| 15% POTASSIUM HEX-CEM | Borchers, A Company of OMG | 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...view more 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. view less | |
| 21% COBALT HYDROXY TEN-CEM | Borchers, A Company of OMG | 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...view more 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. view less | |
| Additive OF | Borchers, A Company of OMG | Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally co...view more Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component. view less | |
| Additive TI | Borchers, A Company of OMG | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...view more Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. view less | |
| Ascinin® Anti Skin 0444 | Borchers, A Company of OMG | Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special...view more Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided. Ascinin® Anti Skin 0444 contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is suitable for all solventborne and solvent-free oxidatively drying coatings. It might be used in clear-coats as well as in pigmented systems. This product is solved in a non-VOC solvent, so it contains a very low VOC portion and is of low odour. Hence it is especially recommendable for VOC-reduced coatings, High-Solids-paints, printing inks and for use in environmentally friendly coatings. view less | |
| Ascinin® Anti Skin 0445 | Borchers, A Company of OMG | Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and...view more Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. It is a clear, low viscous, colorless to yellowish liquid. This product is solved in a high flashpoint alcoholic solvent. It is suitable for common solventborne coatings as well as for polar and waterborne formulations. Ascinin® Anti Skin 0445 might be used in clearcoats as well as in pigmented systems. view less | |
| Borchers® AF 0670 | Borchers, A Company of OMG | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during produ...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| Borchers® AF 0871 | Borchers, A Company of OMG | Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable ...view more Borchers® AF 0871 is a 20% emulsion of a modified organo polysiloxane. It effectively prevents foam formation during the dispersion and grinding processes and is designed to destroy stabilized foam lamellae in water-based coatings. It is easily dilutable with water and efficient in most polymer dispersions. It is particularly suitable for highly filled pigmented systems and pigment pastes grinding. The efficiency is independent of the curing mechanism. Borchers® AF 0871 increases density during manufacturing process and application. It provides homogenous film built after application. It has been designed for use in water based emulsions and water-thinnable systems. The efficiency is proven in chemically curing systems based on polyurethanes (including acrylate modification) and acrylates (also hydroxyl bearing polyacrylates). view less | |
| Borchers® AF 1171 | Borchers, A Company of OMG | Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This ...view more Borchers® AF 1171 is a solvent-free defoamer based on silicones with hydrophobic particles for use in waterborne, solventborne and solvent-free systems. It is particularly suited for aqueous decorative paints and aqueous general industrial coatings. This product improves the film gloss, substrate wetting, colour strength in pigmented systems and avoids microfoam formation. It is easily emulsified in water and easy to incorporate. Borchers® AF 1171 is characterized by good binder compatibility and needs little shear force to incorporate. view less | |
| Borchers® AF T | Borchers, A Company of OMG | Borchers® AF T is a highly effective silicone-free defoamer for emulsion paints, paper coatings, glues, adhesives, textile auxiliaries and concrete additives. It both destroys foam and prevents its formulation. | |
| Borchers® Dry 0411 HS | Borchers, A Company of OMG | Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an orga...view more Borchers® Dry 0411 HS is a new cobalt-free primary drier for VOC-reduced alkyd resin coatings and high-solids coatings, as well as for oxidatively drying printing ink systems. The activity of the siccative metal is enhanced by its combination with an organic drying accelerator. The product can be used as a surface drier either in clear coats or pigmented coating systems, where it replaces other primary driers, especially cobalt siccatives. view less | |
| Borchers® LH 10 | Borchers, A Company of OMG | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...view more Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. view less | |
| Borchi® Coll 10 | Borchers, A Company of OMG | Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it af...view more Borchi® Coll 10 is an anti-blocking additive for all waterborne paints and coatings. It has a slightly turbid appearance. This product is a colloid dispersion of silica particles of variable particle size according to type. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. Borchi® Coll also improves adhesion to wood, plastic and metal surfaces. It reduces the tendency towards under-rusting as a result of improved film quality and more uniform distribution of barrier properties on the substrate. view less | |
