| DOWSIL™ 8526 Additive | Dow Performance Silicones | DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. view less | |
| SpeedCure KEM | Sartomer Americas | SpeedCure KEM is photoinitiator emulsion with absorption maxima at 260 nm, 290 nm and 370nm. SpeedCure KEM provides high reactivity when used at 2-10 wt% in waterbased UV and LED curable formulations. | |
| EFKA® PX 4701 | BASF Formulation Additives | EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-perform...view more EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-performance systems such as inkjet inks, UV- curable and water-based flexographic inks. view less | |
| ORDISOL SWT-33 | Concentrol, S.A., Productos | ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV ...view more ORDISOL SWT-33 is a silicone additive for printing inks, overprint varnishes and for adhesive and coating systems, solvent based, solvent free and aqueous. It is highly effective at very low concentrations, generally in the range of 0.01% - 0.3% by weight over the total formulation. Its dosage can be increased to values of 1% in aqueous and UV curing systems. In all the previous applications offers a strong decrease of the surface tension. view less | |
| SpeedCure TEM | Sartomer Americas | SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED cura...view more SpeedCure TEM is a stable photoinitiator emulsion with absorption maxima at 260 nm and 370nm. SpeedCure TEM provides high reactivity, improved cured film properties and enhanced formulation compatibility when used at 2-10 wt% in waterbased UV and LED curable formulations. view less | |
| Siltech®C-1910 | Siltech Corp. | Siltech®C-1910 is a liquid fluorinated silicone polyether. The fluoro pendant moiety gives slip and foam control in radiation curing, UV curing, and water-based inks and coatings. | |
| OMNISTAB® UV 1130 | Partners in Chemicals | OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-base...view more OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-based coatings including UV-curable systems. view less | |
| Doublecure® 73W | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. ...view more Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. It is the first water solute able initiator to be used for non-yellowing clear coating. And because it is in liquid type and has good solvency properties, it is easier to handle and formulate. This yellowish to brown clear liquid is used to initiate polymerization of systems based on unsaturated acrylic monomers as reactive diluents. view less | |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...view more Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. view less | Request Sample |
| BYK®-UV 3500 | BYK | BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable...view more BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable systems BYK-UV 3500 gives excellent surface slip and tape release with permanent effect due to crosslinking by acryl functionality, as well as improved leveling. view less | Request Sample |
| Waterborne Epoxy Curing Agent SM6080 | Jiangsu Sanmu Group Corporation | SM6080 is an environmentally friendly and low viscosity aliphatic amine modified water-based epoxy curing agent. It has good toughness, good adhesion, low construction smell, good fullness and good water resistance, widely used in epoxy floor fields. | |
| Urethane Acrylate Dispersion SW 5200 | Soltech Ltd | Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, ...view more Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, scratch resistance, wetting properties, and fast curing. Urethane Acrylate Dispersion SW 5200 has a slightly colloidal and milky appearance with a viscosity of <300 at 25℃. view less | |
| BYK-3560 | BYK | BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enable...view more BYK-3560 is a silicone-free and fluorine-free surface additive for increasing the surface energy in aqueous, solvent-borne, UV-curable, and high-solid systems. It increases the surface energy of cured coatings overall, especially the polarity. This enables the improved adhesion of subsequent layers such as paint, laminating foils, adhesives, and printing inks. The cured coating is also wetted more effectively, producing an excellent leveling of the subsequent coating. In addition, BYK-3560 also improves the leveling of the system in which it is being used. view less | Request Sample |
| K-CURE® 1040W | King Industries, Inc. | K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...view more K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. view less | |
| FOAMSTAR® SI 2210 NC | BASF Formulation Additives | FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not se...view more FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not separate out from the paint and has a good long-term efficiency. Aqueous wood coatings and overprint varnishes based on acrylic polymers are the preferential fields of application, but the defoamer is also suitable for contact adhesives. view less | |
| Chisorb® 292 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable...view more Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable acrylic. view less | |
| Epilink™ 360 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...view more Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. view less | Request Sample |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...view more Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. view less | |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...view more EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. view less | Request Sample |
