UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...view more UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
GENOMER* 4205 | Rahn USA Corp. | GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives. | Request Sample |
EBECRYL® 1200 | Allnex | EBECRYL® 1200 is used in UV curable coatings and is supplied as 55% in butyl acetate. It will be crosslinked to paint films with excellent hardness, flexibility and resistance to chemicals. | Request Sample |
6380 | GIMEL Technical Materials | 6380 is a hexafunctional polyester acrylate used in plastic coatings, wood coating primers, and inks. It has a fast curing response with good scratch resistance and pigment-wetting. It shows high gloss with excellent adhesion. | Request Sample |
Liquid NVC | BASF Corporation, Chemical Intermediates | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
Luna ACMO | DKSH | Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. ...view more Luna ACMO has been used for UV and EB curable resins (primarily inks and coatings). It has been found that ACMO displays similar properties as other reactive diluent monomers, such as N-vinyl pirrolidone (NVP), but exceeds them in performance and safety. Luna ACMO is used as a reactive diluent monomer for UV, EB curable resins in radicalic systems. Luna ACMO has good compatibility with oligomers, multi-functional acrylates, and resin components having a quicker hardening speed in the polymerization process than Isobornyl Acrylate and Phenoxyethyl Acrylate. Luna ACMO provides UV, EB curable resins made with a low hygroscopicity and good resistance to alkali, acids, and solvents. Moreover it has a nitrogen radical, which prevents generation of ozone inhibiting polymerization. This product is available in Europe, Asia and North America. view less | Request Sample |
Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
GENOCURE* MBF | Rahn USA Corp. | GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. | Request Sample |
SUO-2371 | DKSH | SUO-2371 is a urethane acrylate product. It is non yellowing acrylate oligomer which provides cure response when exposed to ultraviolet light (UV). Its chemical composition is mono functional aliphatic urethane acrylate. | Request Sample |
GENOMER* 7244 | Rahn USA Corp. | GENOMER* 7244 is a modified methacrylate oligomer developed for UV curable additive manufacturing. It is also suitable for nail gels and dental composites. It imparts exceptional hardness and good mechanical properties. | Request Sample |
EBECRYL® 4266 | Allnex | EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB c...view more EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film. view less | Request Sample |
UVECOAT® 9539 | Allnex | UVECOAT® 9539 is an amorphous unsaturated polyester resin for use in combination with other UVECOAT® resins to provide excellent adhesion of UV curable powder to a wide variety of metal substrates. | Request Sample |
New! GENOMER* 4281 | Rahn USA Corp. | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
BYK-011 | BYK | BYK-011 is a silicone-free, polymer-based defoamer for aqueous coating systems (also radiation curable systems). It is particularly recommended for two pack polyurethane systems and offers very good recoatability. | Request Sample |
SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...view more SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...view more SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
ROSKYDAL® K 36 | Allnex | ROSKYDAL® K 36 is an amine-accelerated, unsaturated polyester resin of high reactivity and low viscosity which is cold curing, even around 0°C, and forms polymers of medium flexibility. | Request Sample |
ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...view more ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. view less | |
EFKA® SL 3236 | BASF Formulation Additives | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable...view more EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. view less | |
Oligomer SM 6104-80 | Jiangsu Sanmu Group Corporation | Oligomer SM 6104-80 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, inks and adhesives. | |
Oligomer SM 6105-75 | Jiangsu Sanmu Group Corporation | Oligomer SM 6105-75 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in papers, woods and plastics. | |
Oligomer SM 6105-80 | Jiangsu Sanmu Group Corporation | Oligomer SM 6105-80 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in papers, woods and plastics. | |
SETAL® 16-1084 | Allnex | SETAL® 16-1084 is a saturated coil-coat polyester resin for use in thermoset coatings with a high order of post-cure and cold crush flexibility. | Request Sample |
GENOMER* 7311 | Rahn USA Corp. | GENOMER * 7311 is completely water-soluble prior to cure. Recommended applications are additive manufacturing, coatings for wood, paper, metal and plastics, water-based inks and varnishes. | Request Sample |
CN3715 | Sartomer Americas | CN3715 is an acrylated amine synergist with good reactivity, high flexibility and low pigment bleeding that improve surface cure when used with a suitable photoinitiator system. | |
Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
D.E.H.™ 82 | Univar Solutions | D.E.H.™ 82 is a high reactivity phenolic curing agent containing curing catalyst as well as a polyacrylate flow modifier. Can be formulated in low temperature applications in combination with D.E.R.™ 6615 solid epoxy resin. | Request Sample |
