| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...view more HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. view less | |
| WorléeCryl® L 241 | Worlée-Chemie G.m.b.H. | WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessar...view more WorléeCryl® L 241 is a neutral low odour acrylic resin, mainly for wall and ceiling paints. It has very good insulating coat properties for nicotine-, chimney- and water spots. W´Cryl L 241 is a soft acrylic resin. Additional plasticizers are not necessary. It has a non-volatile content of 60% ± 1. view less | |
| VINAVIL® 4830 | VINAVIL Americas Corp. | VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), formaldehyde, plasticizers...view more VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), formaldehyde, plasticizers and coalescing agents. The end product will have high gloss, blocking resistance, chemical and mechanical resistance, and good wet/dry adhesion. view less | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...view more L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. view less | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...view more L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. view less | |
| ACRONAL® 81 D | BASF Dispersions & Resins | ACRONAL 81 D is a flooring adhesives binder with high cohesive strength, plasticizer resistance, and good filler acceptance. It is non-ammonia. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2851 | Chan Sieh Enterprises Co, Ltd. | L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and ...view more L-2851 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides chemical and abrasion resistance, and good adhesion to substrates. It can be used in concrete coatings, wall paints, and plastic and metal coatings. view less | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...view more L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. view less | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...view more L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. view less | |
| L-2883 | Chan Sieh Enterprises Co, Ltd. | L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and l...view more L-2883 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is hard and flexible, provides good abrasion and chemical resistance, with good adhesion. It can be used to coat paper, plastic, concrete, metal, wood, parquet and lacquer. view less | |
| Polarite 402A | Imerys Performance Additives | Polarite 402A is a Fine Calcined clay surface treated with amino based silane to provide improved adhesion, dimensional stability and enhanced mechanical properties for the plastics, elastomers and coatings markets. | |
| L-3021 | Chan Sieh Enterprises Co, Ltd. | L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic ...view more L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic and wood coating, if combined with an acrylic emulsion. view less | |
| VINAVIL® 03V | VINAVIL Americas Corp. | VINAVIL® 03V, in the form of a transparent, bright film, is a vinyl acetate-veova copolymer emulsion that has been stabilized with anionic surfactants, which can be used in indoor water-based paints, outdoor emulsion paints, wall textured coatings, wall p...view more VINAVIL® 03V, in the form of a transparent, bright film, is a vinyl acetate-veova copolymer emulsion that has been stabilized with anionic surfactants, which can be used in indoor water-based paints, outdoor emulsion paints, wall textured coatings, wall primers, and grit plastic coatings. This product is resistant to light exposure. view less | |
| JONCRYL® 1532 | BASF Dispersions & Resins | JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions...view more JONCRYL 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions. This product exhibits low VOC capability. view less | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...view more SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. view less | |
| L-2857 | Chan Sieh Enterprises Co, Ltd. | L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal ...view more L-2857 is an aliphatic polyether polyol with a solid content ratio of 34%. This product is tough and flexible, provides good chemical and abrasion resistance, and adheres well. It can be used to coat parquet and cork floors, concrete, wall paint, metal and plastic. It can also be used as an anti-gravity coating. view less | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...view more L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. view less | |
| L-2916 | Chan Sieh Enterprises Co, Ltd. | L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing ...view more L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing repair coatings, floor polishes and wood primers, and coatings for paper, plastic, wood and parquet. view less | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstandi...view more WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstanding gloss, hardness, chemical- and weather-resistance. Application fields for W´Cryl A 2141 are high solid paints for facade elements, caravans and plastics. view less | |
| CN9013 | Sartomer Americas | CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkag...view more CN9013 is a clear liquid multifunctional urethane acrylate oligomer. This product imparts good adhesion, weatherability, and good chemical resistance. It also has excellent abrasion resistance to radiation-cure coatings, a fast cure response, low shrinkage, and high hardness. CN9013's suggested applications are for wood, plastic, metal, floor, and other abrasion resistant coatings. view less | |