| Borchi® Coll 20 | Borchers, A Company of OMG | Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior pain...view more Borchi® Coll 20 is an anti-blocking additive for all waterborne paints and coatings. It has an opalescent turbid appearance. It is a colloid dispersion of silica particles of variable particle size according to type. It improves interior and exterior paints based on polymer dispersions, such as copolymers of vinyl acetate, ethylene and vinyl chloride, have been achieved by the addition of Borchi® Coll 20. An addition rate of approximately 5 % increases film hardness and makes the films dirt-repellent. view less | |
| Borchi® Coll 20 M | Borchers, A Company of OMG | Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicat...view more Borchi® Coll 20 M is a colloid dispersion of silica nanosized particles which acts as an anti-blocking additive for all waterborne paints and coatings. With its reactive groups, it affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. It also improves adhesion to wood, plastic and metal surfaces. This product is particularly suitable for use in waterborne isocyanate-modified alkyd resins and accelerates drying of the films. It also improves film strength and final film hardness. This product appears an opalescent turbid liquid view less | |
| Borchi® Coll 30 | Borchers, A Company of OMG | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...view more Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. view less | |
| Borchi® Gel 0434 | Borchers, A Company of OMG | Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optima...view more Borchi® Gel 0434 is a liquid, polyurethane-based associative thickener that is free of any solvents, alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants) and tin compounds. This product is therefore particularly well suited for setting an optimal viscosity in all waterborne coatings for application by brush or roller, especially under higher-shear conditions (> 1000 s-1). It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0435 | Borchers, A Company of OMG | Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. B...view more Borchi® Gel 0435 is an associative, APEO- and tin-free polyurethane thickener for rheology control under higher-shear conditions (> 1000 s-1). It can be used as a universal thickening agent in all waterbased systems, whether pigmented or unpigmented. Borchi® Gel 0435 is characterized by its extraordinary efficacy in most coating systems under high-shear conditions, which makes the product particularly well suited for setting the optimal viscosity in all waterborne coatings for application by roller or brush. It is highly economical to use and produces low-spattering coatings with outstanding roller/brush application properties and good physical properties such as leveling, covering power, gloss, mar resistance, etc. view less | |
| Borchi® Gel 0620 | Borchers, A Company of OMG | Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with bind...view more Borchi® Gel 0620 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO) and tin compounds. Depending on the type of binder used and the other components of the system it produces by means of a non-covalent network with binder particles and pigments a pronounced shear-thinning flow behavior. This product is suitable as thickening agent for all waterborne systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0621 | Borchers, A Company of OMG | Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other compon...view more Borchi® Gel 0621 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces depending on the type of binder used and the other components of the system a shear-thinning flow behavior. It is well suited as thickening agent for all waterborne painting systems, especially for industrial and decorative coatings, adhesives and knifing fillers. view less | |
| Borchi® Gel 0625 | Borchers, A Company of OMG | Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity...view more Borchi® Gel 0625 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. Depending on the resin binder and other paint ingredients used, it develops viscosity stability mainly in the range between 1000 s-1 - 10000 s-1. This product is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel 0626 | Borchers, A Company of OMG | Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high...view more Borchi® Gel 0626 is a liquid polyurethane-based thickener that is free of alkylphenol ethoxylate (APEO), HAPs (Hazardous Air Pollutants), tin compounds and any solvents. The product mostly produces a strong shear-thinning flow behavior in medium- and high-shear range (1000 - 10000 s-1). It is suitable as thickening agent for all waterborne painting systems, especially for industrial coatings, adhesives and knifing fillers as well as for architectural paints. view less | |
| Borchi® Gel ALA | Borchers, A Company of OMG | Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film...view more Borchi® Gel ALA is a polyacrylate-based thickener in the form of a solution of anionic acrylic polymer in water. This product improves the rheological of aqueous coating systems. It allows optimum adjustment of flow and levelling properties, improves film structure and minimizes spatter during application of emulsion paints, lacquers and printing inks. The optimization of flow characteristics results in a significant improvement in optical properties, particularly in high gloss emulsion systems. view less | |
