UL Prospector

Success!

Successfully saved your search
35 Results
ACRONAL® 700 L BASF Dispersions & Resins ACRONAL 700 L is a soft acrylic resin solution, resistant to light and aging, for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. Coatings based on it are well resistant to boiling ...view more ACRONAL 700 L is a soft acrylic resin solution, resistant to light and aging, for plasticizing cellulose nitrate and chlorine-containing binders for coatings with good flexibility and excellent adhesion. Coatings based on it are well resistant to boiling water. It is dissolved in 50% ethyl acetate that is used as a plasticizer for industrial coating applications. ACRONAL 700 L approx. 50% in ethyl acetate is used, particularly in combination with nitrocellulose, for formulating paper and film coatings, sealing wax, coatings for light metals and plastics and cellulose lacquers. Combined with chlorinated binders such as the LAROFLEX® MP grades, it yields coatings that are very resistant to hydrolysis for various substrates such as metals, concrete, or fiber cement. ACRONAL 700 L approx. 50% in ethyl acetate may also be used as a permanent plasticizer in urethane sealants or coatings. In many coating systems, it will improve the adhesion of primers. view less Request Sample
EPS® 7501 EPS Materials EPS® 7501 is a modified solution acrylic resin that can be easily formulated with a variety of economical solvents for concrete cure and seal applications. When properly formulated to 25% solids, EPS® 7501 meets the requirements of ASTM C-1315, Type I, Cl...view more EPS® 7501 is a modified solution acrylic resin that can be easily formulated with a variety of economical solvents for concrete cure and seal applications. When properly formulated to 25% solids, EPS® 7501 meets the requirements of ASTM C-1315, Type I, Class C. view less Request Sample
EPS® 7506 EPS Materials EPS® 7506 is a solution acrylic resin in an aromatic naphtha and tertiary-butyl acetate (TBAC) blend. It can be further formulated with exempt solvents for concrete cure and seal applications at lower VOC. When properly formulated to 25% solids, EPS® 75...view more EPS® 7506 is a solution acrylic resin in an aromatic naphtha and tertiary-butyl acetate (TBAC) blend. It can be further formulated with exempt solvents for concrete cure and seal applications at lower VOC. When properly formulated to 25% solids, EPS® 7506 is designed to meet the requirements of ASTM C-1315, Type I, Class C. view less Request Sample
EPS® 7725 EPS Materials EPS® 7725 is a solution acrylic polymer which can be formulated with a variety of solvents for concrete cure and seal applications. Request Sample
JONCRYL® 507 BASF Dispersions & Resins JONCRYL 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane...view more JONCRYL 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with JONCRYL 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane coating applications in the industrial coatings market. JONCRYL 507 is an alternate solvent version of JONCRYL 500 for low odor and nonHAPS applications. view less Request Sample
JONCRYL® 508 BASF Dispersions & Resins JONCRYL 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. JONCRYL 508 is an altern...view more JONCRYL 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. JONCRYL 508 is an alternate solvent version of JONCRYL 500 for low VOC applications. view less Request Sample
JONCRYL® 550 BASF Dispersions & Resins JONCRYL 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially a...view more JONCRYL 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin that is supplied in a 65/35 blend of PM-acetate/toluene. JONCRYL 550 differs from JONCRYL 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of JONCRYL 587. view less Request Sample
JONCRYL® 551 BASF Dispersions & Resins JONCRYL 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially a...view more JONCRYL 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin. JONCRYL 551 differs from JONCRYL 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of JONCRYL 587. view less Request Sample
JONCRYL® 611 BASF Dispersions & Resins JONCRYL 611 is a low viscosity solution acrylic resin that can be used to lower the viscosity of solution-based air drying alkyds. As a modifier in an alkyd, JONCRYL 611 imparts snap-dry, lacquer dry characteristics and contributes acrylic properties to t...view more JONCRYL 611 is a low viscosity solution acrylic resin that can be used to lower the viscosity of solution-based air drying alkyds. As a modifier in an alkyd, JONCRYL 611 imparts snap-dry, lacquer dry characteristics and contributes acrylic properties to the finished coating. In addition, JONCRYL 611 has shown excellent compatibility with a variety of other resins, including nitrocellulose. This product also reduces solvent demand in nitrocellulose coatings view less Request Sample
