| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| DABCO® 1027 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1027 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled activity catalyst for MEG extended polyester and polyether systems. | |
| DABCO® 1028 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1028 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled-activity catalyst for 1,4-butanediol extended polyester and polyether systems. | |
| DABCO® 25 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 25 S is 25% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 LV | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 LV is a 33% TEDA dissolved in dipropylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 S is 33% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 8154 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 8154 is an acid-blocked delayed action catalyst that is useful in extending pot life. | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less | |
| DABCO® DMDEE | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DMDEE is an amine catalyst that is isocyanate stable. It is used in one component moisture cured applications in CASE. | |
| DABCO® EG | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® EG is 33% TEDA dissolved in ethylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® LK 221 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® LK 221 is an organic surfactant that serves as a good emulsifier, epsecially for 1,4-BDO in polyol blends, and improves adhesion. | |
| DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
| DABCO® NE 1070 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. | |
| DABCO® NE 1091 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties. | |
| DABCO® NE 300 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts. | |
| DABCO® T 12 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 12 is a dibutyltin dilaurate. Strong gel catalyst. Moderate hydrolytic stability. | |
| DABCO® T 120 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 120 is a strong gel catalyst with good hydrolytic stability. | |
| DABCO® T 131 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 131 is a strong gel catalyst with good hydrolytic stability which provides a more delayed action than DBTDL. | |
| ESTISOL 140 | Esti Chem A/S | ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as...view more ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 150 | Esti Chem A/S | ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as...view more ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 165 | Esti Chem A/S | ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as...view more ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 170 | Esti Chem A/S | ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as...view more ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 180 | Esti Chem A/S | ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as...view more ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 240 | Esti Chem A/S | ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as...view more ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 242 | Esti Chem A/S | ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as...view more ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 260 | Esti Chem A/S | ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as...view more ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 295 | Esti Chem A/S | ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as...view more ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 300 | Esti Chem A/S | ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as...view more ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 305 | Esti Chem A/S | ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as...view more ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 312 | Esti Chem A/S | ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as...view more ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 390 | Esti Chem A/S | ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...view more ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| KOSMOS® T 100 | Evonik Operations GmbH, BL Comfort & Insulation | KOSMOS® T 100 is the strongest gel catalyst particularly suitable for fast curing applications such as spray coatings and RIM. | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| ORTEGOL® AB | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® AB is a silicone-based abrasion reducer; easy to blend into the system. | |
| ORTEGOL® AST 8 | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® AST 8 is a highly potent antistatic agent with no impact on physical properties. | |
| ORTEGOL® COM | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® COM is an emulsifier enhancing the miscibility between various formulation ingredients; ideal for blends of otherwise incompatible polyols. | |
| ORTEGOL® NOP | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® NOP is an emulsifier enhancing miscibility of polyester or polyether polyols with natural oil based polyols. | |
| POLYCAT® DBU | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature. | |
| POLYCAT® SA 1 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
| POLYCAT® SA 102 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 102 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1. | |
| POLYCAT® SA 2 LE | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure. | |
| POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
| POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
| POLYCAT® SA 8 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| TEGOSTAB® B 8900 | Evonik Operations GmbH, BL Comfort & Insulation | TEGOSTAB® B 8900 is a silicone-based surfactant with strong cell-opening and degassing properties. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| VERSALINK® 740 M | Evonik Operations GmbH, BL Comfort & Insulation | VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepol...view more VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepolymers. Allowing for excellent physical properties, formulations using our VERSALINK® curatives combine the material performance of polyurea with the ease of use that comes with long pot-life of the formulation. view less | |
| VERSALINK® P 1000 | Evonik Operations GmbH, BL Comfort & Insulation | VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepol...view more VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepolymers. Allowing for excellent physical properties, formulations using our VERSALINK® curatives combine the material performance of polyurea with the ease of use that comes with long pot-life of the formulation. view less | |
| VERSALINK® P 250 | Evonik Operations GmbH, BL Comfort & Insulation | VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepol...view more VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepolymers. Allowing for excellent physical properties, formulations using our VERSALINK® curatives combine the material performance of polyurea with the ease of use that comes with long pot-life of the formulation. view less | |
| VERSALINK® P 650 | Evonik Operations GmbH, BL Comfort & Insulation | VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepol...view more VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepolymers. Allowing for excellent physical properties, formulations using our VERSALINK® curatives combine the material performance of polyurea with the ease of use that comes with long pot-life of the formulation. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less |
