| Tytan ET (Tetra Ethyl Titanate) | Borica Co., Ltd. | Tytan ET is used in a variety of industrial applications as an adhesion promoter, as a crosslinking agent. It is commonly used for hydroxylic compounds and as a component of heat and corrosion resistant paints. | |
| Tytan PBT (Titanate Crosslinker) | Borica Co., Ltd. | Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resi...view more Tytan PBT is largely used in formulating heat and corrosion resistant paints. It can be used with zinc or alumina pigments to formulate paints suitable for application by brush or spray. It can also be used to formulate air-drying paint with silicone resins. Paint containing Tytan PBT is moisture sensitive during manufacture and storage. The film dries through hydrolysis of PBT to a thin layer of Ti-O-Si and then bond to the substrate. Once the film dries, it can stand up to 600 oC. view less | |
| Tytan S2 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...view more Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. view less | |
| Tytan S22 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...view more Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Tytan S6 (Titanate Silicone Crosslinking Agent) | Borica Co., Ltd. | Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...view more Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. view less | |
| Tytan TAA (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-i...view more Tytan TAA is a titanium chelate of which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan TAA has an excellent balance between reactivity and cross-linking/adhesion-improvement properties which makes it very suitable to strongly improve performance properties of industrial coatings on difficult modern polymeric substrates, glass and some metals. view less | |
| Tytan TET (Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane syste...view more Tytan TET is a water soluble titanate which can be used in a variety of applications. For example, it can be used as a cross-linking agent in aqueous and non-aqueous paint and wire enamel; it can also function as an adhesion promoter in polyurethane systems. view less | |
| Tytan TIPT (Tetra Isopropyl Titanate) | Borica Co., Ltd. | Tytan TIPT can be used as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. It is most suitable for use in the glass and glass fiber manufacturing. | |
| Tytan TNBT (Tetra N-Butyl Titanate) | Borica Co., Ltd. | Tytan TNBT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNBZ (Tetra N-Butyl Zirconate) | Borica Co., Ltd. | Tytan TNBZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPT (Tetra N-Propyl Titanate) | Borica Co., Ltd. | Tytan TNPT can be used as an adhesion promoting and cross-linking agent. It is recommended for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan TNPZ (Tetra N-Propyl Zirconate) | Borica Co., Ltd. | Tytan TNPZ is a very reactive primary zirconate that will hydrolyse immediately in contact with moisture. It is very suitable as an adhesion promoting and cross-linking agent for hydroxylic compounds or heat and corrosion resistant coatings. | |
| Tytan X85 (Titanate Crosslinker) | Borica Co., Ltd. | Tytan X85 is used as a cross linking agent for hydroxylic compounds. It is also used as a component of heat and corrosion resistant paints. | |
| UCECOAT® 2801 | Allnex | UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2801 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2801 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2801 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 2802 | Allnex | UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is no...view more UCECOAT® 2802 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under highly acidic conditions. This product contains no co-solvent. UCECOAT® 2802 exhibits good properties concerning the jetting and water resolubility before cure which are key requirements for inkjet application. UCECOAT® 2802 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 2803 | Allnex | UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-...view more UCECOAT® 2803 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable inkjet inks. It is anionically stabilized in water without any external emulsifier. It is not stable under acidic conditions. This product contains no co-solvent and exhibits favorable ink jetting properties associated with its water resolubility before cure. UCECOAT® 2803 provides hard cured coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 2804 | Allnex | UCECOAT® 2804 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. Its polymer composition was optimized for high ...view more UCECOAT® 2804 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. Its polymer composition was optimized for high reactivity and low migration potential. Approximately 99.5% of the solid fraction is constituted by oligomers and polymers having a molecular weight above 500 Daltons, at the same time, an acrylic double bond functionality equal to or greater than 6. It is tack-free and water re-dispersible after water evaporation but before cure. view less | Request Sample |
