| TEGO® Flow 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 300 compatible flow and leveling additive. It is a clear liquid solution of a polyacrylate. It has good flow promotion in clear coat, pigmented, and solventborne systems. TEGO® Flow 300's flow promotion does not affect surface energy nor surfa...view more TEGO® Flow 300 compatible flow and leveling additive. It is a clear liquid solution of a polyacrylate. It has good flow promotion in clear coat, pigmented, and solventborne systems. TEGO® Flow 300's flow promotion does not affect surface energy nor surface slip. It is used as the primer/basecoat and topcoat for lacquer coats. It has clear solubility in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). view less | Request Sample |
| Lanco™ Flow U | Lubrizol Advanced Materials, Inc. | Lanco™ Flow U is a flow and leveling agent that eliminates surface defects such as craters, pinholes and orange peel. Based on acrylic chemistry, Lanco™ Flow U is solvent-free and, therefore, is suitable for a wide range of applications. Typical applicati...view more Lanco™ Flow U is a flow and leveling agent that eliminates surface defects such as craters, pinholes and orange peel. Based on acrylic chemistry, Lanco™ Flow U is solvent-free and, therefore, is suitable for a wide range of applications. Typical applications for Lanco™ Flow U are coil coatings and can coatings. view less | |
| CRAYVALLAC® FLOW-200 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film format...view more CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. view less | Request Sample |
| CRAYVALLAC® FLOW-450 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-45...view more CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-450 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® FLOW-450 can furthermore successfully substitute classical defoamers within a formulation, demonstrating combined performance in terms of leveling and defoaming. CRAYVALLAC® FLOW-450 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-450 in the mill-base in order to get maximum efficiency in terms of air release properties. view less | Request Sample |
| CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...view more CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. view less | Request Sample |
| CRAYVALLAC® FLOW-465 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-46...view more CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-465 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-465 in the mill-base in order to get maximum efficiency in terms of air release properties. view less | Request Sample |
| CRAYVALLAC® FLOW-400 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is...view more CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® Flow-400 is soluble in many solvents such as ketones, aromatics, mineral spirits, esters, glycol ethers and chlorinated hydrocarbons. CRAYVALLAC® Flow-400 is easily incorporated into formulations due to its wide compatibility and good solubility in most solvents. In Powder coatings, it is recommended to introduce the CRAYVALLAC® Flow-400 by hot blend or even dry blend. The method of incorporating CRAYVALLAC® Flow-400 into coating formulation does not affect the performance of the coating as long as it is uniformly dispersed in the system. This can be achieved by thoroughly mixing it with the other paint ingredients or by master batching the product in a base resin. view less | Request Sample |
| TEGO® Flow 370 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 370 is a silicone-free acrylic leveling agent and shows excellent compability and flow promotion with additional defoaming properties. It is highly recommended for solventborne coatings especially for clear coatings. | Request Sample |
| TEGO® Flow 425 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 425 is a highly compatible flow and leveling additive with weak glide effect. It is a clear liquid which becomes hazy and thickens at temperatures below 18 °C. It returns to clear and becomes pourable after warming. This does not affect the per...view more TEGO® Flow 425 is a highly compatible flow and leveling additive with weak glide effect. It is a clear liquid which becomes hazy and thickens at temperatures below 18 °C. It returns to clear and becomes pourable after warming. This does not affect the performance properties of the product. TEGO® Flow 425 is universally applicable and recoatable for flow promotion of clear coat, pigmented, radiation-curing, solventborne systems.. view less | Request Sample |
| TEGO® Flow 380 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 380 is a silicone-free acrylic leveling agent and shows good compatibility and flow promotion with additional anti-popping properties. It is highly recommended for solvent-borne coatings, especially clear coatings. | Request Sample |
| TEGO® Flow 375 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's s...view more TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's surface energy or slip. It is used as the primer/basecoat and as the topcoat for lacquer coats, and is soluble in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA). view less | Request Sample |
| Eracoat Flow Additive | Era Polymers | Eracoat Flow Additive is a surface tension modifier in the form of a clear liquid. It is an additive for coatings designed to minimize the rejection problems normally caused by wax, oil, and other common household contaminants. Eracoat Flow Additive is su...view more Eracoat Flow Additive is a surface tension modifier in the form of a clear liquid. It is an additive for coatings designed to minimize the rejection problems normally caused by wax, oil, and other common household contaminants. Eracoat Flow Additive is suitable for the products Eracoat MDI 45 Gloss, Eracoat 45 Gloss, and Eracoat MDI High Build Sealer. It is not suitable for external or wet applications and can be used for interior flooring, particleboard, and cork flooring. view less | |
| Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
| Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
| TEGO® Flow ATF 2 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow ATF 2 shows highly effective anti-crater properties for solventborne coatings. It ensures wetting even on insufficiently cleaned or contaminated substrates. | Request Sample |