| EFKA® SL 3210 | BASF Formulation Additives | EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV ...view more EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV flexographic printing. view less | |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| Chisorb® 582L | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 582L is a reactable liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This product is suitable for the following coating applications: automotive coatings, UV coatings, wood strains or DIY paints and UV/EB coatings. As it is builds the polymer bond, it provides long term stability for coatings based on an acrylic and rubber matrix such as thermoplastic acrylics, thermosetting acrylics, and unsaturated polyesters, water-borne acrylics, vinylics, UV curable...view more Chisorb® 582L is a reactable liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This product is suitable for the following coating applications: automotive coatings, UV coatings, wood strains or DIY paints and UV/EB coatings. As it is builds the polymer bond, it provides long term stability for coatings based on an acrylic and rubber matrix such as thermoplastic acrylics, thermosetting acrylics, and unsaturated polyesters, water-borne acrylics, vinylics, UV curable acrylic, and rubber. view less | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a d...view more Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable formulations for clear or pigmented coatings on wood, metal, plastic, paper as well as for printing inks. In addition, it allows curing of thick sections due to the outstanding absorption. view less | |
| HALOX® RC-980 | ICL Phosphate Specialty | HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne...view more HALOX® RC-980 by ICL is a novel organic additive designed to convert red rust to black iron oxide. It works within minutes on coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It is suitable for medium oil alkyds, cationic 1K epoxies, and cationic 1K acrylics. It can be used in slightly acidic waterborne vinyl or PVDC binders applied to rusted steel substrates. It shows a stable freeze cycle. It does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid. The dosage level is 3-6% for water-based coatings and 7-10% for solvent-based coatings as supplied on total formula weight. The shelf life of HALOX® RC-980 is 1 year. view less | Request Sample |
| Anquamine® 401 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. An...view more Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. Anquamine® 401 curing agent can also be utilized with different types of epoxy resin depending upon the properties desired. view less | Request Sample |
| BYK®-UV 3530 | BYK | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | Request Sample |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...view more Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. view less | |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...view more Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. view less | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne...view more EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. view less | Request Sample |
| 2036W | GIMEL Technical Materials | 2036W is a hexa functional waterborne aliphatic urethane acrylate used in waterborne coatings. It shows fast curing response, good gloss and film build, and high hardness and abrasion resistance. | |
| Ancamine® 2759 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...view more Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. view less | Request Sample |
| Docure KH-721 | Kukdo Chemical Co., Ltd. | Docure KH-721 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-721 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...view more Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| BYK-UV 3535 | BYK | BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many...view more BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV reactive and displays crosslinking with radiation curable systems. For this reason its effect is long lasting and it does not migrate. BYK-UV 3535 is suitable for solvent-free, solvent-borne, and aqueous, radiation curable systems. view less | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...view more Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. view less | Request Sample |
| Epotec® THW 4501 | Aditya Birla | Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveli...view more Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveling and trowelable flooring applications. view less | |
| Telalit 180 | Spolchemie | Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispers...view more Telalit 180 is a transparent yellow-brown amine hardener for epoxy resin systems. This product is a modified aqueous epoxy solution with mixture of amine with medium viscosity. Telalit 180 is primarily used as a curing additive in waterborne epoxy dispersion. view less | |
| A-Cat 0040 | FTC Korea Co.,Ltd | A-Cat 0040 has excellent stability in solvent soluble and water-based thermosetting system, low temperature cure, and a fast cure time. It is used in general industries coatings. | Request Sample |
| Anquamine® 735 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...view more Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. view less | Request Sample |
| Anquamine® 731 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...view more Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. view less | Request Sample |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...view more Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. view less | Request Sample |
| Doublecure® 3959 | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white p...view more Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation on substrates of wood, metal, plastic and paper. view less | |
| Docure KH-748 | Kukdo Chemical Co., Ltd. | Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, ...view more Docure KH-748 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-748 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| Anquamine® 100 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curi...view more Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curing agent provides 6-8 hours pot life with liquid epoxy resins and addresses the typically short pot life of 1-2 hours from current two component, water-based systems. view less | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| BYK®-UV 3510 | BYK | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | Request Sample |
