| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF Corporation, Chemical Intermediates | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF Corporation, Chemical Intermediates | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving pola...view more 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. It can be used in paint formulations and as a carrier fluid in film coatings. Dioxolane is also an effective solvent for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. view less | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF Corporation, Chemical Intermediates | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF Corporation, Chemical Intermediates | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF Corporation, Chemical Intermediates | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF Corporation, Chemical Intermediates | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...view more 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. view less | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...view more 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. view less | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4702-X-50 Chain Stopped Alkyd Resin | Gabriel Performance Products | 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems. | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...view more 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. view less | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...view more 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. view less | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...view more 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 4965-XMP-80 High Solids Silicone Modified Short Oil | Gabriel Performance Products | 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellen...view more 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellent adhesion to most metal surfaces. view less | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...view more 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. view less | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...view more 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. view less | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Butanediol divinyl ether | BASF Corporation, Chemical Intermediates | Butanediol divinyl ether is a colorless to yellow liquid, with a characteristic odor. It is soluble in water and with many organic solvents. Butanediol divinyl ether is used in the production of weather-resistant and radiation-curing paints. | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...view more CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...view more CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...view more CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. view less | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...view more CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. view less | |
| Capromer PD1 – 10 (PolyCLO NPG1000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. P...view more Capromer PD1 – 10 (PolyCLO NPG1000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desire view less | |
| Capromer PD1 – 20 (PolyCLO NPG2000) | BASF Corporation, Chemical Intermediates | Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer PD1 – 20 (PolyCLO NPG2000) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. PolyCLO grades are used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. view less | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4 – 05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PD4 – 05 (PolyCLO DEG550) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1 – 05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. ...view more Capromer™ PT1 – 05 (PolyCLO TMP540) offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...view more Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. view less | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...view more Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. view less | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...view more Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. view less | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...view more Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. view less | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...view more Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. view less | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...view more Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. view less | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...view more Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. view less | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...view more Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. view less | |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF Corporation, Chemical Intermediates | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less |
