| KELSOL® 585-W-43 | Polynt Composites | KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be ...view more KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be used in fast air-dry or force-dry industrial primers, enamels, and clear finishes. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| WorléeKyd L 138 | Worlée-Chemie G.m.b.H. | WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short o...view more WorléeKyd L 138 is a short oil phenolic modified alkyd resin suitable for the manufacture of air drying and stoving primers, under coats, surfacers, and fillers. This grade has a non-volatile content of 60% ± 1. W´Kyd L 138 is compatible with most short oil alkyds and with some medium oil length alkyds and nitro cellulose. To reduce the viscosity and improve viscosity stability in heavily filled systems, a small addition of an alcohol, e.g. butanol is recommended. view less |