JONCRYL® 901 BASF Dispersions & Resins JONCRYL 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. JONCR...view more JONCRYL 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. JONCRYL 901 displays excellent viscosity characteristics without the addition of low molecular weight reactive diluents. Paints formulated with should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 906-AC BASF Dispersions & Resins JONCRYL 906-AC is an exempt solvent version of JONCRYL 906 that is recommended for high solids urethane coatings. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for convention...view more JONCRYL 906-AC is an exempt solvent version of JONCRYL 906 that is recommended for high solids urethane coatings. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. This product is a clear liquid that exhibits excellent gloss retention and fast dry time. view less Request Sample
JONCRYL® 909 BASF Dispersions & Resins JONCRYL 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane ...view more JONCRYL 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times, hardness development, and practical pot life. High solids coatings for maintenance, transportation, automotive refinish, and other applications can be formulated from 2.8 to 3.5 pounds per gallon of VOC. JONCRYL 909 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product should be considered as a candidate for high performance, maintenance, automotive refinish, and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 910 BASF Dispersions & Resins JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fa...view more JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. view less Request Sample
JONCRYL® 911 BASF Dispersions & Resins JONCRYL 911 is a high equivalent weight acrylic polyol designed for two-component acrylic urethane coating applications. This is a clear liquid. This product exhibits good durability, low VOC, and it is cost effective. Request Sample
JONCRYL® 915 BASF Dispersions & Resins JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink densit...view more JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink density. High solids coatings that are as low as 2.8 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 915 displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids polyurethane finishes. view less Request Sample
JONCRYL® 920 BASF Dispersions & Resins JONCRYL 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or air...view more JONCRYL 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. It displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. JONCRYL 920 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 922 BASF Dispersions & Resins JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coat...view more JONCRYL 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. JONCRYL 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as JONCRYL 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 924 BASF Dispersions & Resins JONCRYL 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain ...view more JONCRYL 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain 1.0 – 2.5 lbs/gal of VOC content. It possesses outstanding exterior durability and outstanding gloss, flow, leveling, and application properties. view less Request Sample
JONCRYL® 934 BASF Dispersions & Resins JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JON...view more JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 935 BASF Dispersions & Resins JONCRYL 935 is a high performance polyol for polyurethane coatings suitable for automotive refinish and industrial applications. It offers excellent exterior durability with good chemical resistance and is available in PCBTF as JONCRYL 939. Request Sample
JONCRYL® 942 BASF Dispersions & Resins JONCRYL 942 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. It displays fast cure rate and pot life. JONCRYL 942 should be considered as a candidate for high performance maintenance and transportat...view more JONCRYL 942 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. It displays fast cure rate and pot life. JONCRYL 942 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
JONCRYL® 945 BASF Dispersions & Resins JONCRYL 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. JONCRYL 945 should be considered as a candidate for high performance maintenan...view more JONCRYL 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. JONCRYL 945 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less Request Sample
Ottopol 25-30 Gellner Industrial, LLC Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-grap...view more Ottopol 25-30 is a clear, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less Request Sample
Ottopol 25-50 Gellner Industrial, LLC Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-g...view more Ottopol 25-50 slightly hazy, viscous acrylic resin solution, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. view less Request Sample
Ottopol G-35 Gellner Industrial, LLC Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and ...view more Ottopol G-35 is an acrylic resin solution, water based industrial polymer. Its unique characteristics impart excellent flow and leveling to inks and coatings, making gravure print quality possible. The viscosity curve of this resin is relatively flat and shows a very low degree of thixotropy resulting in a superior printing quality. Ottopol G-35 has excellent high gloss as well as good pigment wetting. Optimum color development is achievable with a large variety of pigments. view less Request Sample