| Luna-flow C-85 | DKSH | Luna-flow C-85 is a castor oil derivative, which is used to significantly reduce the melt viscosity and increase the open time of powder coatings during the molten stage of the curing process. This product is available in Europe, Asia and North America. | Request Sample |
| Gasil® IJ624 | PQ Corporation | Gasil® IJ624 is a specialty silica gel used for anti-cake (free-flow) and carrying in food and pharmaceuticals. It gives benefits such as, carrier for flavors, fragrances, and active ingredients, is an anti-caking (free-flow) agent for food / pharmaceutic...view more Gasil® IJ624 is a specialty silica gel used for anti-cake (free-flow) and carrying in food and pharmaceuticals. It gives benefits such as, carrier for flavors, fragrances, and active ingredients, is an anti-caking (free-flow) agent for food / pharmaceutical materials with poor flow properties. view less | |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| MODAFLOW® 9200 | Allnex | Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion. | Request Sample |
| MODAFLOW® 2100 | Allnex | Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. | Request Sample |
| MODAFLOW® Lambda | Allnex | MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. I...view more MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulations and outperforms surface characteristics such as gloss, DOI, sharpness and brilliancy, and anti orange-peel effect. view less | Request Sample |
| MODAFLOW® AQ 3000 | Allnex | MODAFLOW® AQ 3000 -flow/leveling/levelling- is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
| MODAFLOW® EPSILON | Allnex | Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and...view more Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. view less | Request Sample |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...view more CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...view more CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| Raybo 77 AlGel | Raybo Chemical | Raybo 77 AlGel is an ink additive . This product is most commonly used to form stable aluminum octoate gels in petroleum-based ink applications. Aluminum octoate gels made with RAYBO 77 have more initial flow plus the flow and viscosity are stable and r...view more Raybo 77 AlGel is an ink additive . This product is most commonly used to form stable aluminum octoate gels in petroleum-based ink applications. Aluminum octoate gels made with RAYBO 77 have more initial flow plus the flow and viscosity are stable and remain so on aging. view less | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...view more CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...view more CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...view more CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...view more Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. view less | |
| Dynoadd® F-106 | Dynoadd by Dynea | Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining exce...view more Dynoadd® F-106 is a non-silicone, flow and levelling additive for solvent based automotive clear coat formulations. Surface defects such as orange peel, craters and popping are eliminated. Dynoadd® F-106 improves flow and levelling whilst maintaining excellent clarity. Dynoadd® F-106 has applications as a automotive OEM clear coat. view less | Request Sample |
| Resiflow® L-64F MBP-10 | Estron Chemical, Inc. | Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into t...view more Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the polyester resin and thus is very easily incorporated into the final formulation. This product has been designed for a balance of optimal flow and clarity in PE-TGIC, PE-PT910 and PE-Primid clearcoat formulations. view less | |
| Resiflow® LV MBP-10 | Estron Chemical, Inc. | Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder ...view more Resiflow® LV MBP-10 is a 10% flow control masterbatch of Resiflow® LV in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. This product is in flake form and has been designed for optimal flow and leveling in PETGIC, PE-PT910 and PE-Primid powder coating formulations. view less | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...view more CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. view less | |
| ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...view more ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. view less | Request Sample |
| COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER | Momentive | COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of i...view more COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of image (DOI) of the clearcoat is typically excellent, compared to current commercial additives used in the fomulations discussed. view less | |
| TEGO® Rad 2100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2100 is a clear liquid silicone acrylate, radiation-curing substrate wetting and flow additive. It is a radically crosslinkable flow and wetting additive, highly compatible, recoatable and glueable. It is highly suitable for flow promotion and ...view more TEGO® Rad 2100 is a clear liquid silicone acrylate, radiation-curing substrate wetting and flow additive. It is a radically crosslinkable flow and wetting additive, highly compatible, recoatable and glueable. It is highly suitable for flow promotion and is overprintable. TEGO® Rad 2100 can be used in both the primer/basecoat and the topcoat for paints and lacquers. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2100. view less | Request Sample |
| Troysol™ S367 | Arxada – Troy Corporation | Troysol™ S367 is recommended for resin systems that generally exhibit inadequate flow properties, and for finishing applications where inadequate substrate preparation is encountered.Troysol™ S367 improves flow properties of poorly wetting vehicles and el...view more Troysol™ S367 is recommended for resin systems that generally exhibit inadequate flow properties, and for finishing applications where inadequate substrate preparation is encountered.Troysol™ S367 improves flow properties of poorly wetting vehicles and eliminates film imperfections caused by insufficiently cleaned substrates, difficult to wet substrates, or substrates contaminated by silicone or oil. view less | Request Sample |
| Borchi® Gol 0011 | Borchers, A Company of OMG | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...view more Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. view less | |
