DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...view more DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100M | AlzChem AG | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...view more DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...view more DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. view less | |
DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...view more DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. view less | |
DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...view more DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. view less | |
DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...view more DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. view less | |
DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...view more DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...view more DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. view less | |
DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...view more DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. view less | |
SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...view more SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. view less | |
Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
VINAVIL® 03V | VINAVIL Americas Corp. | VINAVIL® 03V, in the form of a transparent, bright film, is a vinyl acetate-veova copolymer emulsion that has been stabilized with anionic surfactants, which can be used in indoor water-based paints, outdoor emulsion paints, wall textured coatings, wall p...view more VINAVIL® 03V, in the form of a transparent, bright film, is a vinyl acetate-veova copolymer emulsion that has been stabilized with anionic surfactants, which can be used in indoor water-based paints, outdoor emulsion paints, wall textured coatings, wall primers, and grit plastic coatings. This product is resistant to light exposure. view less | |
VINAVIL® 2154L | VINAVIL Americas Corp. | VINAVIL® 2154L, in the form of a semi-opaque film, is a polyvinyl acetate water dispersion supplied with 55% solids that can be used as a wood, paper or cardboard adhesive. It can also be used in building adhesives or paints and coatings. This product has...view more VINAVIL® 2154L, in the form of a semi-opaque film, is a polyvinyl acetate water dispersion supplied with 55% solids that can be used as a wood, paper or cardboard adhesive. It can also be used in building adhesives or paints and coatings. This product has a low viscosity and will make adhesives with a good setting time and a high wet tack development. view less | |
VINAVIL® 2155L | VINAVIL Americas Corp. | VINAVIL® 2155L, in the form of a semi-opaque film, is a vinyl acetate homopolymer emulsion containing 55% solids that can be used as a wood adhesive. It can also be used in building adhesives or paints and coatings. This product is a low-viscosity emulsio...view more VINAVIL® 2155L, in the form of a semi-opaque film, is a vinyl acetate homopolymer emulsion containing 55% solids that can be used as a wood adhesive. It can also be used in building adhesives or paints and coatings. This product is a low-viscosity emulsion with high solids. Its density (kg/L) is 1.09. view less | |
VINAVIL® 2155LB | VINAVIL Americas Corp. | VINAVIL® 2155LB, in the form of a semi-opaque film, is a vinyl acetate homopolymer emulsion containing 55% solids that can be used as a wood or packaging adhesive. It can also be used in building adhesives or paints and coatings. This product contains hi...view more VINAVIL® 2155LB, in the form of a semi-opaque film, is a vinyl acetate homopolymer emulsion containing 55% solids that can be used as a wood or packaging adhesive. It can also be used in building adhesives or paints and coatings. This product contains high solids in a low viscosity form. Its density, in kg/L is 1.09. view less | |
VINAVIL® 2247L | VINAVIL Americas Corp. | VINAVIL® 2247L, in the form of a flexible and non-tacky, semi-opaque film, is a low-viscosity vinyl acetate polymer emulsion. This product can be used as an adhesives for hard woods like maple or oak, and can be used as is or mixed with other additives. ...view more VINAVIL® 2247L, in the form of a flexible and non-tacky, semi-opaque film, is a low-viscosity vinyl acetate polymer emulsion. This product can be used as an adhesives for hard woods like maple or oak, and can be used as is or mixed with other additives. It is specially formulated to avoid black stains when used on woods with high tannin content. view less | |
VINAVIL® 2250L | VINAVIL Americas Corp. | VINAVIL® 2250L, in the form of an opaque film, is a polyvinyl acetate polymer emulsion containing 50% solids that can be used as a water-resistant wood adhesive. This product features good water resistance, high strength at high temperatures, good creep ...view more VINAVIL® 2250L, in the form of an opaque film, is a polyvinyl acetate polymer emulsion containing 50% solids that can be used as a water-resistant wood adhesive. This product features good water resistance, high strength at high temperatures, good creep resistance, and good setting time. It is particularly designed for applications where water resistance of bonded joints is required. view less | |