Ottopol K-362 Gellner Industrial, LLC Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down...view more Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. Due to its positive charge, Ottopol K-362 allows inks and coatings to have excellent adhesion to plastic films such as mylar, PVC, and polystyrene, as well as to foil and other metallic surfaces. view less Request Sample
Ottopol K-633 Gellner Industrial, LLC Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear...view more Ottopol K-633 is a low molecular weight cationic acrylic resin solution. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin is impermeable to alkali without the use of cross-linking agents. The positive charge allows inks and coatings using Ottopol K-633 allows exceptionally good adhesion to plastic films. view less Request Sample
Ottopol M-30 Gellner Industrial, LLC Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordina...view more Ottopol M-30 is a slightly hazy acrylic resin solution. It is an excellent vehicle for inks made with copper and aluminum powder. The product's strong points are minimal soft settling of the metallic powder, and no tarnishing. Ottopol M-30 has extraordinary compatibility with basic dyes and fluorescent pigments. Fluorescent inks made from this product show no pH swing, which causes stability problems in other vehicle systems. view less Request Sample
VIACRYL® VSC 6250w/65MP Allnex Viacryl® VSC 6250W/65MP is an external cross-linking acrylate binder for application in cathodic electro dipping coating. Request Sample
VIACRYL® VSC 6292w/38WA Allnex Viacryl® VSC 6292W/38WA is a self cross-linking, thermosetting acrylate binder for application in cathodic electro dipping coating. Request Sample
WorléeCryl® 7461 Worlée-Chemie G.m.b.H. WorléeCryl® 7461 is an aqueous pure acrylic solution. It is a self-crosslinking pure acrylic dispersion with high solids content for formulating block-resistant and high gloss emulsion paints with very good levelling properties. This grade is supplied in ...view more WorléeCryl® 7461 is an aqueous pure acrylic solution. It is a self-crosslinking pure acrylic dispersion with high solids content for formulating block-resistant and high gloss emulsion paints with very good levelling properties. This grade is supplied in the form of 55% in water. The outstanding characteristic of this binder is the high block resistance which is usually demanded for window- and door-application etc. view less
WorléeCryl® 8040 Worlée-Chemie G.m.b.H. WorléeCryl® 8040 is an aqueous acrylic solution, free of emulsifiers. It is a ready-to-use solution that can be used for the production of flexographic- and gravure inkws and overprint varnishes. This product shows excellent compatibility with polystyrene...view more WorléeCryl® 8040 is an aqueous acrylic solution, free of emulsifiers. It is a ready-to-use solution that can be used for the production of flexographic- and gravure inkws and overprint varnishes. This product shows excellent compatibility with polystyrene-, acrylic- and methacrylic polymers. It can be used with most resins, for example as additive in combination with W´Cryl 8265 to improve dry and gloss on porous substrates. Crosslinking with water soluble melamine resins provides chemical resistant coatings. view less
WorléeCryl® 8043 Worlée-Chemie G.m.b.H. WorléeCryl® 8043 is an aqueous acrylic polymer solution, free of emulsifiers. It is an ideal grinding vehicle for highly filled pigment concentrates with excellent colour strength and gloss development. A wide range of flexographic and gravure printing in...view more WorléeCryl® 8043 is an aqueous acrylic polymer solution, free of emulsifiers. It is an ideal grinding vehicle for highly filled pigment concentrates with excellent colour strength and gloss development. A wide range of flexographic and gravure printing inks are obtained with this product. Due to its excellent pigment wetting properties W´Cryl 8043 provides gloss and colour intensity normally reached just with solvent systems. view less
WorléeCryl® 8060 Worlée-Chemie G.m.b.H. WorléeCryl® 8060 is an aqueous acrylic resin solution, free of emulsifier. It is a ready to use resin solution and is excellently suitable for the production of flexographic- and gravure inks. In combination with acrylic emulsion as W´Cryl 8290, VOCfree, ...view more WorléeCryl® 8060 is an aqueous acrylic resin solution, free of emulsifier. It is a ready to use resin solution and is excellently suitable for the production of flexographic- and gravure inks. In combination with acrylic emulsion as W´Cryl 8290, VOCfree, fast drying overprint varnishes can be formulated. This high solid resin solution is especially to be recommended as a replacement for comparable alcohol- and water diluted products. W´Cryl 8060 is compatible with the most various pigments, therefore it is possible to produce high solid, pure aqueous pastes. view less
WorléeCryl 8470 Worlée-Chemie G.m.b.H. WorléeCryl 8470 is a 25% acrylic resin solution in water. It is DMEA-neutralized for printing inks and OPVs. This product is cross-linkable with melamine resins.