| Resiflow® L-65F MBH-2 | Estron Chemical, Inc. | Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in pol...view more Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in polyester-urethane clearcoat formulations. view less | |
| Resiflow® L-66F MBP-10 | Estron Chemical, Inc. | Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clari...view more Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clarity in PE-TGIC clearcoat formulations. view less | |
| COATOSIL* 7001 | Momentive | Coatosil 7001 copolymer is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. | |
| TEGO® Wet 290 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 290 shows excellent wetting and anti-crater properties with flow promotion in waterborne coatings. | Request Sample |
| TEGO® Wet 296 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 296 shows excellent wetting and anti-crater properties with flow promotion in waterborne coatings. | Request Sample |
| ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formula...view more ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. view less | Request Sample |
| MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. T...view more Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. view less | Request Sample |
| TROYSOL™ UGA | Arxada – Troy Corporation | TROYSOL™ UGA is a multipurpose, silicone-free wetting additive that promotes improved color uniformity, flow and leveling, gloss and substrate wetting in aqueous and water reducible coatings. By stabilizing surface tension gradients upon application and c...view more TROYSOL™ UGA is a multipurpose, silicone-free wetting additive that promotes improved color uniformity, flow and leveling, gloss and substrate wetting in aqueous and water reducible coatings. By stabilizing surface tension gradients upon application and cure, also enhances gloss, flow and leveling and substrate wedding resulting in improved appearance and uniform film coverage. view less | Request Sample |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...view more Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. view less | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. Due to its special organic modification, CLAYTONE-40 is ideally suited to influencing th...view more CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. Due to its special organic modification, CLAYTONE-40 is ideally suited to influencing the flow behavior of non- polar to medium-polar coating systems. Using the additive creates thixotropic flow behavior, and therefore results in a significant improvement of the anti-sagging properties while at the same time maintaining good leveling. The storage stability is also improved, and the settling of pigments and fillers is prevented. view less | Request Sample |
| CLAYTONE®-VZ | BYK | CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally ...view more CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. Using the additive produces thixotropic flow behavior, and therefore results in significant improvement to the anti-sagging properties while at the same time maintaining good leveling. This also optimizes storage stability, and prevents pigments and fillers from settling. view less | Request Sample |
| CLAYTONE-APA | BYK | CLAYTONE-APA is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. Using the additive produces thixotropic flow behavior, and therefore results in significant improvements to the anti-sagging properties while at t...view more CLAYTONE-APA is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. Using the additive produces thixotropic flow behavior, and therefore results in significant improvements to the anti-sagging properties while at the same time maintaining good leveling. This also optimizes storage stability, and prevents pigments and fillers from settling. view less | Request Sample |
| RHEOVIS® PU 1341 | BASF Formulation Additives | RHEOVIS® PU 1341 is an excellent low VOC high-shear thickener with low odor, and imparts excellent flow. | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | Request Sample |
| RHEOBYK-D 410 | BYK | RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure....view more RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow behavior is highly suited for preventing sedimentation and increasing the anti-sagging properties without impairing leveling. view less | Request Sample |
| Siltech® C-101 | Siltech Corp. | Siltech® C-101 is a water-soluble silicone glycol copolymer with carbinol functionality. Its primary uses are to reduce surface tension, enhancing flow-out, leveling and wetting. Siltech® C-101 can be added into water-based, solvent based, high solids and...view more Siltech® C-101 is a water-soluble silicone glycol copolymer with carbinol functionality. Its primary uses are to reduce surface tension, enhancing flow-out, leveling and wetting. Siltech® C-101 can be added into water-based, solvent based, high solids and solventless organic paints, inks and coatings. It reduces surface tension, improves wetting, flow-out, mar resistance, leveling, gloss and prevents blocking. view less | |
| PAT-ADD LE 1477 | Patcham USA | PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: o...view more PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: optimal film appearance, highly effective surface tension reducer, prevents cratering, pin-holing, orange peel; optimal flow and leveling on low surface energy substrates, air release without impact on recoat. view less | Request Sample |
| XOANONS® WE-D5432 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. ...view more XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. view less | |
| ADDITOL® VXL 4930 N | Allnex | ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. | Request Sample |
| RHEOBYK-7610 | BYK | RHEOBYK-7610 is a VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior. | Request Sample |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| TEGO® Glide 130 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 130 is a highly compatible slip and flow additive. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 130 is universally applicable with good compatibility. It has good flow promotion and anti-crater effect. this product may be add...view more TEGO® Glide 130 is a highly compatible slip and flow additive. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 130 is universally applicable with good compatibility. It has good flow promotion and anti-crater effect. this product may be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Glide 130. view less | Request Sample |
