| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...view more 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. view less | |
| AEPD® VOX 1000 | ANGUS Chemical Company | AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply...view more AEPD® VOX 1000 Neutralizing Amine is a multifunctional additive for low-odor, low-VOC interior water-based paints. Its very mild odor, high boiling point and low vapor pressure make it the ideal formulating tool for those paint producers needing to comply with EU directive 2004/42/EC. Compared with other neutralizing amines, AEPD® VOX 1000 Neutralizing Amine offers one of the best all-round performances when taking odor, VOC, wet paint and dry film properties into account. view less | |
| ALKATERGE®-T | ANGUS Chemical Company | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | |
| Allyl Pentaerythritol | Perstorp | Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners. | |
| AMP® | ANGUS Chemical Company | AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This pro...view more AMP® Neutralizing Amine is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. As a pigment co-dispersant, it provides numerous benefits throughout the life cycle of a latex paint, and is the only US EPA VOC-exempt amine. This product also has a wide variety of uses in water-borne and solvent-borne coatings, boiler-water systems, metalworking fluids, and polyethylene and wax emulsions. view less | |
| AMP-95® | ANGUS Chemical Company | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...view more AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. view less | |
| AVANTANE® PA 4000 | ANGUS Chemical Company | AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive qu...view more AVANTANE® PA 4000 is an additive specifically designed to meet the performance requirements encountered in solvent-based rotogravure and flexographic printing. It is a versatile component for formulating inks and thinners, and makes possible impressive quality-related improvements to many of the frequently encountered problems during printing operations. When AVANTANE® PA 4000 is used either as a component of the press-side thinner or in the ink formulation, press output can be increased, which results in even further operational economies. view less | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| BEPD 70L | Perstorp | BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...view more BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. view less | |
| Bis-MPA™ | Perstorp | Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications. | |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...view more Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. view less | |
| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...view more Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. view less | |
| Boltorn™ P500 | Perstorp | Boltorn™ P500 is a clear liquid dendritic polyester/ether polyol blend with low viscosity. This product is a precursor for UV-curing acrylate oligomers with a relationship between viscosity, molecular weight and functionality. Boltorn™ P500 offers balance...view more Boltorn™ P500 is a clear liquid dendritic polyester/ether polyol blend with low viscosity. This product is a precursor for UV-curing acrylate oligomers with a relationship between viscosity, molecular weight and functionality. Boltorn™ P500 offers balance between hardness and flexibility in plastic and protective hard coating applications. view less | |
| Boltorn™ P501 | Perstorp | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...view more Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. view less | |
| Boltorn™ U3000 | Perstorp | Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comp...view more Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comply with recent VOC demands while still securing rapid drying and durability. view less | |
| Boltorn™ W3000 | Perstorp | Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W...view more Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W3000 modified paint possesses strong drying, hardness, gloss and chemical resistance. This product is used in alkyds, polyesters and pigment applications. view less | |
| Charmor™ DP15 | Perstorp | Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as c...view more Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as carbon source for halogen free systems demanding lower smoke release rate and non-toxic fumes. view less | |
| Charmor™ DP40 | Perstorp | Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon ...view more Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ Pro PM40 C40 | Perstorp | Charmor™ Pro PM40 is a Pro-Environment Polyol ready to be dropped into existing formulations. Based on the mass balance concept, Charmor™ Pro PM40 C40 is a partly renewable Charmor™ PM40 product designed to reduce the carbon footprint and support the sust...view more Charmor™ Pro PM40 is a Pro-Environment Polyol ready to be dropped into existing formulations. Based on the mass balance concept, Charmor™ Pro PM40 C40 is a partly renewable Charmor™ PM40 product designed to reduce the carbon footprint and support the sustainable sourcing of renewable raw materials. Charmor™ Pro PM40 is third-party certified according to the ISCC system which means we have both traceability back to the country of origin ensuring the biomass was sourced in a sustainable way as well as a certified mass balance. view less | |
| Charmor™ Pro PT40 C40 | Perstorp | Charmor™ Pro PT40 is a Pro-Environment Polyol ready to be dropped into existing formulations. Based on the mass balance concept, Charmor™ Pro PT40 C40 is a partly renewable Charmor™ PT40 product is designed to reduce the carbon footprint and supports sust...view more Charmor™ Pro PT40 is a Pro-Environment Polyol ready to be dropped into existing formulations. Based on the mass balance concept, Charmor™ Pro PT40 C40 is a partly renewable Charmor™ PT40 product is designed to reduce the carbon footprint and supports sustainable sourcing of renewable raw materials. Charmor™ Pro PT40 is third-party certified according to the ISCC system which means we have both traceability back to the country of origin ensuring the biomass was sourced in a sustainable way as well as a certified mass balance. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| Curalite™ Ox | Perstorp | Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins a...view more Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins and increases through cure and chemical resistance of the formulation. Curalite™ Ox is suitable for all types of cationic UV printing inks and overprint varnishes both for metal and plastic substrates. view less | |
