| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...view more Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. view less | |
| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...view more Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. view less | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...view more CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. view less | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...view more CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. view less | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...view more CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. view less | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...view more CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. view less | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. view less | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...view more CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. view less | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...view more CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. view less | |
| CHS-Epoxy 381 X 90 | Spolchemie | CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...view more CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. view less | |
| CHS-Epoxy 501 | Spolchemie | CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...view more CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. view less | |
| CHS-Epoxy 508 | Spolchemie | CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...view more CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. view less | |
| CHS-Epoxy 514 | Spolchemie | CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...view more CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. view less | |
| CHS-Epoxy 520 X 90 | Spolchemie | CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is...view more CHS-Epoxy 520 X 90 is a solution that is 90 percent xylene. It is solution of a modified low molecular weighted epoxy resin based on BPA. CHS-Epoxy 520 X 90 has an epoxide equivalent weight (EEW) range of 182-192 g/mol. The primary use for this product is for producing solid paints and manufacture anticorrosive coatings and enamels. view less | |
| CHS-Epoxy 571 | Spolchemie | CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating mater...view more CHS-Epoxy 571 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 571 is primarily used for laminating, saturating, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. view less | |
| CHS-Epoxy 572 | Spolchemie | CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating mater...view more CHS-Epoxy 572 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 572 is primarily used for laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. view less | |
| CHS-Epoxy 573 | Spolchemie | CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insula...view more CHS-Epoxy 573 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. CHS-Epoxy 573 is primarily used for coatings, laminating, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. view less | |
| CHS-Epoxy 574 | Spolchemie | CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applicatio...view more CHS-Epoxy 574 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 574 is primarily used for coatings, lamination, penetrates, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. view less | |
| CHS-Epoxy 575 | Spolchemie | CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applicatio...view more CHS-Epoxy 575 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a bi-functional reactive diluent. CHS-Epoxy 575 is primarily used for coatings, lamination, penetrants, forming applications in civil and electrical engineering, construction of insulating materials, anticorrosion paints. view less | |
| SiSiB® PC5420 | SiSiB SILICONES | SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second back...view more SiSiB® PC5420 is a colorless, low-viscosity liquid with an SiO2 content of 28.5%. It is the ethyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less | |
| SiSiB® PC5423 | SiSiB SILICONES | SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hy...view more SiSiB® PC5423 is a transparent liquid containing 32% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is used to deposit silicic acid formed as a result of complete hydrolysis; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinker component in cold curing silicone rubber systems; as a hardening component in dentistry for impression materials and as binder for embedding material; or as a binder in precision foundry industry. view less | |
| SiSiB® PC5424 | SiSiB SILICONES | SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5424 is a transparent liquid containing 40% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| SiSiB® PC5425 | SiSiB SILICONES | SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...view more SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry view less | |
| SiSiB® PC5881 | SiSiB SILICONES | SiSiB® PC5881 is a colorless transparent liquid. It is a long-chain alkyl silane, commonly called OTMS. It is used as a coupling agent to deal with inorganic chemicals to improve their blending with organic matter and water-proof them, in the fog-proof ...view more SiSiB® PC5881 is a colorless transparent liquid. It is a long-chain alkyl silane, commonly called OTMS. It is used as a coupling agent to deal with inorganic chemicals to improve their blending with organic matter and water-proof them, in the fog-proof preparation of glass, and to protect historical relics or other products from corrosion, freeze, or efflorescence associated with the introduction of water. view less | |
| SiSiB® PC6120 | SiSiB SILICONES | SiSiB® PC6120, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize ...view more SiSiB® PC6120, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers; in the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; or in sealants. view less |