| Borchi® Gel L 75 N | Borchers, A Company of OMG | Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of...view more Borchi® Gel L 75 N is a polyurethane based, non-ionic liquid thickener. lt acts as a flow promoter in emulsion paints and stabilizes pigmented aqueous paints. The particular molecular structure of Borchi® Gel L 75 N allows its adsorption at the surface of dispersed particles formed as a result of emulsion polymerisation. lt is characterised by good efficiency. lt improves the rheological properties of emulsion paints, making the end-products easier to apply with a roller or a brush despite a considerable increase in viscosity. The product can be combined with other thickeners to achieve special effects. Since it improves the flow properties of emulsion paints, Borchi® Gel L 75 N has proved particularly useful for thickening acrylic gloss paints and anti-corrosion coatings. view less | |
| Borchi® Gel LW 44 | Borchers, A Company of OMG | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| Borchi® Gel PN | Borchers, A Company of OMG | Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatin...view more Borchi® Gel PN is an aqueous solution of an organic ammoniacal zirconium compound. Borchi® Gel PN is a thixotropic additive for use in water based coating systems, as well as in solvent-free systems. Borchi® Gel PN can be used in all water based coatings containing hydroxyl and carboxyl groups able for interaction. Borchi® Gel PN works through a reaction of association of the active part of the Zirconium complex with reactive groups on the polymer in emulsion or thickener. view less | |
| Borchi® Gel PW 25 | Borchers, A Company of OMG | Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This pro...view more Borchi® Gel PW 25 is a non-ionic, polyurethane-based thickener dissolved in a 4:6 solution of water / propylene glycol. lt is particularly suitable for increasing the viscosity of ready-mixed textured finishes, decorative and industrial coatings. This product is characterised by exceptionally good thickening properties in most dispersion binders. It has a very high water retention capacity, so the coating can be applied over long periods. view less | |
| Borchi® Gen 0451 | Borchers, A Company of OMG | Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps...view more Borchi® Gen 0451 is a solvent-free polyurethane oligomer with excellent wetting and deflocculation properties. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization, which helps achieve excellent color strength and high gloss. Borchi® Gen 0451 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing universal pigment pastes. It is suitable for both solvent based and water based systems. view less | |
| Borchi® Gen 0650 | Borchers, A Company of OMG | Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation o...view more Borchi® Gen 0650 is an anionic, solvent- and APEOs-free wetting and dispersing agent for aqueous and solvent-borne systems, as well as for solvent-free formulations. Due to its anionic structure, this product is suitable for dispersing and stabilisation of pigments having polar surface. The additive produces an equal charge on the pigments surface and thus effectively prevents re-flocculation of pigments having various surface charges. view less | |
| Borchi® Gen 0755 | Borchers, A Company of OMG | Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabi...view more Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments, excellent color strength and high gloss is achieved. This product prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. view less | |
| Borchi® Gen 0851 | Borchers, A Company of OMG | Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blac...view more Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blacks and organic pigments, this product significantly reduces the viscosity of the mill base, enabling the production of highly concentrated pigment pastes. lt effectively inhibits pigment reflocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. Borchi® Gen 0851 enhances the gloss and reduces the haze of finishing paints. view less | |
| Borchi® Gen 1051 | Borchers, A Company of OMG | Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use...view more Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use in high-grade industrial coatings such as automotive-OEM and repair coatings, as well as in pigmented furniture finishes. Its main area of use is in two-component polyurethane-based systems and it shows optimal compatibility in medium-polar binder systems. view less | |
| Borchi® Gen 12 | Borchers, A Company of OMG | Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This pr...view more Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This product improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive effectively prevents a reflocculation of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. view less | |
