy moiety on the Meadowfoam fatty acid, in a Meadowfoam fatty acid matrix. The lactone ring confers a hydrophilic nature to that terminal end of the molecule while the long fatty acid chain confers lipophilic attributes to the rest of the molecule. MEADOWLACTONE® has amphoteric properties, since the lactone ring will open and close as a function of pH and the ionic character of the environment. MEADOWLACTONE® can help provide balanced moisturization, to improve tone, elasticity and help reduce dryness of the skin. MEADOWLACTONE® can help reduce irritancy caused by some products. This product is compliant with COSMOS, Vegan, and ISO 16128 requirements. view less
Compliance Highlights Unavailable
|
|
| MEADOWQUAT® HG-70 | Elementis |
|
MEADOWQUAT® HG-70 is produced by reacting Meadowfoam Seed Oil to form this sulfated (nonchloride) quaternium compound for enhancing the conditioning effects of Meadowfoam fatty acids in hair conditioners and skin care products. MEADOWQUAT® HG-70 is 70% ac...view more
MEADOWQUAT® HG-70 is produced by reacting Meadowfoam Seed Oil to form this sulfated (nonchloride) quaternium compound for enhancing the conditioning effects of Meadowfoam fatty acids in hair conditioners and skin care products. MEADOWQUAT® HG-70 is 70% active. MEADOWQUAT® HG-70 can be used in cationic hair conditioning formulations. It provides excellent skin conditioning. MEADOWQUAT® HG-70 is particularly useful in hair coloring products for color treated hair, enhancing condition and color durability. view less
Compliance Highlights Unavailable
|