| UCECOAT® 2805 | Allnex | UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It i...view more UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It is characterized by an extremely low mean particle size associated with a low viscosity and an outstanding colloidal stability alone or in the presence of pigments. It is tack-free and water redispersible after water evaporation but before cure. Its polymer composition was optimized for good coating performance and low migration potential after cure. view less | Request Sample |
| UCECOAT® 2806 | Allnex | UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean part...view more UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic double bound functionality equal to or greater than 6. It is easily water redispersible and tacky after water evaporation but before cure. view less | Request Sample |
| UCECOAT® 2807 | Allnex | UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more det...view more UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more details. The product is solvent-free, tin-free, BPA-free and APEOfree. Based on tests obtained on a structural analogue, it is also non-irritant for skin and eyes. It is characterized by a low mean particle size associated with a low viscosity and an outstanding colloidal stability when used as such or in the presence of pigments and additives. It is tack-free after water evaporation and before cure. Its composition was optimized for good coating performance and low migration after cure. view less | Request Sample |
| UCECOAT® 6560 | Allnex | UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT 6560 and cured by ultraviole...view more UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex. view less | Request Sample |
| UCECOAT® 6570 | Allnex | UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance ...view more UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB). view less | Request Sample |
| UCECOAT® 7200 | Allnex | UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV r...view more UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solid content and/or hardness property. view less | Request Sample |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasi...view more UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. view less | Request Sample |
| UCECOAT® 7230 | Allnex | UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCEC...view more UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics. view less | Request Sample |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCEC...view more UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. view less | Request Sample |
| UCECOAT® 7630 | Allnex | UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (...view more UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating. view less | Request Sample |
| UCECOAT® 7655 | Allnex | UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrate...view more UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrates. view less | Request Sample |
| UCECOAT® 7674 | Allnex | UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, i...view more UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hardness in the polymerized coating along with good stain and chemical resistance. view less | Request Sample |
| UCECOAT® 7690 | Allnex | UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excel...view more UCECOAT® 7690 is a Tin free radiation curable polyurethane dispersion with an excellent outdoor durability. It can be used in varied exterior applications and on a wide array of substrates. The product is tack-free after water evaporation and has an excellent water release. Because of its non-irritant nature and low viscosity, it can be applied safely by spray, roller and curtain coating. view less | Request Sample |
| UCECOAT® 7700 | Allnex | UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented,...view more UCECOAT® 7700 is the Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| UCECOAT® 7701 | Allnex | UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially p...view more UCECOAT® 7701 is the MIT- and Sn-free version of UC 7699. It is a solvent-free, radiation curable polyurethane dispersion. It is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, especially pigmented, but can also be used for clear coatings and for other applications and substrates. This polyurethane dispersion is very reactive and the cured coating exhibits outstanding scratch and stain resistance also in thick pigmented layers. view less | Request Sample |
| UCECOAT® 7717 | Allnex | UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeue...view more UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeuerung” primers and combined applications with stains. UCECOAT® 7717 can be applied by spray or roller coater. view less | Request Sample |
