| Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less | |
| CYMEL® U-1054 | Allnex | CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance propertie...view more CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles. view less | Request Sample |
| CYMEL® 327 | Allnex | CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance a...view more CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOCs in high solids formulations. view less | Request Sample |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| CYMEL® 385 | Allnex | CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide...view more CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers. view less | Request Sample |
| Orgatix® ZC-126 | GSI Exim America, Inc. | Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking...view more Orgatix® ZC-126 is a proprietary Titanium and Ziruconium compound used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. view less | |
| Orgatix® TC-310 | GSI Exim America, Inc. | Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking...view more Orgatix® TC-310 is a Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. view less | |
| Orgatix® TC-400 | GSI Exim America, Inc. | Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking...view more Orgatix® TC-400 is a Titanium triethanolaminate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. view less | |
| LUHYDRAN® A 848 S | BASF Dispersions & Resins | LUHYDRAN A 848 S is a self-crosslinking white emulsion suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. LUHYDRA...view more LUHYDRAN A 848 S is a self-crosslinking white emulsion suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. LUHYDRAN A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. view less | |
| CYMEL® 325 | Allnex | CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. I...view more CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings. view less | Request Sample |
| Orgatix® TC-315 | GSI Exim America, Inc. | Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking...view more Orgatix® TC-315 is a non-flammable Titanium lactate product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. view less | |
| Orgatix® TC-300 | GSI Exim America, Inc. | Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking...view more Orgatix® TC-300 is a Titanium lactate diammonium salt product used as a cross-linking agent for polyvinyl alcohol. It is highly reactive with active Hydrogen like Hydroxyl groups and Carboxyl groups in coatings, printing inks and adhesives industries. Orgatix® starts crosslinking on the boundary of 120-140℃（trigger temperature) and below the temperature of the trigger, high stability is maintained with no rise in viscosity. view less | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...view more CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. view less | |
| PERHEXA 25Z | PhibroChem | PERHEXA 25Z is a powder that provides additional options for peroxide use in chemical reactions. It is often used in abstraction polymerization. As a powder, it allows for a variety of uses such as a crosslinking agent for Powder Coatings as well as polym...view more PERHEXA 25Z is a powder that provides additional options for peroxide use in chemical reactions. It is often used in abstraction polymerization. As a powder, it allows for a variety of uses such as a crosslinking agent for Powder Coatings as well as polymers such as PE, EVA and EPR, and unsaturated polyester resins. This product has a lower activation temperature and higher oxygen content than other powder peroxides. view less | Request Sample |
| CYMEL® 3745 | Allnex | CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films ...view more CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations. view less | Request Sample |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...view more Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. view less | |
| CYMEL® 380 | Allnex | CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resista...view more CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. view less | Request Sample |
| CYMEL® 1141 | Allnex | CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This produ...view more CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors. view less | Request Sample |
| CYMEL® 203 | Allnex | CYMEL® 203 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to CYMEL® 202 which provides for better flow and leveling while maintai...view more CYMEL® 203 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to CYMEL® 202 which provides for better flow and leveling while maintaining fast cure and hydrophobicity. This product is highly reactive and has a high tendency towards self-condensation reactions at rather low baking temperatures providing films with very good hardness, gloss, chemical resistance, and outdoor durability. view less | Request Sample |
| XL-1219 | Quaker Color (a Division of McAdoo & Allen, Inc.) | XL-1219, in the form of a milky liquid, is a unique multifunctional water based polycarbodiimide cross-linker used to improve the performance and physical properties of acrylic resins and polyurethane for leather coatings. It should be used at levels betw...view more XL-1219, in the form of a milky liquid, is a unique multifunctional water based polycarbodiimide cross-linker used to improve the performance and physical properties of acrylic resins and polyurethane for leather coatings. It should be used at levels between 0.5-3% to enhance the physical properties of most leather coatings. Physical properties like blocking resistance, water resistance, and long term durability will all be improved with the incorporation of XL-1219 Crosslinker. view less | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesio...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| Tolonate™ D2 | Vencorex | Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component...view more Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component polyurethane systems for weatherable coatings. It gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. This product is commonly used in Automotive OEM formulations, can and coil coatings and other general industrial coatings on metal. view less | |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for gene...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...view more SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...view more SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