| Borchi® Gen 1251 | Borchers, A Company of OMG | Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through steri...view more Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1251 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing pigment pastes. view less | |
| Borchi® Gen 1252 | Borchers, A Company of OMG | Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for prep...view more Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous and solventborne pigment concentrates with and without grinding resin. view less | |
| Borchi® Gen 1253 | Borchers, A Company of OMG | Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applica...view more Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applications. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1253 prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. In addition, this product contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gen 1350 | Borchers, A Company of OMG | Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins...view more Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous pigment concentrates. Borchi® Gen 1350 reveals high dispersing and stabilizing capability for transparent iron oxide pigments as well as organic and inorganic pigments. view less | |
| Borchi® Gen 911 | Borchers, A Company of OMG | Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very...view more Borchi® Gen 911 is a wetting and dispersing agent dissolved in hydrocarbons for paints and pigment pastes containing solvent. It is specially recommended for alkyd resin based systems. This product consists of a combination of active ingredients with very good wetting and dispersion-promoting properties and also anti-settling properties during storage. It inhibits both re-agglomeration of the pigments and formation of hard sediment. Borchi® Gen 911 brings about rapid wetting and thus shortens the grinding process. The extremely fine pigment grind also leads to improved pigment yield, greater color intensity and better hiding power. It can be used in virtually all conventional lacquers and oil paints and is particularly suitable for systems containing pigments with a tendency to settle. view less | |
| Borchi® Gen DFN | Borchers, A Company of OMG | Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens...view more Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive - even when added afterwards - effectively prevents floating of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. This product is suitable for air-drying and baking emulsion paints and lacquers. The main areas of application are in pure acrylic, styrene-acrylic and styrene-butadiene dispersions. view less | |
| Borchi® Gen HE | Borchers, A Company of OMG | Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibi...view more Borchi® Gen HE is an additive to used improve adhesion of baking paints and primers on metal substrate. It is also used to improve the fixation of metallic pigments in coatings. This product is completely silicone-free. Borchi® Gen HE shows good compatibility with various resins; nevertheless a compatibility check is recommended. view less | |
| Borchi® Gen PB 60 | Borchers, A Company of OMG | Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins...view more Borchi® Gen PB 60 is excellently suited to the manufacture of stock pastes from powdered inorganic gelling agents in organic solvents, such as white spirit, xylene, butyl glycol. Borchi® Gen PB 60 can be used in styrenated alkyd resins; epoxy ester resins; alkyd / nitrocellulose; alkyd / urea / melamine silicone resins; chlorinated and cyclized rubber; vinyl resins PVC organosols / plastisols Unsaturated polyesters (UPR). view less | |
| Borchi® Gen SN 95 | Borchers, A Company of OMG | Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re...view more Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re-flocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. This product enhances the gloss and reduces the haze of finishing paints, contains no organic solvents whatsoever and is completely VOC-free. view less | |
| Borchi® Gol 0011 | Borchers, A Company of OMG | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...view more Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. view less | |
| Borchi® Gol 1375 | Borchers, A Company of OMG | Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with...view more Borchi® Gol 1375 is a solution of non-ionic and amphoteric surfactants as active ingredients for the promotion of substrate wetting of hydrophobic or dirt/oil contaminated surfaces, VOC- and APEO-free. Borchi® Gol 1375 is a highly efficient additive with strong surface affinity and low-foaming properties. It can be used in waterborne and solventborne systems. view less | |
| Borchi® Gol 3451 | Borchers, A Company of OMG | Borchi® Gol 3451 prevents levelling / flowing resulting in surface structures, used for creating special effects such as hammer-finish. Recoatability is not recommended with this product. It can be used in virtually all binder systems. | |
| Borchi® Gol 3467 | Borchers, A Company of OMG | Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi®...view more Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi® Gol 3467 can be used in waterborne and solvent borne. view less | |