GENOCURE* BMS | Rahn USA Corp. | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...view more GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. view less | Request Sample |
SEA-700BA20 | DKSH | SEA-700BA20 is a fluorene epoxy acrylate, is high refractive index acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition sis fluorene epoxy acrylate / benzyl acrylate. | Request Sample |
SUO-8628 | DKSH | SUO-8628 is an urethane acrylate product. It is a polybutadiene urethane acrylate oligomer which provides cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional polybutadiene urethane acrylate. | Request Sample |
MIRAMER M210 | Rahn USA Corp. | MIRAMER M210 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, metal varnishes and plastic coatings. | Request Sample |
MIRAMER M284 | Rahn USA Corp. | MIRAMER M284 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks, industrial coatings and wood coatings. | Request Sample |
SEA-820 | DKSH | SEA-820 biphenyl novolac epoxy acrylate, is high refractive index acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Biphenyl novolac epoxy acrylate / acrylate monomer OPP(EO) A 20%. | Request Sample |
SUO-300 | DKSH | SUO-300 is an urethane acrylate product. It is non yellowing acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is tri-functional aliphatic urethane acrylate. | Request Sample |
SUO-8130 | DKSH | SUO-8130 is an urethane acrylate. It is a polybutadiene urethane acrylate oligomer which provides cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional aliphatic polybutadiene urethane acrylate. | Request Sample |
Saret® SR522D | Sartomer Americas | Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D co...view more Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D contains a safe, non-nitroso scorch retarder and exhibits low color and low staining. Suggested applications for this product include belts, cables, and hoses; as well as, injection molding, radiator hose, rolls, and other rubber and plastics applications. view less | |
SETALUX® 17-2450 | Allnex | SETALUX® 17-2450 is a hydroxy-functional acrylic polyol for two component vehicle refinish applications. This acrylic polyol is designed for fast curing clearcoat or single -state paint applications. When SETALUX® 17-2450 is combined with appropriate alip...view more SETALUX® 17-2450 is a hydroxy-functional acrylic polyol for two component vehicle refinish applications. This acrylic polyol is designed for fast curing clearcoat or single -state paint applications. When SETALUX® 17-2450 is combined with appropriate aliphatic polyisocyanates, provides fast cure with a longer pot-life for excellent application and appearance properties and the excellent attributes of DOI. SETALUX® 17-2450 is also has excellent early hardness development and is buffable in a couple of hours. view less | Request Sample |
DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | Request Sample |
Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...view more Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. view less | Request Sample |
GENOCURE* EMK | Rahn USA Corp. | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...view more GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. view less | Request Sample |
EBECRYL® 117 | Allnex | EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion. | Request Sample |
CRYLCOAT® 4655-2 | Allnex | CRYLCOAT® 4655-2 is a superdurable resin for curing with Primid® in a 95/5 ratio. CRYLCOAT® 4655-2 is preferably used as additive to improve blooming resistance and outdoor durability. | Request Sample |
SARBIO® 6102 Resin | Sartomer Americas | SARBIO® 6102 Resin is an excellent reactive diluent for oligomers. It produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
VESTAMIN® TMD | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alc...view more VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alcohols. Typical applications include the production of hardeners for epoxy resin systems and the synthesis of polyamides and polyurethane. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less | Request Sample |
Borchi® Gol LA 20 | Borchers, A Company of OMG | Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compati...view more Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine, epoxy and certain UV systems. It also controls surface effects in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
MONOLITE® Blue 515303 | Heubach Ltd | MONOLITE® Blue 515303 is a pigment blue 15:3 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings....view more MONOLITE® Blue 515303 is a pigment blue 15:3 Cu-phthalocyanine blue, beta-mod. powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It can be used for application in automotive, coil, powder, industrial, and decorative coatings. This product has a C.I. No. 74160, a CAS No. 147-14-8, a density of 1,6 g/cm^3, and a specific surface of 54 m^2/g. view less | Request Sample |
MONOLITE® Green 600734 | Heubach Ltd | MONOLITE® Green 600734 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coating...view more MONOLITE® Green 600734 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a density of 2,1 g/cm^3, a CAS No. of 1328-53-6, and a specific surface of 47 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