| EPS® 2786 | EPS Materials | EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...view more EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. view less | Request Sample |
| Lonzacure™ DETDA 80 | Arxada | Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking...view more Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy resin systems. It can be applied in any liquid manufacturing process, e.g for composites. view less | |
| Lonzacure™ DETDA 80 LC | Arxada | Lonzacure™ DETDA 80 LC is a low color and low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 LC also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking...view more Lonzacure™ DETDA 80 LC is a low color and low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 LC also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy resin systems. It can be applied in any liquid manufacturing process, e.g for composites. view less | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking...view more SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| CYMEL® 350 | Allnex | CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking...view more CYMEL® 350 resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. It is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and leveling characteristics and less solvent popping on cure. view less | Request Sample |
| CYMEL® 202 | Allnex | CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this produ...view more CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this product suitable for a wide range of medium to high solids or waterborne baking applications like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. It has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. view less | Request Sample |
| BYK-UV 3535 | BYK | BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV reactive and displays crosslinking...view more BYK-UV 3535 is a crosslinkable surface additive for radiation curable systems for improving leveling and recoatability. It improves the leveling of radiation curable systems. The product is very compatible and causes no haze in the coating system. In many cases it displays a deaerating effect. Even at a low dosage it leads to an increase in surface tension. Associated with this are increased surface energy, improved recoatability and intercoat adhesion, even of aqueous systems. In addition, BYK-UV 3535 produces an anti-slip effect. The additive is UV reactive and displays crosslinking with radiation curable systems. For this reason its effect is long lasting and it does not migrate. BYK-UV 3535 is suitable for solvent-free, solvent-borne, and aqueous, radiation curable systems. view less | Request Sample |
| LUHYDRAN® S 938 T | BASF Dispersions & Resins | LUHYDRAN S 938 T is APEO-free, crosslinkable emulsion that can be crosslinked with aliphatic polyisocyanates like BASONAT® HW 100 for two-pack polyurethane finishes. This product can be used for industrial heat-curable coatings, for example furniture lami...view more LUHYDRAN S 938 T is APEO-free, crosslinkable emulsion that can be crosslinked with aliphatic polyisocyanates like BASONAT® HW 100 for two-pack polyurethane finishes. This product can be used for industrial heat-curable coatings, for example furniture laminates or other substrates. Coatings formulated with LUHYDRAN S 938 T are hard, lightfast, and provide block and chemical resistance. view less | |
| Methyltris(methylethylketoximino)silane (MOS) | Quzhou Dayixin Chemical Co., Ltd. | Methyltris(methylethylketoximino)silane (MOS) is a colorless to light yellow transparent liquid that can crosslink with water and generate 2-butanone oxime. This product can be used as a cross-linking agent for silicone sealant. | |
| WorléeCryl® A 1218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1218 is an acrylic resin which can be crosslinked with polyisocyanates. It has high reactivity and long pot life. This product is designed for fast drying wood and furniture lacquers. It is also CAB compatible. | |
| Luna-mer B-68 | DKSH | Luna-mer B-68 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
| BYK-UV 3575 | BYK | BYK-UV 3575 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling. It displays a moderate reduction in surface tension and improves substrate wetting. The surface slip is increased and leveling is i...view more BYK-UV 3575 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling. It displays a moderate reduction in surface tension and improves substrate wetting. The surface slip is increased and leveling is improved. As a result of its multiple acrylic functionality, BYK-UV 3575 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability must be tested, surface sanding is recommended. The product is very compatible and causes no haze in the coating system. BYK-UV 3575 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| WorléeCryl® A 1320 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1320 is an acrylic resin which can be crosslinked with polyisocyanate. It is used for high quality wood and furniture lacquers. This product exhibits good initial drying. Also, in top coats a brilliant haze-free gloss will be provided. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| BYK-UV 3576 | BYK | BYK-UV 3576 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling without foam stabilization. It displays a low to moderate reduction in surface tension and improves substrate wetting. The surface s...view more BYK-UV 3576 is a crosslinkable surface additive for radiation curable systems for improving substrate wetting and leveling without foam stabilization. It displays a low to moderate reduction in surface tension and improves substrate wetting. The surface slip is not increased, or only slightly, and leveling is improved. The product does not cause foam to be stabilized; in some systems a defoaming effect is noticed. As a result of its multiple acrylic functionality BYK-UV 3576 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability is good in most systems, however this must be checked. The product is very compatible and causes no haze in the coating system. BYK-UV 3576 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| BYK-UV 3505 | BYK | BYK-UV 3505 is a crosslinkable surface additive for radiation curable systems for improving wetting, scratch resistance, and easy-to-clean properties. Even at a low dosage BYK-UV 3505 displays a strong reduction in surface tension and improves substrate ...view more BYK-UV 3505 is a crosslinkable surface additive for radiation curable systems for improving wetting, scratch resistance, and easy-to-clean properties. Even at a low dosage BYK-UV 3505 displays a strong reduction in surface tension and improves substrate wetting, even of difficult substrates. Surface slip is significantly increased even at low dosage. This leads, among other things, to an improvement in scratch resistance and the easy-to-clean properties. As a result of its multiple acrylic functionality, BYK-UV 3505 crosslinks with radiation curable systems and thereby produces long-lasting effects without migrating. Its recoatability must be tested, surface sanding is recommended. The product is very compatible and causes no haze in the coating system. BYK-UV 3505 is suitable for solvent-free, solvent-borne, and aqueous systems. view less | Request Sample |