VINAVIL® 2252L | VINAVIL Americas Corp. | VINAVIL® 2252L, in the form of an opaque film, is a low-viscosity polyvinyl acetate polymer emulsion containing 52% solids that can be used as a water-resistant wood adhesive. This product offers high strength at high temperatures, good creep resistance,...view more VINAVIL® 2252L, in the form of an opaque film, is a low-viscosity polyvinyl acetate polymer emulsion containing 52% solids that can be used as a water-resistant wood adhesive. This product offers high strength at high temperatures, good creep resistance, and a good setting time. It should be used in applications when water-resistance of the bonded joints is required. view less | |
VINAVIL® 2252M | VINAVIL Americas Corp. | VINAVIL® 2252M, in the form of an opaque film, is a medium-viscosity polyvinyl acetate polymer emulsion containing 52% solids that should be used as a water-resistant wood adhesive. This product offers good creep resistance, high strength at high tempera...view more VINAVIL® 2252M, in the form of an opaque film, is a medium-viscosity polyvinyl acetate polymer emulsion containing 52% solids that should be used as a water-resistant wood adhesive. This product offers good creep resistance, high strength at high temperatures, and a good setting time. It should be used in applications where water-resistance of the bonded joints is required. After application, those joints would show good heat and static loading resistance. view less | |
VINAVIL® 2351L | VINAVIL Americas Corp. | VINAVIL® 2351L is a plasticized vinyl acetate homopolymer emulsion containing 52% solids that can be used as a paper or cardboard adhesive. It can also be used as a building adhesive. This product comes in a low-viscosity form and dries quickly. It is e...view more VINAVIL® 2351L is a plasticized vinyl acetate homopolymer emulsion containing 52% solids that can be used as a paper or cardboard adhesive. It can also be used as a building adhesive. This product comes in a low-viscosity form and dries quickly. It is easy to clean up. view less | |
VINAVIL® 2401 | VINAVIL Americas Corp. | VINAVIL® 2401, in the form of a transparent, clear, flexible and slightly sticky film, is an anionic/non-ionic copolymer emulsion based on vinyl acrylic that can be used in wool insulation adhesives, flooring adhesives, and paper external adhesion applica...view more VINAVIL® 2401, in the form of a transparent, clear, flexible and slightly sticky film, is an anionic/non-ionic copolymer emulsion based on vinyl acrylic that can be used in wool insulation adhesives, flooring adhesives, and paper external adhesion applications. This product is compatible with organic resins in the adhesive industry. It offers a good balance of shear strength and good adhesion on aluminum. view less | |
VINAVIL® 2405 | VINAVIL Americas Corp. | VINAVIL® 2405, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers a high gloss and dries very quickly. It can also be used in flooring adhesi...view more VINAVIL® 2405, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers a high gloss and dries very quickly. It can also be used in flooring adhesives. view less | |
VINAVIL® 2414 | VINAVIL Americas Corp. | VINAVIL® 2414, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers high gloss and dries very quickly. It can also be used as a flooring adhesi...view more VINAVIL® 2414, in the form of a transparent film, is a vinyl acrylic emulsion that can be used as an adhesive for coated paper, cardboard, or recycled paper. This product offers high gloss and dries very quickly. It can also be used as a flooring adhesive. view less | |
VINAVIL® 2419 | VINAVIL Americas Corp. | VINAVIL® 2419, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product can also be used in flooring adhesives and interior or...view more VINAVIL® 2419, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product can also be used in flooring adhesives and interior or exterior emulsion paints and coatings. It is compatible with organic resins that can be used in the formation of adhesives and shows good balance of shear strength and residual tack. view less | |
VINAVIL® 2429 | VINAVIL Americas Corp. | VINAVIL® 2429, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic emulsion that can be used in pressure-sensitive adhesive applications. It can also be used in interior or exterior emulsion paints and coatings. This product ...view more VINAVIL® 2429, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic emulsion that can be used in pressure-sensitive adhesive applications. It can also be used in interior or exterior emulsion paints and coatings. This product is compatible with organic resins and shows good balance of shear strength and residual tack. view less | |
