| Dispersion-Silicate Facade Paint, Water Based (Formulation #F14402.0 [1]) | Hoffmann Mineral | Dispersion-Silicate Facade Paint, Water Based (Formulation #F14402.0 [1]) featuring SILLITIN N 85. | |
| Reducing Leachable Components in Waterborne Architectural Paints | BASF Dispersions & Resins | The composition of waterborne paints and coatings rely on several surface active or water soluble components for their production, stability and performance. Unfortunately these ingredients can migrate to the paint surface leaving visible streaks referred...view more The composition of waterborne paints and coatings rely on several surface active or water soluble components for their production, stability and performance. Unfortunately these ingredients can migrate to the paint surface leaving visible streaks referred to as “Surfactant Leaching/Staining” or “Snail Trails”. Staining typically occurs after the paint has been exposed to specific conditions such as high humidity and water condensation. The presence of water on a paint surface can concentrate leachable materials into a non-uniform pattern of visible glossy streaks. A careful selection of formulation ingredients can help reduce the extent of staining. view less | |
| Alkali Resistant Waterbased Primer (Formulation #4641-010) | BASF Dispersions & Resins | This alkali resistant waterbased primer to meet MPI #3 and features ACRONAL PLUS® 4641. | |
| Water-borne Alkyd Emulsion Red Iron Oxide Primer (Formulation #111413) | Vanderbilt Minerals, LLC | A formulation for a water-borne alkyd emulsion red iron oxide primer which utilizes VAN GEL® SX, DARVAN® CN, VANSIL® W-30, and ACTIV-8®. | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. view less | |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. view less | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. view less | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham USA | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. view less | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham USA | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...view more Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. view less | |
| Universal Stain-Blocking Primer - White (Formulation #EPS 2843 WHT1) | EPS Materials | Universal Stain-Blocking Primer - White (Formulation #EPS 2843 WHT1) formulation information. | |
| Tannin Stain Blocking Primer (Formulation #4410-001) | BASF Dispersions & Resins | This tannin stain blocking primer features ACRONAL® 4410. | |
| ACRONAL® PLUS 4415 Stain Blocking Primer | BASF Dispersions & Resins | ACRONAL PLUS 4415 is a styrene-acrylic latex for interior and exterior stain blocking primers at 50 g/L VOC. The latex can be widely applied, offering consistent, high-quality results for both interior and exterior primers. ACRONAL PLUS 4415 demonstrates ...view more ACRONAL PLUS 4415 is a styrene-acrylic latex for interior and exterior stain blocking primers at 50 g/L VOC. The latex can be widely applied, offering consistent, high-quality results for both interior and exterior primers. ACRONAL PLUS 4415 demonstrates limited ropes and flakes during sanding and excellent interior stain control. This latex further outperforms commercial products in both adhesion and alkali resistance. ACRONAL PLUS 4415 is the solution for the premium stain blocking primer market. view less | |
| Exterior Latex Deep Toned House Paint (Formulation #040212) | Vanderbilt Minerals, LLC | This formulation is for an exterior latex house paint which utilizes DARVAN® CN Dispersant, VANCIDE® MZ-98 Fungicide, and BILT-PLATES® 156 Clay. | |
| Alkyd Modified Acrylic Latex Maintenance Primer (Formulation #120313) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex maintenance primer which utilizes VAN GEL® ES, DARVAN® 7N, and ACTIV-8®. | |
| Alkyd Modified Acrylic Latex DTM Primer (Formulation #121813) | Vanderbilt Minerals, LLC | A formulation for an alkyd modified acrylic latex DTM primer which utilizes VAN GEL® SX, DARVAN® CN, BILT-PLATES® 156, and ACTIV-8®. | |
| Exterior Stain Blocking Primer (Formulation #4410-002) | BASF Dispersions & Resins | This exterior stain blocking primer features ACRONAL® 4410. | |
| Exterior Stain Blocking Primer with Halox XTAIN L-44 (Formulation #4641-009) | BASF Dispersions & Resins | This exterior stain blocking primer features ACRONAL PLUS® 4641. | |
| Exterior Stain Blocking Primer (Formulation #4641-006) | BASF Dispersions & Resins | This exterior stain blocking primer features ACRONAL PLUS® 4641. | |
| Red DTM Primer (Formulation #760-012) | BASF Dispersions & Resins | This red DTM primer features ACRONAL® S 760. | |
| White DTM Primer (Formulation #760-010) | BASF Dispersions & Resins | This white DTM primer features ACRONAL® S 760. |