| Borchi® Gol 3739 | Borchers, A Company of OMG | Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kin...view more Borchi® Gol 3739 is a substrate wetting agent for aqueous paints. It improves wetting of critical supports like oil or grease contaminated steel, plastics and resinous wood. This product is highly efficient and has an excellent compatibility with most kinds of water based binder systems. view less | |
| Borchi® Gol E2 | Borchers, A Company of OMG | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...view more Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. view less | |
| Borchi® Gol H 250 | Borchers, A Company of OMG | Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with...view more Borchi® Gol H 250 is a leveling agent for baking enamels such as coil and can-coat paints. It improves flow properties. Because of its good compatibility, it can be used in numerous paint systems. lf used in polyurethane systems, a secondary reaction with the solvent n-butanol may occur. view less | |
| Borchi® Gol LA 1 | Borchers, A Company of OMG | Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used ei...view more Borchi® Gol LA 1 is a surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in waterborne and solventborne coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl-functional polyacrylates and polyesters, primarily polyester melamine or polyester isocyanate systems. In physically drying systems like water-soluble alkyds, polyurethane and acrylate dispersions, this product improves scratch, levelling and slip behaviour. view less | |
| Borchi® Gol LA 10 | Borchers, A Company of OMG | Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used eit...view more Borchi® Gol LA 10 is a pre-diluted surface active agent based on an organo-modified silicone compound. It promotes flow and levelling properties in solvent based coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters , primarily polyester melamine or epoxy systems. Borchi® Gol LA 10 furthermore controls surface levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 2 | Borchers, A Company of OMG | Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension r...view more Borchi® Gol LA 2 is a VOC free surface active agent based on an organo-modified silicone compound. It improves flow and levelling properties in solvent-based, solvent-free and water-soluble coating systems. This product develops a medium surface tension reduction and can be used either for clearcoats or for pigmented coating systems. Borchi® Gol LA 2 is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints like hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine or epoxy systems. It also supports levelling in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. This product is especially recommended in systems where solvent-free additives or certain solvents are required. To facilitate incorporation ability it may be helpful to dissolve Borchi® Gol LA 2 in solvents glycol-, aliphatic-, aromatic-, or ester-based. view less | |
| Borchi® Gol LA 20 | Borchers, A Company of OMG | Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compati...view more Borchi® Gol LA 20 is a pre-diluted, highly efficient organo-modified silicone compound to improve surface properties during and after application. This product reduces surface damage like pin holes and craters. It is characterized by good binder compatibility and is particularly suitable for chemically curing finishing paints based on hydroxyl bearing polyacrylates and polyesters, primarily polyester melamine, epoxy and certain UV systems. It also controls surface effects in physically curing finishes based on long-, middle and short chain alkyds and polyacrylates. view less | |
| Borchi® Gol LA 200 | Borchers, A Company of OMG | Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmen...view more Borchi® Gol LA 200 is a solventless modified polysiloxane which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It also positively influences optical film properties. view less | |
| Borchi® Gol LA 232 | Borchers, A Company of OMG | Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be...view more Borchi® Gol LA 232 is a solventless combination of modified polysiloxane and alcohol alcoxylated, which provides high surface slip and improves flow and leveling properties. It is characterized by a good binder and system compatibility. The product can be used for high quality clears and pigmented industrial (including OEM, car repair) and all types of decorative coatings. It can be also used in systems for the production of radiation-curable coatings for wood, wood-based materials, plastic, paper and printing inks. view less | |
| Borchi® Gol LA 30 | Borchers, A Company of OMG | Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and cra...view more Borchi® Gol LA 30 is a pre-diluted, highly efficient organo-modified silicone compound used to improve surface properties during and after application. This product will positively influence flow and levelling properties and formation of pin holes and craters will be reduced. It can be used either for clearcoats or for pigmented coating systems. view less | |
| Borchi® Gol LA 50 | Borchers, A Company of OMG | Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the...view more Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the interfacial tension differences between the liquid and the substrate. This product reduces cratering and pin hole tendency and is compatible in most binders. It can be used for high quality clears and pigmented industrial and decorative coatings. view less | |