VINAVIL® 2431 | VINAVIL Americas Corp. | VINAVIL® 2431, in the form of a transparent, clear, flexible and tacky film, is an anionic/nonionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive adhesives, especially in flooring applications. This product is compatible with ...view more VINAVIL® 2431, in the form of a transparent, clear, flexible and tacky film, is an anionic/nonionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive adhesives, especially in flooring applications. This product is compatible with organic resins and shows good balance of shear strength and residual tack. view less | |
VINAVIL® 2433 | VINAVIL Americas Corp. | VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and work...view more VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and works best with non-polar surfaces such as polypropylene or polyethylene. This product can be used both for permanent and temporary labeling applications. view less | |
VINAVIL® 2440 | VINAVIL Americas Corp. | VINAVIL® 2440, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product is compatible with organic resins. It has good peel a...view more VINAVIL® 2440, in the form of a transparent, tacky film, is an anionic/non-ionic vinyl/acrylic copolymer emulsion that can be used in pressure-sensitive, cement base and vinyl adhesives. This product is compatible with organic resins. It has good peel and tack properties as well as good shear strength. VINAVIL® 2440 can also be used in interior or exterior emulsion paints and coatings. view less | |
VINAVIL® 2839 | VINAVIL Americas Corp. | VINAVIL® 2839, in the form of a clear, tacky film, is an anionic acrylic emulsion that can be used in pressure-sensitive adhesives. This product has a good balance between shear and peel resistance, and can be applied on various substrates. | |
VINAVIL® 2841 | VINAVIL Americas Corp. | VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for film...view more VINAVIL® 2841, in the form of a transparent film with high tack and good UV resistance, is an anionic acrylic polymer emulsion with high peel adhesion. The emulsion contains high solids and can be used in pressure-sensitive water-based adhesives for films, double-sided tapes, foams, textiles and labels. It can also be used in floor adhesives and in textile screen printing applications. This product coats well on silicone-coated release paper. view less | |
VINAVIL® 3525 | VINAVIL Americas Corp. | VINAVIL® 3525, in the form of a semi-opaque, flexible, and non-tacky film, is a vinyl acetate/vinyl versatate copolymer emulsion that can be used in paper coatings and as a co-binder in the production of ink-jet printers. It can also be used in interior ...view more VINAVIL® 3525, in the form of a semi-opaque, flexible, and non-tacky film, is a vinyl acetate/vinyl versatate copolymer emulsion that can be used in paper coatings and as a co-binder in the production of ink-jet printers. It can also be used in interior or exterior emulsion paints and glossy emulsion paints. The vinyl versatate in this product increases water resistance and alkaline deterioration. view less | |
VINAVIL® 3721 | VINAVIL Americas Corp. | VINAVIL® 3701, in the form of a transparent, flexible and non-tacky emulsion, is a styrene acrylic copolymer that can be used as a waterproof coating and vapor barrier in the paper industry. This product also has good shear resistance. | |
VINAVIL® 4418T | VINAVIL Americas Corp. | VINAVIL® 4418T, in the form of a transparent, clear film, is an anionic/non-ionic vinyl acetate/vinyl versatate/acrylic terpolymer emulsion that can be used in semi-gloss or mat interior or exterior paints. This product has a high binding power with good...view more VINAVIL® 4418T, in the form of a transparent, clear film, is an anionic/non-ionic vinyl acetate/vinyl versatate/acrylic terpolymer emulsion that can be used in semi-gloss or mat interior or exterior paints. This product has a high binding power with good scrub resistance at a very high PVC. It also has strong UV-resistance. view less | |
VINAVIL® 4711 | VINAVIL Americas Corp. | VINAVIL® 4711, in the form of a transparent, clear, and flexible emulsion, is a water-based styrene/acrylic copolymer that can be used in water-based paints and in wood coatings. After this product dries, the end result will be a transparent, flexible, a...view more VINAVIL® 4711, in the form of a transparent, clear, and flexible emulsion, is a water-based styrene/acrylic copolymer that can be used in water-based paints and in wood coatings. After this product dries, the end result will be a transparent, flexible, and non-tacky film. It is compatible with any paint additive in the market and offers good water-resistance properties. view less | |
VINAVIL® 4723 | VINAVIL Americas Corp. | VINAVIL® 4723, in the form of a transparent, bright, flexible and non-tacky emulsion, is a styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product has compatibility with any p...view more VINAVIL® 4723, in the form of a transparent, bright, flexible and non-tacky emulsion, is a styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product has compatibility with any paint additive on the market. Its density in kg/L is 1.01. view less | |