| UCECOAT® 7733 | Allnex | UCECOAT® 7733 is a Xi-free (non irritant) UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while maintaining very good flexibility. It is recommended for use in: waterbased U...view more UCECOAT® 7733 is a Xi-free (non irritant) UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while maintaining very good flexibility. It is recommended for use in: waterbased UV clear and white pigmented coatings on wood, and waterbased UV protective clear coatings for PVC flooring. view less | Request Sample |
| UCECOAT® 7788 | Allnex | UCECOAT® 7788 is a Tin-free, VOC free, aliphatic polyurethane dispersion, characterized by best-in-class cost/performance balance, excellent dispersion stability, and versatility in use. It is ideally suited for industrial coatings applied by spray, curta...view more UCECOAT® 7788 is a Tin-free, VOC free, aliphatic polyurethane dispersion, characterized by best-in-class cost/performance balance, excellent dispersion stability, and versatility in use. It is ideally suited for industrial coatings applied by spray, curtain- or roller coater. This product can be formulated as such or in combination with various blending partners. view less | Request Sample |
| UCECOAT® 7850 | Allnex | UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity,...view more UCECOAT® 7850 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non-irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating. view less | Request Sample |
| UCECOAT® 7856 | Allnex | UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 m...view more UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 months) and complies with VOC-free, tinfree and stenomer-free requirements. Due to its low viscosity and its good responsiveness to rheology modifiers, it can be easily applied by spray, roller or curtain coating operation. The product can be advantageously applied in one single coat and does not require sanding (although it can still benefit from polishing). The cured coating exhibits good chemical and scratch resistance required for high-end wooden furniture topcoats, although it can also be used for other substrates and applications. view less | Request Sample |
| UCECOAT® 7999 | Allnex | UCECOAT® 7999 is a tin-free and APEO-free energy-curable polyurethane dispersion with ~22% bio-carbon offering. Ideal for high hardness and durability for clear and white coats. The product has a low VOC with an easy film formation requiring no cosolvent....view more UCECOAT® 7999 is a tin-free and APEO-free energy-curable polyurethane dispersion with ~22% bio-carbon offering. Ideal for high hardness and durability for clear and white coats. The product has a low VOC with an easy film formation requiring no cosolvent. It presents a high reactivity for an increased productivity. view less | Request Sample |
| UCECRYL® B 1181 | Allnex | UCECRYL B 1181 is a low MFFT straight acrylic emulsion copolymer. It is suggest for clear coats with excellent water resistance. | Request Sample |
| UCECRYL® B 3010 | Allnex | UCECRYL B 3010 is a medium MFFT straight acrylic emulsion copolymer. It is recommended for use in clear and pigmented coatings for concrete tiles. | Request Sample |
| UCECRYL® B 3014 | Allnex | UCECRYL® B 3014 is a straight acrylic emulsion copolymer. It is suitable for clear and pigmented coatings with excellent water resistance. | Request Sample |
| UCECRYL® B 3022 | Allnex | UCECRYL® B 3022 is amedium MFFT straight acrylic emulsion copolymer. It exhibits good adhesion on various substrate, as well as good resistance to water whitening and good weathering resistance. | Request Sample |
| UCECRYL® B 3030 | Allnex | UCECRYL® B 3030 is a low MFFT styrene acrylic emulsion copolymer. | Request Sample |
| UCECRYL® B 3033 | Allnex | UCECRYL® B 3033 is a waterbased acrylic resin developed for low VOC 1K concrete sealer market. | Request Sample |
| UCECRYL® B 3034 | Allnex | UCECRYL® B 3034 is a fine particle size pure acrylic emulsion recommended for use in clear and pigmented sealers, belonging to our ECOWISE™ CHOICE product range for selected applications. | Request Sample |
| UCECRYL® BMR 47 | Allnex | A low MFFT straight acrylic emulsion copolymer designed for use in paints. | Request Sample |
| UVECOAT® 2100 | Allnex | UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against ...view more UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against corrosion of pre-treated substrates. view less | Request Sample |
| UVECOAT® 2200 | Allnex | UVECOAT® 2200 is an amorphous unsaturated polyester resin for use in clear and pigmented UV curable powder coatings. Formulations based on UVECOAT® 2200 exhibit excellent corrosion and outdoor weathering resistance. | Request Sample |
| UVECOAT® 3001 | Allnex | UVECOAT® 3001 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications such as MDF and sandable primers. Coatings based on UVECOAT® 3001 exhibit good scratch and chemical resi...view more UVECOAT® 3001 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications such as MDF and sandable primers. Coatings based on UVECOAT® 3001 exhibit good scratch and chemical resistance. view less | Request Sample |