| Borchi® Gol LA 6 | Borchers, A Company of OMG | Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension...view more Borchi® Gol LA 6 is a pre-diluted, highly efficient organo-modified silicone compound to improve wetting ability on critical substrates. Furthermore, flow and leveling properties will be positively influenced.This product develops a strong surface tension reduction and can be used either for clearcoats or for pigmented coating systems. This product favourably controls optical film appearance with reduced haze and increased gloss. view less | |
| Borchi® Gol M 51 | Borchers, A Company of OMG | Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of pa...view more Borchi® Gol M 51 is a leveling and anti-floating agent. It is a very effective flow-promoter and appreciably reduces surface tension. lt acts as an anti-floating agent and can be used as an "anti-silicone", i.e. it counteracts defects in the surface of paint films which may be caused by silicones in polishes. This product can be used both in systems which dry physically and in chemically curing systems, but its binder compatibility is limited. view less | |
| Borchi® Gol MA | Borchers, A Company of OMG | Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous ...view more Borchi® Gol MA is a leveling and anti-floating agent. lt reduces surface tension and prevents horizontal floating of pigments. This product is very well suited to use in polymers which dry physically. lt acts as a very effective flow-promoter in numerous alkyd paints. In unsaturated polyester paints containing paraffin, it promotes uniform floating of the paraffin and de-aeration. However, the binder compatibility of this product is limited. view less | |
| Borchi® Gol OL 17 | Borchers, A Company of OMG | Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of eff...view more Borchi® Gol OL 17 is an additive used to improve flow properties and surface smoothness. This product eliminates spray structures, orange-peel and prevents the formation of craters. It is characterised by good binder compatibility and a high degree of efficiency in many binders. This product is water-soluble but its use in such solutions should always be preceded by extensive trials on account of their limited stability in waterborne binders. view less | |
| Borchi® Gol OL 31 | Borchers, A Company of OMG | Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This p...view more Borchi® Gol OL 31 is an additive used to improve slip and leveling properties. This product is a very effective levelling agent. lt eliminates craters, spray structures and surface defects that may be caused by silicone products (e.g. in polishes). This product is usable in paints which dry physically as well as in chemically curing paints. lt is characterized by good binder compatibility and is particularly suitable for use in silicone resins. view less | |
| Borchi® Gol OL 44 | Borchers, A Company of OMG | Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to ver...view more Borchi® Gol OL 44 is an additive used to improve slip and leveling properties. It is an effective levelling agent. This product eliminates craters and spray structures and increases slip properties. It is very versatile and is characterized by good to very good efficiency in baking paints based on alkyd resin, alkyd / amino resin combinations and in acrylic resin and acrylic / amino resin combinations. view less | |
| Borchi® Gol PL | Borchers, A Company of OMG | Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reductio...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less | |
| Borchi® Kat 0243 | Borchers, A Company of OMG | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0244 | Borchers, A Company of OMG | Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0244 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. The use of Borchi® Kat 0244 ensures fast blocking stability of polyurethane coatings. It also improves solvent resistance, high film hardness and early sandability of the coating. This product is suitable for automotive refinishing. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| Borchi® Kat 0245 | Borchers, A Company of OMG | Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyuret...view more Borchi® Kat 0245 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne one- and two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. This product is suitable for automotive refinishing and industrial coating. In these formulations, Borchi® Kat 0245 is characterized by its very good and consistent activity and stability, even after prolonged storage. view less | |