VINAVIL® 4723NA | VINAVIL Americas Corp. | VINAVIL® 4723NA, in the form of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product is co...view more VINAVIL® 4723NA, in the form of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene/acrylic copolymer that can be used in water-based paints and primers. It can also be used in flooring adhesives. This product is compatible with any paint additive in the market. view less | |
VINAVIL® 4723NA (DS) | VINAVIL Americas Corp. | VINAVIL® 4723NA (DS), in the aspect of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene-acrylic copolymer that can be used in water-based paints, primers, and flooring adhesives. This product has compatibility wi...view more VINAVIL® 4723NA (DS), in the aspect of a transparent, bright, flexible and non-tacky emulsion, is an anionic or non-ionic styrene-acrylic copolymer that can be used in water-based paints, primers, and flooring adhesives. This product has compatibility with any paint additive found on the market. view less | |
VINAVIL® 4724S | VINAVIL Americas Corp. | VINAVIL® 4724S, in the form of a transparent, flexible and non-tacky emulsion, is a styrene/acrylic copolymer that can be used as a base in paste adhesives for interior ceramic tile coverings, in paints and coatings, and as a mixture base for the manufact...view more VINAVIL® 4724S, in the form of a transparent, flexible and non-tacky emulsion, is a styrene/acrylic copolymer that can be used as a base in paste adhesives for interior ceramic tile coverings, in paints and coatings, and as a mixture base for the manufacturing of adhesives for PVC floor and wall coverings. It can also be used as a carpet backing adhesive. This product is water-resistant. view less | |
VINAVIL® 4735 | VINAVIL Americas Corp. | VINAVIL® 4735, in the form of a transparent, flexible, soft and tacky film, is an anionic/non-ionic styrene/acrylic copolymer emulsion that can be used in elastomeric indoor and outdoor coatings, cementitious adhesives with enhanced properties including w...view more VINAVIL® 4735, in the form of a transparent, flexible, soft and tacky film, is an anionic/non-ionic styrene/acrylic copolymer emulsion that can be used in elastomeric indoor and outdoor coatings, cementitious adhesives with enhanced properties including waterproofing, and in laminating applications or applications requiring pressure-sensitive adhesives, among other uses. view less | |
VINAVIL® 4830 | VINAVIL Americas Corp. | VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), ...view more VINAVIL® 4830 is a water-based acrylic dispersion that can be used in high gloss emulsion paints, enamels for wall, metal and wood substrates, clear varnishes, and stains, among other uses. This product is free from alkyl phenol ethoxylates (APEO-free), formaldehyde, plasticizers and coalescing agents. The end product will have high gloss, blocking resistance, chemical and mechanical resistance, and good wet/dry adhesion. view less | |
VINAVIL® 5406P | VINAVIL Americas Corp. | VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is part...view more VINAVIL® 5406P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/vinyl versatate/acrylic ester in a polyvinyl alcohol colloid that can be used in adhesive mortar, plaster and exterior insulation finish systems. This product is particularly recommended in the formation of gypsum plasters. The colloid will increase the water-resistance, flexural strength, and mechanical resistance of finished products. view less | |
VINAVIL® 5424 | VINAVIL Americas Corp. | VINAVIL® 5424, in the form of a transparent, clear, flexible and tacky film, is an anionic/non-ionic copolymer emulsion based on vinyl/acrylic that can be used in wool insulation adhesives, self-adhesive coatings, flooring adhesives, and interior or exter...view more VINAVIL® 5424, in the form of a transparent, clear, flexible and tacky film, is an anionic/non-ionic copolymer emulsion based on vinyl/acrylic that can be used in wool insulation adhesives, self-adhesive coatings, flooring adhesives, and interior or exterior emulsion paints and coatings. This product is compatible with organic resins and features a good balance of shear strength and residual tack. It adheres well to aluminum. view less | |
VINAVIL® 5603P | VINAVIL Americas Corp. | VINAVIL® 5603P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/ethylene colloid that can be used in tile adhesives and grouts requiring deformability. It can also be used in cements, mortars, paints, and plasters. This product i...view more VINAVIL® 5603P, in the form of a redispersible, free-flowing powder, is a vinyl acetate/ethylene colloid that can be used in tile adhesives and grouts requiring deformability. It can also be used in cements, mortars, paints, and plasters. This product is particularly indicated for gypsum plasters, because the colloid improves the water-resistance, flexural strength, and mechanical resistance of finite products. view less | |