| Curalite™ OxPlus | Perstorp | Curalite™ OxPlus is a clear colourless liquid. It is used as a reactive diluent for cationic radiation curing. | |
| Cyclic Trimethylolpropane Formal | Perstorp | Cyclic Trimethylolpropane Formal (CTF) is a cycloaliphatic monofunctional alcohol. It is a clear colorless liquid. CTF is used in acrylic acid esters for radiation curing and in fatty acid esters in synthetic lubricants | |
| Di-Penta 80 | Perstorp | Di-Penta 80 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 80 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 80%. view less | |
| Di-Penta 90 | Perstorp | Di-Penta 90 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 90 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 90%. view less | |
| Di-Penta 93 | Perstorp | Di-Penta 93 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly...view more Di-Penta 93 is a high purity di-pentaerythritol that improves properties in radiation curing monomers, synthetic lubricants and high solids alkyds. This product is a white crystalline material that is often a raw material for many environmentally friendly applications. It has a minimum di-pentaerythritol content of 92%. view less | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company | FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE®...view more FLEXITANE® CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When FLEXITANE® CA 6000 is used in solvent-based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. This includes enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less | |
| Glycerine Tech | Perstorp | Glycerine Tech is a yellow liquid based on rapeseed oil. This product was developed for markets that require low ash and low water content. It is used in alkd resins and industrial coating applications. | |
| Methanol | Perstorp | Methanol is a volatile, clear fluid with a faint odor. Methanol is used as solvent and diluent and as raw material in the synthesis of formaldehyde and methyl acetate in industrial coating applications. | |
| Methyl Propanediol | Perstorp | Methyl Propanediol is a clear colorless liquid that is used in saturated and unsaturated polyesters for powder coatings, coil coatings and other stoving enamels. | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| Neopentyl Glycol 90 | Perstorp | Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
| Neopentyl Glycol Flakes | Perstorp | Neopentyl Glycol Flakes are a white, crystalline variation of Neopentyl Glycol. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
| Neopentyl Glycol Molten | Perstorp | Neopentyl Glycol Molten is a variation of Neopentyl Glycol that is in liquid form at high temperatures. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats. | |
| NIKANE® MS 3000 | ANGUS Chemical Company | NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent...view more NIKANE® MS 3000 is a multifunctional solvent that will offer differentiated performance attributes that are useful in formulating solvent-based reducers or thinners for many types of industrial coating systems. While NIKANE® MS 3000 is a versatile solvent that has been designed for use with a wide variety of other solvents, it is of particular value in formulations as a replacement for a portion of active solvents such as methyl isobutyl ketone (MIBK) or acetates (n-butyl acetate, etc.). view less | |
| NIKANE® MS 5000 | ANGUS Chemical Company | NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirab...view more NIKANE® MS 5000 is a multifunctional solvent that provides unique performance in solvent-based systems. Not only does it readily dissolve a wide range of materials, it also can impart properties to the resulting solutions that make its utilization desirable, if not essential, in many applications. view less | |
| NX 795 | Perstorp | NX 795 is a clear, colorless liquid ester alcohol used as a coalescing agent for aqueous dispersions. This product is used in decorative and industrial coatings. | |
| Oxymer™ HD112 | Perstorp | Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinker...view more Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. view less | |
| Oxymer™ HD56 | Perstorp | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...view more Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. view less | |
| Oxymer™ M112 | Perstorp | Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy ben...view more Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy beneficial for good wetting characteristics and provides a high hardness characteristic. view less | |
| Penta EXCETEQ™ | Perstorp | Penta EXCETEQ™ is pentaerythritol with high di-penta content. | |
| Pentaerythritol Mono | Perstorp | Pentaerythritol Mono is a white, crystalline polyhydric alcohol containing four primary hydroxyl groups. Applications include alkyd resins, radiation curing monomers, polyurethanes, rosin esters, and latex paints. | |
| Pentaerythritol mono | Perstorp | Pentaerythritol mono (Penta) is a white crystalline polyhydric alcohol containing four primary hydroxyl groups. Applications are building block in Alkyd resins, radiation curing monomers, polyurethanes, rosin esters and synthetic lubricants. | |
| Phthalic Anhydride Flakes | Perstorp | Phthalic Anhydride Flakes are an intermediate used in the production of unsaturated polyester resins and alkyd resins used in the coatings industry. | |
| Phthalic Anhydride Molten | Perstorp | Phthalic Anhydride Molten is an important intermediate in the form of a colorless melt. It is used in many products including applications in the coatings industry. | |
| Polyol 3165 | Perstorp | Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component...view more Polyol 3165 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 1010g/mole and is also used as a component for waterborne polymers, and can be used in paint additives. view less | |
| Polyol 3380 | Perstorp | Polyol 3380 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 440g/mole. | |