| L-2919 | Chan Sieh Enterprises Co, Ltd. | L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finish...view more L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finishing repair coatings, floor polish, wood primer, and to coat paper, plastic, wood, and parquet. view less | |
| L-3050 | Chan Sieh Enterprises Co, Ltd. | L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be use...view more L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be used as the top-coat for PVC and non-PVC flooring, and to coat metal, wood and parquet. view less | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...view more SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...view more SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. view less | |
| FAP-100 | FTC Korea Co.,Ltd | FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industr...view more FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industrial coatings, and silk screen inks. view less | Request Sample |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...view more L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. view less | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...view more SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| EPS® 2843 | EPS Materials | EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for u...view more EPS® 2843 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS® 2843 provides paint formulators a low VOC waterborne alternative to solventbased primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. view less | Request Sample |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...view more IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. view less | |
| Novares® LS 500 | Rain Carbon Germany GmbH | NOVARES® LS 500 is a harmless replacement of Nonylphenol as accelerator for the epoxy curing. In EP, but also in PU and thermoplastic polyacrylics it is an excellent plasticizer, pigment wetting agent, and compatibilizer. Depending on national standards N...view more NOVARES® LS 500 is a harmless replacement of Nonylphenol as accelerator for the epoxy curing. In EP, but also in PU and thermoplastic polyacrylics it is an excellent plasticizer, pigment wetting agent, and compatibilizer. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information are available upon request. view less | |
| Novares® TT 30 | Rain Carbon Germany GmbH | Novares® TT 30 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter...view more Novares® TT 30 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TT 140 | Rain Carbon Germany GmbH | Novares® TT 140 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promote...view more Novares® TT 140 is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TT 140 M | Rain Carbon Germany GmbH | Novares® TT 140 M is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promo...view more Novares® TT 140 M is a solid hydrocarbon resin with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TN 100 | Rain Carbon Germany GmbH | Novares® TN 100 is a solid hydrocarbon resin (SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardn...view more Novares® TN 100 is a solid hydrocarbon resin (SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TN 110 | Rain Carbon Germany GmbH | Novares® TN 110 is a solid hydrocarbon resin (110°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness...view more Novares® TN 110 is a solid hydrocarbon resin (110°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TT 90 | Rain Carbon Germany GmbH | Novares® TT 90 is a solid hydrocarbon resin (SP 90°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardnes...view more Novares® TT 90 is a solid hydrocarbon resin (SP 90°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TT 100 | Rain Carbon Germany GmbH | Novares® TT 100 is a solid hydrocarbon resin(SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardne...view more Novares® TT 100 is a solid hydrocarbon resin(SP 100°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| Novares® TT 120 | Rain Carbon Germany GmbH | Novares® TT 120 is a solid hydrocarbon resin (SP 120°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardn...view more Novares® TT 120 is a solid hydrocarbon resin (SP 120°C) with excellent solubility in common polar and non-polar solvents. In systems based on EP, PU, polyacrylics and alkyd it is used as an adhesion promoter, hydrophobing agent, resistance enhancer, hardness promoter, viscosity modifiers, carrier for pigment grinding, and plasticizer. Detailed information is available upon request. view less | |
| DOUBLEMER® 594 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 594 is an aliphatic urethane acrylate oligomer diluted 15~20 % with 1, 6-hexanediol diacrylate (HDODA) monomer. Films of DOUBLEMER® 594 cured by ultraviolet light (UV) or electron beam (EB) systems perform good abrasion resistance, stain resist...view more DOUBLEMER® 594 is an aliphatic urethane acrylate oligomer diluted 15~20 % with 1, 6-hexanediol diacrylate (HDODA) monomer. Films of DOUBLEMER® 594 cured by ultraviolet light (UV) or electron beam (EB) systems perform good abrasion resistance, stain resistance, toughness and the non-yellowing typical properties similar to those of an aliphatic urethane. Formulated UV/EB curable products containing DOUBLEMER® 594 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in: wood and vinyl flooring; coatings on plastic; and clear coatings. view less | |
