YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings.
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...view more
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. view less
Chlorinated Rubber-YURON CR 10 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 8-13 mpa.s at 25°C.
Chlorinated Rubber-YURON CR 20 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 13-18 mpa.s at 25°C.
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...view more
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...view more
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters.
YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins.
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...view more
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. view less
YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins.
D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...view more
D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. view less
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...view more
D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. view less
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...view more
D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. view less
D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...view more
D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...view more
D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...view more
D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. view less
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...view more
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...view more
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...view more
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1....view more
LT-172 is a vinyl tris (β-methoxyethoxy) silane functioning agent. This product can improve the corrosion resistance for various mineral-filled polymers and adhesion of coatings on glass, metal, or ceramic surfaces. Its density at 25 degrees Celsius is 1.04 g/ml. view less
LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...view more
LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. view less
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...view more
LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. view less
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...view more
LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. view less
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...view more
LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. view less
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...view more
LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. view less
LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability.
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...view more
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.