| Polyol 3610 | Perstorp | Polyol 3610 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 280g/mole and is also used as a component ...view more Polyol 3610 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 280g/mole and is also used as a component in waterborne polymers. view less | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol 3990 | Perstorp | Polyol 3990 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 170g/mole and is also used as a component ...view more Polyol 3990 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a molecular weight of 170g/mole and is also used as a component in waterborne polymers. view less | |
| Polyol 4290 | Perstorp | Polyol 4290 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4290 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4360 | Perstorp | Polyol 4360 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4360 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4525 | Perstorp | Polyol 4525 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4525 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4640 | Perstorp | Polyol 4640 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4640 is also used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol PX | Perstorp | Polyol PX is a mixture of polyhydric alcohols. It is a solid amorphous material used as chemical building block and in liquid phenolic resins. | |
| Polyol PX 70 | Perstorp | Polyol PX 70 Polyol PX 70 is a mixture of polyhydric alcohols. It is liquid solution with 70 % Polyol PX in water. Polyol PX is used as chemical building block and in liquid phenolic resins in paints, resins, and polishes. | |
| Polyol R2490 | Perstorp | Polyol R2490 is a difunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. Polyol R2490 is also used as a chemical building block and as crosslinker in polyurethanes. | |
| Polyol R3430 | Perstorp | Polyol R3430 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3530 | Perstorp | Polyol R3530 is a trifunctional liquid polyol with secondary OH-groups, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3540 | Perstorp | Polyol R3540 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3600 | Perstorp | Polyol R3600 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4630 | Perstorp | Polyol R4630 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4631 | Perstorp | Polyol R4631 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R6405 | Perstorp | Polyol R6405 is a hexafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| Propionic Acid | Perstorp | Propionic Acid has one carboxylic group. It is a colorless liquid. Propionic acid is used in feed and food for preservation as free acid or as sodium/calcium salts. In these applications the Propionic Acid is active as a powerful Mould Inhibitor. Other ar...view more Propionic Acid has one carboxylic group. It is a colorless liquid. Propionic acid is used in feed and food for preservation as free acid or as sodium/calcium salts. In these applications the Propionic Acid is active as a powerful Mould Inhibitor. Other areas are ester solvents, pharmaceutical intermediates, herbicides, synthetic flavors and fragrances. view less | |
| Trimethylolpropane Diallyl Ether 80 | Perstorp | Trimethylolpropane Diallyl Ether 80 is mainly used in unsaturated polyesters for direct gloss coatings. Allyl Ethers contains both allyl groups and hydroxyl groups. | |
| Trimethylolpropane Diallyl Ether 90 | Perstorp | Trimethylolpropane Diallyl Ether 90 is mainly used in unsaturated polyesters for direct gloss coatings. Allyl Ethers contains both allyl groups and hydroxyl groups. | |
| Trimethylolpropane Flakes | Perstorp | Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, ros...view more Trimethylolpropane Flakes are a white, crystalline, flake material used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Molten | Perstorp | Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for sy...view more Trimethylolpropane Molten is supplied in liquid form at high temperature. This product is used in saturated polyesters for coil coatings, alkyds for paints, polyurethanes for coatings and elastomers, acrylic acid esters for radiation curing, esters for synthetic lubricants, rosin esters, surface treatment of pigments, and adhesive applications. view less | |
| Trimethylolpropane Monoallyl Ether | Perstorp | Trimethylolpropane Monoallyl Ether (TMPME) is mainly used used as a crosslinker in automotive coatings and in Silicon chemistry. | |
| Voxtar™ D100 | Perstorp | Voxtar™ D100 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D100 is based on 100%...view more Voxtar™ D100 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D100 is based on 100% renewable materials and is used in UV-curable resins and monomers, synthetic lubricants, and liquid alkyd and polyester resins. view less | |
| Voxtar™ D50 | Perstorp | Voxtar™ D50 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D50 is based on 40% ren...view more Voxtar™ D50 is a functional polyol with six primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 222 °C. Voxtar™ D50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, and liquid alkyd and polyester resins. view less | |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100...view more Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% re...view more Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100%...view more Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% re...view more Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. view less | |
| Ymer™ N120 | Perstorp | Ymer™ N120 is a polymeric, nonionic dispersing monomer chemical intermediate. This product is a white amorphous material used in waterborne resins systems, polyurethane dispersions, hydrophilic PU-systems, and surfactants. | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company | ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials use...view more ZOLDINE® MS-PLUS Moisture Scavenger is a fast reacting, low viscosity oxazolidine-based moisture scavenger for use in polyurethane and polyurea coatings, sealants and elastomers. It will safely and effectively eliminate moisture from the raw materials used in most polyurethane and polyurea systems. This product will also alleviate the detrimental effects of humidity in the cast or spray application of two-component polyurethane and polyurea systems. view less |
