| GENOMER* 3143 | Rahn USA Corp. | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOMER* 4293 | Rahn USA Corp. | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| GENOMER* 2259 | Rahn USA Corp. | GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...view more GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. view less | Request Sample |
| EBECRYL® 5850 | Allnex | EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch...view more EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance. view less | Request Sample |
| GENOMER* 3486 | Rahn USA Corp. | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...view more GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. view less | Request Sample |
| GENOMER* 6058 | Rahn USA Corp. | GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and v...view more GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and varnishes; wood coatings; screen inks; and plastic coatings. view less | Request Sample |
| GENOMER* 4425 | Rahn USA Corp. | GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are require...view more GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are required. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastics and metal; wood coatings; flexo inks; and screen inks. view less | Request Sample |
| Domalkyd 0545 40 Wa | HELIOS RESINS | Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based...view more Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance approach as certified by the ISCC PLUS). view less | |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. view less | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. view less | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. view less | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. view less | Request Sample |
| RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. view less | Request Sample |
| GENOMER* 7287 | Rahn USA Corp. | GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very...view more GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very low gloss coatings on plastic packaging; flexo inks; wood coatings; and screen inks. The low viscosity allows a high load of matting agent. The matting effect is only achieved when GENOMER* 7287 is combined with other oligomers or monomers. view less | Request Sample |