| Borchi® Kat 24 | Borchers, A Company of OMG | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Borchi® Kat 315 | Borchers, A Company of OMG | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® Kat 320 | Borchers, A Company of OMG | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Borchi® OXY - Coat | Borchers, A Company of OMG | Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent resul...view more Borchi® OXY - Coat is a metal-based catalyst which demonstrates excellent performance at low use levels. In direct comparison to cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in all coatings which dry by oxidation, such as Alkyd, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| Borchi® OXY - Coat 1101 | Borchers, A Company of OMG | Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results...view more Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| Borchi® Set 134 | Borchers, A Company of OMG | Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action...view more Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy resin esters, alkyd resins, chlorinated and cyclised rubber, DD systems, vinyl resin polymers and copolymers. view less | |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...view more Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. view less | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...view more Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. view less | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...view more Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. view less | |
| Epoxies® 20-1615 | Epoxies, Etc. | Epoxies® 20-1615 is a clear, orderless, two part silicone rubber compound that is low in viscosity and cures in room temperature. Primarily used for potting electronic assemblies that require shock and vibration resistance, it can also protect assemblies ...view more Epoxies® 20-1615 is a clear, orderless, two part silicone rubber compound that is low in viscosity and cures in room temperature. Primarily used for potting electronic assemblies that require shock and vibration resistance, it can also protect assemblies from moisture, ozone, chemicals and other environmental hazards. view less | |
| Epoxies® 20-1625 | Epoxies, Etc. | Epoxies® 20-1625 is a two part optically clear silicone potting and encapsulating compound with a low viscosity and easy 1:1 ratio system. 20-1625 is formulated without solvents or other toxic materials and provides good heat resistance and is flame retar...view more Epoxies® 20-1625 is a two part optically clear silicone potting and encapsulating compound with a low viscosity and easy 1:1 ratio system. 20-1625 is formulated without solvents or other toxic materials and provides good heat resistance and is flame retardant. view less | |
| Epoxies® 20-1634 | Epoxies, Etc. | Epoxies® 20-1634 is a low density, light weight, silicone potting and encapsulating compound. It utilizes an advanced micro balloon technology filler that is ideal for applications which require low weight, flexibility, high heat resistance, and excellent...view more Epoxies® 20-1634 is a low density, light weight, silicone potting and encapsulating compound. It utilizes an advanced micro balloon technology filler that is ideal for applications which require low weight, flexibility, high heat resistance, and excellent electrical insulation properties. 20-1634 is formulated without solvents or other toxic materials. As a result, no by-products are released during the cure process and it is safe to handle. view less | |
| Epoxies® 20-1640 | Epoxies, Etc. | Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive comp...view more Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive components. Due to its low stress during and after cure, this material will not crush or damage delicate components. 20-1640 is formulated without solvents or other toxic materials. As a result, no by-products released during cure and safe to handle. view less | |
| Epoxies® 20-1650 | Epoxies, Etc. | Epoxies® 20-1650 is a two part high temperature silicone potting and encapsulating compound and is formulated with iron oxide to impart increased stability at elevated temperatures. It can be used for potting or encapsulating electronic packages that have...view more Epoxies® 20-1650 is a two part high temperature silicone potting and encapsulating compound and is formulated with iron oxide to impart increased stability at elevated temperatures. It can be used for potting or encapsulating electronic packages that have sensitive components. This material will not crush or damage delicate components due to its low stress during and after the curing process. 20-1650 is made without solvents or other toxic materials. As a result, no by-products are released during curing process and is safe to handle. view less | |
| Epoxies® 20-1700 | Epoxies, Etc. | Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protec...view more Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1700 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. view less | |
| Epoxies® 20-1705 | Epoxies, Etc. | Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide prot...view more Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1705 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. view less | |
| Epoxies® 20-1710 | Epoxies, Etc. | Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...view more Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1710 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. view less | |
| Epoxies® 20-1715 | Epoxies, Etc. | Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...view more Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1715 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. view less | |
