| E. GLYCOL ETHER DE | Brenntag North America | E. GLYCOL ETHER DE (Di ethylene glycol mono ethyl ether) is a colourless liquid with a pleasant mild odour. It is miscible in water and most of the organic solvents. It is ideal for use as a solvent for latex paints and wood stains, industrial cleaners. I...view more E. GLYCOL ETHER DE (Di ethylene glycol mono ethyl ether) is a colourless liquid with a pleasant mild odour. It is miscible in water and most of the organic solvents. It is ideal for use as a solvent for latex paints and wood stains, industrial cleaners. It is also used in the textile industry as dye and ink carrier. view less | Request Sample |
| E. GLYCOL ETHER DM | Brenntag North America | E. GLYCOL ETHER DM (E. glycol ether DM) is a very hydrophilic, slow-evaporating glycol ether. It is a colorless liquid with a mild, pleasant odor. It is miscible with water and most organic solvents. | Request Sample |
| E. GLYCOL ETHER EB | Brenntag North America | E. GLYCOL ETHER EB (Ethylene glycol butyl ether) is a colourless liquid with a mild odour. It has a high dilution ratio with petroleum hydrocarbons. It is soluble in alcohol and water. It is ideal for use in a variety of solvents, varnishes and coatings. | Request Sample |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...view more EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. view less | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...view more EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). view less | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...view more EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). view less | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...view more EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. view less | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...view more EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. view less | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...view more EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and view less | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...view more EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. view less | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...view more EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. view less | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...view more EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. view less | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...view more EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. view less | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...view more EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. view less | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...view more EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. view less | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...view more EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. view less | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...view more EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. view less | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...view more EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. view less | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...view more EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. view less | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...view more EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. view less | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...view more EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. view less | Request Sample |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| IMSIL® 1240 | Sibelco | IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durabi...view more IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.2 microns. view less | |
| IMSIL® A-10 | Sibelco | IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability ov...view more IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 2.4 microns. view less | |
| IMSIL® A-15 | Sibelco | IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, dura...view more IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 3.5 microns. view less | |
| IMSIL® A-25 | Sibelco | IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-25 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 5.0 microns. view less | |
| IMSIL® A-30 | Sibelco | IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-30 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 8.1 microns. view less | |
| IMSIL® A-45 | Sibelco | IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a medi...view more IMSIL® A-45 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It has excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.7 microns. view less | |
| IMSIL® A-75 | Sibelco | IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weatherin...view more IMSIL® A-75 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 11.3 microns. view less | |
| IMSIL® A-8 | Sibelco | IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering...view more IMSIL® A-8 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. This product is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. Its median particle size is 2.1 microns. view less | |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...view more MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. view less | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...view more MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 2 | Sibelco | MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 2 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 14.3 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® 3 | Sibelco | MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 3 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 10.8 microns. view less | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. view less | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...view more MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-16 | Sibelco | MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, w...view more MINEX® IG-16 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it may impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 900 microns. view less | |
| MINEX® IG-20 | Sibelco | MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, ...view more MINEX® IG-20 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it will impart many of the benefits of micronized MINEX grades, such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 600 microns. view less | |
| MINEX® IG-25 | Sibelco | MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-25 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 550 microns. view less | |
| MINEX® IG-35 | Sibelco | MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-35 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 268 microns. view less | |
| MINEX® IG-40 | Sibelco | MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-40 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 265 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-50 | Sibelco | MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance...view more MINEX® IG-50 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. In coatings formulations, it imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. This product has a median particle size of 225 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-56 | Sibelco | MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-56 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 125 microns and is easily dispersed in all conventional vehicle systems. view less | |
| MINEX® IG-60 | Sibelco | MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding t...view more MINEX® IG-60 is an industrial grade functional filler and extender which adds performance and value across a broad spectrum of applications. This product imparts many benefits such as tint retention, weatherability, and abrasion resistance, while adding texture, traction properties, and gloss control. It has a median particle size of 120 microns and is easily dispersed in all conventional vehicle systems. view less | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...view more P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. view less | Request Sample |
| P. GLYCOL ETHER PM ACETATE | Brenntag North America | P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and ur...view more P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins. view less | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...view more P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. view less | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...view more P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. view less | Request Sample |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| ROYALE® A | Sibelco | ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® A mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 70.0. view less | |
| ROYALE® C-60 | Sibelco | ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without a...view more ROYALE® C-60 mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. This product arrives ready for use without additional processing, screening or aging. It has a brightness value of 77.0. view less | |
| ROYALE® R | Sibelco | ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and parti...view more ROYALE® R mineral slurries from Hephzibah are produced with refined and activated kaolins, making them ideally suited for the diverse and exacting requirements of chemical and industrial product formulation. An optimal mix of chemistry, rheology and particle size distribution, this product arrives ready for use without additional processing, screening or aging. It has a brightness value of 79.0-80.0. view less | |
| SILVERBOND® 140 (Troy Grove, IL.) | Sibelco | SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 140 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 22.5µm. view less | |
| SILVERBOND® 200 (Troy Grove, IL.) | Sibelco | SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low s...view more SILVERBOND® 200 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. Its low surface area and hardness offers a minimal oil absorption for high loading and stiffening of elastomerics, high performance epoxies and cementitious systems. This product has a mean particle size of 19.6µm. view less | |
| SILVERBOND® 200M (Cleburne, TX.) | Sibelco | SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 200M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3258 cm²/g. view less | |
| SILVERBOND® 270M (Cleburne, TX.) | Sibelco | SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 270M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 3605 cm²/g and is completely inert and pH neutral. view less | |
| SILVERBOND® 300 (Troy Grove, IL.) | Sibelco | SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 300 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 16.6µm. view less | |
| SILVERBOND® 325 (Troy Grove, IL.) | Sibelco | SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 325 (Troy Grove, IL.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a mean particle size of 12.5µm. view less | |
| SILVERBOND® 325M (Cleburne, TX.) | Sibelco | SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 325M (Cleburne, TX.) ground crystalline silica is produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product has a surface area of 4825 cm²/g and is completely inert and pH neutral. view less | |
| SILVERBOND® 325M (Lugoff, SC.) | Sibelco | SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This produ...view more SILVERBOND® 325M (Lugoff, SC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. It has a median particle size of 15.3µm. view less | |
| SILVERBOND® 325M (Marston, NC.) | Sibelco | SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This prod...view more SILVERBOND® 325M (Marston, NC.) is a ground crystalline silica produced from a high purity quartz feed stock for manufacturing and formulation of applications which require structurally sound, chemically pure or nonreactive fine mineral fillers. This product is completely inert and will not degrade when employed in extreme temperatures or harsh environments. view less | |
| SNOBRITE® 60 (Mcintyre, GA) | Sibelco | SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 60 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 34% passes through a sieve of <.5 microns. It has a median particle size of 1.2µ. view less | |
| SNOBRITE® 68 (Mcintyre, GA) | Sibelco | SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 68 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 40% passes through a sieve of <.5 microns. It has a median particle size of 0.9µ. view less | |
| SNOBRITE® 75 (Mcintyre, GA) | Sibelco | SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resist...view more SNOBRITE® 75 (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 50% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. view less | |
| SNOBRITE® 75HB (Mcintyre, GA) | Sibelco | SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resi...view more SNOBRITE® 75HB (Mcintyre, GA) is a white extender pigment produced from airfloated intermediate kaolins. With a plate like crystal structure and high aspect ratio it provides good reinforcing properties, increased hardness and stiffness, and improved resistance to abrasion and tear. 56% passes through a sieve of <.5 microns. It has a median particle size of 0.5µ. view less |
