UL Prospector
Prospector

Success!

Successfully saved your search
21 Results
AGOCEL® AC 1115 CHT USA (formerly ICM) AGOCEL® AC 1115 is a hydrocolloid for water-based paints and synthetic resin plasters. It is a beige, fine powder. Request Sample
AGOCEL® AC 1147 CHT USA (formerly ICM) AGOCEL® AC 1147 is a rheology additive for architectural latex-based paints. It is an off-white powder. Request Sample
AGOCEL® AC 1155 CHT USA (formerly ICM) AGOCEL® AC 1155 is a hydrocolloid for water-based paints and synthetic resin plasters. It is a beige, fine powder. Request Sample
AGOCEL® AC 2200 CHT USA (formerly ICM) AGOCEL® AC 2200 is a water-soluble polymer for controlling the required amount of water and rheology in mineral binder systems. It is a fine, white powder. Request Sample
AGOCEL® AC 2530 CHT USA (formerly ICM) AGOCEL® AC 2530 is a water-soluble polymer for controlling the required amount of water and rheology in mineral binder systems. It is a fine, white powder. Request Sample
AGOCEL® AC 3900 CHT USA (formerly ICM) AGOCEL® AC 3900 is a thickener and retention agent for mineral building material systems. It is a beige, fine powder. Request Sample
AGOCEL® AC 4100 CHT USA (formerly ICM) AGOCEL® AC 4100 is a rheology modifier for dry mix mortars. It is a whitish powder. Request Sample
AGOCEL® AC 5500 CHT USA (formerly ICM) AGOCEL® AC 5500 is a stabilizer and rheological additive for aqueous mineral building material systems. It is a beige powder. Request Sample
AGOCEL® AC 5600 CHT USA (formerly ICM) AGOCEL® AC 5600 is a stabilizer and rheological additive for silicate-based painting systems. It is a beige powder. Request Sample
Melafine® OCI MELAMINE Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...view more Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. view less
MelaminebyOCI™ GPH OCI MELAMINE MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...view more MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less
MelaminebyOCI™ GPH-LD OCI MELAMINE MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...view more MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. view less
MelaminebyOCI™ SLP OCI MELAMINE MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...view more MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less
VARIPHOB CC 1216 CHT USA (formerly ICM) VARIPHOB CC 1216 is a surfactant-free microemulsion of a unique amino-functional polysiloxane and special additives. After drying, it leaves a transparent and cross-linked hydrophobic film. Request Sample
VARIPHOB® CC 4107 CHT USA (formerly ICM) VARIPHOB® CC 4107 is a water-repellent agent for the protection of mineral-based construction materials. Request Sample
VARIPHOB CC 4108 CHT USA (formerly ICM) VARIPHOB CC 4108 is a 45% active silicone/saline emulsion that can be diluted with water to achieve the desired solids for treatment. Due to its specialized formulation, VARIPHOP CC 4108 penetrates into absorbent surfaces as an impregnation and can also b...view more VARIPHOB CC 4108 is a 45% active silicone/saline emulsion that can be diluted with water to achieve the desired solids for treatment. Due to its specialized formulation, VARIPHOP CC 4108 penetrates into absorbent surfaces as an impregnation and can also be used in fresh mortar concrete admixtures. view less Request Sample
VARIPHOB® CC 4140 CHT USA (formerly ICM) VARIPHOB® CC 4140 is a water-repellent agent for the protection of mineral-based construction materials. It is a milky, white liquid. Request Sample
VARIPHOB® CC 4170 CHT USA (formerly ICM) VARIPHOB® CC 4170 is a water-repellent agent for the protection of mineral-based construction materials. It is a clear liquid. Request Sample
VARIPHOB® CC 4272 CHT USA (formerly ICM) VARIPHOB® CC 4272 is a water-repellent agent for the protection of mineral-based construction materials. It is a white cream. Request Sample
VARIPHOB® CC 6372 CHT USA (formerly ICM) VARIPHOB® CC 6372 is a water-repellent agent for the protection of mineral-based construction materials. It is a milky, white liquid. Request Sample
VARIPHOB® CC 6373 CHT USA (formerly ICM) VARIPHOB® CC 6373 is a water-repellent agent for the protection of mineral-based construction materials. It is a milky, white liquid. Request Sample