| NACURE® 8924 | King Industries, Inc. | NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is solu...view more NACURE® 8924 is an amine blocked sulfonic acid stimulant that is diluted with water for easier incorporation into water based systems. It appears as a clear, straw liquid, and has good cure response along with solubility in water-based systems. It is soluble in alcohols, glycols, glycol ethers, water and is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. This is a product that is normally applied in water-based coatings, wood coatings, and general industrials. view less | |
| Anquamine® 721 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....view more Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. view less | Request Sample |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| NACURE® 2547 | King Industries, Inc. | NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and...view more NACURE® 2547 appears as a clear, transparent liquid and is an amine blocked para -Toluenesulfonic acid (p-TSA) stimulant that is diluted with water for easier incorporation into water-based systems. It offers good cure response and viscosity stability and is usually applied in water-based general industrials. This product is soluble in alcohols, glycols, water, glycol ethers and it is insoluble in ketones, esters, aromatic and aliphatic hydrocarbons. view less | |
| CARBODILITE™ SV-02 | GSI Exim America, Inc. | CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion,...view more CARBODILITE™ SV-02 is a crosslinking agent characterized by its higher functionality and curing at lower temperatures. This grade has a pH of 8-11, and it crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. view less | |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...view more EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). view less | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| Borchers® AF 0871 | Borchers, A Company of OMG | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Siltech® C-468 | Siltech Corp. | Siltech® C-468 is a 100% active carbinol functional polyether siloxane copolymer that is primarily used to improve flow and slip as well as providing anti-cratering and anti-blocking benefits. Siltech®C-468 is used in solvent-based, water-based and energy...view more Siltech® C-468 is a 100% active carbinol functional polyether siloxane copolymer that is primarily used to improve flow and slip as well as providing anti-cratering and anti-blocking benefits. Siltech®C-468 is used in solvent-based, water-based and energy curing coatings and ink formulations. view less | |
| BRB Siloen® WA 265 | BRB International BV | BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...view more BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. view less | |
| RHEOBYK-T 1010 VF | BYK | RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as...view more RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as well as PU and alkyd emulsions. It is also well suited for aqueous wood and furniture coatings based on PU, acrylics and UV-curing systems. view less | Request Sample |
| CYMEL® 328 | Allnex | CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such a...view more CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications. view less | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne...view more CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less | Request Sample |
| RA-130W Release Coat | Mayzo, Inc. | RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and ...view more RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and coatings. view less | |
| NACURE® 2500 | King Industries, Inc. | NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne o...view more NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) stimulant that appears as a clear, straw liquid and is made for low temperature curing and maximum viscosity stability. It offers good cure response, exterior durability, and waterborne or high solids coatings. This product is soluble in alcohols, glycol ethers, glycols, and water, partially soluble in ketones, and insoluble in aliphatic and aromatic hydrocarbons. It can be applied in general industrials, appliance finishes, automotive topcoats, and coil coatings. view less | |
| Siltech® C-241 | Siltech Corp. | Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking ...view more Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking and flow. Siltech®C-241 prevents pigment flotation and provides mar resistance. view less | |
| Epotec® THW 4502 | Aditya Birla | Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & seale...view more Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & sealers for concrete floors, and general purpose maintenance coatings. view less | |
| Epotec® THW 4504 | Aditya Birla | Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for sel...view more Epotec® THW 4504 is a water-based epoxy curing agent featuring excellent strength, water vapor permeability, and adhesion to damp surfaces, as well as VOC-free formulation capability. This product is ideal for use in coatings, primers, and sealers for self-leveling, trowelable, and concrete floors. view less | |
| BYK-UV 3575 | BYK | BYK-UV 3575 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling. It displays a moderate reduction in surface tension and improves substrate wetting. The surface slip is increased and leveling is i...view more BYK-UV 3575 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling. It displays a moderate reduction in surface tension and improves substrate wetting. The surface slip is increased and leveling is improved. As a result of its multiple acrylic functionality, BYK-UV 3575 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability must be tested, surface sanding is recommended. The product is very compatible and causes no haze in the coating system. BYK-UV 3575 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...view more Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. view less | Request Sample |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...view more EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. view less | Request Sample |