VINAVIL® 5705 | VINAVIL Americas Corp. | VINAVIL® 5705, in the form of a transparent, clear, and non-tacky film, is a styrene/acrylic copolymer emulsion that can be used in cementitious waterproofing membranes. This product has compatibility with many cementitious adhesives and organic binders ...view more VINAVIL® 5705, in the form of a transparent, clear, and non-tacky film, is a styrene/acrylic copolymer emulsion that can be used in cementitious waterproofing membranes. This product has compatibility with many cementitious adhesives and organic binders used in the formulation of construction adhesives. view less | |
VINAVIL® 5706 | VINAVIL Americas Corp. | VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and ...view more VINAVIL® 5706, in the form of a clear, slightly tacky film, is an elastomeric styrene/acrylic copolymer containing high solids that can be used in wood flat paints and primers, flexible coatings, waterproof membranes, interior or exterior wall paints and plasters, and flooring adhesives. This product will improve the water-resistance, the flexibility and adhesion to different substrates of cement-based systems. view less | |
VINAVIL® 5707 LP 28 | VINAVIL Americas Corp. | VINAVIL® 5707 LP 28, in the form of a transparent, clear and flexible film, is a modified styrene/acrylic latex that can be used in water-based coatings, especially for exterior wood applications. It can also be used as a wood sealer or as a protective c...view more VINAVIL® 5707 LP 28, in the form of a transparent, clear and flexible film, is a modified styrene/acrylic latex that can be used in water-based coatings, especially for exterior wood applications. It can also be used as a wood sealer or as a protective coating. This product is compatible with any paint additive on the market and is presented in an anionic emulsifying system. view less | |
VINAVIL® 5713 | VINAVIL Americas Corp. | VINAVIL® 5713, in the form of a bright, flexible and tacky film, is a styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and in mortar additives for the cement industry. It can also be used in flexible waterproof coatin...view more VINAVIL® 5713, in the form of a bright, flexible and tacky film, is a styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and in mortar additives for the cement industry. It can also be used in flexible waterproof coatings, caulks and sealants, and in flooring adhesives. view less | |
VINAVIL® 5720 | VINAVIL Americas Corp. | VINAVIL® 5720, in the form of a transparent, clear, and non-tacky film, is a styrene/acrylic copolymer emulsion that can be used in wood flatting and primer paints. This product is compatible with many types of cementitious adhesives as well as organic b...view more VINAVIL® 5720, in the form of a transparent, clear, and non-tacky film, is a styrene/acrylic copolymer emulsion that can be used in wood flatting and primer paints. This product is compatible with many types of cementitious adhesives as well as organic binders used in the formulation of construction adhesives. view less | |
VINAVIL® 5722 | VINAVIL Americas Corp. | VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in wa...view more VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in waterproofing membranes, wood flatting and primers, and in pressure-sensitive adhesives. view less | |
VINAVIL® 5810 | VINAVIL Americas Corp. | VINAVIL® 5810, in the form of a clear, flexible film, is a surfactant-stabilized all acrylic polymer emulsion that can be used in coatings, as a driveway sealer, and in the construction, paper, and textile printing industries. It can also be used in inte...view more VINAVIL® 5810, in the form of a clear, flexible film, is a surfactant-stabilized all acrylic polymer emulsion that can be used in coatings, as a driveway sealer, and in the construction, paper, and textile printing industries. It can also be used in interior or exterior wall paints and plasters. This product has low viscosity and is weather-resistant. view less | |
VINAVIL® 5815 | VINAVIL Americas Corp. | VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applicati...view more VINAVIL® 5815, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives, as a cement additive, and in textile printing applications. This product is compatible with cement adhesives and additives that are used in the formulations of coatings or adhesives. view less | |
VINAVIL® 5816 | VINAVIL Americas Corp. | VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing memb...view more VINAVIL® 5816, in the form of a transparent, bright, flexible and non-tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used as a binder for paint and construction adhesives. It can also be used in cementitious waterproofing membranes and in textile printing applications. This product is compatible with cement adhesives as well as additives used in coating or adhesive formulations. view less | |
VINAVIL® 5844 | VINAVIL Americas Corp. | VINAVIL® 5844, in the form of a clear, non-tacky film, is an anionic/non-ionic acrylic core-shell copolymer emulsion that can be used in caulks and roof coatings. It can also be used in wood flatting paints and primers, pressure-sensitive adhesives, floo...view more VINAVIL® 5844, in the form of a clear, non-tacky film, is an anionic/non-ionic acrylic core-shell copolymer emulsion that can be used in caulks and roof coatings. It can also be used in wood flatting paints and primers, pressure-sensitive adhesives, floor adhesives, and cementitious waterproofing membranes. This product is water-resistant. view less | |