| CARBODILITE V-02B | GSI Exim America, Inc. | CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodi...view more CARBODILITE V-02B is a multifunctional polycarbodiimide. This crosslinks strongly with waterborne resins to boost chemical/water resistance. It improves adhesion, hardness and abrasion/scratch resistance with waterborne urethane or acrylic resins. Carbodilite Waterborne V-series is a waterborne polycarbodiimide resin that contains a carbodiimide [─N═C═N─] group with a hydrophilic segment. This product is a clear pale yellow viscous liquid. view less | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...view more SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. view less | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...view more SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. view less | |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufac...view more WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufacture of high quality 2 component top coats. Paints based on W´Cryl A 2445 show excellent resistances against weather and chemicals. view less | |
| Chicure® 800 | Double Bond Chemical Ind., Co., Ltd. | Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalkin...view more Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalking resistance as well as excellent gloss retention, fewer color deviation and supreme chalking resistance after a long-term exposure. view less | |
| SR533 | Sartomer Americas | SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coat...view more SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coatings, TPE, inks, rubber and plastics, and wire and cable insulation. view less | |
| SR507A | Sartomer Americas | SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesive...view more SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesives, coatings, electronics, encapsulants, inks, polyurethane foams, and rubber & plastics. view less | |
| Saret® SR515 | Sartomer Americas | Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber...view more Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber systems. Saret® SR500 offers good hardness and high modulus. It has a low mooney viscosity and a low compression set. Suggested applications of this product are for rubber and plastics, elastomers for rubber and plastics, and sealants. view less | |
| Saret® SR519HP | Sartomer Americas | Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...view more Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR519HP is also available as a solid dispersion. Suggested applications include: elastomers, plastisols, rubber and plastics, building profile, injection molding and radiator hose rubbers and plastics, and sealants. view less | |
| Saret® SR517HP | Sartomer Americas | Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...view more Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR517HP is also available as a solid dispersion. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less | |
| Saret® SR522D | Sartomer Americas | Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D co...view more Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D contains a safe, non-nitroso scorch retarder and exhibits low color and low staining. Suggested applications for this product include belts, cables, and hoses; as well as, injection molding, radiator hose, rolls, and other rubber and plastics applications. view less | |
| Saret® SR517 | Sartomer Americas | Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performanc...view more Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less | |
| Saret® SR516 | Sartomer Americas | Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performa...view more Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less | |
| CYMEL® 373 | Allnex | CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations. | Request Sample |
| CYMEL® 1158 | Allnex | CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast...view more CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast cure response, low blistering tendency and low formaldehyde release during cure. view less | Request Sample |
| CYMEL® U-80 | Allnex | CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating...view more CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates. view less | Request Sample |
| CYMEL® U-662 | Allnex | CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for ac...view more CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission is required. view less | Request Sample |
| CYMEL® 1168 | Allnex | CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good comb...view more CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good combination of mechanical and chemical resistance properties. view less | Request Sample |
| CYMEL® U-1050-10 Resin | Allnex | CYMEL® U-1050-10 resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050 resin. CYMEL® U-1050-10 resin has wide compatibility with other film formers and is useful in fast curing industrial baki...view more CYMEL® U-1050-10 resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050 resin. CYMEL® U-1050-10 resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood. view less | Request Sample |
| CYMEL® UI-27-EI | Allnex | CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is no...view more CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications. view less | Request Sample |
| CYMEL® 1156 | Allnex | CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...view more CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. view less | Request Sample |
| CYMEL® 5010 | Allnex | CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to t...view more CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. view less | Request Sample |