| RHEOBYK-7600 | BYK | RHEOBYK-7600 is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems, to generate a highly pseudoplastic flow behavior. | Request Sample |
| TEGO® Wet 236 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 236 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterborne coatings and inks. | Request Sample |
| TEGO® Wet 238 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 238 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterborne coatings and inks. | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | Request Sample |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| Aquaflow™ NHS-310 | Ashland | Aquaflow™ NHS-310 is a nonionic associative polymer that provides superior flow and leveling and high ICI viscosity in waterborne paints and coatings. | |
| RHEOBYK-7410 ET | BYK | RHEOBYK-7410 ET is a liquid rheology additive to generate highly thixotropic flow behavior for medium-polarity solvent-borne and solvent-free systems. | Request Sample |
| XOANONS® WE-D5450 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5450 is a polyether siloxane copolymer slip and flow additive. It provides stronger reduction of surface tension, promotes flow, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coat...view more XOANONS® WE-D5450 is a polyether siloxane copolymer slip and flow additive. It provides stronger reduction of surface tension, promotes flow, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering and defoaming properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. view less | |
| MULTIFLOW® Resin | Allnex | Multiflow® Resin is a low viscosity flow modifier for non-aqueous industrial coatings. It is used for high quality industrial finishes and multiflow resins. | Request Sample |
| RHEOBYK-7410 CA | BYK | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | Request Sample |
| TEGO® Rad 2330 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application. | Request Sample |
| PAT-ADD LE 1019 | Patcham USA | PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solven...view more PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solvent-free systems. Main benefits are: broad range compatibility, highly effective slip, leveling, and mar resistance additive, provides optimal flow and leveling, and soluble in water, methanol, iso-propanol, and xylene. Limited solubility in mineral spirits. view less | Request Sample |
| ADDITOL® XL 122 | Allnex | ADDITOL® XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. | Request Sample |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...view more FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. view less | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| CLAYTONE-AF | BYK | CLAYTONE-AF is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polarity systems to generate thixotropic flow behavior. | Request Sample |
| Gasil® GM2 | PQ Corporation | Gasil® GM2 is a silica gel specifically designed as a moisture scavenger / degassing agent for aluminum paints and as a free-flow agent in powder coatings. | |
| CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | Request Sample |
| Dynoadd® F-810 | Dynoadd by Dynea | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...view more Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. view less | Request Sample |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | Request Sample |
| Borchi® Gel ALA | Borchers, A Company of OMG | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| RHEOBYK-7420 CA | BYK | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | Request Sample |
| SCHUTZENCOL- PC 80 | SCHÜTZEN Chemical Group | SCHUTZENCOL- PC 80 is an effective rheological additive for water-based paint formulations. It demonstrates excellent flow levelling properties and can potentially replace hydroxyethyl cellulose (HEC) in paint and coating applications. | |
| ZOCO 124 | Zochem Inc. | ZOCO 124 is a pelleted version of ZOCO 104 used in applications that require free flow, low dusting and low bulk. This product can be used in glazes. | |
| THIXATROL® ST | Elementis | THIXATROL® ST is a modified derivative of castor oil for use in aliphatic and aromatic solvent-borne coatings. It also imparts flow and leveling control to powder coatings. | Request Sample |
| RHEOBYK-7420 ES | BYK | RHEOBYK-7420 ES is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | Request Sample |
| RHEOBYK-7420 ET | BYK | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | Request Sample |
| ADDITOL® VXW 6360 | Allnex | ADDITOL® VXW 6360 is a polyurethane thickener for air-drying, aqueous coating systems. It has excellent rheologic properties, resulting in improved flow and leveling, film-build and brushability. | Request Sample |
| POLYFOX™ PF-2002 | Synthomer | POLYFOX™ PF-2002 is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2002 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-2003 | Synthomer | POLYFOX™ PF-2003 is an anionic fluorinated (CF3) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2003 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| RHODOLINE® OTE 600 | Univar Solutions | RHODOLINE® OTE 600 is an ecolabel compliant APE-free, low VOC and SVOC open time extender for waterborne coating formulations, which allows for improved applicability, flow and leveling, and film appearance. | Request Sample |
| Raybo 62 HydroFlo | Raybo Chemical | Raybo 62 HydroFlo is a coating additive in a white liquid form. This product is most commonly used as a flow control agent in water-based and water-reducible coating system applications. | |
| Dynoadd® F-701B | Dynoadd by Dynea | Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in ...view more Dynoadd® F-701B is a highly effective polymeric additive, particularly effective as air release and anti popping agent. It controls surface tension in solvent based coating systems. Small additions may also contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. This product has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-701B can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. view less | Request Sample |
| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...view more TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. view less | Request Sample |
| CAB-O-SIL® M-5 | Univar Solutions | CAB-O-SIL® M-5 is a medium surface fumed silica which enables a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers. | Request Sample |