MONOLITE® Green 600735 | Heubach Ltd | MONOLITE® Green 600735 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coating...view more MONOLITE® Green 600735 is a pigment green 7 Cu-phthalocyanine green, chlorinated powder that is recommended for water-borne paints, air-drying alkyds, stoving enamels, acid curing systems, amine curing epoxies, isocyanate cured systems, and powder coatings. It has a C.I. No. of 74260, a density of 2,1 g/cm^3, a CAS No. of 1328-53-6, and a specific surface of 53,2 m^2/g. MONOLITE® Blue 515400 can be used for application in coil, powder, decorative, industrial, and automotive coatings. view less | Request Sample |
VerdeCoat® WB-10 | Mantrose-Haeuser | VerdeCoat® WB-10 is a water, grease and moisture vapor barrier coating for paper, paper board and molded fiber food service packaging applications. It may be applied by rod, roll and flexo gravure coating methods. It can be sprayed using air or airless sy...view more VerdeCoat® WB-10 is a water, grease and moisture vapor barrier coating for paper, paper board and molded fiber food service packaging applications. It may be applied by rod, roll and flexo gravure coating methods. It can be sprayed using air or airless systems. The coated film can be dried in conventional drying systems with hot air or IR equipment. Minimum drying and curing temperature is 125 °C. Drying and curing times will depend on manufacturing line speed and drying process equipment. view less | Request Sample |
New! Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...view more Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. view less | Request Sample |
ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...view more ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
ECA 29 Epoxy Curing Agent | Univar Solutions | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | Request Sample |
Amicure® CG-325G Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. | Request Sample |
D.E.H.™ 81 | Univar Solutions | D.E.H.™ 81 is a phenolic curing agent of intermediate reactivity containing curing catalyst as well as a polyacrylate flow modifier. The intermediate reactivity makes D.E.H.™ 81 particularly suitable as a starting base for product development. | Request Sample |
HPP-E-4024-19-65 | US Polymers - Accurez LLC | HPP-E-4024-19-65 is a water reducible phenolic alkyd designed to undergo air cure. It provides very good corrosion resistance, good gloss and color retention. | Request Sample |
CYMEL® NF 3041 | Allnex | CYMEL® NF-3041 resin is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing this product e...view more CYMEL® NF-3041 resin is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing this product exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility. view less | Request Sample |
R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
Versamid® 100 I-70 | Gabriel Performance Products | Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long ...view more Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. view less | |
Versamid® 100 T-60 | Gabriel Performance Products | Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot liv...view more Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. view less | |
Docure KH-506 | Kukdo Chemical Co., Ltd. | Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures. | |
BECKOPOX™ EH 613w/80WA | Allnex | Beckopox® EH 613W/80WA is a waterborne acetic acid free aliphatic polyamine adduct. It's a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
APR Polyamine | Epoxy Chemicals, Inc. | APR Polyamine is a clear liquid that functions as a fast setting amine curing agent with very low viscosity. This product has high strength and can be used as an AEP replacement. It is often used as an accelerator for other curing agents and in adhesives. | |
SUO-7100F | DKSH | SUO-7100F is an aliphatic urethane acrylate product. It is high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 10 functional aliphatic urethane acrylate. | Request Sample |
SUO-7620 | DKSH | SUO-7620 is an aliphatic urethane acrylate product. It is high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical compositions is 6 functional aliphatic urethane acrylate. | Request Sample |
SUO-7910 | DKSH | SUO-7910 is an aliphatic urethane acrylate product. It is high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 9 functional aliphatic urethane acrylate. | Request Sample |
SUO-H7000 | DKSH | SUO-H7000 is an urethane acrylate product. It is a non yellowing acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional aliphatic urethane acrylate. | Request Sample |
SUO-M2000 | DKSH | SUO-M2000 is a urethane acrylate product. It is a non yellowing acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional aliphatic urethane acrylate. | Request Sample |
MIRAMER M166 | Rahn USA Corp. | MIRAMER M166 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in pressure sensitive adhesives, plastic coatings and metal varnishes. | Request Sample |
SOVERMOL® 1092 | BASF Dispersions & Resins | SOVERMOL 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moistur...view more SOVERMOL 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less | |
Docure KH-831 | Kukdo Chemical Co., Ltd. | Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...view more Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. view less | |