| CYMEL® 659 | Allnex | CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the ...view more CYMEL® 659 resin is a partially n-butylated benzoguanamine resin supplied in n-butanol. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine resins, CYMEL® 659 is not suitable for exterior applications. view less | Request Sample |
| CYMEL® MI-12-I | Allnex | CYMEL MI-12-I resin is a partially iso-butylated melamine supplied in isobutanol. Its high reactivity, combined with very good leveling properties, makes CYMEL MI-12-I resin suitable for fast drying industrial applications like mirror backing, primers, an...view more CYMEL MI-12-I resin is a partially iso-butylated melamine supplied in isobutanol. Its high reactivity, combined with very good leveling properties, makes CYMEL MI-12-I resin suitable for fast drying industrial applications like mirror backing, primers, and dipping enamels. view less | Request Sample |
| CYMEL® U-1051 | Allnex | CYMEL® U-1051 resin is a partially iso-butylated urea resin supplied in a mixture of iso-butanol and xylene. It has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion va...view more CYMEL® U-1051 resin is a partially iso-butylated urea resin supplied in a mixture of iso-butanol and xylene. It has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes. view less | Request Sample |
| CYMEL® UI-19-I | Allnex | CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes this product suitable for ambient and low bake industrial wood finishes. | Request Sample |
| CYMEL® UI-21-E Resin | Allnex | CYMEL® UI-21-E resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E resin is not suitable for exterior applications. | Request Sample |
| Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...view more Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less | |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Chrome Alum Crystal | McGean-Rohco, Inc. | Chrome Alum Crystal is used in leather tanning, textile dyes, photography, ceramics, and as a cross linking agent in organic compounds. Chrome Alum Crystal is a precipitated product with lower chrome content and more waters of hydration than McGean’s Chro...view more Chrome Alum Crystal is used in leather tanning, textile dyes, photography, ceramics, and as a cross linking agent in organic compounds. Chrome Alum Crystal is a precipitated product with lower chrome content and more waters of hydration than McGean’s Chrome Alum Powder. view less | |
| Trimethylolpropane Diallyl Ether 80 | Perstorp | Trimethylolpropane Diallyl Ether 80 is mainly used in unsaturated polyesters for direct gloss coatings. Allyl Ethers contains both allyl groups and hydroxyl groups. | |
| Trimethylolpropane Diallyl Ether 90 | Perstorp | Trimethylolpropane Diallyl Ether 90 is mainly used in unsaturated polyesters for direct gloss coatings. Allyl Ethers contains both allyl groups and hydroxyl groups. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| CYMEL® 659E | Allnex | CYMEL 659E resin is a partially n-butylated benzoguanamine resin. | Request Sample |
| ADDITOL® VXW 6252 | Allnex | ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders. | Request Sample |
| ADDITOL® VXW 6385 | Allnex | ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin ...view more ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin catalysis. view less | Request Sample |
| CYMEL® U-663 | Allnex | CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity...view more CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission and high film gloss is required. view less | Request Sample |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less | |
| Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less | |
| BASONAT® HB 100 | BASF Dispersions & Resins | BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior p...view more BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HB 175 MP/X | BASF Dispersions & Resins | BASONAT HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for applications su...view more BASONAT HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HB 475 B/X | BASF Dispersions & Resins | BASONAT HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: interi...view more BASONAT HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant twopack polyurethane coatings. It is an approximately 75% solids solution in a 1:1 blend of nbutyl acetate and xylene. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | |
| BASONAT® HI 100 NG | BASF Dispersions & Resins | BASONAT HI 100 NG is a solvent-free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | |
| BASONAT® HI 2000 NG | BASF Dispersions & Resins | BASONAT HI 2000 NG is a solvent-free, low viscosity aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | |
| Tolonate™ HDB | Vencorex | Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. Th...view more Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastics, and wood. view less | |
| Tolonate™ HDB 75 B | Vencorex | Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd ur...view more Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. view less | |
| Ancamine® 2765 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...view more Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. view less | Request Sample |
| Tolonate™ X F 450 | Vencorex | Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high h...view more Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high hardness. It is especially suitable for fast drying formulations like aliphatic polyureas and polyaspartics, where it will overcome their brittleness and provide extended pot-life. view less | |
| Akuacure 4000N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 4000N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fine particle size. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8004N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8004N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8100N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8100N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8103N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8103N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fast drying. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 1073N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 1073N is an anti-yellowing, water dispersible polyisocyanate featuring very easy hand mixing characteristics and high efficiency. This product is ideal for use in adhesive, paint, and coating applications. |
