YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings.
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good...view more
Chlorinated PVC-YURON CPVC is deeply chlorinated by PVC resin through the International leading aqueous phase suspension method. It has good solubility with toluene, xylene and a variety of aromatic hydrocarbon, ketone solvents. This product also has good acid and alkali resistance, weather resistance, water resistance, oil resistance, cold resistance and flame resistance. It also has good compatibility with most resins such as alkyd resin, acrylic resin, chlorinated rubber resin and high chlorinated polyethylene resin. view less
Chlorinated Rubber-YURON CR 10 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 8-13 mpa.s at 25°C.
Chlorinated Rubber-YURON CR 20 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 13-18 mpa.s at 25°C.
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...view more
YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...view more
YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. view less
YURON CR-22 is a chlorinated rubber product supplied as a white powder. It is mainly added to solventborne contact adhesives. It is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters.
YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins.
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most ester...view more
YURON CR-400 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene and it is also soluble in most esters. view less
YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins.
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...view more
High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...view more
High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas.
HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...view more
YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more
High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less
ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more
ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less
ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more
ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less
ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more
ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less
ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more
ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less
ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more
ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less
ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more
ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less
ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more
ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less
ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more
ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less
ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more
ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less
ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more
ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less
ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more
ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less
ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more
ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less
ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more
ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less
RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more
RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. view less
RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more
RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. view less
RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more
RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. view less
RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more
RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. view less
RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more
RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. view less
This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability.
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...view more
This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