| UVECOAT® 3003 | Allnex | UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with...view more UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with good flexibility. view less | Request Sample |
| UVECOAT® 3005 | Allnex | UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on...view more UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on UVECOAT® 3005 exhibit excellent scratch resistance. view less | Request Sample |
| UVECOAT® 9010 | Allnex | UVECOAT® 9010 is a semi-crystalline unsaturated polyester resin for use in UV curable powder coatings. Used with amorphous resins from the UVECOAT® 2000 or 3000 range, UVECOAT® 9010 improves the smoothness and flexibility of the coating. | Request Sample |
| UVECOAT® 9146 | Allnex | UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. | Request Sample |
| UVECOAT® 9539 | Allnex | UVECOAT® 9539 is an amorphous unsaturated polyester resin for use in combination with other UVECOAT® resins to provide excellent adhesion of UV curable powder to a wide variety of metal substrates. | Request Sample |
| UVECOAT® T 37621 | Allnex | UVECOAT® T 37621 is a modified amorphous polyester resin for use in UV/EB radiation curing technology. The resin has been developed for a variety of speciality applications, such as toners, where a high reactivity combined with a high glass transition is ...view more UVECOAT® T 37621 is a modified amorphous polyester resin for use in UV/EB radiation curing technology. The resin has been developed for a variety of speciality applications, such as toners, where a high reactivity combined with a high glass transition is required. view less | Request Sample |
| UVEKOL® A | Allnex | Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass...view more Uvekol® A is a one-component acrylic resin for the lamination of glass systems. It is cured by UV light for 20 minutes. The Uvekol® A interlayer produces glass laminates with excellent acoustic performance. It can be applied with nearly all kinds of glass: flat and slightly bent, tempered, coated, and other types. view less | Request Sample |
| UVEKOL® FR-C | Allnex | Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass la...view more Uvekol® FR-C is a mono-component acrylic resin designed for glass lamination especially developed to confer safety impact resistance to fire resistant ceramic glass. The laminates made of this computer are cured under UV light for 20 minutes. The glass lamination process using Uvekol® FR-C is simple and does not require heating or pressure. view less | Request Sample |
| UVEKOL® S | Allnex | UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass...view more UVEKOL® S is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL® S interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated and other types of glass. view less | Request Sample |
| VIACRYL® SC 134/50WS165 | Allnex | Viacryl® SC 134/50WS165 is a thermoplastic, flexible methacrylate resin. It has very rapid physical drying and outstanding weather resistance. It also has excellent pigment wetting, alkali and water resistance. It's a sole binder for full tone masonry pai...view more Viacryl® SC 134/50WS165 is a thermoplastic, flexible methacrylate resin. It has very rapid physical drying and outstanding weather resistance. It also has excellent pigment wetting, alkali and water resistance. It's a sole binder for full tone masonry paints or resin modified plasters. view less | Request Sample |
| VIACRYL® SC 160/60T | Allnex | Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the...view more Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the use of additional plasticizers is not necessary. view less | Request Sample |
| VIACRYL® SC 175w/40WAIP | Allnex | Viacryl® SC 175W/40WAIP is a water dilutable acrylic resin. It is used as a binder for water dilutable flexographic and special gravure printing inks. | Request Sample |
| VIACRYL® SC 200/40X | Allnex | VIACRYL® SC 200/40X is an epoxy resin modified thermoplastic acrylic resin. It is used in air and forced drying industrial coatings with fast drying and high hardness, and in specialty coatings for glass, precious metals and plastics. | Request Sample |
| VIACRYL® SC 303/60BAC | Allnex | Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combina...view more Viacryl® SC 303/60BAC is used in combination with melamine resins and urea resins for the formulation of baking enamels. The principal application area is automotive finishes, in paticular metallics and clearcoats for two-coat metallic systems, in combination with cellulose acetobutyrate (CAB) for basecoats in two-coat metallics. view less | Request Sample |
| VIACRYL® SC 303/65XB | Allnex | VIACRYL® SC 303/65XB is an acrylic resin for crosslinking with amino resins for automotive finishes in particular for metallics. | Request Sample |
| VIACRYL® SC 341/60SNABAC | Allnex | Viacryl® SC 341/60SNABAC is an acrylic resin, heat-reactive with amino resins. It's used as a medium solid acrylic resin for uni-coloured automobile finishes and isocyanate systems. | Request Sample |
