| Disvacryl-1019 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1019 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in fast-drying polyurethane coatings with good UV resistance. It can also be used in wood coatings. | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...view more Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. view less | |
| Hauthane L-3101 | Hauthaway | Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 ...view more Hauthane L-3101 is a very hard, NMP-free/APEO-free, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. It was developed for general coatings use where exceptional resistance to hydrolysis, oxidation and UV degradation is required. L-3101 is ideally suited for exterior applications where film durability and longevity are important considerations. L-3101 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology. view less | |
| Isocryl® EP-450 | Estron Chemical, Inc. | Isocryl® EP-450 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-450 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-450, with a Tg of 68°C, has the added feature of high resistance to sintering at storage temperatures of up to 40°C. Isocryl® EP-450 is recommended for locations where climate controlled storage is not accessible. view less | |
| Lumicryl® 1000 | Estron Chemical, Inc. | Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternativel...view more Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternatively, Lumicryl® 1000 may be appropriate for use as the major film forming component of UV curable coatings. view less | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...view more Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. view less | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...view more Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. view less | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...view more Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. view less | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| RAYCORE® 9534A | Specialty Polymers, Inc. | RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has th...view more RAYCORE® 9534A is an anionic self-crosslinking polyurethane-acrylic core shell hybrid. This product is intended to provide chemical, scratch and UV resistance. The products properties allow it to adhere to several different surfaces. RAYCORE® 9534A has the ability to be formulated to low VOC levels. The RAYCORE® 9534A topcoat protects surfaces from scratches, chemicals and water corrosion. view less | |
| RAYFLEX® 2024 | Specialty Polymers, Inc. | RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...view more RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. view less | |
| RAYFLEX® 777 | Specialty Polymers, Inc. | RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low tempe...view more RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low temperature flexibility and tensile properties that adhere to polyurethane foam and different construction substrates. RAYFLEX® 777 primary uses are to coat construction roofs and provide UV protection, water resistance and temperature flexibility. view less | |
| StanChem SC 5186 | StanChem Polymers | StanChem SC 5186 is general-purpose polyvinyl acetate. It deposits a clear, tough film, which exhibits excellent resistance to heat and light. It provides good adhesion to cellulose. Films of SC 5186 exhibit good blocking resistance. | Request Sample |
| Ultrafine™ 1W A | Lawter | Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective perfo...view more Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal deco and overprint varnishes. view less | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...view more Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. view less | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...view more Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. view less | |
| Ultrapoly™ 211 A | Lawter | Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects...view more Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects film in the earliest phases of the printing process. Ultrapoly™ 211 A is suitable for use in sheet-fed offset inks and in UV, OPV inks. view less | |
| Ultrapoly™ 213 A | Lawter | Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed ...view more Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed and heatset inks, in UV and metal decorating inks. view less | |
| Ultrapoly™ 2300 A | Lawter | Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip a...view more Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip are needed. The product is fast-setting and non-volatile and protects film in the earliest phase of printing while developing toughness over time. Ultrapoly™ 2300 A is considered ideal for use in sheet-fed offset inks and in UV and OPV metal decorating inks. view less |
