| Anti-blocking agent SR | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| BYK®-394 | BYK | BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint su...view more BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine, AcrylicEpoxy combinations. This additive improves leveling and gloss. It produces a long wave effect and prevents cratering without influence on surface tension (silicone-free). BYK-394 is thermally stable. view less | Request Sample |
| BYK®-P 9051 | BYK | BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not ...view more BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not contribute to fogging. In BMC for headlamp reflectors it minimizes fogging of the molded parts. Due to its lower viscosity the additive is easier to process than BYK-P 9050. view less | Request Sample |
| BYK-SILCLEAN 3701 | BYK | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | Request Sample |
| Combat® 10 Sf | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® 10 Sf is a ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommende...view more Combat® 10 Sf is a ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommended for light metal processing, secondary aluminum manufacturing, and glass manufacturing. view less | |
| Combat® A | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® A is a ready-to-use, water based, completely inorganic coating for easy application. A high-viscosity paste with a unique aluminum phorphate binder has higher solids than other coatings and must be diluted. This product offers a very strong bond w...view more Combat® A is a ready-to-use, water based, completely inorganic coating for easy application. A high-viscosity paste with a unique aluminum phorphate binder has higher solids than other coatings and must be diluted. This product offers a very strong bond with many different refractories. view less | |
| Combat® Green 10 SfG | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Green 10 SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This p...view more Combat® Green 10 SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommended for light metal processing, secondary aluminum manufacturing, and glass manufacturing. view less | |
| Combat® Green SfG | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Green SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also ...view more Combat® Green SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depending upon the application. view less | |
| Combat® Sf | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Sf is a ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depend...view more Combat® Sf is a ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depending upon the application. view less | |
| Combat® V | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® V is a ready-to-use, water based, completely inorganic coating for easy application. A thick composition that dries to a harder surface used in applications where a strong binder is needed such as coating moving parts in molten metal. It is excell...view more Combat® V is a ready-to-use, water based, completely inorganic coating for easy application. A thick composition that dries to a harder surface used in applications where a strong binder is needed such as coating moving parts in molten metal. It is excellent for coating graphite. view less | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | Request Sample |
| Escoat® P-20 Liquid | Mayzo, Inc. | Escoat® P-20 Liquid is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Liquid is used in adhesives and tapes. | |
| Escoat® P-20 Solids | Mayzo, Inc. | Escoat® P-20 Solids is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Solids is used in tapes and paper coatings. | |
| Escoat® WFX 120 Release Coat | Mayzo, Inc. | Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used ...view more Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used in adhesives, coatings, and tapes. view less | |
| Escoat® WPX 40 Release Coat | Mayzo, Inc. | Escoat® WPX 40 Release Coat is a non-silicone, carbohydrate polymer emulsion. It provides a moderate release performance. Escoat® WPX 40 Release Coat is used in coatings and adhesives. | |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies, Inc. | Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused. | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 145 is an amide wax in a non-ionic aqueous dispersion. Hydrocer 145 is recommended for use in the water-based coating systems. | |
| Lanco™ 1380 F | Lubrizol Advanced Materials, Inc. | Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains ...view more Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains no halogens, Lanco 1380 F can also be employed in areas where PTFE/PE waxes cannot be used. view less | |
| Lanco™ 1560 LF | Lubrizol Advanced Materials, Inc. | Lanco™ 1560 LF is a readily dispersible wax for waterborne coating and ink systems. | |
| Lanco™ Glidd 4832 | Lubrizol Advanced Materials, Inc. | Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in ...view more Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in can coatings and coil coatings. The use of Lanco™ Glidd 4832 leads to excellent scratch and abrasion resistance, significant COF reduction and good gloss retention. view less | |
| Lanco™ PP 1362 D | Lubrizol Advanced Materials, Inc. | Lanco™ PP 1362 D is a readily dispersible wax with a high melting range and excellent toughness. This additive shows a high hardness in combination with matting efficiency and an especially good resistance against burnishing. | |
| Lanco™ TF 1768 | Lubrizol Advanced Materials, Inc. | Lanco™ TF 1768 gives very good slip and abrasion resistance in liquid coating systems and powder coatings. Besides, the polymer combination leads to a very good metal marking resistance, while maintaining excellent compatibility and dispersability. | |
| Lanco™ TF 1778 | Lubrizol Advanced Materials, Inc. | Lanco™ TF 1778 gives very good slip and abrasion resistance in solvent based and powder coatings. The polymer combination is designed to give very low coefficients of friction, while maintaining excellent compatibility and dispersibility. | |
| Michem® Emulsion 52137 | Michelman | Michem® Emulsion 52137 is a nonionic polyethylene emulsion that provides lubricity and is effective as a high temperature mold release for metal dies. | |
| Michem® Emulsion 62125 | Michelman | Michem® Emulsion 62125 is a small particle size, #3 carnauba wax emulsion used as a release agent. | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...view more NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. view less | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...view more OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. view less | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with ma...view more PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. view less | |
| ProHere® L 90018 | Michelman | ProHere® L 90018 is a high efficiency, anionic polyethylene wax emulsion that imparts lubricity, release, torque control and block resistance in meal coatings. | |
| RA-130W Release Coat | Mayzo, Inc. | RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and ...view more RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and coatings. view less | |
| RA-150W Release Coat | Mayzo, Inc. | RA-150W Release Coat is a high quality release coating. It provides excellent release, even in high humidity environments. RA-150W Release Coat is used in solvent acrylics, hot-melt adhesives, and print varnishes. | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is recommended for powder, water-based, solvent-based, and UV systems. | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, leather, water-based, solvent-based and UV systems. | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnish...view more TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnishes, silk screen inks, and (litho) offset printing inks. It improves scratch and marker resistance with additional slip and deaerating activity. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2650. view less | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by...view more TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected by the seperation. Addition of the product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2700. view less | Request Sample |
| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...view more TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. view less | Request Sample |
| XIAMETER® OFX-0203 Fluid | Univar Solutions | XIAMETER® OFX-0203 Fluid is an alkylarylpolysiloxane fluid. It is compatible with most organic coatings and adhesive systems, and permits subsequent coating of fabricated parts without requiring unusual or extraordinary surface protection. | Request Sample |