| VIACRYL® SC 370/75SNA | Allnex | VIACRYL® SC 370/75SNA is an acrylic resin, cross-linkable with amino resins or polyisocyanates (two-pack systems). It is used in high solids stoving enamels for automotive finishes or general industrial purposes. | Request Sample |
| VIACRYL® SC 454/50BSNB | Allnex | Viacryl® SC 454/50BSNB is a self crosslinking acrylic resin with excellent levelling. It is used in clear and pigmented exterior coatings of cans, twist-off lids and crown corks. | Request Sample |
| VIACRYL® SC 6834w/42WA | Allnex | Viacryl SC 6834W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. When combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industria...view more Viacryl SC 6834W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. When combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industrial wood applications. view less | Request Sample |
| VIACRYL® SC 6835W/50WA | Allnex | VIACRYL® SC 6835w/50WA is a medium Tg acrylic emulsion that exhibits excellent gloss and rapid water release. This resin has excellent compatibility with pigment dispersions and alcohols. VIACRYL SC 6835w/50WA can also be formulated as a high gloss clear ...view more VIACRYL® SC 6835w/50WA is a medium Tg acrylic emulsion that exhibits excellent gloss and rapid water release. This resin has excellent compatibility with pigment dispersions and alcohols. VIACRYL SC 6835w/50WA can also be formulated as a high gloss clear coat that will very quickly develop water, oil, and scuff resistance. view less | Request Sample |
| VIACRYL® SC 6841w/50WA | Allnex | VIACRYL® SC 6841w/50WA is a cationic acrylic dispersion. | Request Sample |
| VIACRYL® SC 6844w/42WA | Allnex | Viacryl SC 6844W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. Like Viacryl SC 6834w/42WA, when combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen c...view more Viacryl SC 6844W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. Like Viacryl SC 6834w/42WA, when combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industrial wood applications. SC 6844 allows for greater formulating latitude relative to SC 6834 when used with CYMEL® NF 3030. view less | Request Sample |
| VIACRYL® SSC 6280w/45WA | Allnex | VIACRYL® SSC 6280w/45WA is a water dilutable acrylic resin, crosslinkable with melamine resins. Coatings based on it can be sprayed, dipped or electrodeposited. Spraying application normally needs higher viscosities compared with solvent containing system...view more VIACRYL® SSC 6280w/45WA is a water dilutable acrylic resin, crosslinkable with melamine resins. Coatings based on it can be sprayed, dipped or electrodeposited. Spraying application normally needs higher viscosities compared with solvent containing systems. view less | Request Sample |
| VIACRYL® VSC 5721/65T | Allnex | Viacryl® VSC 5721/65T is a drying fatty acids modified acrylic copolymerisate for road-marking paints with high solid content. Soil absorption of such coatings is noticeable improved. | Request Sample |
| VIACRYL® VSC 5745 | Allnex | Viacryl® VSC 5745 is a hard-elastic adjusted basis resin for high-grade two-component thick-layer roadmarking paints with very good weather and abrasion resistance. If formulated properly you may achieve excellent levelling and satisfactory settling. | Request Sample |
| VIACRYL® VSC 6250w/65MP | Allnex | Viacryl® VSC 6250W/65MP is an external cross-linking acrylate binder for application in cathodic electro dipping coating. | Request Sample |
| VIACRYL® VSC 6254w/40WA | Allnex | Viacryl® VSC 6254W/40WA is a solvent-free copolymerisate dispersion consisting of styrene and acrylic esters. It is mainly suitable in combinations with alkyd emulsions and hydroxy functional copolymer dispersions in order to improve the physical drying p...view more Viacryl® VSC 6254W/40WA is a solvent-free copolymerisate dispersion consisting of styrene and acrylic esters. It is mainly suitable in combinations with alkyd emulsions and hydroxy functional copolymer dispersions in order to improve the physical drying properties. view less | Request Sample |
| VIACRYL® VSC 6273w/44WA | Allnex | Viacryl® VSC 6273W/44WA is an aqueous hydroxy functional copolymer emulsion with incorporated catalyst. It is used in combination with hexamethoxymethylmelamine (HMMM, e. g. Cymel 303 or Cymel 1130) stoving enamels with high gloss, good outdoor-durability...view more Viacryl® VSC 6273W/44WA is an aqueous hydroxy functional copolymer emulsion with incorporated catalyst. It is used in combination with hexamethoxymethylmelamine (HMMM, e. g. Cymel 303 or Cymel 1130) stoving enamels with high gloss, good outdoor-durability and little yellowing are achieved. view less | Request Sample |
| VIACRYL® VSC 6276w/44WA | Allnex | VIACRYL® VSC 6276W/44WA is an aqueous hydroxy functional copolymer emulsion that can be crosslinked with reactive melamine resin such as CYMEL® 325 or CYMEL® 327 to give less-yellowing industrial coating systems with good gloss. | Request Sample |