VINAVIL® 5845 | VINAVIL Americas Corp. | VINAVIL® 5845, in the form of a transparent, tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used in flexible coating and waterproofing membranes, floor adhesives, cementitious waterproofing membranes, caulks, and roof coatings....view more VINAVIL® 5845, in the form of a transparent, tacky film, is an anionic/non-ionic acrylic copolymer emulsion that can be used in flexible coating and waterproofing membranes, floor adhesives, cementitious waterproofing membranes, caulks, and roof coatings. This product is compatible with cementitious binders and organic resins that are used in the manufacture of construction adhesives or coatings. It is water resistant and shows high tack. view less | |
VINAVIL® 6713 | VINAVIL Americas Corp. | VINAVIL® 6713, in the form of a white, non-tacky film, is a modified styrene/acrylic copolymer emulsion containing high solids that can be used in flexible coating and waterproofing membranes. This product is in an anionic/non-ionic emulsifying system. ...view more VINAVIL® 6713, in the form of a white, non-tacky film, is a modified styrene/acrylic copolymer emulsion containing high solids that can be used in flexible coating and waterproofing membranes. This product is in an anionic/non-ionic emulsifying system. THe finished product dries quickly and is compatible with flexible latex/cement mortars. view less | |
VINAVIL® CRILAT 1815 | VINAVIL Americas Corp. | VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a ...view more VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a pigment binder in textile screen printing applications. It is resistant to chlorinated solvents. view less | |
VINAVIL® K40 | VINAVIL Americas Corp. | VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, ...view more VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
VINAVIL® K50 | VINAVIL Americas Corp. | VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments,...view more VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
VINAVIL® K55 | VINAVIL Americas Corp. | VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments,...view more VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
VINAVIL® K60 | VINAVIL Americas Corp. | VINAVIL® K60, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in ord...view more VINAVIL® K60, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
VINAVIL® K70 | VINAVIL Americas Corp. | VINAVIL® K70, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in ord...view more VINAVIL® K70, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
VINAVIL® PA2000 | VINAVIL Americas Corp. | VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, ...view more VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, or sodium hydroxides at a pH between 7.0 and 10.0. view less | |
VINAVIL® SA | VINAVIL Americas Corp. | VINAVIL® SA is a water-dispersion of polyvinyl acetate containing anionic surfactants that can be used in paper adhesives and textile laminations. It can also be used in the manufacture of water-based paints or textile substrates. This product has good ...view more VINAVIL® SA is a water-dispersion of polyvinyl acetate containing anionic surfactants that can be used in paper adhesives and textile laminations. It can also be used in the manufacture of water-based paints or textile substrates. This product has good mechanical stability and compatibility with pigments and fillers. view less | |
VINAVIL® T05 PA | VINAVIL Americas Corp. | VINAVIL® T05 PA, in the form of a beige powder, is a polyvinyl alcohol colloid based on vinyl acetate/vinyl-versatate copolymers that can be used in tile adhesives, wallpaper adhesives, cement-based mortars, and paints and plasters. This product is compa...view more VINAVIL® T05 PA, in the form of a beige powder, is a polyvinyl alcohol colloid based on vinyl acetate/vinyl-versatate copolymers that can be used in tile adhesives, wallpaper adhesives, cement-based mortars, and paints and plasters. This product is compatible with cementitious binders and gypsum-based materials used in the formation of construction mortars. view less | |
VINAVIL® VV10Z | VINAVIL Americas Corp. | VINAVIL® VV10Z, in the form of a free-flowing beige powder, is a vinyl-versatate/vinyl-acetate copolymer in a polyvinyl alcohol colloid that can be used in paints and plasters, cements, mortars, and self-leveling compounds. This product should be mixed w...view more VINAVIL® VV10Z, in the form of a free-flowing beige powder, is a vinyl-versatate/vinyl-acetate copolymer in a polyvinyl alcohol colloid that can be used in paints and plasters, cements, mortars, and self-leveling compounds. This product should be mixed with dry products and stored in a water-resistant container. On contact with water, and under the action of mechanical shear, it reproduces the original dispersion. view less |