| Epoxies® 20-2028 | Epoxies, Etc. | Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safe...view more Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safer to use since it does not utilize MOCA or TDI. 20-2028 has been formulated for ease in handling with a convenient 1:1 mix ratio, low viscosity, and short demolding time. view less | |
| Epoxies® 20-2101 | Epoxies, Etc. | Epoxies® 20-2101 is a clear two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...view more Epoxies® 20-2101 is a clear two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. view less | |
| Epoxies® 20-2121 | Epoxies, Etc. | Epoxies® is a clear to amber colored elastomeric potting and encapsulating compound made of polyurethane. Specifically formulated for electronic potting, encapsulating and casting applications, it is a two-component, low viscosity, room temperature curing...view more Epoxies® is a clear to amber colored elastomeric potting and encapsulating compound made of polyurethane. Specifically formulated for electronic potting, encapsulating and casting applications, it is a two-component, low viscosity, room temperature curing system that does not contain TDI, MbOCA or Mercury. 20-2121 can be used to cushion and protect sensitive electronic components and will impart very little stress on components during cure or thermal cycling. view less | |
| Epoxies® 20-2160 | Epoxies, Etc. | Epoxies® 20-2160 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...view more Epoxies® 20-2160 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. view less | |
| Epoxies® 20-2180 | Epoxies, Etc. | Epoxies® 20-2180 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...view more Epoxies® 20-2180 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. view less | |
| Epoxies® 20-2330 | Epoxies, Etc. | Epoxies® 20-2330 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...view more Epoxies® 20-2330 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2330 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. view less | |
| Epoxies® 20-2345 | Epoxies, Etc. | Epoxies® 20-2345 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...view more Epoxies® 20-2345 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2345 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. view less | |
| Epoxies® 20-2362 FR | Epoxies, Etc. | Epoxies® 20-2362 FR is a two part, potting and encapsulating compound that has been formulated to meet the stringent non-burning requirements of UL-94 V-0. This system offers a unique combination of properties. 20-2362 is very low in viscosity, flame reta...view more Epoxies® 20-2362 FR is a two part, potting and encapsulating compound that has been formulated to meet the stringent non-burning requirements of UL-94 V-0. This system offers a unique combination of properties. 20-2362 is very low in viscosity, flame retardant, has a glass transition temperature of -72°C, and has low moisture permeability. This product forms a soft elastomer that will cushion and protect sensitive electronic components. view less | |
| Epoxies® 20-2370 | Epoxies, Etc. | Epoxies® 20-2370 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...view more Epoxies® 20-2370 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2370 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. view less | |
| Epoxies® 20-2390 | Epoxies, Etc. | Epoxies® 20-2390 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...view more Epoxies® 20-2390 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2390 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. view less | |
| Epoxies® 20-2521 | Epoxies, Etc. | Epoxies® 20-2521 is a black, two part, polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cy...view more Epoxies® 20-2521 is a black, two part, polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cycle. Epoxies® 20-2521 is also well known for its outstanding thermal shock and excellent dielectric properties. It is also a good choice when exposure to salt water, mild acids and bases, and aliphatic hydrocarbons is expected. view less | |
| Epoxies® 20-2523 | Epoxies, Etc. | Epoxies® 20-2523 is a black, two part, high performance polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throu...view more Epoxies® 20-2523 is a black, two part, high performance polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cycle. Epoxies® 20-2521 is also well known for its outstanding thermal shock and excellent dielectric properties. It is also a good choice when exposure to salt water, mild acids and bases, and aliphatic hydrocarbons is expected. view less | |
| Epoxies® 20-2621 | Epoxies, Etc. | Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environm...view more Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environmental protection. 20-2621 is semi-flexible and will not place excess stress on electronic components. It also has a low viscosity, which facilitates easy flow and penetration into difficult areas. view less | |
| Epoxies® 20-3001 NC | Epoxies, Etc. | Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it ...view more Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it is an ideal material for meter mixes and dispense equipment. view less | |
| Epoxies® 20-3004 HV | Epoxies, Etc. | Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...view more Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. view less |