Amicure® IC-221 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...view more Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. view less | Request Sample |
EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...view more EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. view less | Request Sample |
EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...view more EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. view less | Request Sample |
CN2921 | Sartomer Americas | CN2921 is an aliphatic urethane acrylate oligomer developed for UV curable coating and ink applications where adhesion and excellent weathering resistance are required. CN2921 adheres to plastics and polycarbonates and has good flexibility. | |
EBECRYL® 113 | Allnex | EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics. | Request Sample |
LAROMER® PA 9083 | BASF Dispersions & Resins | LAROMER PA 9083 is a methacrylated phosphoric acid ester. Due to the high acid value, this co-binder acts as an excellent adhesion promoter in UV curable coatings, printing inks, and overprint varnishes. | |
Doublecure® CA | Double Bond Chemical Ind., Co., Ltd. | Doublecure® CA is a solid, non-yellowing photoititiator synergist. It provides fast surface curing, outstanding surface hardness, and odorless characteristics. This white to yellowish powder is characterized as a chlorendic ester. | |
Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
SARBIO® 5102 Resin | Sartomer Americas | SARBIO® 5102 Resin is an excellent reactive diluent for oligomers. The chemistry produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
2102C | GIMEL Technical Materials | 2102C is a difunctional aliphatic urethane acrylate used in extension nail gels and UV-curable adhesives. It shows yellowing resistance, excellent toughness and abrasion resistance, and high gloss with very low heat release. | Request Sample |
EBECRYL® 8311 | Allnex | EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemi...view more EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, coatings requiring low development after abrasion resistance, and as a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance. view less | Request Sample |
ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta | Penn Color, Inc. | ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGD...view more ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta uses pigment PR 122 with 20% pigment loading. view less | Request Sample |
ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet | Penn Color, Inc. | ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA...view more ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet uses pigment PV 23 with 20% pigment loading. view less | Request Sample |
SpeedCure KEM | Sartomer Americas | SpeedCure KEM is photoinitiator emulsion with absorption maxima at 260 nm, 290 nm and 370nm. SpeedCure KEM provides high reactivity when used at 2-10 wt% in waterbased UV and LED curable formulations. | |
Oligomer SM 6103B | Jiangsu Sanmu Group Corporation | Oligomer SM 6103B is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, OPV's and flexo and offset inks. | |
Oligomer SM 6109D | Jiangsu Sanmu Group Corporation | Oligomer SM 6109D is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, OPV's and flexo and offset inks. | |
POLYCAT® SA 1 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
7322 | GIMEL Technical Materials | 7322 is a difunctional modified epoxy acrylate used in nail color gels, UV adhesives, paints, and inks. It has low color and odor with good flexibility and pigment-wetting. It shows a fast curing response and good surface dry. | Request Sample |
BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
SUO-1500E | DKSH | SUO-1500E is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 15 functional aliphatic urethane acrylate. | Request Sample |
SUO-1500T | DKSH | SUO-1500T is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 15 functional aliphatic urethane acrylate. | Request Sample |
SUO-7100LC | DKSH | SUO-7100LC is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 10 functional aliphatic urethane acrylate. | Request Sample |
SUO-7100LV | DKSH | SUO-7100LV is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 10 functional aliphatic urethane acrylate. | Request Sample |
SUO-7100M | DKSH | SUO-7100M is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 10 functional aliphatic urethane acrylate. | Request Sample |
SUO-7620TF | DKSH | SUO-7620TF is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 6 functional aliphatic urethane acrylate. | Request Sample |
SUO-7630 | DKSH | SUO-7630 is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 6 functional aliphatic urethane acrylate. | Request Sample |
SUO-7640 | DKSH | SUO-7640 is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 6 functional aliphatic urethane acrylate. | Request Sample |
SUO-7650 | DKSH | SUO-7650 is an aliphatic urethane acrylate product. It is a high hardness acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV). Its chemical composition is 6 functional aliphatic urethane acrylate. | Request Sample |
SUO-9103I20 | DKSH | SUO-9103I20 is a urethane acrylate product. It is a non yellowing acrylate oligomer which provides cure response when exposed to ultraviolet light (UV). Its chemical composition is di-functional aliphatic urethane acrylate/ IBOA 20%. | Request Sample |