| VIACRYL® VSC 6279w/45WA | Allnex | VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It...view more VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It can even be used to formulate non yellowing decorative finishing systems with excellent outdoor durability and UV resistance. view less | Request Sample |
| VIACRYL® VSC 6286w/45WA | Allnex | Viacryl® VSC 6286W/45WA is a solvent-free, self-crosslinking styrene acrylic copolymer. It can be used as sole binder for non yellowing decorative paints, woodstains and for industrial applications. It can also be used as sole binder for aqueous wood lacq...view more Viacryl® VSC 6286W/45WA is a solvent-free, self-crosslinking styrene acrylic copolymer. It can be used as sole binder for non yellowing decorative paints, woodstains and for industrial applications. It can also be used as sole binder for aqueous wood lacquers. view less | Request Sample |
| VIACRYL® VSC 6292w/38WA | Allnex | Viacryl® VSC 6292W/38WA is a self cross-linking, thermosetting acrylate binder for application in cathodic electro dipping coating. | Request Sample |
| VIACRYL® VSC 6324/46BAC | Allnex | Viacryl® VSC 6324/46BAC is a physically drying acrylic resin. It is suited to formulate rapid drying industrial coating systems with good gloss retention. Its high petroleum resistance makes it suitable for use in automotive coatings for repair finishes. ...view more Viacryl® VSC 6324/46BAC is a physically drying acrylic resin. It is suited to formulate rapid drying industrial coating systems with good gloss retention. Its high petroleum resistance makes it suitable for use in automotive coatings for repair finishes. Cured films based on Viacryl VSC 6324/46BAC are outdoor durable and show good non-yellowing properties. view less | Request Sample |
| VIACRYL® VSC 6800w/47WA | Allnex | Viacryl® VSC 6800W/47WA is a waterborne, polyester modified, hydroxy-functional copolymer emulsion. In combination with reactive melamin resins (e.g. CYMEL 327 Resin or CYMEL 328 Resin) Viacryl® VSC 6800W/47WA provides glossy, non-yellowing industrial ena...view more Viacryl® VSC 6800W/47WA is a waterborne, polyester modified, hydroxy-functional copolymer emulsion. In combination with reactive melamin resins (e.g. CYMEL 327 Resin or CYMEL 328 Resin) Viacryl® VSC 6800W/47WA provides glossy, non-yellowing industrial enamels, when stoved at 130 - 140 °C (20 min.). view less | Request Sample |
| VIALKYD® AN 950/70X | Allnex | Vialkyd® AN 950/70X is a high-elastic thermosetting oil-free polyester resin. It is an outdoor durable, non-yellowing one coat stamping and deep-drawing coil-coating systems for aluminum, sheet steel and tin sheet as well as automotive primer. | Request Sample |
| VIALKYD® AQ-452 | Allnex | VIALKYD® AQ 518 is an alkyd resin in castor oil. It offers excellent adhesion and high gloss. This product provides good wetting of pigments and drying, as well as great flexibility and spread. | Request Sample |
| VIALKYD® AQ-518 | Allnex | VIALKYD® AQ 518 is an alkyd resin in castor oil. It offers excellent adhesion and high gloss. This product provides good wetting of pigments and drying, as well as great flexibility and spread. | Request Sample |
| VIALKYD® AQ-815 | Allnex | VIALKYD® AQ 815 is a urethane alkyd resin in soybean oil, not diluted. It offers excellent exterior durability, and provides high hardness and good drying. | Request Sample |
| VIALKYD® AV 608/60WS | Allnex | Vialkyd® AV 608/60WS is an air-drying styrene modified oil that is easy to use, has excellent weather resistance, good water and corrosion resistance, and high gloss. It's used as a sole binder for aluminium paints with brilliant effect and good gloss ret...view more Vialkyd® AV 608/60WS is an air-drying styrene modified oil that is easy to use, has excellent weather resistance, good water and corrosion resistance, and high gloss. It's used as a sole binder for aluminium paints with brilliant effect and good gloss retention. It's also used for zinc dust paints, mica iron paints, and anticorrosive paints. view less | Request Sample |
| VIALKYD® AY 120/65XMPAC | Allnex | Vialkyd® AY 120/65XMPAC is an acrylic modified, hydroxyl groups containing alkyd resin. It gives fast drying brilliant car refinishing enamles with good build and finishing enamels for railroad coaches, busses, etc. It also may also be used for the formul...view more Vialkyd® AY 120/65XMPAC is an acrylic modified, hydroxyl groups containing alkyd resin. It gives fast drying brilliant car refinishing enamles with good build and finishing enamels for railroad coaches, busses, etc. It also may also be used for the formulation of two coat metallic finishes. view less | Request Sample |
| VIALKYD® VAF 6091 | Allnex | Vialkyd® VAF 6091 is a high solids long oil alkyd resin for the production of high solids primers, wood stains and top coats. | Request Sample |
| VIALKYD® VTS 1202/65MPAC | Allnex | Vialkyd® VTS 1202/65MPAC is a silicone polyester with rapid curing and non-yellowing properties designed for coil coating enamels. | Request Sample |