| Novares® L 100 | Rain Carbon Germany GmbH | Novares® L 100 is a liquid low viscous modifier (50 - 150 mPas @ 25°C) without phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...view more Novares® L 100 is a liquid low viscous modifier (50 - 150 mPas @ 25°C) without phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| UROTUF® L63-MPW-38 | Polynt Composites | UROTUF® L63-MPW-38 is an anionic-stabilized aliphatic urethane polymer containing 38% solids in a blend of N-methylpyrrolidone and water. This product offers a low VOC at a quick dry rate. It can be crosslinked with polyaziridine and carbodiimides. It has...view more UROTUF® L63-MPW-38 is an anionic-stabilized aliphatic urethane polymer containing 38% solids in a blend of N-methylpyrrolidone and water. This product offers a low VOC at a quick dry rate. It can be crosslinked with polyaziridine and carbodiimides. It has good chemical and solvent resistance. UROTUF® L63-MPW-38 can be used in air-dry and force cure coatings, clear architectural coatings for wood, and coatings for rigid or semi-rigid plastics. view less | |
| Novares® LC 15 | Rain Carbon Germany GmbH | Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 25 | Rain Carbon Germany GmbH | Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 40 | Rain Carbon Germany GmbH | Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 100 | Rain Carbon Germany GmbH | Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing a...view more Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1000 | Rain Carbon Germany GmbH | Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...view more Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1900 | Rain Carbon Germany GmbH | Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...view more Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 20 | Rain Carbon Germany GmbH | Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 45 | Rain Carbon Germany GmbH | Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| WorléePol® V 450 | Worlée-Chemie G.m.b.H. | WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plastic...view more WorléePol® V 450 is a water thinnable, low viscous, high reactive polyester resin without amine addition. It is used for the manufacture of water thinnable, acid curing impregnations and lacquers for wood decoration foils. W´Pol V 450 is used as a plasticizer. Due to the high reactivity it is possible to cure application quantities of approx. 25 g/m² wet film during 20 - 30 s at approx. 140 °C or 40 - 60 s at approx. 130 °C and excellent resistance properties are achieved. view less | |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industri...view more TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion on many plastics such as PC, ABS, PS, PA, PMMA, PVC, Noryl. view less | Request Sample |
| Novares® L 800 | Rain Carbon Germany GmbH | Novares® L 800 is a liquid high viscous hydrocarbon modifier (800 - 1000 mPas@ 25°C) based on hydrophobic monomers, which leads to great chemical and saltspray resistance in epoxy, polyurethane systems. It also increases flexibility and reduces viscosity ...view more Novares® L 800 is a liquid high viscous hydrocarbon modifier (800 - 1000 mPas@ 25°C) based on hydrophobic monomers, which leads to great chemical and saltspray resistance in epoxy, polyurethane systems. It also increases flexibility and reduces viscosity without contributing to VOC. The main application is corrosion protection for industrial paints, heavy duty marine paints, civil engineering and roof coating. This product can be used as plasticizer and also works as adhesion promoter and hyrophobing agent. Detailed information are available upon request. view less | |
| Novares® LA 300 | Rain Carbon Germany GmbH | Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...view more Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 50 | Rain Carbon Germany GmbH | Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 65 | Rain Carbon Germany GmbH | Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, po...view more Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 55 | Rain Carbon Germany GmbH | Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LC 60 | Rain Carbon Germany GmbH | Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 700 | Rain Carbon Germany GmbH | Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasti...view more Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| Novares® LA 1200 | Rain Carbon Germany GmbH | Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a ...view more Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...view more EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. view less | |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...view more SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. view less | Request Sample |
| BYD5110 | Tianyi Chemical Engineering Material Co., Ltd. | BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH val...view more BYD5110, in the form of a white, waterborne anionic emulsion, is a vinyl acrylic copolymer that can be used in Mercerized interior wall coatings and PVC interior coatings. This product carries pigment well and is compatible with color pastes. Its pH value is 4.0 +/- 1.0. view less | |
| ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
| ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
| ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
| ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less | Request Sample |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