| Epotec® THW 4503 | Aditya Birla | Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primer...view more Epotec® THW 4503 is a water-based, solvent-free epoxy curing agent featuring good hardness and compressive strength development, excellent adhesion, and zero voc formulation capability. This product is ideal for use in trowelable floor coatings and primers & sealers for concrete walls and floors. view less | |
| TINUVIN® 5333-DW (N) | BASF Dispersions & Resins | TINUVIN 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of e...view more TINUVIN 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of exterior water-based industrial and architectural coatings including energy curable systems (UV, electron beam). This product is a slightly yellow dispersion. view less | |
| NACURE® 155 | King Industries, Inc. | NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers with melamine and urea-formaldehyde crosslinking agents. Common applications include waterborne...view more NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers with melamine and urea-formaldehyde crosslinking agents. Common applications include waterborne can coatings, automotive primers, printing inks, electrocoatings, coil coatings, and appliance finishes. view less | |
| SYLOID® 7000 Matting Agent | GRACE | SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and sol...view more SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and solventborne furniture coatings; DIY wood finishes; natural and artificial leather coatings; coatings for automotive plastic parts; coatings for foils and laminates; and UV curable coatings. view less | |
| SYLOID® 7000 Matting Agent | Univar Solutions | SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and sol...view more SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and solventborne furniture coatings; DIY wood finishes; natural and artificial leather coatings; coatings for automotive plastic parts; coatings for foils and laminates; and UV curable coatings. view less | Request Sample |
| NACURE® X49-110 | King Industries, Inc. | NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcoh...view more NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcohol, water, glycols, and glycol ethers. It can be applied to automotive primers, general industrials, water based can and coil coatings, electrostatic spray coatings, and electrocoat. view less | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne...view more DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less | |
| Telalit 1040 | Spolchemie | Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-base...view more Telalit 1040 is an amine hardener for epoxy resin systems. This product is a hardener that is modified from a mixture of primary poly-etherpolyamines. This hardener does not contain nonyl-phenol. Telalit 1040 is primarily used as a hardener for water-based systems and in high-solid coatings. view less | |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HYDROPALAT® WE 3220 | BASF Formulation Additives | HYDROPALAT® WE 3220 is a silicone surfactant to improve substrate wetting in aqueous systems. It shows strong reduction of surface tension in water based systems. Therefore it is highly suitable to improve substrate wetting and to prevent surface defects. It is recommended as an anti-crater additive with good recoatability. Furthermore HYDROPALAT® WE 3220 can be used in UV-curable...view more HYDROPALAT® WE 3220 is a silicone surfactant to improve substrate wetting in aqueous systems. It shows strong reduction of surface tension in water based systems. Therefore it is highly suitable to improve substrate wetting and to prevent surface defects. It is recommended as an anti-crater additive with good recoatability. Furthermore HYDROPALAT® WE 3220 can be used in UV-curable formulations to improve flow and leveling. view less | |
| HYDROPALAT® WE 3221 | BASF Formulation Additives | HYDROPALAT® WE 3221 is a silicone surfactant to improve substrate wetting in aqueous systems. It shows strong reduction of surface tension in water based systems. Therefore it is highly suitable to improve substrate wetting and to prevent surface defects. It is recommended as an anti-crater additive with good recoatability. Furthermore HYDROPALAT® WE 3221 can be used in UV-curable...view more HYDROPALAT® WE 3221 is a silicone surfactant to improve substrate wetting in aqueous systems. It shows strong reduction of surface tension in water based systems. Therefore it is highly suitable to improve substrate wetting and to prevent surface defects. It is recommended as an anti-crater additive with good recoatability. Furthermore HYDROPALAT® WE 3221 can be used in UV-curable formulations to improve flow and leveling. view less | |
| BYK-UV 3576 | BYK | BYK-UV 3576 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling without foam stabilization. It displays a low to moderate reduction in surface tension and improves substrate wetting. The surface s...view more BYK-UV 3576 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling without foam stabilization. It displays a low to moderate reduction in surface tension and improves substrate wetting. The surface slip is not increased, or only slightly, and leveling is improved. The product does not cause foam to be stabilized; in some systems a defoaming effect is noticed. As a result of its multiple acrylic functionality BYK-UV 3576 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability is good in most systems, however this must be checked. The product is very compatible and causes no haze in the coating system. BYK-UV 3576 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC). | Request Sample |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...view more Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. view less | |
