| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...view more BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. view less | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...view more CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. view less | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...view more CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. view less | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...view more CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. view less | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...view more CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. view less | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...view more CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. view less | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...view more CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. view less | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...view more CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. view less | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...view more CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| ESTISOL 140 | Esti Chem A/S | ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as...view more ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 150 | Esti Chem A/S | ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as...view more ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 165 | Esti Chem A/S | ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as...view more ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 170 | Esti Chem A/S | ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as...view more ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 180 | Esti Chem A/S | ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as...view more ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 240 | Esti Chem A/S | ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as...view more ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 242 | Esti Chem A/S | ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as...view more ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 260 | Esti Chem A/S | ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as...view more ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 295 | Esti Chem A/S | ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as...view more ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 300 | Esti Chem A/S | ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as...view more ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 305 | Esti Chem A/S | ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as...view more ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 312 | Esti Chem A/S | ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as...view more ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| ESTISOL 390 | Esti Chem A/S | ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...view more ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. view less | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less |