| BASONAT® HW 2100 | BASF Dispersions & Resins | BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-f...view more BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-friendly and durable high-performance 2K PU industrial coatings. view less | |
| DOWSIL™ 27 Additive | Dow Performance Silicones | DOWSIL™ 27 Additive is a nonreactive silicone glycol surfactant with both silicone and organic characteristics. It is supplied as a 100% active fluid. This product may be incorporated into solvent, aqueous, solventless and energy curable systems. | |
| E-SPERSES™ RX-40 | Ethox Chemicals | E-SPERSES™ RX-40 is a emulsifier designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and anion for...view more E-SPERSES™ RX-40 is a emulsifier designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and anion forms. The products are designed to produce excellent emulsions of alkyd resins while containing functionality that allow the emulsifier to react into the curing process of the alkyd film. This is patent pending technology. view less | |
| E-SPERSES™ RX-48 | Ethox Chemicals | E-SPERSES™ RX-48 is a waxy solid designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and anion for...view more E-SPERSES™ RX-48 is a waxy solid designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and anion forms. The products are designed to produce excellent emulsions of alkyd resins while containing functionality that allow the emulsifier to react into the curing process of the alkyd film. This is patent pending technology. view less | |
| E-SPERSES™ RX-52 | Ethox Chemicals | E-SPERSES™ RX-52 is a anionic waxy solid designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and a...view more E-SPERSES™ RX-52 is a anionic waxy solid designed for waterborne alkyd applications. The E-Sperse RX products are a series of nonionic and anionic emulsifiers especially designed for waterborne alkyd applications. They are available in both nonionic and anion forms. The products are designed to produce excellent emulsions of alkyd resins while containing functionality that allow the emulsifier to react into the curing process of the alkyd film. This is patent pending technology. view less | |
| REAXIS® C333W50 | Reaxis Inc. | REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied a...view more REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied as a 50% active catalyst in water and can be supplied in other diluents. view less | |
| BYK-UV 3505 | BYK | BYK-UV 3505 is a crosslinkable surface additive for radiation curable systems for improving wetting, scratch resistance, and easy-to-clean properties. Even at a low dosage BYK-UV 3505 displays a strong reduction in surface tension and improves substrate ...view more BYK-UV 3505 is a crosslinkable surface additive for radiation curable systems for improving wetting, scratch resistance, and easy-to-clean properties. Even at a low dosage BYK-UV 3505 displays a strong reduction in surface tension and improves substrate wetting, even of difficult substrates. Surface slip is significantly increased even at low dosage. This leads, among other things, to an improvement in scratch resistance and the easy-to-clean properties. As a result of its multiple acrylic functionality, BYK-UV 3505 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability must be tested, surface sanding is recommended. The product is very compatible and causes no haze in the coating system. BYK-UV 3505 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| B616 | Tianyi Chemical Engineering Material Co., Ltd. | B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B616, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| B618 | Tianyi Chemical Engineering Material Co., Ltd. | B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B618, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| B520 | Tianyi Chemical Engineering Material Co., Ltd. | B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aque...view more B520, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 5.5 and 7.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| UV708 | Tianyi Chemical Engineering Material Co., Ltd. | UV708, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 3.5 and 6.0 in a 5% aqu...view more UV708, in the form of a dry, white, micronized powder, is a UV-curing matting agent that can be used in coating applications. This product has porosity, a high specific surface area, and an amorphous form. Its pH value is between 3.5 and 6.0 in a 5% aqueous solution. This product is compatible with a number of different resins. view less | |
| EPOTUF® 37-680 | Polynt Composites | EPOTUF® 37-680 is an amine-functional dispersion of a waterborne epoxy curing agent that can be used in concrete sealers, primers, and topcoats, factory equipment coatings, and industrial maintenance coatings, among other applications. This product resist...view more EPOTUF® 37-680 is an amine-functional dispersion of a waterborne epoxy curing agent that can be used in concrete sealers, primers, and topcoats, factory equipment coatings, and industrial maintenance coatings, among other applications. This product resists corrosion, chemicals, and yellowing. It has low odor and cleans up easily. view less | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...view more Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. view less | |
| BECKOPOX™ VEH 2188w/55WA | Allnex | Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines. | Request Sample |
| GENOCURE* DEAP | Rahn USA Corp. | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...view more GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. view less | Request Sample |
| DOWSIL™ 67 Additive | Dow Performance Silicones | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 67 Additive | Univar Solutions | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 500W Additive | Dow Performance Silicones | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 500W Additive | Univar Solutions | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 501W Additive | Dow Performance Silicones | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Univar Solutions | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
